Will Page [Tue, 13 Aug 2019 18:37:15 +0000 (11:37 -0700)]
uboot: fixes to uboot-extlinux-config attribute values
The way this class uses overrides to support generation of multiple
sections is subject to two different issues: 1) labels that conflict
with existing override names causing the value for the conflicting label
to be set for all labels, and 2) reusing the override list through each
iteration, prepending each new label to the list of overrides makes
earlier labels' value take precedence over later labels, making later
labels virtually impossible to customize.
The first issue is resolved by removing all label names from overrides
before iterating over labels. The second issue is resolved by
generating a fresh list of overrides with only the current label added.
The current label is also appended to the list of overrides instead of
prepended, which makes it the highest priority override. This is
matches the behavior of devtool-source.bbclass, which similarly
monkey-patches overrides.
insane.bbclass: in file-rdeps do not look into RDEPENDS recursively
Recursive RDEPENDS resolution requires that all of the dependent
recipes' packaging has completed. There is no mechanism to ensure that
and therefore races were observed.
This change effectively requires recipes to list their runtime file
dependencies explicitly rather than have them pulled indirectly.
This may require a bit of fixing in layers, but should result
in a better definition of runtime file dependencies.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 13 Aug 2019 18:48:39 +0000 (19:48 +0100)]
gcc-cross-canadian: Drop obsolete shlibs exclusion
This is a very old change as and be inferred from the name in the comment.
We've since had many changes to pkgdata including separating it
to its own sysroot now so the reasons for this blanket exclusion are
likely long gone.
If the shlib provides were really the problem I'd much rather have
a dedicated variable for that too.
Removing this fixes missing dependencies on nativesdk-libc and other
libs which would then happen automatically.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Tue, 13 Aug 2019 15:28:35 +0000 (08:28 -0700)]
gcc-runtime: Move content from gcclibdir into libdir
OE does not use the traditional /usr/lib/gcc prefix to store gcc-runtime
it basically is moved into libdir, however some newer files were
installed by newer versions of gcc especially libgomp ( omp.h openacc.h )
into gcclibdir, so we have content in both directories, this confuses
other tools which are trying to guess the gcc installation and its
runtime location, since now we have two directories, the tools either
choose one or other and we get inconsistent behavior, e.g. clang for
aarch64 uses /usr/lib but same clang for riscv64 chose /usr/lib/gcc
This change ensures that OE ends up with single valid location for gcc
runtime files
Move more common bits into common inc file
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Mon, 12 Aug 2019 01:59:45 +0000 (18:59 -0700)]
oeqa/parselogs: grep for exact errors list keywords
Given grep expression looks for error strings regardless of the
semantics and this ends up it flagging things like
***********************
Log: /mnt/a/yoe/build/tmp/work/raspberrypi3_64-yoe-linux-musl/yoe-qt5-wayland-image/1.0-r0/target_logs/weston.log
-----------------------
Central error: EGL_KHR_create_context_no_error EGL_KHR_fence_sync
***********************
here EGL_KHR_create_context_no_error is an API, therefore the check
should be tightened a bit so explicitly look for error words so such
false positives don't show up
This helps in fixing wrong matches e.g. on rpi3 dmesg have strings like
above
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Sat, 10 Aug 2019 18:05:40 +0000 (11:05 -0700)]
oeqa/buildgalculator.py: Add dependency on gtk+3
This helps in skipping this test on images which are not using gtk and
as per the gcalculator website it needs gtk+3 or gtk+2 and libglade as
the build first looks for gtk+3
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changqing Li [Tue, 13 Aug 2019 08:36:22 +0000 (16:36 +0800)]
go-runtime: remove conflict files from -dev packages
fix below error:
file /usr/lib64/go/src/cmd/cgo/zdefaultcc.go conflicts between attempted installs of go-dev-1.12.6-r0.core2_64 and go-runtime-dev-1.12.6-r0.core2_64
file /usr/lib64/go/src/cmd/go/internal/cfg/zdefaultcc.go conflicts between attempted installs of go-dev-1.12.6-r0.core2_64 and go-runtime-dev-1.12.6-r0.core2_64
these 2 files existed in both go-dev and go-runtime-dev
remove it from go-runtime-dev to fix the problem
Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wenlin Kang [Fri, 9 Aug 2019 08:39:48 +0000 (16:39 +0800)]
db: add switch for building database verification
Add switch for building database verification, enable
this, it will solve the following issue:
root@qemux86-64:~# db_verify /var/lib/rpm/Packages
db_verify: BDB0571 library build did not include support for database verification BDB5105 Verification of /var/lib/rpm/Packages failed.
Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mesa: enable glx-tls option in native and nativesdk builds
Before meson conversion this was always enabled; now it needs to
be explicitly switched on.
This un-breaks the virgl headless test in particular, which regressed
with the meson conversion (and the test is not currently run on AB
due to oudated graphics hardware in it).
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bedel, Alban [Wed, 17 Jul 2019 14:20:44 +0000 (14:20 +0000)]
boost: Fix build and enable context and coroutines on aarch64
Like for ARM bjam need some hints about the ABI to properly build on
aarch64. While at it also enable context and coroutine as these are
supported on aarch64.
Signed-off-by: Alban Bedel <alban.bedel@aerq.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* this might be related to:
commit d2fcaeb153fdc3f8d7143ea823139f1537055ff1
Author: Douglas Royds <douglas.royds@taitradio.com>
Date: Thu Dec 20 11:59:47 2018 +1300
icecc: Don't generate recipe-sysroot symlinks at recipe-parsing time
* it's still a bit unclear when and why this happends, but I'm seeing
random tasks sometimes failing with:
WARNING: Exception during build_dependencies for set_icecc_env
WARNING: Error during finalise of /build/meta-oe/meta-python/recipes-devtools/python/python-markupsafe_1.0.bb
ERROR: Traceback (most recent call last):
File "/build/bitbake/lib/bb/data_smart.py", line 411, in expandWithRefs
s = __expand_python_regexp__.sub(varparse.python_sub, s)
File "/build/bitbake/lib/bb/data_smart.py", line 136, in python_sub
value = utils.better_eval(codeobj, DataContext(self.d), {'d' : self.d})
File "/build/bitbake/lib/bb/utils.py", line 421, in better_eval
return eval(source, ctx, locals)
File "Var <set_icecc_env>", line 1, in <module>
File "/build/oe-core/meta/classes/icecc.bbclass", line 287, in icecc_get_and_check_tool
link_path = icecc_get_tool_link(t, d)
File "/build/oe-core/meta/classes/icecc.bbclass", line 246, in icecc_get_tool_link
return subprocess.check_output("readlink -f %s" % tool, shell=True).decode("utf-8")[:-1]
File "/usr/lib/python3.6/subprocess.py", line 336, in check_output
**kwargs).stdout
File "/usr/lib/python3.6/subprocess.py", line 418, in run
output=stdout, stderr=stderr)
subprocess.CalledProcessError: Command 'readlink -f /build/BUILD/work/qemux86-oe-linux/python-markupsafe/1.0-r0/recipe-sysroot-native/usr/bin/x86_64-oe-linux/x86_64-oe-linux-g++' returned non-zero exit status 1.
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/build/bitbake/bin/bitbake-worker", line 239, in child
the_data = bb_cache.loadDataFull(fn, appends)
File "/build/bitbake/lib/bb/cache.py", line 327, in loadDataFull
bb_data = self.load_bbfile(virtualfn, appends, virtonly=True)
File "/build/bitbake/lib/bb/cache.py", line 340, in load_bbfile
datastores = parse_recipe(bb_data, bbfile, appends, mc)
File "/build/bitbake/lib/bb/cache.py", line 303, in parse_recipe
bb_data = bb.parse.handle(bbfile, bb_data)
File "/build/bitbake/lib/bb/parse/__init__.py", line 107, in handle
return h['handle'](fn, data, include)
File "/build/bitbake/lib/bb/parse/parse_py/BBHandler.py", line 142, in handle
return ast.multi_finalize(fn, d)
File "/build/bitbake/lib/bb/parse/ast.py", line 386, in multi_finalize
finalize(fn, d)
File "/build/bitbake/lib/bb/parse/ast.py", line 351, in finalize
bb.parse.siggen.finalise(fn, d, variant)
File "/build/bitbake/lib/bb/siggen.py", line 147, in finalise
taskdeps = self._build_data(fn, d)
File "/build/bitbake/lib/bb/siggen.py", line 118, in _build_data
tasklist, gendeps, lookupcache = bb.data.generate_dependencies(d)
File "/build/bitbake/lib/bb/data.py", line 388, in generate_dependencies
deps[dep], values[dep] = build_dependencies(dep, keys, shelldeps, varflagsexcl, d)
File "/build/bitbake/lib/bb/data.py", line 317, in build_dependencies
value, parsedvar = d.getVarFlag(key, "_content", False, retparser=True)
File "/build/bitbake/lib/bb/data_smart.py", line 802, in getVarFlag
parser = self.expandWithRefs(value, cachename)
File "/build/bitbake/lib/bb/data_smart.py", line 424, in expandWithRefs
raise ExpansionError(varname, s, exc).with_traceback(tb) from exc
File "/build/bitbake/lib/bb/data_smart.py", line 411, in expandWithRefs
s = __expand_python_regexp__.sub(varparse.python_sub, s)
File "/build/bitbake/lib/bb/data_smart.py", line 136, in python_sub
value = utils.better_eval(codeobj, DataContext(self.d), {'d' : self.d})
File "/build/bitbake/lib/bb/utils.py", line 421, in better_eval
return eval(source, ctx, locals)
File "Var <set_icecc_env>", line 1, in <module>
File "/build/oe-core/meta/classes/icecc.bbclass", line 287, in icecc_get_and_check_tool
link_path = icecc_get_tool_link(t, d)
File "/build/oe-core/meta/classes/icecc.bbclass", line 246, in icecc_get_tool_link
return subprocess.check_output("readlink -f %s" % tool, shell=True).decode("utf-8")[:-1]
File "/usr/lib/python3.6/subprocess.py", line 336, in check_output
**kwargs).stdout
File "/usr/lib/python3.6/subprocess.py", line 418, in run
output=stdout, stderr=stderr)
bb.data_smart.ExpansionError: Failure expanding variable set_icecc_env, expression was if [ "${@use_icecc(bb, d)}" = "no" ]
then
return
fi
ICECC_VERSION="${@icecc_version(bb, d)}"
if [ "x${ICECC_VERSION}" = "x" ]
then
bbwarn "Cannot use icecc: could not get ICECC_VERSION"
return
fi
ICE_PATH="${@icecc_path(bb, d)}"
if [ "x${ICE_PATH}" = "x" ]
then
bbwarn "Cannot use icecc: could not get ICE_PATH"
return
fi
ICECC_BIN="${@get_icecc(d)}"
if [ -z "${ICECC_BIN}" ]; then
bbwarn "Cannot use icecc: icecc binary not found"
return
fi
if [ -z "$(which patchelf patchelf-uninative)" ]; then
bbwarn "Cannot use icecc: patchelf not found"
return
fi
# Create symlinks to icecc in the recipe-sysroot directory
mkdir -p ${ICE_PATH}
if [ -n "${KERNEL_CC}" ]; then
compilers="${@get_cross_kernel_cc(bb,d)}"
else
compilers="x86_64-oe-linux-gcc x86_64-oe-linux-g++"
fi
for compiler in $compilers; do
ln -sf ${ICECC_BIN} ${ICE_PATH}/$compiler
done
ICECC_CC="${@icecc_get_and_check_tool(bb, d, "gcc")}"
ICECC_CXX="${@icecc_get_and_check_tool(bb, d, "g++")}"
# cannot use icecc_get_and_check_tool here because it assumes as without target_sys prefix
ICECC_WHICH_AS="${@bb.utils.which(os.getenv('PATH'), 'as')}"
if [ ! -x "${ICECC_CC}" -o ! -x "${ICECC_CXX}" ]
then
bbwarn "Cannot use icecc: could not get ICECC_CC or ICECC_CXX"
return
fi
ICE_VERSION=`$ICECC_CC -dumpversion`
ICECC_VERSION=`echo ${ICECC_VERSION} | sed -e "s/@VERSION@/$ICE_VERSION/g"`
if [ ! -x "/build/BUILD/work/qemux86-oe-linux/python-markupsafe/1.0-r0/recipe-sysroot-native/usr/bin/icecc-create-env" ]
then
bbwarn "Cannot use icecc: invalid ICECC_ENV_EXEC"
return
fi
ICECC_AS="`${ICECC_CC} -print-prog-name=as`"
# for target recipes should return something like:
# /OE/tmp-eglibc/sysroots/x86_64-linux/usr/libexec/arm920tt-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/4.8.2/as
# and just "as" for native, if it returns "as" in current directory (for whatever reason) use "as" from PATH
if [ "`dirname "${ICECC_AS}"`" = "." ]
then
ICECC_AS="${ICECC_WHICH_AS}"
fi
if [ ! -f "${ICECC_VERSION}.done" ]
then
mkdir -p "`dirname "${ICECC_VERSION}"`"
# the ICECC_VERSION generation step must be locked by a mutex
# in order to prevent race conditions
if flock -n "${ICECC_VERSION}.lock" \
/build/BUILD/work/qemux86-oe-linux/python-markupsafe/1.0-r0/recipe-sysroot-native/usr/bin/icecc-create-env "${ICECC_CC}" "${ICECC_CXX}" "${ICECC_AS}" "${ICECC_VERSION}"
then
touch "${ICECC_VERSION}.done"
elif ! wait_for_file "${ICECC_VERSION}.done" 30
then
# locking failed so wait for ${ICECC_VERSION}.done to appear
bbwarn "Timeout waiting for ${ICECC_VERSION}.done"
return
fi
fi
# Don't let ccache find the icecream compiler links that have been created, otherwise
# it can end up invoking icecream recursively.
export CCACHE_PATH="$PATH"
export CCACHE_DISABLE="1"
Kai Kang [Thu, 8 Aug 2019 15:45:13 +0000 (11:45 -0400)]
e2fsprogs: 1.44.5 -> 1.45.3
Update e2fsprogs from 1.44.5 to 1.45.3:
* rebase ptest.patch
* remove 0001-create_inode-fix-copying-large-files.patch which merged by upstream
* add new sub-package e2fsprogs-e2scrub and disable cron support
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 9 Aug 2019 09:41:55 +0000 (10:41 +0100)]
python3-pygobject: Add missing pkgutil RDEPENDS
With the removal of setuputils, there was a missing runtime dependency on pkgutil
which was breaking the selftests for gobject-introspection at runtime. Fix this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove it from RDEPENDS to shrink the runtime dependency chain, as
setuptools includes scripts to download other packages, which might not
be desired on a minimal image.
Signed-off-by: Luca Boccassi <luca.boccassi@microsoft.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jason Wessel [Thu, 8 Aug 2019 20:24:00 +0000 (13:24 -0700)]
dpkg: Provide update-alternative for start-stop-daemon
When using DISTRO_FEATURE usrmerge, busybox and something that
requires dpkg-start-stop there is a conflict which prints the
following error.
===
ERROR: core-image-minimal-1.0-r1 do_rootfs: Postinstall scriptlets of ['busybox'] have failed. If the intention is to defer them to first boot,
then please place them into pkg_postinst_ontarget_${PN} ().
Deferring to first boot via 'exit 1' is no longer supported.
Details of the failure are in /build/tmp-glibc/work/intel_x86_64-linux/core-image-minimal/1.0-r1/temp/log.do_rootfs.
ERROR: core-image-minimal-1.0-r1 do_rootfs: Function failed: do_rootfs
===
Looking at the log file, it shows the problem:
update-alternatives: Error: not linking /build/tmp-glibc/work/intel_x86_64-linux/core-image-minimal/1.0-r1/rootfs/usr/sbin/start-stop-daemon to /usr/bin/busybox.nosuid since /build/tmp-glibc/work/intel_x86_64-linux/core-image-minimal/1.0-r1/rootfs/usr/sbin/start-stop-daemon exists and is not a link
===
The solution is to add an update-alternative to start-stop-daemon for dpkg.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As for the removal of the bb.warn, if the size is not specified, it is
not something to warn the end user about. Some of my default images
make use of the head room + a computed directory size or while generating
images.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jason Wessel [Thu, 8 Aug 2019 20:23:58 +0000 (13:23 -0700)]
wic: Add partition type for msdos partition tables
In order to create a msdos partition table disk image that can auto
expand after the image is copied to an SD card, wic needs the ability
to have a primary partition as the last entry. The desired use case
is to be able to create an A/B update partition image scheme with a
/var volume that can be auto expanded to the remainder of the SD card
at run time.
The typical .wks file will look similar to the following:
With the patch applied a primary partition can be created at the end
of the image which can be expanded to fill the free space on the media
where the image has been copied, which looks like:
Disk boot.img: 890940s
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Jason Wessel [Thu, 8 Aug 2019 20:23:57 +0000 (13:23 -0700)]
image_types_wic.bbclass: Copy the .wks and .env files to deploy image dir
When using a .wks.in file, the only place that the generated .wks file
exists in the tmp/work area. A copy should be left behind in the
deploy directory so that you can easily run the wic tool to
re-generate or modify a new image without running bitbake. Custom
.wks.in files can reference any number of bitbake variables, so it is
important to save the result.
below is an example of using the generated .wks file in the deploy
area. The full name of my generated .wks file was
core-image-minimal-ostree-uboot-ab.wks, but since you usually only
have a single .wks file per image you can use a wild card like:
Ricardo Neri [Mon, 5 Aug 2019 22:18:23 +0000 (18:18 -0400)]
runqemu: Add support to handle EnrollDefaultKeys PK/KEK1 certificate
The EnrollDefaultKeys.efi application (distributed in ovmf-shell-image)
expects the hypervisor to provide a Platform Key and first Key Exchange
Key certificate.
For QEMU, this is done by adding an OEM string in the Type 11 SMBIOS
table. The string contains the EnrollDefaultKeys application GUID followed
by the certificate string. For now, the string is passed in the command
line until QEMU understands OEM strings from regular files (please see
https://bugs.launchpad.net/qemu/+bug/1826200).
If runqemu detects it is given an OVMF binary with support for Secure Boot
(i.e., ovmf.secboot* binaries), extract the certificate string from the
OvmfPkKek1.pem certificate and modify the command-line parameters to
provide the key. Such certificate is created when building OVMF with
support for Secure Boot.
Cc: Ross Burton <ross.burton@intel.com> Cc: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
ovmf: Generate test Platform key and first Key Exchange Key
Commit from EDK2 be9470b3c91f ("OvmfPkg/EnrollDefaultKeys: enroll
PK/KEK1 from the Type 11 SMBIOS table") mandates that a Platform Key
and first Key Exchange Key certificate is provided to the
EnrollDefaultKeys application.
Previously, the application was using a hard-coded certificate
from Red Hat embedded in the application.
Create a certificate that can QEMU can subsequently pass to
EnrollDefaultKeys when running qemu-shell-image.
Cc: Ross Burton <ross.burton@intel.com> Cc: Patrick Ohly <patrick.ohly@intel.com> Cc: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Update OVMF to edk2-stable201905. Since the last update, several things
have changed. Many of the patches we were carrying have now been taken
upstream in EDK2 or become obsolete. See below for details.
Also, as of commit 0c1ffb9504c3("CryptoPkg: Adding OpenSSL as one
submodule of EDKII repo"), openssl is not embedded into EDK2 using a
patching script but a git submodule. Then, use the gitsm bitbabke fetcher
and drop the extra SRC_URI from openssl when building with secureboot
enabled. Also remove all related variables.
OVMF switched to BSD+Patent license as detailed in
https://bugzilla.tianocore.org/show_bug.cgi?id=1373. Hence, update
LIC_FILES_CHKSUM accordingly to reflect this change.
Patches are updated as follows:
Drop 0001-ia32-Dont-use-pie.patch as it is implemented in upstream EDK2
in commits are 11d0cd23dd1b ("BaseTools/tools_def IA32: drop -no-pie linker
option for GCC49" and c25d3905523a ("BaseTools/tools_def IA32: disable PIE
code generation explicitly") for the applicable GCC versions.
Rebase 0003-BaseTools-makefile-adjust-to-build-in-under-bitbake.patch
to edk2-stable201905.
Drop VfrCompile-increase-path-length-limit.patch as it has been taken
upstream in EDK2 in commit ba78032bc8c9f("BaseTools/VfrCompile: Remove the
MAX_PATH limitation").
Rebase no-stack-protector-all-archs.patch to keep behavior on not using
stack protector on all archs.
Drop 0001-BaseTools-header.makefile-add-Wno-stringop-truncatio.patch,
0002-BaseTools-header.makefile-add-Wno-restrict.patch, and
0003-BaseTools-header.makefile-revert-gcc-8-Wno-xxx-optio.patch. These
patches have been taken in upstream EDK2 in commits 9222154ae7b3("BaseTools
/header.makefile: add "-Wno-restrict"), 1d212a83df0e("BaseTools/
header.makefile: add "-Wno-stringop-truncation"), and 777f4aa083e9
("BaseTools/header.makefile: revert gcc-8 '-Wno-xxx' options on OSX"),
respectively.
Also, drop 0004-BaseTools-GenVtf-silence-false-stringop-overflow-war.patch.
GenVtf has been removed from EDK2 in commit 64ab2c82e8f6("BaseTools:
Remove GenVtf"). Also, this patch had been taken in EDK2 upstream in
commit 9de306701312("BaseTools/GenVtf: silence false 'stringop-overflow'
warning with memcpy()").
Drop patch 0007-OvmfPkg-EnrollDefaultKeys-application-for-enrolling-.patch
as it also has been taken by EDK2.
Patches 0002-ovmf-update-path-to-native-BaseTools.patch and
0004-ovmf-enable-long-path-file.patch did not need any update.
Lastly, add a needed dependency on bc.
Cc: Ross Burton <ross.burton@intel.com> Cc: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
do_rootfs failed with error:
file /usr/lib64/grub/arm64-efi/acpi.module conflicts between attempted installs of grub-2.02-r0.aarch64 and grub-efi-2.02-r0.aarch64
file /usr/lib64/grub/arm64-efi/adler32.module conflicts between attempted installs of grub-2.02-r0.aarch64 and grub-efi-2.02-r0.aarch64
...
file /usr/lib64/grub/arm64-efi/zfsinfo.module conflicts between attempted installs of grub-2.02-r0.aarch64 and grub-efi-2.02-r0.aarch64
For arm64, grub and grub-efi both compiled GRUBD2 with platform
arm64-efi, arm64 only support platform efi. So both packages have
almost same folder and content /usr/lib64/grub/arm64-efi/*
if Machine set to qemux86_64, do_rootfs will not have this problem,
since for grub, it compiled with platform i386-pc, for grub-efi,
compiled with platform x86-64-efi.
While installing grub and grub-efi, there are conflict files
in ${sysconfdir} ${datadir} ${bindir} ${sbindir}.
- Since all of the conflicted files are tools which is
common for grub and grub-efi, we split them (except
grub-editenv) to grub-common in grub.
common tools for grub and grub-efi are installed into grub-common,
for aarch64, also shipped libdir into this common packages.
in this way, for qemuarm64, package grub is empty, and package grub-efi
use lib in package grub-common
Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tim Blechmann [Thu, 8 Aug 2019 04:58:33 +0000 (12:58 +0800)]
deb: allow custom dpkg command
trying to reduce the turnaround times for local builds, i'm trying to
find a way to inject `-Zgzip -z1` into the dkpg-deb command line.
attached patch introduces a `DPKG_BUILDCMD` variable for this purpose.
(i'm not very familiar with the whole bitbake infrastructure, so i'm
wondering: do i have to add it to the `vardeps` of do_package_deb?)
tia,
tim
>From 62d4930d307d5d07844889001e8a1c3111b72b98 Mon Sep 17 00:00:00 2001
From: Tim Blechmann <tim@klingt.org>
Date: Thu, 8 Aug 2019 06:48:54 +0200
Subject: [PATCH] package_deb: allow dpkg-deb to be customized via
DPKG_BUILDCMD
the command line to invoke `dpkg-deb` is hardcoded. there are certain use
cases where we want to tweak how debian packages are compiled: e.g. the
default uses xz compression, which is rather CPU intensive. for local
builds one might want to pass `-Zgzip -z1` to favor speed over compression
ratio.
we therefore introduce a `DPKG_BUILDCMD` variable which allows downstream
code to customize how dpkg-deb is executed
Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
EXCLUDE_PACKAGES_FROM_SHLIBS is too broad: it suppresses both generation
of required and provided shlibs. We need to suppress only the provided shlibs
(to avoid clashes with the main package providing the same shlibs),
and run the required shlib dependencies generator as usual.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the code is compiled with "-fstack-protector-strong
-D_FORTIFY_SOURCE=2", everytime ftpfd is asked for a non existent file,
it crashes with the following error:
*** buffer overflow detected ***:
Aborted
This seems to be a bug/feature of gcc. A bug has been open on their
bugzilla, and also inetutils have been posted with the proposed patch.
Without this patch, pxelinux fails to boot because it keeps asking the
server for the pxelinux.cfg/00-01-02-03-04 and never jumps to /default.
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mesa,llvm,meson: Update llvm to 8.0.1 plus define and use LLVM version globally
- Add missing dependency on libedit
- Define LLVMVERSION on the same lines as GCCVERSION and other tools
- Use LLVMVERSION in mesa and meson.bbclass to get llvm version instead of
hardcoding it
- Use llvm patches unmodified from meta-clang, helps in keeping them in
sync
- Define PREFERRED_VERSION for llvm, llvm-native, nativesdk-llvm
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trevor Gamblin [Tue, 6 Aug 2019 19:16:59 +0000 (15:16 -0400)]
gzip: update ptest package dependencies
gzip-ptest skips the following tests on core-image-sato builds:
- zgrep-context
- zdiff
- zgrep-signal
The same tests pass on core-image-sato-sdk builds. This is due to
the use of busybox tool variants on core-image-sato (zgrep-context,
zdiff) and the absence of the perl and perl-ptest packages
(zgrep-signal). This patch adds the dependencies needed for all
three tests.
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jason Wessel [Mon, 5 Aug 2019 16:32:37 +0000 (09:32 -0700)]
pseudo: Fix openat() with a symlink pointing to a directory
While working with ostree disk generation in conjunction with wic, I
found a problem with pseudo where it tried to resolve a symlink when
it shouldn't, based on openat() flags. A C program has been
constructed to test pseudo to show that it is working properly with
the correct behavior around openat().
int target_dfd = openat (dfd, "tlink", O_RDONLY | O_NONBLOCK |
O_DIRECTORY | O_CLOEXEC | O_NOFOLLOW);
if (target_dfd == -1) {
printf("Test 1 good\n");
} else {
printf("Test 1 failed\n");
close(target_dfd);
}
target_dfd = openat (dfd, "tlink", O_RDONLY | O_NONBLOCK |
O_DIRECTORY | O_CLOEXEC);
if (target_dfd == -1) {
printf("Test 2 failed\n");
} else {
printf("Test 2 good\n");
close(target_dfd);
}
/* Test 3 make sure the owner of the link is root */
struct stat sbuf;
if (!lstat("tlink", &sbuf) && sbuf.st_uid == 0) {
printf("Test 3 good\n");
} else {
printf("Test 3 failed\n");
}
/* Test 4 tests open with the "rb" flag, owner should not change */
int ofd = openat(dfd,"./tlink", O_RDONLY|O_CLOEXEC);
if (ofd >= 0) {
if (fstat(ofd, &sbuf) != 0)
printf("ERROR in fstat test 4\n");
else if (sbuf.st_uid == 0)
printf("Test 4 good\n");
close(ofd);
} else {
printf("Test 4 failed with openat()\n");
}
/* Test pseudo db to see the fstat() above did not delete the DB entry */
if (!lstat("tlink", &sbuf) && sbuf.st_uid == 0)
printf("Test 5 good\n");
else
printf("Test 5 failed... tlink is owned by %i and not 0\n", sbuf.st_uid);
return 0;
}
Jason Wessel [Tue, 6 Aug 2019 21:16:08 +0000 (14:16 -0700)]
sqlite3: Fix zlib determinism problem
sqlite3-native in particular was finding zlib from the host if zlib-devel
was installed. This could lead to races where pseudo-native may or may not
fail to build.
We don't need/use compressed page support with sqlite so disable the dependency
(it doesn't have a configure option so use a autoconf cache variable).
The target binaries were not previously building with zlib, so we will
leave the default being zlib turned off, while the host binaries were
building with it "occasionally", but not for anything at runtime.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Errors:
qemu cannot bootup since:
Booting from ROM...
This kernel requires an x86-64 CPU, but only detected an i686 CPU.
Unable to boot - please use a kernel appropriate for your CPU.
QEMU: Terminated
For lib32 image, override has x86, so the qemubin set to qemu-system-i386,
fix by move QB_SYSTEM_NAME to corresponding conf, don't use the override
Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Sun, 4 Aug 2019 15:14:46 +0000 (08:14 -0700)]
glibc: Update to glibc 2.30
- Drop backported patches
- Move common pieces between cross-localedef and glibc into a common file
- Move latest checksums to glibc-common.inc and remove duplicates from glibc recipe
- Detailed release notes [1]
Khem Raj [Mon, 5 Aug 2019 19:34:29 +0000 (12:34 -0700)]
groff: Fix math.h inclusion from system headers issue
groff has system headers overrides in its sourcecode which it
generates as fallbacks but in some cases when a system header includes
math.h via include <> directive it lands in the override header and
causes compile issues, seen with clang+libc++, this patch makes sure
that right defines are available before including it
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 29 Jul 2019 16:28:04 +0000 (17:28 +0100)]
sstatesig: Updates to match bitbake siggen changes
Update the metadata to correspond to the bitbake siggen task specification
format change. This standardises on "<fn>:<task>" everywhere rather than
the "." delimiter that was being used in some places.
This is an API breaking change but means we now have a consistent format
being used throughout the codebase without compatibility APIs.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 23 Jul 2019 20:58:24 +0000 (21:58 +0100)]
sstatesig: Adpat to recent bitbake hash equiv runqueue changes
Upstream bitbake now hanes preserving the unihash data itself, drop
this usage of persist_data which was extremely problematic due to
concurrent task access issues, particulary on loaded systems.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
