Paul Eggleton [Thu, 6 Apr 2017 22:01:44 +0000 (10:01 +1200)]
lib/oe/sstatesig: avoid reporting duplicate siginfo files from sstate
In find_siginfo(), which is used by bitbake-diffsigs among other things,
avoid adding a siginfo file from the sstate-cache where we've already
collected a sigdata file from the stamps directory with the same hash.
This avoids the possibility that the top two files (as picked by default
using the bitbake-diffsigs -t option) are for the same signature and
thus the tool would report no differences. In order to do that, just use
the hashfiles dict that we already have - we just need to change the
code to populate that even if we're collecting matching files without
looking for a fixed set of hashes (i.e. taskhashlist isn't set).
This replaces previous code in bitbake-diffsigs that attempted to filter
these out with limited success.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 6 Apr 2017 22:01:43 +0000 (10:01 +1200)]
lib/oe/sstatesig: fix finding native siginfo files in sstate-cache
When comparing signatures with bitbake-diffsigs -t or bitbake -S
printdiff, we use this find_siginfo() function implemented in this
module to find the siginfo/sigdata files corresponding to the tasks
we're looking for. However, native sstate files go into a
NATIVELSBSTRING subdirectory and there was no handling for this when
asking about native recipes.
I'm not even sure why we were walking SSTATE_DIR in order to find
this - we don't need to, we just need to run glob.glob() on the filespec
we calculate, which should be a little bit more efficient.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Kelly [Thu, 6 Apr 2017 19:48:39 +0000 (12:48 -0700)]
qemu: use python2.7 instead of python2
meta/conf/bitbake.conf puts python2.7 into the HOSTTOOLS variable but not
python2, so only python2.7 is guaranteed. In addition, on some distros -- such
as Amazon Linux -- /usr/bin/python2 doesn't exist but python2.7 does. So, use
python2.7 for the --python= argument in the qemu configure step.
Signed-off-by: Martin Kelly <mkelly@xevo.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Thu, 6 Apr 2017 14:48:17 +0000 (17:48 +0300)]
qemux86*.conf: changed dependency task for syslinux
Changed dependency task for syslinux from do_build to
do_populate_sysroot as do_build dependency caused conflicts in
populating image recipe sysroot using conflicting recipes. This
makes do_image_wic task to fail with FileExistsError trying to
copy the same file from two conflicting recipes.
This should also speed up image creation a bit as do_populate_sysroot
task is faster than do_build.
[YOCTO #11295]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc-6.3: backport fix of check for empty string in ubsan.c
Building gcc-cross-initial with GCC7 on the host fails due to the
comparison of a pointer to an integer in ubsan_use_new_style_p, which
is forbidden by ISO C++:
ubsan.c:1474:23: error: ISO C++ forbids comparison between pointer and
integer [-fpermissive]
|| xloc.file == '\0' || xloc.file[0] == '\xff'
Backport the fix from upstream GCC to enable the build with GCC 7
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 5 Apr 2017 14:37:12 +0000 (15:37 +0100)]
sstate: Skip glibc do_stash_locale and gcc do_gcc_stash_builddir tasks
We never need these tasks as dependencies of other sstate tasks since
they're only ever needed to build artefacts so we can always skip them
and save some time/space.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two identical builds can end up having deploy/licenses folders
that differ. This is observed in cases where there are several
different license files of the same name in different folders,
i.e. "COPYING". In those case we have to differentiate the files
somehow and we do it via file expensions such as COPYING.0, COPYING.1.
However, which file will get which extension is presently random.
This means, for example, that COPYING.0 in one build is the same
as COPYING.1 in the other (and vice versa).
Although there is mothing wrong with this, for the sake of binary
reproducibility it is preferable to have a deterministic outcome.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
selftest/wic: skip wic unit tests in case NLS is disable
WIC test case requires wic-tools which in turn depends on intltool-native and
gettext-native. However, if NLS is disable, the gettext-minimal-native is used instead
of gettext-native causing a failure on intltool-native as seen below:
checking for msgfmt... no
checking for gmsgfmt... no
configure: error: GNU gettext tools not found; required for intltool
ERROR: Function failed: do_configure (log file is located at /home/lsandov1/poky/build/tmp/work/i586-poky-linux-musl/systemd-boot/232-r0/temp/log.do_configure.7518)
ERROR: Task (/home/lsandov1/poky/meta/recipes-bsp/systemd-boot/systemd-boot_232.bb:do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 609 tasks of which 604 didn't need to be rerun and 1 failed.
[YOCTO #10902]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python3: fix run-time deps for core python3 libraries
The http.server module from python3-netclient imports the html module
which is in python3-html. Also xmlrpc.server imports pydoc which is a
part of python3-pydoc. But those run-time dependencies are missing
from python3-netclient and python3-xmlrpc respectively.
Add the missing run-time dependencies.
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Thu, 6 Apr 2017 10:05:51 +0000 (03:05 -0700)]
mc: replace "perl -w" with "use warnings"
The shebang's max length is usually 128 as defined in
/usr/include/linux/binfmts.h:
#define BINPRM_BUF_SIZE 128
There would be errors when @PERL@ (hostools/perl) is longer than 128,
use '/usr/bin/env perl' can fix the problem, but '/usr/bin/env perl -w'
doesn't work:
/usr/bin/env: perl -w: No such file or directory
So replace "perl -w" with "use warnings" to make it work.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Thu, 6 Apr 2017 10:05:50 +0000 (03:05 -0700)]
groff: replace "perl -w" with "use warnings"
The shebang's max length is usually 128 as defined in
/usr/include/linux/binfmts.h:
#define BINPRM_BUF_SIZE 128
There would be errors when @PERL@ (hostools/perl) is longer than 128,
use '/usr/bin/env perl' can fix the problem, but '/usr/bin/env perl -w'
doesn't work:
/usr/bin/env: perl -w: No such file or directory
So replace "perl -w" with "use warnings" to make it work.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 5 Apr 2017 16:27:20 +0000 (17:27 +0100)]
glibc/gcc/libgcc-initial: Delete do_build tasks for -initial
We've had a lot of users running into RSS issues where -initial recipes
were being installed into sysroots alongside their counterparts and
causing overlapping files issues.
In general this was through do_build dependencies. Such dependencies are
bad in general and I'd encourage people to compare the taskgraphs with
using a more specific dependency like do_populate_sysroot, do_image_complete
or do_deploy as often the more specific dependency will result in a much
cleaner build.
Regardless, we don't want -initial dependencies getting in the way like
this and there are cases a do_build dependency could make sense.
Deleting the do_build task in these cases makes sense since this is not
a build "endpoint" we'd ever want a user to use, its a behind the scenes
piece of bootstrappping.
Unfortunately to make this work, we need a newer bitbake version which
has a bitbake bug fixed.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Balik [Wed, 5 Apr 2017 10:38:57 +0000 (12:38 +0200)]
busybox: Security fix BUG9071
Signed-off-by: Martin Balik <martin.balik@siemens.com> Signed-off-by: Pascal Bach <pascal.bach@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mem_get_bits_rectangle function in Artifex Software, Inc.
Ghostscript 9.20 allows remote attackers to cause a denial
of service (NULL pointer dereference) via a crafted PostScript
document.
David Vincent [Wed, 5 Apr 2017 15:43:07 +0000 (17:43 +0200)]
package.bbclass: add CONFFILES to pkgdata
Emit CONFFILES variable in pkgdata, or else the get_conffiles function
will return 'None' for some packages instead of the expected value. This
is especially true for optional module packages.
Signed-off-by: David Vincent <freesilicon@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
package_ipk.bbclass: Replace empty lines in DESCRIPTION with '.'
opkg uses empty lines as separator for next package and if an ipk file was
packaged with empty lines in DESCRIPTION opkg won't be able to handle such ipk
file, this happens at execution time.
This commit will replace empty lines in DESCRIPTION with a '.' when generating
an ipk package to avoid this issue.
[YOCTO #10677]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patrick Ohly [Wed, 5 Apr 2017 13:36:05 +0000 (15:36 +0200)]
yocto-compat-layer: limit report of signature changes
Typically a single change cascades through the entire task dependency
chain. Developers had to figure that out themselves, based on hard to
read and interpret output (not sorted, no indention, no explanations):
Now the tool automates the problem analysis: it retrieves the depgraph
using the tinfoil API and only reports those tasks with modified
signatures whose dependencies have not changed, i.e. those tasks which
definitely introduce a change.
>From the previous example, that just leaves two tasks that need to be
checked:
This pruning might be a bit too aggressive in the sense that tasks
which inherit a change and then add more changes themselves won't be
reported initially. They will be found when fixing the reported tasks
and re-running the check.
For a developer it seems better to have something listed which
definitely is a problem and needs fixing instead of everything,
including the tasks which don't need fixes.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patrick Ohly [Wed, 5 Apr 2017 13:36:04 +0000 (15:36 +0200)]
yocto-compat-layer: fix also other command invocations
In commit 5b9ac62ab535d, one place was fixed where a command was
invoked such that failures caused double stack traces and stderr was
lost. The same problem also occurs elsewhere, triggered for example by
a layer with parsing problems.
Now a new utility method is used instead of repeating the code.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Thu, 6 Apr 2017 06:41:37 +0000 (23:41 -0700)]
runqemu: use realpath for imgdir
The DEPLOY_DIR_IMAGE maybe relative or absolute path since it can be
read from env vars, so use realpath for both imgdir and
DEPLOY_DIR_IMAGE when compare.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
selftest/devtool: skip test in case of poky-tiny distro
The recipe being tested (devtoo-test-patch-gz) by devtool has dependencies (at
least libxres and virtual/libx11) that cannot be built with poky-tiny distro so
skip the test for this particular policy.
[YOCTO #10891]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
The library libxml2 can provide its own bindings for python2 in addition
to the third party python-lxml and python3-lxml packages if this
functionality is enabled in PACKAGECONFIG.
But in case the functionality is disabled there's no need to depend
on python2.
Make the dependency on python2 enabled only if the python feature
is added to PACKAGECONFIG. Also add missing run-time dependency on make
to libxml2-ptest.
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Mon, 3 Apr 2017 11:57:52 +0000 (12:57 +0100)]
libjpeg-turbo: don't depend on NASM for non-x86 targets
NASM is a x86-specific assembler so it is only required when building for x86
targets. Use x86-architecture and class-target overrides to depend on NASM, but
explicitly disable and don't depend on it for native as complications in the
native overrides meant NASM was enabled for x86-64 but disabled for x86 (this
will be investigated later).
Original patch by Tristan Van Berkom <tristan.vanberkom@codethink.co.uk>, more
work to solve selftest failures by Richard Purdie
<richard.purdie@linuxfoundation.org>. I just wrote a nice commit message.
Also fix some missing whitespace in _appends.
[ YOCTO #11240 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Jussi Kukkonen [Thu, 30 Mar 2017 16:49:28 +0000 (19:49 +0300)]
quilt: Fix paths for patch and perl
Currently some shebang lines end up as
#! /usr/bin/env perl -w
env does not like the argument. Also the current sed to insert env
does not cover the copies ptests use. Fix these issues by:
- using --with-perl to insert "env"
- Replacing "-w" in shebang lines with a new "use warning;" line
Remove a EXTRA_OECONF_append_class_target from the native recipe.
Don't overwrite EXTRA_OECONF in native: the values should be correct
for native as well.
--with-patch is used within the gnu patch wrapper only: before this
commit the wrapper contained a (build host) path to native patch.
Also tweak one test so busybox mv output is accepted.
All ptests should now pass: Fixes [YOCTO #11221].
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Chen Qi [Thu, 30 Mar 2017 08:37:36 +0000 (16:37 +0800)]
wic: improve error message
When using `wic create mkefidisk -e core-image-minimal', the following
error message appeared.
Please bake it with 'bitbake parted-native' and try again.
However, following this command doesn't do any help. The same problem
still appeared.
The problem is that when we 'bitbake parted-native', it doesn't have
anything to do with core-image-minimal. And the required tool 'parted'
is not under core-image-minimal's recipe-sysroot-native directory.
Improve the error message so that following it could get things done.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Mon, 3 Apr 2017 15:58:36 +0000 (18:58 +0300)]
build-perf-test-wrapper.sh: make it possible to specify Git branch name
Support <branch>:<commit> format for the -c argument. This makes it
possible to test older commits of a certain branch (not just the tip of
it) so that the branch name will still be correctly recorded in the test
report data.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
The javascript console log messages are used in scraping, when
converting an html test report to html email. Before this patch a
console message indicating that all charts have been drawn was not
correctly sent if the last test failed (or didn't have chart data for
some other reason) which, in turn, caused oe-build-perf-report-email.py
script to fail with a timeout.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Mon, 3 Apr 2017 15:58:33 +0000 (18:58 +0300)]
scripts/oe-build-perf-report: better guessing of args
When getting info from the latest commit, don't search all refs but only
branches. We don't get correct data from refs/tags/* or refs/notest/*,
for example.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Mark Hatle [Fri, 31 Mar 2017 02:30:29 +0000 (21:30 -0500)]
yocto-compat-layer.py: Fix the signature validation
The initial signatures need to be collected -after- the dependency layers have
been added to the system. Otherwise changes that happen due to dependencies,
outside of the layer being scanned, will show up as signature problems.
The add_layer function was split into two pieces so that we can process
the dependencies first, and then add the layer itself for the comparison.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Mark Hatle [Fri, 31 Mar 2017 02:30:28 +0000 (21:30 -0500)]
compatlayer/__init__.py: Allow add_layer to process recursive deps
When processing a layer for dependencies, you have to process the layer
itself, it's dependencies, the dependencies dependencies and so forth until
all items have been processed.
Mark Hatle [Fri, 31 Mar 2017 02:30:27 +0000 (21:30 -0500)]
yocto-compat-layer.py: Add --dependency argument
When processing a large number of items, there are times that it would be
nice to be able to pass in a series of layers that can be used as dependencies
for the layer that is being scanned. This avoids the significant overhead
of processing all of the layers to compatibility.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 4 Apr 2017 14:40:01 +0000 (15:40 +0100)]
gpgme: fix configure if 'import distutils' causes output on stderr
There are a number of reasons that importing a module could cause output on
stderr that isn't a fatal error (compatibilty problems with inputrc, or encoding
warnings) so backport a patch from autoconf-archive to only check the exit code
instead of asserting that stderr is empty.
[ YOCTO #11231 ]
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
selftest/devtool: use kernel provider instead of recipe allowing other kernel providers
To generalize the unit test for other kernel providers, use virtual/kernel instead
of linux-yocto, allowing to run the selftest on non-poky distros, i.e. poky-tiny.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Tue, 4 Apr 2017 08:02:02 +0000 (10:02 +0200)]
x86-base.inc, qemuarm.conf: prefer 4.10 version of linux-yocto
* 4.8 version was removed in:
commit 466e6e45ca04a07ebe1b1f52de747f077b362d54
Author: Bruce Ashfield <bruce.ashfield@windriver.com>
Date: Tue Mar 28 08:58:07 2017 -0400
linux-yocto: drop 4.8 recipes
We have 4.1 (LTSI), 4.4 (LTS), 4.9 (LTS/LTSI) and 4.10 available in
master. 4.8 is no longer required, so we drop the recipe to keep
the version selection under control.
* causing each build to start with 188 lines of this stuff:
NOTE: preferred version 4.8% of linux-yocto not available (for item virtual/kernel)
NOTE: versions of linux-yocto available: 4.1.38+gitAUTOINC+7140ddb86e_4d2c95e78c 4.10.5+gitAUTOINC+01f18cba44_b97dcd4f06 4.4.56+gitAUTOINC+271b0c8d51_01aaede0a2 4.9.17+gitAUTOINC+8b97a445fa_3ff3760c2a
NOTE: preferred version 4.8% of linux-yocto not available (for item kernel-module-raid456)
NOTE: versions of linux-yocto available: 4.1.38+gitAUTOINC+7140ddb86e_4d2c95e78c 4.10.5+gitAUTOINC+01f18cba44_b97dcd4f06 4.4.56+gitAUTOINC+271b0c8d51_01aaede0a2 4.9.17+gitAUTOINC+8b97a445fa_3ff3760c2a
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ming Liu [Thu, 30 Mar 2017 13:20:13 +0000 (15:20 +0200)]
kernel.bbclass: move in addtask kernel_link_images statement from linux-yocto.inc
Add kernel_link_images task in kernel.bbclass instead of adding it in
linux-yocto.inc, or else the recipes inheriting kernel.bbclass might
run into implicit dependency issues.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
brian avery [Tue, 4 Apr 2017 23:23:24 +0000 (16:23 -0700)]
devtool: point runqemu to correct native bindir
devtool/runqemu.py was relying on STAGING_BINDIR_NATIVE to find the host
tools it needed like qemu-system-<arch>. In the post RSS world, this no
longer exists. This patch points it to
{STAGING_DIR}/{BUILD_ARCH}/{bindir_native}.
[YOCTO #11223]
Signed-off-by: brian avery <brian.avery@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
brian avery [Tue, 4 Apr 2017 22:22:11 +0000 (15:22 -0700)]
meta-ide-support: exclude this recipe from rm_work
The results of meta-ide-support are used by utilities like runqemu and
runqemu-extract-sdk. Since the usr/bin that meta-ide-support creates is
subsequently removed bu rm_work, we exclude this recipe from the rm_work
list.
[YOCTO #11119]
Signed-off-by: brian avery <brian.avery@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
brian avery [Tue, 4 Apr 2017 22:22:10 +0000 (15:22 -0700)]
scripts: change way we find native tools (pseudo)
oe-find-native-sysroot: Recipe Specific Sysroots have eliminated the
large STAGING_DIR_NATIVE. Now, we will rely on the meta-ide-support
sysroot that is what was populating the large STAGING_DIR_NATIVE in
previous versions anyway. We now look for RECIPE_SYSROOT_NATIVE.
[YOCTO #11119]
Signed-off-by: brian avery <brian.avery@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Serhii Popovych [Fri, 31 Mar 2017 11:46:58 +0000 (11:46 +0000)]
automake: Adjust shebang lines to remove interpreter path hardcode
If build host perl (and other tools) is old and we use some kind
of toolchain to provide recent perl/python/etc to the OE build
we still locked to use build host perl due to hardcoded shebang
lines in automake scripts.
Behaviour was observed with Enterprise Linux 6 and devtoolset
toolchain from SCL (Software Collections) used to provide recent
version of perl (not provided with default buildtools-tarball).
Pass /usr/bin/env perl in ac_cv_path_PERL configuration variables
for class-native and class-nativesdk. Use patch to automake to replace
-w option in shebang line with modern way to enable warnings on perl
(i.e. "use warnings").
Also add nativesdk-autoconf to RDEPENDS to bring runtime dependencies
inline with other targets.
Note that ac_cv_path_PERL must be valid perl interpreter path
since configure will check perl version and Flock implementation.
It is not possible currently to use nativeperl from native
sysroot because automake does not DEPENDS on perl-native (and
doing so fails due to circular dependencies). Only possible
solution is to overwrite shebangs with nativeperl somewhere at
do_install() and update RDEPENDS for class-native. Or add perl
symlinks to nativeperl in sysroot.
For now it seems good to use perl found by /usr/bin/env from
automake-native.
Serhii Popovych [Fri, 31 Mar 2017 11:46:57 +0000 (11:46 +0000)]
autoconf: Adjust shebang lines to remove interpreter path hardcode
If build host perl (and other tools) is old and we use some kind
of toolchain to provide recent perl/python/etc to the OE build
we still locked to use build host perl due to hardcoded shebang
lines in autoconf scripts.
Behaviour was observed with Enterprise Linux 6 and devtoolset
toolchain from SCL (Software Collections) used to provide recent
version of perl (not provided with default buildtools-tarball).
Pass /usr/bin/env perl in ac_cv_path_PERL configuration variables
for class-native and class-nativesdk. Use patch to autoconf to replace
-w option in shebang line with modern way to enable warnings on perl
(i.e. "use warnings").
Also add nativesdk-m4 and nativesdk-gnu-config to RDEPENDS to bring
runtime dependencies inline with other targets.
Note that ac_cv_path_PERL must be valid perl interpreter path
since configure will check perl version and Flock implementation.
It is not possible currently to use nativeperl from native
sysroot because autoconf does not DEPENDS on perl-native (and
doing so fails due to circular dependencies). Only possible
solution is to overwrite shebangs with nativeperl somewhere at
do_install() and update RDEPENDS for class-native. Or add perl
symlinks to nativeperl in sysroot.
For now it seems good to use perl found by /usr/bin/env from
autoconf-native.
Markus Lehtonen [Fri, 31 Mar 2017 14:07:30 +0000 (17:07 +0300)]
scripts/contrib: add oe-build-perf-report-email
Script for sending build perf test reports as an email. Mangles an html
report, generated by oe-build-perf-report, into a format suitable for
html emails. Supports multipart emails where a plaintext alternative can
be included in the same email.
Dependencies required to be installed on the host:
- phantomjs
- optipng
[YOCTO #10931]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Markus Lehtonen [Fri, 31 Mar 2017 14:07:29 +0000 (17:07 +0300)]
scripts: add oe-build-perf-report script
A new tool for pretty-printing build perf test results stored in a Git
repository. The scripts is able to produce either simple plaintext
report showing the difference between two commits, or, an html report
that also displays trendcharts of the test results. The script uses
Jinja2 templates for generating HTML reports so it requires
python3-jinja2 to be installed on the system.
[YOCTO #10931]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Juro Bystricky [Fri, 31 Mar 2017 21:28:13 +0000 (14:28 -0700)]
ncurses_6.0: Improve reproducibility
Build static libraries without the binutils "ar" -U option.
This option deliberately breaks deterministic mode.
The option seems to be a relic from 2015, intended as a workaround
for some unspecified build problems.
[YOCTO#11247]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 31 Mar 2017 13:39:16 +0000 (14:39 +0100)]
dpkg: Add PACKAGECONFIG for liblzma and enable it
liblzma is part of xz and we already build it but configure it out. This makes
no sense. Enabling it means we gain multithreaded compression and it speeds
dpkg-deb up massively. It also removes the fork overhead of separate xz processes.
Turning the existing config into a PACKAGECONFIG and turning it on by default
therefore makes best use of what we have available.
The manual RDEPENDS are no longer needed since it uses liblzma which is picked
up by the shlibs code magically.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ming Liu [Thu, 30 Mar 2017 07:59:58 +0000 (09:59 +0200)]
kernel.bbclass: introduce INITRAMFS_IMAGE_NAME
It defaults to ${INITRAMFS_IMAGE}-${MACHINE} if INITRAMFS_IMAGE is not
empty.
This allows the end users to be able to override the initramfs image
name with a customized value.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Daniel Díaz [Thu, 23 Mar 2017 21:34:44 +0000 (15:34 -0600)]
base-files: resize only serial tty's in profile
We don't want to run resize on non serial consoles. There's
been an earlier attempt (6557787), so this builds upon that.
The problem we're seeing is that if there is text buffered in
the virtual console (like from a desperate user trying to
enter login details), resize will get stuck while calling
ioctl(tty, TCSETAW);
Since serial consoles are named (not just numbered), this
change limits resize's reach even further to run only on
/dev/tty[A-z] (thus avoiding /dev/tty[0-9]).
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
lsb: Create ${base_prefix}/lib64 correctly when needed
There were two remaining cases that could end up creating /lib64
rather than ${base_prefix}/lib64. The difference matters when building
with usrmerge.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use ${D}${var} rather than ${D}/${var} for variables where ${var}
contains an absolute path.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Mon, 27 Mar 2017 10:39:13 +0000 (03:39 -0700)]
oe-run-native: OLDPATH -> OLD_PATH
It's a typo.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enrico Jorns [Wed, 29 Mar 2017 09:07:33 +0000 (11:07 +0200)]
systemd: make vconsole a PACKAGECONFIG option
Allowing to remove the systemd-vconsole-setup package without specifying
the --disable-vconsole configure option for systemd will make the system
boot with the failure prompt
| systemd-udevd[142]: failed to execute '/lib/systemd/systemd-vconsole-setup' '/lib/systemd/systemd-vconsole-setup': No such file or directory
| systemd-udevd[96]: Process '/lib/systemd/systemd-vconsole-setup' failed with exit code 2.
as the 90-vconsole.rules will still be installed with having a
RUN+="/lib/systemd/systemd-vconsole-setup" in it that attempts to
execute a non-existing binary.
Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ming Liu [Thu, 30 Mar 2017 13:17:04 +0000 (15:17 +0200)]
kernel.bbclass: fix a typo
In a addtask statement, do_strip should be strip.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Daniel Schultz [Thu, 30 Mar 2017 07:07:13 +0000 (09:07 +0200)]
wic: partition: Update fsck parameters
These parameters are copied from the ext image class.
-D will let fsck perform further directory optimizations
-v might be helpful for debugging purpose
Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Thu, 30 Mar 2017 18:17:20 +0000 (21:17 +0300)]
wic: remove prepare_empty_partition_squashfs
There is not much sense in creation of empty squashfs
partition. It's also not possible to create empty squashfs
partition of specified size.
Even more, prepare_empty_partition_squashfs method is
absolutely broken. It raises exception when called and
even its signature differs from the rest of of similar
methods. It means that nobody uses it and it's safe
to remove it.
Removed prepare_empty_partition_squashfs method and
testing of empty squashfs partition.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
