Bruce Ashfield [Fri, 8 May 2015 03:36:15 +0000 (23:36 -0400)]
kernel-yocto: propagate in tree defconfigs to WORKDIR
As reported by Steffen Pankratz <Steffen.Pankratz@elektrobit.com>, the
previous logic of KBUILD_DEFCONFIG processing would not propagate an in
tree defcofig to WORKDIR if one was not already present.
We fix the propagation by copying the in tee config if a defconfig is
not already in WORKDIR.
Additionally we only warn (versus copying) if an in tree configuration
is specified, is different than the WORKDIR version and isn't copied.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 8 May 2015 03:36:13 +0000 (23:36 -0400)]
linux-yocto/3.14: fix qemumips build error
Updating the SRCREVs to import the following fix:
mips: define cpu_has_saa in common features include
To avoid build failures such as the following on non-cavium
platforms:
| arch/mips/include/asm/atomic.h: In function 'atomic_add':
| arch/mips/include/asm/atomic.h:52:6: error: 'cpu_has_saa'
| undeclared (first use in this function)
| if (cpu_has_saa) {
| ^
We define a disabled cpu_has_saa unless the machine specific feature
overrides define a value.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 8 May 2015 03:36:14 +0000 (23:36 -0400)]
linux-yocto: fix race between checkout and meta data generation
There are two tasks that must run before a linux-yocto kernel is built.
- Kernel checkout and relocation to work-shared (kernel_checkout)
- Meta data gathering and configuration prep (kernel_metadata)
The current task definitions for both are simply "before do_patch",
which is correct, but kernel_checkout must run before and not race with
kernel_metadata.
So we set the definition of kernel_checkout to be more specific and
enforce the proper ordering.
[YOCTO: #7731]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 8 May 2015 03:36:12 +0000 (23:36 -0400)]
linux-yocto/3.19: Braswell support and bug fixes
Updating to include the following commits:
a4d0c407cced dmaengine: dw: don't handle interrupt when dmaengine is not used e92b2ce791b2 dmaengine: dw: define DW_DMA_MAX_NR_MASTERS 931304a6567e dmaengine: dw: provide DMA capabilities 468bad4f7a6f dmaengine: dw: Split device_control b4afd7710db7 i2c: i801: Use managed pcim_* PCI device initialization and reservation d81a8a11ecba i2c: i801: Remove pci_enable_device() call from i801_resume() 40e18604e70c i2c: i801: Use managed devm_* memory and irq allocation b54f65dbe57b i2c: i801: Remove i801_driver forward declaration e95740d4d079 i2c: i801: Don't break user-visible strings 423e98721e04 ACPI: Introduce has_acpi_companion() 291f620dc052 i2c: designware: Suppress error message if platform_get_irq() < 0 cf5ff51a8e3f i2c: designware-pci: no need to provide clk_khz 4f583ce420d3 i2c: designware-pci: remove Moorestown support e000c549c9d8 i2c: designware: Add Intel Baytrail PMIC I2C bus support 7ffbd9ca19a7 i2c: designware: fixup return handling of wait_for_completion_timeout 5758d5a1df32 i2c: designware: Do not calculate SCL timing parameters needlessly 2f58fcae92db i2c: designware: Add i2c bus locking support 84a73e51e900 i2c: designware: use {readl|writel}_relaxed instead of readl/writel f672bb8424e6 serial: 8250_dw: Fix get_mctrl behaviour 91bd64585489 serial: 8250: add support for ACPI-probed serial port for X-Gene platform 1190cba71f09 serial:8250:8250_pci: delete unneeded quirk entries 6405a4b71451 serial:8250:8250_pci: fix redundant entry report for WCH_CH352_2S 0a1a31bbbc19 serial: 8250_pci: remove one useless explicit type conversion 4edc52a55f82 intel_idle: Add support for the Airmont Core in the Cherrytrail and Braswell SOCs 934f85e8bfdb x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug c6a3440252a8 ACPI / LPSS: check the result of ioremap() 6aacc0c931b7 pinctrl: update direction_output function of cherryview driver cb4a43a2177d pinctrl: cherryview: Configure HiZ pins to be input when requested as GPIOs 0df22c007ce1 pinctrl: intel: drop owner assignment from platform_drivers 07b16f04700b pinctrl: cherryview: Save and restore pin configs over system sleep e8e5cfffa231 pinctrl: baytrail: Save pin context over system sleep 04cb3cc0ff21 pinctrl: baytrail: Rework interrupt handling 4cac25d2574d pinctrl: baytrail: Clear interrupt triggering from pins that are in GPIO mode eacab9ab234a pinctrl: baytrail: Relax GPIO request rules
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Thu, 7 May 2015 14:30:54 +0000 (15:30 +0100)]
bind: disable the HTTP statistics service by default
Rename the "libxml2" PACKAGECONFIG to "httpstats" so that is is meaningful, and
disable it by default as a web frontend to the server statistics shouldn't be
enabled by default.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Roy Li [Mon, 4 May 2015 08:43:39 +0000 (16:43 +0800)]
bind: upgrade to 9.10.2
1. Remove two unneeded CVE patches, 9.10.2 fixed the CVE-2015-1349 also
2. Remove bind-subdirs-run-serially.patch and cross-build-fix.patch,
similar fixes are merged into 9.10.2
3. update the dont-test-on-host.patch
4. update the Copyright file checksum, since the date in it has been changed.
5. replace the hardcode lib dir with $base_libdir in bind-add-crosscripts*.patch
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 7 May 2015 13:52:25 +0000 (14:52 +0100)]
oe-selftest: devtool: add a proper test to see if tap devices exist
Check up front in test_devtool_deploy_target whether the tap devices
exist and skip if not. If we don't do this we get a significantly less
comprehensible error via pexpect.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 7 May 2015 13:52:24 +0000 (14:52 +0100)]
devtool: fix for rename of gcc-source
After OE-Core commit 67db7182faf6742b0d971d61d8c5ba34f69d2e12, PV is
appended to the end of the gcc-source PN, thus we need to handle that in
devtool and the corresponding test.
Part of the fix for [YOCTO #7729].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Wed, 6 May 2015 07:04:59 +0000 (00:04 -0700)]
libart-lgpl: Fix cross compiling
We use standard ISO C data types and get rid of configure guess work
which is iffy in cross compiled environment. Cleans up the re-build as well
since we were deleting art_config.h without considering if the file is
there in first place or not.
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Wed, 6 May 2015 20:28:39 +0000 (23:28 +0300)]
kernel.bbclass: Fix race condition
Race condition between do_compile_kernelmodules and do_shared_workdir
tasks occurs when do_compile_kernelmodules changes files in
include/generated/* while do_shared_workdir tries to copy them to
shared working directory.
Fixed race by moving do_shared_workdir after do_compile but before
do_compile_kernelmodules.
[YOCTO #7321]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Wed, 6 May 2015 16:19:27 +0000 (17:19 +0100)]
classes/buildstats: misc cleanups
* Rename BNFILE and DEVFILE so that they are clearly specific to this
class, since they end up in the global scope
* Use "with open" when opening files consistently
* Use getVar('PF', True) instead of expand('${PF}')
* Drop some unnecessary assignments
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Wed, 6 May 2015 16:19:26 +0000 (17:19 +0100)]
classes/buildstats: don't catch all errors from mkdirhier
mkdirhier() doesn't raise an exception if the directory exists, so if it
does raise one we should just be failing, otherwise we're just going
to hit errors later anyway.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga [Wed, 6 May 2015 15:21:47 +0000 (18:21 +0300)]
runqemu-internal: correctly set format for root FS as raw
qemu guesses via probing the format of root FS, but
gives a warning and restricts write operations on block 0.
So fix it by setting correctly the format as raw.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python3: Disable pip to fix issues on the Autobuilders
As Python-3.4 pip is required and installed by default, pips installation
is bootstrapped using python wheels, this makes it complicated to patch,
by default the installation uses an absolute path to /tmp, on most cases
this would not be a problem, but since on the Autobuilders several Python
installations (for different archs) may be happening at the same time,
this shared resource utilization results in errors at do_install(), this
patch disables pip installation by default for now, until we have a
python3-pip package which we can easily patch in these situations.
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python3-native: Disable pip on native builds to fix Autobuilder issues
As Python-3.4 pip is required and installed by default, pips installation
is bootstrapped using python wheels, this makes it complicated to patch
and causes errors on the Autobuilders, since we don't need pip for
python3-native, this disables it fixing the issues.
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python3-native: Fix pip install issue due to unclean build directory
When installing python3-native sometimes pips default build
directory (which is on the host and is user dependant) is left unclean,
due to this, when python3-core is being installed it tries to use
the same directory producing an error, this explicitly removes
what the previous installation might have left behind, fixing the issue.
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modifies:
python3-native_3.3.3.bb -> python3-native_3.4.2.bb: Updates checksums, version, patches
and SRC_URIs to use xz format, LICENSE did not change, dates were updated, adds fix for
ctypes/libffi needed for pip <- required since Python 3.4 (see PEP #453).
python3_3.3.3.bb -> python3_3.4.2.bb: Updates checksums, version, patches and SRC_URIs
to use xz format, adds fix for ctypes/libffi, fixes oe_multilib_header() call,
adds python3-core as RDEPENDS to python3-misc to avoid QA issue.
generate-manifest-3.4.py - > generate-manifest-3.4.py: fixes reprlib,
adds _sitebuiltins and _collections_abc <- formerly part of collections, separated since 3.4
python-3.3-manifest.inc -> python-3.4-manifest.inc
Peter Seebach [Mon, 4 May 2015 20:55:49 +0000 (15:55 -0500)]
pseudo 1.6.5: less pointlessly chatty
There was a stupid logic error controlling the diagnostic for
a "possible" mismatch involving trailing slashes and whether or
not a node was believed to be a directory. Specifically, a diagnostic
got printed any time a lookup for a directory *didn't* have a
trailing slash, as well as in the (actually intended) case where
a non-directory lookup *did*.
No other changes, but that one is probably significant.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 3 May 2015 10:27:24 +0000 (11:27 +0100)]
directfb: Improve CFLAGS handling for x86
The problem with filter_out is that it expands the variable meaning overrides
to sub components can get lost. This has happening to the security flags
meaning directfb failed in lsb builds.
Use _remove instead of filter_out since it gives much more predictable results.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BlueZ 4.x and associated recipes
are now obsolete.
(bluez4,bluez-hcidump, gst-plugin-bluetooth).
Will be moved into recipes-connectivity
collection of meta-openembedded.
BlueZ 4.x is still usable in poky/YP.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 2 May 2015 09:04:37 +0000 (10:04 +0100)]
multilib: Tweak value of PN used for OVERRIDES
Currently, PN is used in overrides which is expanded to have a MLPREFIX. This
means and pn- overrides without the prefix would be ignored which is not what
is usually expected.
We noticed huge problems using poky-lsb with multilib since the per recipe
overrides were not applied. This adds in handling for PN with and without
the prefix. This should unbreak world-lsb builds on the autobuilder.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libart_lgpl: Allow art_config.h to be generated at compile time
* Remove patch that prevents the Makefile from generating the
art_config.h file
* Remove pre-generated art_config.h for various architecture
* Add a do_compile prepend to remove the art_config.h that is provided
in the source so that the compilation will regenerate the file
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Tue, 28 Apr 2015 22:46:18 +0000 (00:46 +0200)]
e2fsprogs: install populate-extfs.sh
* install populate-extfs.sh from contrib, be aware that in order
to use it you need to set DEBUGFS shell variable, otherwise it will
try to use debugfs from relative path which is almost always
incorrect:
CONTRIB_DIR=$(dirname $(readlink -f $0))
DEBUGFS="$CONTRIB_DIR/../debugfs/debugfs"
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 1 May 2015 01:34:19 +0000 (21:34 -0400)]
perf: fix build (and feature tests) for 4.1-rcX
The way that perf detects features has changed/moved via commit e6c76d620
[perf build: Move feature checks code under tools/build].
This code movement resulted in the definition of CC being dropped, and
in turn the passing of --sysroot not part of the build.
This results in feature tests failing with errors such as:
In file included from test-pthread-attr-setaffinity-np.c:1:0:
sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.9.2/include/stdint.h:9:26:
fatal error: stdint.h: No such file or directory
# include_next <stdint.h>
^
compilation terminated.
While the fix is going upstream, we can modify the perf recipe to add
the definition of CC into the Makefile, and we'll continue to work on
patched and unpatched kernels.
Upstream-status: Pending
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 1 May 2015 01:34:16 +0000 (21:34 -0400)]
linux-yocto/3.14: refresh -rt support
Paul Gortmaker refreshed the 3.14-rt support to the latest rt stable
content.
With these SRCREV bumps, the 3.14 LTSI kernel is now at -rt37.
91dc6afcecd4 rt: bump localversion from 32 to 37 e69f7430b620 rt: bump localversion to 32 c060800318e4 netpoll: guard the access to dev->npinfo with rcu_read_lock/unlock_bh() for CONFIG_PREEMPT_RT_FULL=y 833c21beba79 Revert "timers: do not raise softirq unconditionally" 6c9337ff352c fs,btrfs: fix rt deadlock on extent_buffer->lock 2d542663bfb9 staging: Mark rtl8821ae as broken 988e4701df83 timers: Reduce future __run_timers() latency for first add to empty list 2549262883c5 timers: Reduce future __run_timers() latency for newly emptied list 073fac19d3e4 timers: Reduce __run_timers() latency for empty list 25ca11173e64 timers: Track total number of timers in list 277a4ae36580 fs/aio: simple simple work 7b2ebc4e590b lockdep: selftest: fix warnings due to missing PREEMPT_RT conditionals 9afc01954298 thermal: Defer thermal wakups to threads 84d35d05b236 locking: ww_mutex: fix ww_mutex vs self-deadlock f0c8e4837a51 Revert "rwsem-rt: Do not allow readers to nest" df0d51ecf13f sunrpc: make svc_xprt_do_enqueue() use get_cpu_light() f069e339ca02 work-simple: Simple work queue implemenation 0d9e6cbead39 scheduling while atomic in cgroup code 8405cdab8c2c sas-ata/isci: dont't disable interrupts in qc_issue handler dfb7e1ab2427 mips: rt: Replace pagefault_* to raw version ddbe4584a13b ARM: cmpxchg: define __HAVE_ARCH_CMPXCHG for armv6 and later 607f2a27c2ee arm/futex: disable preemption during futex_atomic_cmpxchg_inatomic() 58de8f60159f ARM: enable irq in translation/section permission fault handlers 62d90b45607c x86: UV: raw_spinlock conversion e8d164191f65 rtmutex: enable deadlock detection in ww_mutex_lock functions 9612daf936db rt,locking: fix __ww_mutex_lock_interruptible() lockdep annotation 47915a120d41 rtmutex.c: Fix incorrect waiter check a6a68d53df5f locking/rt-mutex: avoid a NULL pointer dereference on deadlock fb2c256f8a91 futex: Simplify futex_lock_pi_atomic() and make it more robust 7e59d4d5900e futex: Split out the first waiter attachment from lookup_pi_state() 45ccc2e3f25f futex: Split out the waiter check from lookup_pi_state() c5133997a345 futex: Use futex_top_waiter() in lookup_pi_state() 4726c8b47964 futex: Make unlock_pi more robust b55c2c7782ee rtmutex: Avoid pointless requeueing in the deadlock detection chain walk ff7cfbb757d4 rtmutex: Cleanup deadlock detector debug logic e80ba665fa71 rtmutex: Confine deadlock logic to futex 7a9e7c37ccf4 rtmutex: Simplify remove_waiter() d664c14c1db3 rtmutex: Document pi chain walk 64bcb809c720 rtmutex: Clarify the boost/deboost part 02323ee362c4 rtmutex: No need to keep task ref for lock owner check 063983fb0497 rtmutex: Simplify and document try_to_take_rtmutex() f87319b715f1 rtmutex: Simplify rtmutex_slowtrylock() de9723ae23f9 gpio: omap: use raw locks for locking 705ad635f56a rt: bump localversion from 22 to 31 22b5a5cda73a mm/page_alloc: fixup warning from stable merges to -rt
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wenlin Kang [Thu, 30 Apr 2015 10:17:39 +0000 (18:17 +0800)]
openssh: fix login fails for ssh -o Batchmode=yes with empty passwords
The patch fixes the login fails for ssh -o Batchmode=yes when passwords is
empty and without authorized_keys file even if set "PermitEmptyPasswords yes"
in sshd_config file.
Here, to fix this issue, we remove the file auth2-none.c-avoid-authenticate-
empty-passwords-to-m.patch, that fixed broken pipe while sshd with pam,
but it isn't needed any more now, because we make it has gone by change
ChallengeResponseAuthentication value in sshd_config file.
Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Li Zhou [Thu, 30 Apr 2015 09:34:23 +0000 (17:34 +0800)]
boost/libxslt: Enable nativesdk to unbreak <bitbake universe>
When run <make universe.fetchall>, the make will be broken because
nativesdk-boost and nativesdk-libxslt don't exist.
nativesdk-boost is depended by nativesdk-curlpp.
nativesdk-libxslt is depended by nativesdk-python-lxml.
In condition that meta-openembedded is compiled in.
Add nativesdk building for boost and libxslt.
Signed-off-by: Li Zhou <li.zhou@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adrian Freihofer [Mon, 27 Apr 2015 13:00:23 +0000 (15:00 +0200)]
wic: Add plugin for single partition disk
The wic plugin creates a disk image containig one ext2/3/4 partition.
No additional boot partition is required. Syslinux is installed into
the image. The target device is a legacy BIOS PC.
Purpose of this plugin:
Other avaliable plugins create a fat partition for /boot and an ext
partition for rootfs. Current linux-yocto kernel packages are not
compatible with this disk layout. The boot partition is not mounted
by default, hence the kernel is installed into rootfs and not into
boot partition. A kernel update ends up in a bricked device. The old
kernel which is still in boot likely does not even boot with updated
kernel modules from /. Even if the boot partition is mounted during
the kernel update the update will fail. The kernel package installs
a symbolic link which is not supported by the fat partition.
Creating just one ext partition for boot and rootfs solves all issues
related to package based kernel updates on the device.
The plugin depends on syslinux-nomtools a user space installer for
syslinux on ext filesystems.
Thanks to Robert Yang who implemented syslinux-nomtools and supported
the implementation of this plugin.
Signed-off-by: Adrian Freihofer <adrian.freihofer@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Thu, 30 Apr 2015 10:33:40 +0000 (13:33 +0300)]
wic tests: Move wic tests to oe-selftest infra
Modified existing wic test modules to work with oe-selftest
infrastructure.
$ oe-selftest --run-tests wic
...
test01_help (oeqa.selftest.wic.Wic)
Test wic --help ... ok
test02_createhelp (oeqa.selftest.wic.Wic)
Test wic create --help ... ok
test03_listhelp (oeqa.selftest.wic.Wic)
Test wic list --help ... ok
test04_build_image_name (oeqa.selftest.wic.Wic)
Test wic create directdisk --image-name core-image-minimal ... ok
test05_build_artifacts (oeqa.selftest.wic.Wic)
Test wic create directdisk providing all artifacts. ... ok
----------------------------------------------------------------------
Ran 5 tests in 6.434s
OK
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Thu, 23 Apr 2015 20:49:07 +0000 (23:49 +0300)]
wic tests: Add docstrings to test methods
Docstrings make nosetests output more clear:
Test wic create --help ... ok
Test wic --help ... ok
Test wic list --help ... ok
Test wic create directdisk providing all artifacts. ... ok
Test wic create directdisk --image-name core-image-minimal ... ok
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Cross-compiling qt4-embedded and qt4-x11-free applications for AArch64 ilp32
(both big and little endian) fails with below error,
(snip)
In file included from ../3rdparty/javascriptcore/JavaScriptCore/runtime/Collector.h:31:0,
from ../3rdparty/javascriptcore/JavaScriptCore/runtime/JSGlobalData.h:32,
from ../3rdparty/javascriptcore/JavaScriptCore/interpreter/CallFrame.h:26,
from ../3rdparty/javascriptcore/JavaScriptCore/runtime/ClassInfo.h:26,
from ../3rdparty/javascriptcore/JavaScriptCore/runtime/JSObject.h:27,
from ../3rdparty/javascriptcore/JavaScriptCore/API/JSCallbackConstructor.h:30,
from ../3rdparty/javascriptcore/JavaScriptCore/API/JSCallbackConstructor.cpp:27:
../3rdparty/javascriptcore/JavaScriptCore/wtf/StdLibExtras.h: In instantiation of 'TO QTWTF::bitwise_cast(FROM) [with TO = int; FROM = double]':
../3rdparty/javascriptcore/JavaScriptCore/runtime/JSImmediate.h:52:49: required from here
../3rdparty/javascriptcore/JavaScriptCore/wtf/StdLibExtras.h:63:1: error: size of array is negative
../3rdparty/javascriptcore/JavaScriptCore/wtf/StdLibExtras.h: In instantiation of 'TO QTWTF::bitwise_cast(FROM) [with TO = double; FROM = int]':
../3rdparty/javascriptcore/JavaScriptCore/runtime/JSImmediate.h:57:47: required from here
../3rdparty/javascriptcore/JavaScriptCore/wtf/StdLibExtras.h:63:1: error: size of array is negative
make[1]: *** [obj/release/JSCallbackConstructor.o] Error 1
-- CUT --
the error is because of JSVALUE64 is being defined while compiling
programs for AArch64 ilp32. This makes equal condition checking of
intptr_t and double datatypes as false, and results in -1 (negative)
as array size in bitwise_cast function.
The patch defines JSVALUE64, if the programs are being compiled for
AArch64 64bit NOT for ilp32.
2. qt4_arch.inc is modified to set system architecture as aarch64 if the
TARGET_ARCH is other than aarch64. Without this modification, for
TARGET_ARCH equal to aarch64_32, aarch64be, aarch64be_32; the system
architecture is set as 'generic' and results in below error.
configure log:
(snip)
64-bit AMD 80x86 (x86_64)
'-opensource' is unsupported, using 'generic'
'x86_64' is supported
System architecture: 'generic'
Host architecture: 'x86_64'
-- CUT --
build error:
(snip)
In file included from ../../include/QtCore/qatomic_generic.h:1:0,
from ../../include/QtCore/../../src/corelib/arch/qatomic_arch.h:64,
from ../../include/QtCore/qatomic_arch.h:1,
from ../../include/QtCore/../../src/corelib/thread/qbasicatomic.h:227,
from ../../include/QtCore/qbasicatomic.h:1,
from ../../include/QtCore/../../src/corelib/thread/qatomic.h:46,
from ../../include/QtCore/qatomic.h:1,
from ../../include/QtCore/../../src/corelib/tools/qbytearray.h:45,
from ../../include/QtCore/qbytearray.h:1,
from ../../include/QtCore/../../src/corelib/tools/qstring.h:46,
from ../../include/QtCore/qstring.h:1,
from ../../include/QtCore/../../src/corelib/kernel/qobject.h:48,
from ../../include/QtCore/qobject.h:1,
from ../../include/QtCore/../../src/corelib/kernel/qcoreapplication.h:45,
from ../../include/QtCore/qcoreapplication.h:1,
from qdbusintegrator.cpp:42:
../../include/QtCore/../../src/corelib/arch/qatomic_generic.h: In instantiation of 'bool QBasicAtomicPointer<T>::testAndSetOrdered(T*, T*) [with T = const QString]':
qdbusintegrator.cpp:76:1: required from here
../../include/QtCore/../../src/corelib/arch/qatomic_generic.h:197:88: error: invalid conversion from 'const void*' to 'void*' [-fpermissive]
../../include/QtCore/../../src/corelib/arch/qatomic_generic.h:108:20: error: initializing argument 2 of 'bool QBasicAtomicPointer_testAndSetOrdered(void* volatile*, void*, void*)' [-fpermissive]
../../include/QtCore/../../src/corelib/arch/qatomic_generic.h:197:88: error: invalid conversion from 'const void*' to 'void*' [-fpermissive]
../../include/QtCore/../../src/corelib/arch/qatomic_generic.h:108:20: error: initializing argument 3 of 'bool QBasicAtomicPointer_testAndSetOrdered(void* volatile*, void*, void*)' [-fpermissive]
make[1]: *** [.obj/release-shared-emb-auto/qdbusintegrator.o] Error 1
make[1]: *** Waiting for unfinished jobs....
-- CUT --
So, select system architecture (via QT_ARCH) as aarch64 for
AArch64 and its other variants
Signed-off-by: Krishnanjanappa, Jagadeesh <jagadeesh.krishnanjanappa@caviumnetworks.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mike Crowe [Thu, 30 Apr 2015 15:51:13 +0000 (16:51 +0100)]
libcap: Avoid passing "-e" to make
oe-core 51540b64f62234c145fc32cfa3fbbaaebbeece08 altered libcap.inc (at the
time) to append to EXTRA_OEMAKE rather than assign to it. The default value
for EXTRA_OEMAKE contains "-e". This means that the change caused "-e" to
be passed to make for the first time.
Unfortunately passing "-e" subtly changes the behaviour of libcap's
Make.Rules under recursive make when prefix="" (which it is for us since
we're using meta-micro.)
Without "-e" the prefix comes from the command line in both the parent and
submakes. This takes precedence over any attempt to reassign it with a
simple "=" operation so the headers are correctly installed in (empty
string)/include.
With "-e" the prefix still comes from the command line in the parent make
but from the environment in the submake. The attempt to assign it fails in
the parent make as before, but not in the submake so the headers are
installed incorrectly in /usr/include.
In all four cases the "ifdef prefix" else clause is executed.
So, let's assign EXTRA_OEMAKE in order to avoid using "-e" at all.
Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Tue, 28 Apr 2015 16:49:55 +0000 (17:49 +0100)]
oe-selftest: devtool: add some tests for devtool add -f
Tests the following aspects of "devtool add" with the -f option:
* Works for a git and https URI
* Extracts to the appropriate directory
* Uses the correct recipe file name with and without -V
* Sets SRC_URI and S appropriately with and without -V
* Sets SRCREV if rev= is specified in the URI
A lot of this functionality relies on "recipetool create" which
"devtool add" wraps around, so the associated behaviour of that is also
being tested here.
Refactor out the code to check a recipe for variable values / inherits
at the same time so we can use it to check the generated recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Paul Eggleton [Tue, 28 Apr 2015 16:10:11 +0000 (17:10 +0100)]
recipetool: allow specifying SRCREV via rev= in URI
Provide a means to set SRCREV immediately by using rev= in the URI; if
it is specified then it is removed before setting SRC_URI and SRCREV is
set to the same value instead.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Paul Eggleton [Tue, 28 Apr 2015 16:07:31 +0000 (17:07 +0100)]
devtool: add: use the appropriate file naming and versioning for SCM recipes
* Recipes that fetch from git, svn or hg by OpenEmbedded convention
should normally be named with this as a suffix, since PV is meant to
be set appropriately within the recipe, so follow this. In order to
make this work we need to be able to have the version independent from
the file name, so add a -V option to recipetool create to allow this
to be specified.
* If -V is specified on the devtool add command line, ensure at PV gets
set to include this version.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Paul Eggleton [Tue, 28 Apr 2015 10:21:55 +0000 (11:21 +0100)]
devtool: add: add an option to fetch remote source
Add a -f/--fetch option to fetch a remote URI (into the already
specified source tree path) and set this as SRC_URI within the recipe.
This simply wraps around the existing functionality in recipetool.
Implements [YOCTO #7644].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Paul Eggleton [Tue, 28 Apr 2015 11:25:30 +0000 (12:25 +0100)]
recipetool: ensure git clone is standalone when extracting
If -x is specified and the specified URI was a git repository, we need
to ensure that the resulting clone is a sandalone and not one that has
pointers into the temporary fetch location or DL_DIR (since the git
fetcher does a local clone with -s). Split out the code from devtool
that already does this for "devtool modify -x" and reuse that.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Paul Eggleton [Tue, 28 Apr 2015 11:22:36 +0000 (12:22 +0100)]
recipetool: avoid second-level subdir when extracting
When -x was specified, we were getting the normal unpack subdirectory
which we don't really want - if there's only one subdirectory unpacked
then we should effectively copy just it to the extraction path, not as a
subdirectory under it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Richard Purdie [Wed, 29 Apr 2015 13:23:14 +0000 (14:23 +0100)]
package: Fix license exclusion packaging errors
Currently the license exclusion code removes packages from PACKAGES
pre population of the package directories. This means that the FILES
entries for some packages are not seen and invariably results in
packaging errors.
Instead, remove the packages from PACKAGES post population of the packages
so the usual FILES entries work as expected but the file are not placed
into any packages and no packages containing embargoed licenses are generated.
This avoids errors from gcc-runtime with GPLv3 exclusion like:
ERROR: QA Issue: gcc-runtime: Files/directories were installed but not shipped in any package:
/usr/share
/usr/src
/usr/share/gcc-4.9.2
/usr/share/gcc-4.9.2/python
Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install. [installed-vs-shipped]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Roy Li [Tue, 28 Apr 2015 00:24:59 +0000 (08:24 +0800)]
subversion: remove 1.6.X recipes
Removing the 1.6.X recipes, since there is a new version 1.8.X recipes,
and hope that all projects already upgraded their premirror caches to
use new format
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Roy Li [Tue, 28 Apr 2015 06:22:54 +0000 (14:22 +0800)]
elfutils: Security Advisory - CVE-2015-0255
Directory traversal vulnerability in the read_long_names function in
libelf/elf_begin.c in elfutils 0.152 and 0.161 allows remote attackers
to write to arbitrary files to the root directory via a / (slash) in a
crafted archive, as demonstrated using the ar program.
linux-firmware: add NO_GENERIC_LICENSE for all licenses
An alternative approach with NO_GENERIC_LICENSE has been added
in license.bbclass to allow copying non-generic license,
add it for all firmware licenses.
license.bbclass: allow copying license not in common licenses
Some package like linux-firmware has many licenses that aren't in any
way common, and new ones will be added from time to time, in order to
avoid adding bunch of such common license files that are only applicable
to a specific package, NO_GENERIC_LICENSE is added to allow copying license
not in common licenses, it should be used in the recipe as:
NO_GENERIC_LICENSE[<license_name>] = "<license file in fetched source>"
e.g.
NO_GENERIC_LICENSE[Firmware-Abilis] = "LICENCE.Abilis.txt"
The COPYING's md5sum is changed by this commit:
commit 945f9c69af665044448b0eb6816656acc84fca77
Author: Ken Dreyer <kdreyer@redhat.com>
Date: Mon Jan 26 14:02:46 2015 -0700
update GPLv2 text in COPYING
The FSF has issued a couple of tiny updates to the GPLv2. The main
change is a new mailing address for the FSF headquarters.
This license text was taken verbatim from
https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt
The main content are the same.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Multiple format string vulnerabilities in the parse_error_msg
function in parsehelp.c in dpkg before 1.17.22 allow remote attackers
to cause a denial of service (crash) and possibly execute arbitrary
code via format string specifiers in the (1) package or (2)
architecture name.
The dpkg-source command in Debian dpkg before 1.16.16 and 1.17.x before
1.17.25 allows remote attackers to bypass signature verification
via a crafted Debian source control file (.dsc).
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Shan Hai [Wed, 29 Apr 2015 08:53:09 +0000 (16:53 +0800)]
grub2: fix initrd size restriction bug
The current grub2 fails on loading large initrd file (> 500M) since
the initrd size is added to the addr_min and causes the failure.
Fix it by picking a patch from grub2 upstream.
Signed-off-by: Shan Hai <shan.hai@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
