Kai Kang [Wed, 29 Oct 2014 11:16:07 +0000 (19:16 +0800)]
beecrypt: add option --with-dev-dsp
Add this configure option for developer to control if the
/dev/dsp should be used on target. Instead of judging it
based on the very device file of build server.
Signed-off-by: Zhang Xiao <xiao.zhang@windriver.com> Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Martin Hundebøll [Thu, 30 Oct 2014 10:43:24 +0000 (11:43 +0100)]
scripts: use '/usr/bin/env' in shebangs with python
To support yocto on systems with python3 as default version, scripts
should use /usr/bin/env python in the shebang, as this allows the use of
a fake env to mimic python2 as default version.
This patch simply replaces occurrences of #!/usr/bin/python with
#!/usr/bin/env python and was done with this oneliner:
Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 4 Nov 2014 11:39:07 +0000 (11:39 +0000)]
oprofile: 0.9.9 -> 1.0.0
opcontrol is now dropped and replaced with the operf interface. As such, we drop
the opstart/opstop commands and any patches related to the old removed interfaces.
Some patches were also mered upstream so those are also dropped.
There is also a problem found on mips with the security flags enabled, the
patch has more specific details.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Gary Thomas [Wed, 5 Nov 2014 14:57:38 +0000 (07:57 -0700)]
python-pygtk: Clean up incorrect "fix"
This patch removes most of "dirty fix #1" which is no longer needed
(no dependency on python-pygobject-dev exists). A side effect is
that the pygtk code generator will also be installed.
Merge 'fix-path.inc' into this recipe as it is not used by any other
recipe.
Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Armin Kuster [Wed, 1 Oct 2014 14:23:38 +0000 (07:23 -0700)]
lz4: update to version r123
Makefile md5sum changed since version is hardcode in it.
Added : experimental lz4frame API; special thanks to Takayuki Matsuoka and
Christopher Jackson for testings and suggestions
Fix : s390x support, thanks to Nobuhiro Iwamatsu
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Previously there was a change to the ncurses compile to make it more
like the typical way it was compiled on a host system. This fixed a
whole class of host machines, but masked the real underlying problem
with the display corruption issues and menuconfig.
The corner case that led to the discovery that the wrong curses.h file
was getting used was when there was no curses libraries at all on one
of the development hosts. What had happened before was that
/usr/include/curses.h on the host system had to match closely enough
to the curses.h in the sysroot and then linking against the sysroot
version of curses.so was ok (meaning no display corruption). But on
some systems with ncurses.h vs curses.h such as SuSE hosts, there were
still issues.
If we fix the root of the problem and force the mconf and lxdialog to
use the correct headers and libraries from the sysroot there is no
further issues and the menuconfig target works properly. It also
means we can back out the custom compilation flags to the ncurses
recipe because they are no longer needed.
For the kernel part of the menuconfig / nconfig changes it will be
merged separately and this is all based on:
https://lkml.org/lkml/2013/3/3/103
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Chen Qi [Fri, 7 Nov 2014 08:47:19 +0000 (16:47 +0800)]
nfs-utils: change owner/group of directories in do_install
Previously, the owners/groups of directories like /var/lib/nfs/statd
are changed in the init script, /etc/init.d/nfscommon. This is actually
a workaround. We need to change them at do_install time.
This patch fixes the above problem by changing owners/groups at do_install
time.
Besides, configuration option '--with-staduser=nobody' is changed to be
'--with-statduser=rpcuser'. And /var/lib/nfs/statd/state is modified to have
permission 0644, just like other distros (ubuntu, fedora, etc.) do.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jackie Huang [Thu, 6 Nov 2014 05:33:38 +0000 (00:33 -0500)]
perl: set the perl libraries search path
The default value for this is ../../lib which ends up with
something like:
| ./sysroots/x86_64-linux/usr/bin/perl-native/perl5.20.0.real \
| "-I../../lib" "-I../../lib" "-MExtUtils::Command::MM" -e pod2man \
| "--" --section=0 --perm_rw=644 perldoc.pod blib/man1/perldoc.1
in this case, nativeperl will find libraries from the target build,
When using an x86-64 host to target Haswell, you can end up with
../../lib including precompiled modules which use Haswell
instructions, it fails with:
| Running pm_to_blib for dist/if directly
| Skip ../../lib/if.pm (unchanged)
| Makefile:457: recipe for target 'manifypods' failed
| make[1]: *** [manifypods] Illegal instruction
So set it to use the -native ones instead of those from the target
build.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
apt-file calls run-parts with options --list and --regex:
root@neopili:~/curro/qtec/qt5022/build-qt5022-cesium/build/tmp/work/bobcat_64-poky-linux/apt/0.9.9.4-r0/apt-0.9.9.4# grep run-parts cmdline/apt-key -rn
187: for trusted in $(run-parts --list $TRUSTEDPARTS --regex '^.*\.gpg$'); do
busybox implementation of run-parts does not support --regex. And --list option is not enabled on yocto busybox configuration.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Tue, 4 Nov 2014 11:39:08 +0000 (11:39 +0000)]
gdb: 7.7.1 -> 7.8.1
Drop patch merged upstream.
Also drop old arm/thumb patch which breaks the compile on arm. We've
had this since 2010 (or longer) and the issue has likely been fixed
upstream by now. If not someone with more knowledge will need to
figure out the fix against the current codebase.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 5 Nov 2014 18:43:03 +0000 (18:43 +0000)]
base: Make PRINC warning an error
Apparently 1.5 years of warnings isn't enough to get anyone to take any
notice. We therefore make this an error so people can ignore it for
another 6 months whereafter we can finally give up and remove the
obsolete code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 5 Nov 2014 18:49:03 +0000 (18:49 +0000)]
perl: Enable rebuilds to account for configuration changes
If configure/compile was rerun for perl, changes such as libdir changes
were not being picked up. To fix this we we add "make clean"
functionality, if the makefile is present.
We also in this case need to delete the .so file, else some perl modules
try and load the target arch libraries leading to build failures. I'd
love it if there were a better way to do this and am open to better
proposals but this was the best I could find, not being a perl expert.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out we have quite a number of Makefiles out there without a
clean target. Rather than have all cases code an empty do_configure, add
a CLEANBROKEN variable which when set to "1" will disable the attempt to
"make clean".
This patch also adjusts various recipes which either have this problem
fixed, or have been reported to have make clean failures.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bump SRCREV to 20140828 tag
drop automake-foreign patch - fixed upstream (commit 18594de and edbae29)
add add-know-for-tirpc patch - workaround ftbfs with libtirpc found
update realtime tests fixes upstream status from submitted to backported -
merged upstream
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Peter A. Bigot [Sun, 2 Nov 2014 10:48:37 +0000 (04:48 -0600)]
image_types.bbclass: whitespace and reorder
Use a multi-line value to set IMAGE_TYPES and put all the compressed
versions of a format on one line. Other than moving ext2.lzma this is
just whitespace.
Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Chong Lu [Fri, 31 Oct 2014 03:22:10 +0000 (11:22 +0800)]
gst-plugin-bluetooth: remove systemd service file
The service file should be included in bluez4 package, not in plugin package.
This solves the following warning:
WARNING: QA Issue: gst-plugin-bluetooth: Files/directories were installed but not shipped
/lib
/lib/systemd
/lib/systemd/system
/lib/systemd/system/bluetooth.service [installed-vs-shipped]
Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jackie Huang [Fri, 31 Oct 2014 14:41:49 +0000 (10:41 -0400)]
gcc: backport two patches to fix ICE in dwarf2out_var_location
The first patch fixes the ICE in dwarf2out_var_location, at
dwarf2out.c.
r212171:
* except.c (emit_note_eh_region_end): New helper function.
(convert_to_eh_region_ranges): Use emit_note_eh_region_end to
emit EH_REGION_END note.
* jump.c (cleanup_barriers): Do not split a call and its
corresponding CALL_ARG_LOCATION note.
But it introduced a regression issue:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=63348
so backport the fix for the regression as well:
r215613:
PR rtl-optimization/63348
* emit-rtl.c (try_split): Do not emit extra barrier.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Cristian Iorga [Fri, 31 Oct 2014 17:44:26 +0000 (19:44 +0200)]
connman: upgrade to 1.26
- WiFi P2P support in ConnMan has been significantly improved;
- Applications can now register WiFi Display, UPnP or Bonjour P2P services;
- Various bug fixes.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Wed, 5 Nov 2014 20:34:40 +0000 (20:34 +0000)]
buildtools-tarball: package all of Python
Instead of cherry-picking pieces of Python to put into the buildtools tarball,
ship all of it. We can't predict what bits of Python will be needed in the
future.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chong Lu [Tue, 4 Nov 2014 01:35:18 +0000 (09:35 +0800)]
curl: Security Advisory - curl - CVE-2014-3620
libcurl wrongly allows cookies to be set for Top Level Domains (TLDs), thus
making them apply broader than cookies are allowed. This can allow arbitrary
sites to set cookies that then would get sent to a different and unrelated site
or domain.
Hongxu Jia [Wed, 29 Oct 2014 05:54:51 +0000 (13:54 +0800)]
rootfs.py: tweak inner warn message catching
The fix filters out irrelevant messages, and makes the catching more
accurate, the inner warn message in do_rootfs usually comes from the
output of complementary install, and pattern the format to catch it.
Here is the example of irrelevant messages:
...
|WARNING: log_check: There is a warn message in the logfile
|WARNING: log_check: Matched keyword: [warn]
|WARNING: log_check: `tmp/deploy/rpm/core2_64/pam-plugin-warn
-1.1.6-r5.0.core2_64.rpm' -> `tmp/work/intel_x86_64-wrs-linux/
wrlinux-image-installer/1.0-r0/rootfs/Packages.intel/./core2_64/
pam-plugin-warn-1.1.6-r5.0.core2_64.rpm'
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Hongxu Jia [Wed, 29 Oct 2014 05:54:50 +0000 (13:54 +0800)]
python-smartpm: report warn rather than error during install with --attempt
With the following config and build image:
...
IMAGE_INSTALL_append = "shadow man-pages"
EXTRA_IMAGE_FEATURES += "doc-pkgs"
...
There is an error during install with --attempt, and it breaks the build.
...
|error: file /usr/share/man/man5/passwd.5 from install of
shadow-doc-4.2.1-r0.i586 conflicts with file from package
man-pages-3.71-r0.i586
...
For complementary and 'attemptonly' package processing, we should make sure
the warn rather than error messages reported.
[YOCTO #6769]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Hongxu Jia [Wed, 29 Oct 2014 05:54:49 +0000 (13:54 +0800)]
man-pages/shadow: resolve man pages confliction
Invoke smart/rpm to install man-pages and shadow-doc, there
is a build failure:
...
|error: file /usr/share/man/man5/passwd.5 from install of
shadow-doc-4.2.1-r0.0.core2_64 conflicts with file from
package man-pages-3.70-r0.0.core2_64
|error: file /usr/share/man/man3/getspnam.3 from install of
shadow-doc-4.2.1-r0.0.core2_64 conflicts with file from
package man-pages-3.70-r0.0.core2_64
...
Use alternatives mechanism to fix it.
As README in man-pages said: "Note that sometimes these
pages are duplicates of pages also distributed in other
packages. Be careful not to overwrite more up-to-date
versions. So we set man-pages with lower priority.
[YOCTO #6769]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
The subordinate IDs support in pkg-shadow allows unprivileged users to manage a
set of UIDs and GIDs. These subordinate IDs are specified by root, and can be
further used by the unprivileged user they have been assigned to. This user can
then create an e.g. user namespace, where he is allowed to manage his own set of
users and group from the pool of subordinate IDs. More details can be found at
http://lwn.net/Articles/533617/.
Pull a required change from upstream in order to make shadow cross-compile with
subordinate IDs support. Enable flag in recipe.
Changes since v1:
- update changelog
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Roy.Li [Wed, 29 Oct 2014 06:01:07 +0000 (14:01 +0800)]
iproute2: backport a patch to make adding vxlan link success
If without this patch:
$ ip link add vxlan0 type vxlan id 51 group 238.1.1.1 dev eth0
Error: argument "vxlan0" is wrong: Unknown device
$
With this patch;
$ ip link add vxlan0 type vxlan id 51 group 238.1.1.1 dev eth0
$ ifconfig -a |grep vxlan0
vxlan0 Link encap:Ethernet HWaddr da:61:56:2e:c2:20
$
Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Gary Thomas [Tue, 28 Oct 2014 15:05:47 +0000 (09:05 -0600)]
python-pygtk: Restore pkg-config file
Some previous version of this recipe was errantly removing the pygtk-2.0.pc
(pkg-config) file. This is needed for other packages to be able to build
against this library.
Also update the .pc file to match current pkg-config use (libdir was missing).
Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
SysLogHandler converts message to utf8 and adds BOM, supposedly
to conform with RFC5424, but the implementation is broken:
the RFC specifies that the BOM should prefix only unstructured
message part, but current Python implementation puts it in the
middle of structured part, thus confusing RFC-compliant receivers.
Signed-off-by: yzhu1 <yanjun.zhu@windriver.com> Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jackie Huang [Mon, 27 Oct 2014 07:37:41 +0000 (03:37 -0400)]
license.bbclass: canonicalise the licenses named with 'X+'
If INCOMPATIBLE_LICENSE=GPLv3, GPLv3+ should be excluded
as well but not now since there is no SPDXLICENSEMAP for
licenses named with 'X+', we can add all the SPDXLICENSEMAP
settings for licenses named with 'X+' in licenses.conf,
but it's more like a duplication, so improve the canonical_license
function to auto map for 'X+' if SPDXLICENSEMAP for 'X' is
available, so GPLv3+ becomes GPL-3.0+.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Chong Lu [Fri, 24 Oct 2014 08:26:41 +0000 (16:26 +0800)]
curl: Security Advisory - curl - CVE-2014-3613
By not detecting and rejecting domain names for partial literal IP addresses
properly when parsing received HTTP cookies, libcurl can be fooled to both
sending cookies to wrong sites and into allowing arbitrary sites to set cookies
for others.
Chong Lu [Mon, 27 Oct 2014 05:24:23 +0000 (13:24 +0800)]
kmod: fix debuginfo is missing in shared library
INHIBIT_PACKAGE_STRIP variable will make debuginfo lose in shared library.
The test cases of kmod contain kernel modules for many different architectures,
strip and arch gets confused and throws errors. Pack kernel modules in test
cases to avoid strip command failed.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Mon, 6 Oct 2014 22:09:15 +0000 (23:09 +0100)]
systemd: don't add files and dependencies from units Conflicts
Adding dependencies and moving files based on Conflicts tags in unit files isn't
right, mainly as it means that systemd depends on systemd-binfmt, because the
latter ends up containing the shutdown.target unit.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Barker [Sun, 26 Oct 2014 19:36:22 +0000 (19:36 +0000)]
package_manager: Fix BAD_RECOMMENDATIONS for opkg
In package_manager.py, when using opkg as the packager, the command 'opkg <args>
info <pkg>' is called to get information about each pkg in BAD_RECOMMENDATIONS
in a format that can be written to the status file. The 'Status: ...' line is
modified and all other lines are passed through. Changing the verbosity level
argument for this command will change what it written into the status file.
Crucially, with the default verbosity level, no blank lines are being printed by
the opkg command and so no blank lines are being written to the status file to
separate each package entry.
The package parsing code in opkg expects package entries in the status file to
be separated by at least one blank line. If no blank line is seen, the next
package entry is interpreted as a continuation of the last package entry, but
the new values overwrite the old values.
So with the default verbosity level, a blank line follows some package entries
and these are parsed. The others are dropped due to the lack of blank lines. As
the verbosity increases, more debugging messages add blank lines and more
packages are parsed.
The solution to ensure that this works correctly regardless of the verbosity
level is simply add a blank line after the output of 'opkg info' is written to
the status file, ensuring that the next package is separated from the current
package.
[YOCTO #6816]
Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Cc: Chris Carr <chris.carr@ge.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Johan Hovold [Fri, 24 Oct 2014 15:39:40 +0000 (17:39 +0200)]
udev: fix uevent-helper disable
Make sure that /proc/sys/kernel/hotplug exists before trying to disable
the uevent-helper mechanism.
Since kernel commit 86d56134f1b6 ("kobject: Make support for
uevent_helper optional.") the kernel can be built without uevent-helper
support. In this case /proc/sys/kernel/hotplug does not exist and the
current sysvinit script fails with
/etc/rcS.d/S04udev: line 132: can't create /proc/sys/kernel/hotplug: nonexistent directory
when trying to disable the uevent-helper mechanism during boot.
Note that a single NULL-character has always been sufficient to disable.
Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
BusyBox: Fixing broadcast address is not fed and rightly initialized
When using udhcpc along with ip command(/sbin/ip), broadcast address is not
assigned. Broadcast address is successfully assigned when using udhcpc without
ip command existence.
with ip command:
$ifconfig eth0|grep Bcast
inet addr:128.224.162.141 Bcast:0.0.0.0 Mask:255.255.254.0
$
without ip command:
$ifconfig eth0|grep Bcast
inet addr:128.224.162.141 Bcast:128.224.163.255 Mask:255.255.254.0
$
/etc/udhcp.d/50default[simple.script] is called to set ip address by dhcp
client, In case of ifconfig, it doesn't care of it's existence because it
will automatically calculate broadcast address then assign it if there is
no broadcast option. However in case of ip command, it requires broadcast
address statically.
Signed-off-by: Hu <yadi.hu@windriver.com> Signed-off-by: Roy Li <rongqing.li@windriver.com>
Shan Hai [Fri, 24 Oct 2014 06:05:36 +0000 (14:05 +0800)]
ldconfig-native: fix a endian-ness bug
Some header fields of ELF were read with wrong size on 64bit
big-endian machine, fix it by reading the fields with read64
instead of read32.
Signed-off-by: Par Olsson <Par.Olsson@windriver.com> Signed-off-by: Shan Hai <shan.hai@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
There is a failure to build lib32-meta-toolchain:
...
|ERROR: lib32-packagegroup-core-standalone-sdk-target not found in the base
feeds (qemux86_64 x86 noarch any all).
...
In package_manager.py, the variable 'DEFAULTTUNE_virtclass-multilib-lib32'
is used to process multilib image/toolchain. But for the build of lib32-
meta-toolchain, the value of 'DEFAULTTUNE_virtclass-multilib-lib32' is
deleted. In 'bitbake lib32-meta-toolchain -e', we got:
...
|# $DEFAULTTUNE_virtclass-multilib-lib32 [2 operations]
|# set? /home/jiahongxu/yocto/build-20141010-yocto/conf/local.conf:237
|# "x86"
|# del data_smart.py:406 [finalize]
|# ""
|# pre-expansion value:
|# "None"
...
The commit 899d45b90061eb3cf3e71029072eee42cd80930c in oe-core deleted
it at DataSmart.finalize
...
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Tue May 31 23:52:50 2011 +0100
bitbake/data_smart: Change overrides behaviour to remove
expanded variables from the datastore
...
We add an internal variable 'DEFAULTTUNE_ML_<multilib>', assign it with the
value of 'DEFAULTTUNE_virtclass-multilib-lib32' before deleting.
For rpm backend in package_manager.py, we use DEFAULTTUNE_virtclass-multilib
-lib32 first, if it is not available, and try to use DEFAULTTUNE_ML_<multilib>
[YOCTO #6842]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Hongxu Jia [Wed, 8 Oct 2014 12:16:36 +0000 (20:16 +0800)]
opkg: fix remove pkg with --force-removal-of-dependent-packages failed
opkg remove perl --force-removal-of-dependent-packages
...
Removing package perl-module-extutils-mm-dos from root...
...
Removing package perl-module-extutils-mm-dos from root...
You can force removal of packages with failed prerm scripts with the option:
--force-remove
No packages removed.
Collected errors:
* pkg_run_script: Internal error: perl-module-extutils-mm-dos has a
NULL tmp_unpack_dir.
* opkg_remove_pkg: not removing package "perl-module-extutils-mm-dos",
prerm script failed
...
While remove pkg with '--force-removal-of-dependent-packages',
pkg may be added to remove list multiple times, add status
check to make sure pkg only be removed once.
[YOCTO #6819]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Armin Kuster [Wed, 22 Oct 2014 20:29:14 +0000 (13:29 -0700)]
tzdata: update to 2014i
Changes affecting future time stamps
Pacific/Fiji will observe DST from 2014-11-02 02:00 to
2015-01-18 03:00. (Thanks to Ken Rylander for the heads-up.)
Guess that future years will use a similar pattern.
A new Zone Pacific/Bougainville, for the part of Papua New
Guinea that plans to switch from UTC+10 to UTC+11 on
2014-12-28 at 02:00. (Thanks to Kiley Walbom for the
heads-up.)
Changes affecting time zone abbreviations
Since Belarus is not changing its clocks even though Moscow
is, the time zone abbreviation in Europe/Minsk is changing
from FET to its more-traditional value MSK on 2014-10-26 at
01:00. (Thanks to Alexander Bokovoy for the heads-up about
Belarus.)
The new abbreviation IDT stands for the pre-1976 use of UT+8
in Indochina, to distinguish it better from ICT (UT+7).
Changes affecting past time stamps
Many time stamps have been corrected for Asia/Ho_Chi_Minh
before 1976 (thanks to Trần Ngọc Quân for an indirect pointer
to Trần Tiến Bình's authoritative book). Asia/Ho_Chi_Minh has
been added to zone1970.tab, to give tzselect users in Vietnam
two choices, since north and south Vietnam disagreed after our
1970 cutoff.
Asia/Phnom_Penh and Asia/Vientiane have been turned into
links, as they differed from existing zones only for older
time stamps. As usual, these changes affect pre-1970 time
stamps only. Their old contents have been moved to the
'backzone' file. `
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Armin Kuster [Wed, 22 Oct 2014 20:29:13 +0000 (13:29 -0700)]
tzcode: update to 2014i
Changes affecting code
The time-related library functions now set errno on failure,
and some crashes in the new tzalloc-related library functions
have been fixed. (Thanks to Christos Zoulas for reporting
most of these problems and for suggesting fixes.)
If USG_COMPAT is defined and the requested time stamp is
standard time, the tz library's localtime and mktime functions
now set the extern variable timezone to a value appropriate
for that time stamp; and similarly for ALTZONE, daylight
saving time, and the altzone variable. This change is a
companion to the tzname change in 2014h, and is designed to
make timezone and altzone more compatible with tzname.
The tz library's functions now set errno to EOVERFLOW if they
fail because the result cannot be represented. ctime and
ctime_r now return NULL and set errno when a time stamp is out
of range, rather than having undefined behavior.
Some bugs associated with the new 2014g functions have been
fixed. This includes a bug that largely incapacitated the new
functions time2posix_z and posix2time_z. (Thanks to Christos
Zoulas.) It also includes some uses of uninitialized
variables after tzalloc. The new code uses the standard type
'ssize_t', which the Makefile now gives porting advice about.
Changes affecting commentary
Updated URLs for NRC Canada (thanks to Matt Johnson and Brian
Inglis).
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Yuanjie Huang [Wed, 22 Oct 2014 08:47:57 +0000 (04:47 -0400)]
mtd-utils: Fix alignment trap triggered by NEON instructions
NEON instruction VLD1.64 was used to copy 64 bits data after type
casting, and they will trigger alignment trap.
This patch uses memcpy to avoid alignment problem.
Roy Li [Wed, 22 Oct 2014 08:35:43 +0000 (16:35 +0800)]
python3: do not replace ccache in the middle of a path
Python recipe did a sed s/ccache/$(CCACHE) on the Makefile, which
replaces all "ccache" including ones that consist of a full path.
This leads to build error when building in a project path with
"ccache" in its name. Fix it by only replacing "ccache " with
"$(CCACHE) ".
Same fix on python 2.xx is: 1181112cf65bc[python: do not replace ccache in the ]
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Apache Subversion 1.0.0 through 1.7.x before 1.7.17 and 1.8.x before
1.8.10 uses an MD5 hash of the URL and authentication realm to store
cached credentials, which makes it easier for remote servers to obtain
the credentials via a crafted authentication realm.
The Serf RA layer in Apache Subversion 1.4.0 through 1.7.x before 1.7.18
and 1.8.x before 1.8.10 does not properly handle wildcards in the Common
Name (CN) or subjectAltName field of the X.509 certificate, which allows
man-in-the-middle attackers to spoof servers via a crafted
certificate.<a href=http://cwe.mitre.org/data/definitions/297.html
target=_blank>CWE-297: Improper Validation of Certificate with Host
Mismatch</a>
