Ting Liu [Fri, 15 Jul 2016 16:35:47 +0000 (00:35 +0800)]
u-boot-qoriq: Add host compiler flags
U-Boot will compile its own tools during the build, with specific
configurations (aka when CONFIG_FIT_SIGNATURE is enabled) the host tools
require openssl. This patch adds 'openssl' as a PACKAGECONFIG that
enables the use of openssl-native as a dependency and also adds the
HOSTCC flags that U-Boot uses when compiling the host tools.
Ting Liu [Fri, 15 Jul 2016 16:35:42 +0000 (00:35 +0800)]
u-boot-qoriq: upgrade to 2016.01 plus fsl patches
The main features are:
* Upgrade to 2016.01
* On ARM platforms, the U-Boot image includes the device tree
* Non-secure and Secure Boot (ESBC)
* Primary Protected Application (PPA) firmware integration [LS1043A]
* Clock, CPLD, DUART, DDR3, DDR4, DSPI, eSDHC, GIC-400, GIC-500, I2C, OCRAM, PCIe, USB 2 & 3, SATA, UART
* Networking support using eTSEC, FMAN Independent Mode or DPAA2 networking
* DCU, eMMC 4.5, I2C3, LPUART, QSPI [LS1021A]
* eLBC and IFC access to NOR and NAND flash
* Boot from NOR, NAND flash, eSPI, SDHC
* Boot from SRIO [B4860, P5020, P4080]
* Voltage ID (board specific)
* CodeWarrior debug patch for U-Boot
Detailed commit log can be found at:
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/log/?h=sdk-v2.0.x
Signed-off-by: Ting Liu <ting.liu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Ting Liu [Fri, 15 Jul 2016 16:31:30 +0000 (00:31 +0800)]
ls1043ardb: add machine file
The LS1043A Reference Design Board (RDB) is a high-performance computing,
evaluation, and development platform that supports the QorIQ LS1043A
LayerScape Architecture processor. The LS1043ARDB provides SW development
platform for the Freescale LS1043A processor series, with a complete
debugging environment. The LS1043A RDB is lead-free and RoHS-compliant.
The LS1043A integrated multicore processor combines four ARM Cortex-A53
processor cores with datapath acceleration optimized for L2/3 packet
processing, single pass security offload and robust traffic management
and quality of service.
For detailed info, please visit:
http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/qoriq-arm-processors/qoriq-ls1043a-reference-design-board:LS1043A-RDB
Signed-off-by: Ting Liu <ting.liu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The LS2080A Reference Design (RDB) is a high-performance computing,
evaluation, and development platform that supports the QorIQ LS2080A
Layerscape Architecture processor.
The LS2080A integrated multicore processor combines eight ARM Cortex-A57
processor cores with high-performance data path acceleration logic and network
and peripheral bus interfaces required for networking, telecom/datacom,
wireless infrastructure, and mil/aerospace applications.
For detailed info, please visit:
http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/qoriq-arm-processors/qoriq-ls2080a-rdb-reference-design-board:LS2080A-RDB
Signed-off-by: Zongchun Yu <zongchun.yu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Besides the 2016.07 final changes, this includes following new
commits:
20b081a usbarmory: Add board_run_command() function 19900ff usbarmory: switch to using kernel zImage 9f616f6 imx6: clock: typo fix 6874a9e arch-mx6: fix MX6_PAD_DECLARE macro to work with MX6 duallite 5f816d8 pico-imx6ul: Add USB Host support 3a09cf7 video: allow version string to be optional when using LOGO
Change-Id: I5d3da661ef6f8e0a766950bb4fcecc7813a19a46 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Otavio Salvador [Mon, 11 Jul 2016 11:17:52 +0000 (08:17 -0300)]
linux-fslc-imx: Fix DESCRIPTION to mention 4.1.15-1.0.0 GA as based
The base kernel has been updated for the 4.1.15-1.0.0 GA but the
DESCRIPTION has not been updated when updating the recipes, this fixes
that so the DESCRIPTION in the generated packages and release notes
are right.
Change-Id: Id7539aa65f5466f0bd285766931d4648b0445e44 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Otavio Salvador [Mon, 11 Jul 2016 11:06:45 +0000 (08:06 -0300)]
gstreamer1.0-plugins-bad: Remove PACKAGE_ARCH override for i.MX7 and i.MX6UL
The CFLAGS and PACKAGECONFIG changes are applied just for i.MX6 Q, DL,
SX and SL so we can remove the PACKAGE_ARCH override for the i.MX7 and
i.MX6UL as those are unaffected.
Change-Id: Ice33fd3a12566875f9ec2559d0a044f38916d244 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
With the upgrade to gstremaer 1.8.x this patch does no longer apply.
Upstream changed to install the headers required, so the patch is also
no longer needed:
https://cgit.freedesktop.org/gstreamer/gst-plugins-bad/commit?h=1.8&id=c87a7e266732ab9a0bd0e5a5c104b06d0f1a2072
Otavio Salvador [Mon, 4 Jul 2016 19:13:22 +0000 (16:13 -0300)]
imx7dsabresd: Fix the boot of a NXP kernel
Booting a NXP kernel with mainline U-boot leads to the following
kernel crash:
,----
| caam: probe of 30900000.caam failed with error -11
| Unable to handle kernel NULL pointer dereference at virtual address 00000004
| pgd = 80004000
| [00000004] *pgd=00000000
| Internal error: Oops: 805 [#1] PREEMPT SMP ARM
`----
This happens because NXP kernel expects MX7 to boot in secure mode,
so introduce mx7dsabresd_secure_defconfig that selects CONFIG_MX7_SEC
and allows booting a NXP provided kernel successfully.
Change-Id: Ic05912c1328c75e8e25c89e7543b67c8c214e20d Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Otavio Salvador [Mon, 4 Jul 2016 18:12:21 +0000 (15:12 -0300)]
linux-fslc-imx: Disable Vivante GPU support
The Vivante GPU is used as kernel module for all i.MX6, by default, so
the defconfig should not enable it as other SoC (as i.MX6UL and
i.MX7D) uses the same defconfig and does not have the Vivante GPU.
This avoids the built-in driver build for other SoCs, thus fixing a
build error with GCC 6, which is hidden when using the external
module.
Change-Id: Ib12cfe494d75b6407eaf72c386094cc03606c7f8 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Otavio Salvador [Mon, 4 Jul 2016 17:20:18 +0000 (14:20 -0300)]
fsl-vivante-kernel-driver-handler.bbclass: Allow build for non-i.MX6
When building for non-i.MX6, we ought to assume the SoC does not has
Vivante GPU at all, or the build will fail. This fixes the build of
linux-fslc-imx-rt for i.MX7D as it does not have a Vivante GPU.
Change-Id: Ic8fc4808880aca381e88f6e1b6c52416bb4520c4 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Changelog: af0a2a1 B4:DSP_BT: Add new DDRC target ID configuration parameter c8a84c6 B4:L1D: Add support for L1 defense New flow 8e79e5c B4:DSP_BT: DSP cache-cluster init now done from DSP boot loader 44da44a B4:DSP_BT: Add support for DSP MMU configuration
Signed-off-by: Ting Liu <ting.liu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Max Krummenacher [Thu, 23 Jun 2016 22:52:10 +0000 (00:52 +0200)]
libimxvpuapi: use libdir from cross environment
Pass $libdir to 'waf configure' to prevent using the build hosts libdir.
Fixes:
WARNING: libimxvpuapi-0.10.2-r0 do_package: QA Issue: libimxvpuapi: Files/directories were installed but not shipped in any package:
/usr/lib64/libimxvpuapi.so
/usr/lib64/libimxvpuapi.so.0
/usr/lib64/libimxvpuapi.so.0.10.2
/usr/lib64/pkgconfig
/usr/lib64/pkgconfig/libimxvpuapi.pc
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Adrian Dudau [Fri, 10 Jun 2016 10:34:38 +0000 (12:34 +0200)]
fsl-kernel-localversion: Configure kernel in a separate task
As it is implemented right now this class overwrites the .config file
making it impossible for any other layer to configure the kernel in a
.bbappend to the kernel recipe. By doing it in a separate task before
do_configure we ensure that recipe .bbappends can make further kernel
configurations in do_configure_prepend.
Signed-off-by: Adrian Dudau <adrian.dudau@enea.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Zhenhua Luo [Fri, 3 Jun 2016 07:49:39 +0000 (15:49 +0800)]
linux-qoriq: exclude DATETIME from vardepsexclude of ZIMAGE_BASE_NAME to fix taskhash mismatch issue
The siggen.py checks the task hash, DATETIME dependency causes Taskhash
mismatch error, exxclude DATETIME variable from vardepsexclude of
ZIMAGE_BASE_NAME.
Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Zhenhua Luo [Fri, 3 Jun 2016 07:49:38 +0000 (15:49 +0800)]
u-boot: fix build error under gcc6
Fix the following build error under gcc6:
| ../include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
| #include gcc_header(__GNUC__)
Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Zhenhua Luo [Fri, 3 Jun 2016 07:49:36 +0000 (15:49 +0800)]
skmm-ep: fix the build error caused by duplicated definition
Remove the duplicated definition to fix the following build errors:
| apps/skmm/lib/skmm_sram.c:42:18: error: redefinition of 'pa_to_va'
| apps/skmm/lib/skmm_sram.c:51:20: error: redefinition of 'va_to_pa'
Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Zhenhua Luo [Fri, 3 Jun 2016 07:49:33 +0000 (15:49 +0800)]
eth-config: fix host contamination warnings
Fix the following host contamination warnings:
| eth-config: /eth-config/xxx is owned by uid 1000, which is the same as
| the user running bitbake. This may be due to host contamination
| [host-user-contaminated]
Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Lauren Post [Fri, 27 May 2016 23:10:50 +0000 (18:10 -0500)]
xf86-video-imxfb-vivante: Upgrade to 5.0.11.p8.4
Fix to fallback to software path when transform is not supported
Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Tom Hochstein [Thu, 12 May 2016 16:45:50 +0000 (11:45 -0500)]
weston: Rebase Vivante patch for Yocto 2.2
Change-Id: Ideb91234d9aba465968f278955e74c13248cc1c7 Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Otavio Salvador [Tue, 3 May 2016 16:58:53 +0000 (13:58 -0300)]
imx-gpu-viv: Ensure the Wayland backend provides Xorg driver
For the XWayland use, we ought to avoid installing the Xorg Vivante
driver so we make the Wayland backend to provide it so the runtime
dependency is satisfied.
Change-Id: Id92afcb8ad611db8b4b26a952bbf93ad86a46924 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Otavio Salvador [Sat, 13 Feb 2016 12:29:21 +0000 (10:29 -0200)]
imx-base: Improve sstate signature handling for BSP packages
There are BSP packages which can have some dependencies removed from
the sstate signature; this is beneficial as it reduces a lot the build
time and increases the binaries reuse.
Following changes are done:
- Mark kernel-module-imx-gpu-viv and safe for imx-gpu-viv
- Mark imx-vpu as safe for libimxvpuapi
- Mark imx-vpu as safe for imx-vpuwrap
- Mark imx-vpu as safe for imx-codec
- Mark imx-vpu as safe for imx-test
Change-Id: I1625d1e4d1cda529069c2d88218c4c84844ee4a8 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Otavio Salvador [Fri, 12 Feb 2016 19:57:02 +0000 (17:57 -0200)]
imx-vpu: Set PACKAGE_ARCH to MACHINE_ARCH
The imx-vpu is a machine specific package, as it depends on the kernel
for build. We are going to change the PACKAGE_ARCH of it to be
MACHINE_SOCARCH as the interface provided by it is stable thus not
requring that the library users to be rebuild.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Yuqing Zhu [Wed, 4 May 2016 09:43:02 +0000 (17:43 +0800)]
pulseaudio: Remove the control for speaker/headphone widget for i.MX7D
In order to fix issue "headphone volume will be set to zero when pulseaudio
can't detect the headphone jack status", remove the control in configuration file.
Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Otavio Salvador [Wed, 11 May 2016 20:45:11 +0000 (17:45 -0300)]
u-boot-fslc: Update to 2016.05-based fork
The U-Boot 2016.05 is close to release and it is time to upgrade. This
includes following changes on top of upcoming release, which are Yocto
Project related:
0fcd279 wandboard: Drop revision specific DeviceTree support 0ab586a mx6sabresd: Enable video interfaces in bootargs 5976978 Revert "embestmx6boards: convert to use config_distro_bootcmd.h" 91f4fa5 iMX6: Change mmcroot to use fixed mmc block index for USDHC 968d872 embestmx6boards: Change default bootenv configuration 3233072 mx6sabresd: Use LDO dtb file until LDO bypass support is added df5f668 mx6slevk: Use LDO dtb file until LDO bypass support is added
The following changes are included here, and queued for U-Boot 2016.07
release:
a858d98 ARM: mx6: Enable MMC and SATA extfs boot support 70f4d22 SPL: Add CONFIG_SPL_ABORT_ON_RAW_IMAGE 5054e50 SPL: Let spl_parse_image_header() return value bf9c724 imx: imx-common: print i.MX 7 SoC names consistently dd6d9db imx: imx7d: fix ahb clock mux 1 24f4bb6 imx: iomux-v3: fix UART input selects 83609b3 ARM: mx6: Enable STDIO deregistering on Novena 0fc4e56 imx: mx6: mx6sl_pins: add GPIO variant for SD1_DAT5 ffae8c1 imx: tools: imximage: fix CLR bit command
Change-Id: I82aba59b47dfe530a6a1243f3227b914b973205f Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Yuqing Zhu [Mon, 9 May 2016 08:53:00 +0000 (16:53 +0800)]
asound.state: Update to 4.1.15-1.1.0
--Update wm8960audio configuration for mx6ul/mx7
1."Capture Switch" has been enabled, and 'Capture Volume' will make sense.
The current 'Capture Volume' value is the max value 63. So need to modify
the capture volume.
2.Add ADC data output select.
3.Remove amixer control 'Headset Jack' as mx7d-sdb doesn't have it.
--Adding sii902xaudio configuration for mx7
Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
