Bruce Ashfield [Fri, 27 May 2016 14:32:21 +0000 (10:32 -0400)]
linux-yocto: create intel branches
To provide timely support for Intel platforms, without risking
issues with other platforms, we create intel branches from the
common variants.
i.e. We now have standard/intel, which is from standard/base
These branches will be managed like any other in the tree, and
will get common -stable, -rt, bugs and CVE updates.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 27 May 2016 14:32:20 +0000 (10:32 -0400)]
linux-yocto:4.4: broxton backports
Integrating the following mainline backports for better Broxton
support:
Adrian Hunter (3):
mmc: sdhci: Remove SDHCI_SDR104_NEEDS_TUNING
mmc: mmc: Attempt to flush cache before reset
mmc: mmc: Fix partition switch timeout for some eMMCs
Andy Shevchenko (12):
device property: always check for fwnode type
device property: rename helper functions
device property: refactor built-in properties support
device property: keep single value inplace
device property: improve readability of macros
device property: return -EINVAL when property isn't found in ACPI
device property: Fallback to secondary fwnode if primary misses the property
mfd: core: propagate device properties to sub devices drivers
mfd: intel-lpss: Pass HSUART configuration via properties
device property: avoid allocations of 0 length
lib/string: introduce match_string() helper
device property: convert to use match_string() helper
Bamvor Jian Zhang (1):
gpiolib: do not allow to insert an empty gpiochip
Christophe RICARD (2):
ACPI: Rename acpi_gsi_get_irq_type to acpi_dev_get_irq_type and export symbol
ACPI / gpio: Add irq_type when a GPIO is used as an interrupt
Dasaratharaman Chandramouli (1):
intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
Gwendal Grignou (1):
mmc: core: Do regular power cycle when lacking eMMC HW reset support
Heikki Krogerus (4):
device property: helper macros for property entry creation
device property: the secondary fwnode needs to depend on the primary
device property: fwnode->secondary may contain ERR_PTR(-ENODEV)
device property: fix for a case of use-after-free
Len Brown (2):
intel_idle: Add SKX support
intel_idle: add BXT support
Linus Walleij (1):
Revert "gpio: revert get() to non-errorprogating behaviour"
Mika Westerberg (7):
pwm: lpss: Remove ->free() callback
pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE
device property: Take a copy of the property set
driver core: platform: Add support for built-in device properties
mfd: intel-lpss: Add support for passing device properties
mfd: intel-lpss: Pass SDA hold time to I2C host controller driver
mfd: intel-lpss: Pass I2C configuration via properties on BXT
Qipeng Zha (1):
pinctrl: intel: make the high level interrupt working
Richard Cochran (10):
intel_idle: remove useless return from void function.
intel_idle: Fix a helper function's return value.
intel_idle: Remove redundant initialization calls.
intel_idle: Fix deallocation order on the driver exit path.
intel_idle: Fix dangling registration on error path.
intel_idle: Avoid a double free of the per-CPU data.
intel_idle: Setup the timer broadcast only on successful driver load.
intel_idle: Don't overreact to a cpuidle registration failure.
intel_idle: Propagate hot plug errors.
intel_idle: Clean up all registered devices on exit.
Wolfram Sang (1):
mmc: make MAN_BKOPS_EN message a debug
qipeng.zha (1):
pwm: lpss: Update PWM setting for Broxton
Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Fri, 27 May 2016 10:28:31 +0000 (07:28 -0300)]
ca-certificates: Add openssl as a runtime dependency
The update-ca-certificates script uses the c_rehash utility which is
installed by openssl. Add openssl as a runtime dependency to fulfill
the utility requirement.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ming Liu [Thu, 26 May 2016 21:14:33 +0000 (23:14 +0200)]
initscripts: check if swapon/swapoff exists before executing them
Not all built images contain swapon/swapoff, for instance, it is
configurable with or without them in busybox. So it'd better to check if
they exist or not before executing them.
Redirecting the potential errors to /dev/null is not good enough, which
might suppress the *real* errors.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
u-boot-nodtb.img doesn't exist so if UBOOT_SUFFIX = "img" is used
u-boot.img must be rebuilt by running make with
EXT_DTB=${DEPLOYDIR}/${UBOOT_DTB_IMAGE} then the resulting .img file must
be install to the deploy directories.
Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Mariano Lopez [Tue, 24 May 2016 12:44:16 +0000 (12:44 +0000)]
lib/oe/package_manager.py: Add pkgpath to dict returned by package_info
Having the package path with all the other package info allows to
reuse more code and have this information outside the package manager,
without additional processing.
[YOCTO #8536]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Mariano Lopez [Tue, 24 May 2016 12:44:14 +0000 (12:44 +0000)]
oetest.py: Add extract_packages() to RuntimeTestContext class
This new method extracts the content of package (RPM, DEB, or IPK)
to a directory inside of WORKDIR. The extraction is needed for later
install in the DUTs without using a package manager.
[YOCTO #8694]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jussi Kukkonen [Wed, 25 May 2016 06:40:26 +0000 (09:40 +0300)]
gnupg.org-hosted recipes: Change SRC_URI to https site
https version seems more reliable and in an informal test fetching
all gnupg recipes now takes <20% of the time it used to.
Define GNUPG_MIRROR in bitbake.conf so future tweaks to this are
easier. Replace some slower mirrors with the official ftp site
and another from gnupg.org mirror list.
Set UPSTREAM_CHECK_URI in all recipes that need it to
"https://gnupg.org/download/index.html" as the directory listings
are not up-to-date.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Gortmaker [Wed, 25 May 2016 14:10:08 +0000 (10:10 -0400)]
coreutils: revert upstream commit causing havoc with ls output
A recent commit causes ls to have the following behaviour:
meta-overc:~$ mkdir abc
meta-overc:~$ cd abc
meta-overc:~/abc$ touch aaaa bbbb 'filename with spaces'
meta-overc:~/abc$ ls
aaaa bbbb 'filename with spaces'
meta-overc:~/abc$
Note the appearance of quotation marks. This new behaviour was
introduced as "opt-out" and not "opt-in", and further, the opt-out
suggestion causes other breakage. More details can be found here:
Several large distros are reverting the change, for practical
considerations as per what can be seen above for Debian.
Here we do the same; I've marked the patch as upstream submitted
since there have been enough people vocally annoyed by this change
that it seems implausible that the coreutils team is unaware of it.
Hopefully this change here is just temporary and the coreutils team
will put the default back to the old way it was based on feedback
similar to what is recorded in the above Debian bug.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Dominic Sacré [Wed, 25 May 2016 11:13:44 +0000 (13:13 +0200)]
dropbear: Remove incorrect SFTPSERVER_PATH from CFLAGS
Openssh now installs the sftp-server binary as /usr/libexec/sftp-server,
whereas the dropbear recipe assumes a different path.
Dropbear uses the correct path by default, so it's no longer necessary
to override SFTPSERVER_PATH via CFLAGS.
This fixes SFTP access to systems using dropbear as the SSH server.
Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jussi Kukkonen [Wed, 25 May 2016 10:10:39 +0000 (13:10 +0300)]
docbook-xsl-stylesheets: Upgrade 1.78.1 -> 1.79.1
* Use $PV at appropriate places in do_install
* Install some new files, avoid installing 25M of java archives
* License checksum change is just copyright years changing
* Fix the URI delegation file (that prevents fetches from
http://docbook.sourceforge.net/ during build) to refer to a
non-versioned directory
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
This dependency was floating, which results in non-deterministic builds. Add
a configure argument and associated PACKAGECONFIG to fix this.
The libxml dep is only needed when bind was built with a dep on libxml due to
its httpstats feature. So, when you enable the httpstats config in bind, and
want to build dhcp, be sure to also enable the bind-httpstats config in dhcp.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Marek Vasut [Tue, 24 May 2016 13:06:48 +0000 (15:06 +0200)]
gcc: Backport nios2 gcc ICE fix
Backport a patch from mainline gcc 5 branch to fix ICE triggered
when cross-compiling libdrm for nios2 architecture. The same ICE
is fixed in gcc6 already.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Brendan Le Foll [Tue, 24 May 2016 11:12:16 +0000 (12:12 +0100)]
npm: add target_arch flag to npm
npm takes a target_arch flag which needs to be set to do some gyp compilations
correctly. It also doesn't use the same mapping as OE for target arch so a
small function is required to make the mapping work. Function is taken from
meta-nodejs
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Bruce Ashfield [Tue, 24 May 2016 15:53:59 +0000 (11:53 -0400)]
linux-yocto/4.4: beaglebone: build in the usb controller drivers
Merging the following meta data change:
[
In the current codes, we build the drivers for usb controller as
modules. But for some image types, such as minimal or
full-cmdline, these driver modules are not installed to the rootfs by
default. This makes the using of the usb pretty inconvenience. So
make them all builtin.
Reported-and-suggested-by: hiims <h@101.org.il> Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes a couple issues introduced by the previous patch. There were
a couple spots where HOST_CFLAGS needed changing to CFLAGS. This fixes builds
with security_flags.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Mon, 23 May 2016 20:45:27 +0000 (17:45 -0300)]
openssl: Ensure SSL certificates are stored on sysconfdir
Debian and other generic distributions has moved the certificates for
sysconfdir (/etc/ssl) and made the libdir content to link for it.
This provides several advantages specially for read-only
rootfs. Another benefit is that it ensures foreign implementations
(e.g: BoringSSL, from Chromium, when running with OpenSSL backend for
the certificates) to find the content correctly.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Randy Witt [Mon, 23 May 2016 21:57:00 +0000 (14:57 -0700)]
sstate.bbclass: Don't create symlinks, download to the correct location
Previously the sstate was all downloaded to the same directory and then
symlinks were added in the directories that pointed to the siginfo and
sstate in the parent directory.
This change makes it so that now the files are just downloaded to the
correct location without the need for symlinks.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Tue, 24 May 2016 04:18:51 +0000 (16:18 +1200)]
devtool: upgrade: tweak conflict handling
Make a couple of changes to the rebase operation:
1) Only wrap the actual rebase command in try...except since a failure
in any of the other commands should be an error, not a warning
2) If it's a conflict (which unfortunately we can only tell by checking
for the keyword "conflict" since git doesn't return error codes based
on the type of error) then print a message clarifying that the user
needs to resolve the issue themselves to finish the upgrade.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Tue, 24 May 2016 04:18:50 +0000 (16:18 +1200)]
devtool: upgrade: handle upgrading recipes with a versioned inc file
The gdb recipe in OE-Core has an inc file with the version in it;
since the inc file is pulled in with a "require ${PV}.inc", when
upgrading the recipe we need to also rename the inc file it will fail to
parse and the upgrade itself will fail.
Fixes [YOCTO #9574].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 23 May 2016 09:32:23 +0000 (10:32 +0100)]
useradd: Fix infinite build loop
http://git.openembedded.org/openembedded-core-contrib/commit/?id=642c6cf0b6a0371de476513162bd0cefa9c438b3
introduces a problem if the USERADD_PARAM variable has trailing
whitespace as the code infinitely loops causing build hangs.
Add a similar sed expression to $remaining to avoid this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Fri, 29 Apr 2016 17:46:09 +0000 (19:46 +0200)]
linux-yocto-rt, core-image-rt*: Explicitly skip when PREFERRED_PROVIDER_virtual/kernel isn't set to linux-yocto-rt
* just like linux-yocto-dev is doing
* fixes following errors in world builds:
ERROR: Nothing PROVIDES 'linux-yocto-rt' (but /home/jenkins/oe/world/shr-core/openembedded-core/meta/recipes-rt/images/core-image-rt-sdk.bb DEPENDS on or otherwise requires it)
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: Required build target 'core-image-rt-sdk' has no buildable providers.
Missing or unbuildable dependency chain was: ['core-image-rt-sdk', 'linux-yocto-rt']
ERROR: Nothing PROVIDES 'linux-yocto-rt' (but /home/jenkins/oe/world/shr-core/openembedded-core/meta/recipes-rt/images/core-image-rt.bb DEPENDS on or otherwise requires it)
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: Required build target 'core-image-rt' has no buildable providers.
Missing or unbuildable dependency chain was: ['core-image-rt', 'linux-yocto-rt']
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Patrick Ohly [Wed, 18 May 2016 16:24:16 +0000 (19:24 +0300)]
image.bbclass: additional output in create_symlinks
When a symlink does not get created, it is useful for debugging to log
what would have been created and why it was skipped.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ed Bartosh <eduard.bartosh@intel.com> Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Patrick Ohly [Wed, 18 May 2016 16:24:14 +0000 (19:24 +0300)]
image.bbclass: support duplicate compression types
When a derived distro adds a certain type, say zip, to
COMPRESSIONTYPES and later OE-core does the same, we end up with the
type being listed twice, and that would have undesired effects
(commands generated twice).
So to support such loosely coupled extension, we de-duplicated the
list of types first.
Alternatively, such a situation could also be treated as error. But that
seems unnecessary because typically commands for the same type will also
do the same thing.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ed Bartosh <eduard.bartosh@intel.com> Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Dai Caiyun [Sat, 27 Feb 2016 23:05:53 +0000 (02:05 +0300)]
coreutils: Fix rootfs creation errors
1) error: file /usr/share/man/man1/su.1 from install of shadow-doc-4.2.1
conflicts with file from package coreutils-doc-6.9-r5
2) error: file /usr/share/man/man1/hostname.1 from install of net-tools-doc
conflicts with file from package coreutils-doc-6.9-r5
3) error: file /usr/share/man/man1/hostname.1 from install of net-tools-doc
conflicts with file from package coreutils-doc-8.25
Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Dai Caiyun [Sat, 27 Feb 2016 23:03:45 +0000 (02:03 +0300)]
net-tools: Fix rootfs creation errors
1) error: file /usr/share/man/man1/hostname.1 from install of net-tools-doc
conflicts with file from package coreutils-doc-6.9-r5
2) error: file /usr/share/man/man1/hostname.1 from install of net-tools-doc
conflicts with file from package coreutils-doc-8.25
Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
ghostscript: Update URL_SRI considered as 'old release'
The Ghostcript project started to place their tarballs in two places
starting at 9.19 as explained in [1]. 9.18 version is considered old,
so including the 'old-gs-releases' in the URL.
[1] http://downloads.ghostscript.com/public/
[YOCTO #9573]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Roy Li [Tue, 10 May 2016 02:09:33 +0000 (10:09 +0800)]
systemd: re-enable mount propagation for udevd
With MountFlags=slave, those mounts then become private to the systemd-udevd
namespace and are no longer accessible from outside the namespace, which is
not expected
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Sat, 21 May 2016 11:30:11 +0000 (12:30 +0100)]
bitbake.conf/toolchain-shar-extract: Use en_US.UTF-8 as locale
Under python 3, if we spawn python processes, we need to have a UTF-8 locale,
else python's file access methods will use ascii. You can't change that mode
once the interpreter is started so we have to ensure a locale is set. Ideally
we'd use C.UTF-8 since OE already forces the C locale but not all distros support
that and we need to set something so en_US.UTF-8 seems as standard we we can get.
Also set this into the environment used when installing SDKs since
python can be run and we need to ensure we use a standardised locale
which is available from things like buildtools-tarball.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Fri, 20 May 2016 10:21:18 +0000 (22:21 +1200)]
devtool: sdk-update: drop support for local updates
Having two code paths here makes maintenance difficult, and it doesn't
seem likely that you would use the local case in real usage anyway, so
drop the local support entirely.
This should allow us to resolve [YOCTO #9301].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 21 May 2016 10:55:36 +0000 (11:55 +0100)]
nativesdk-glibc: Extend relocation support to locales
Currently locales are not found in a relocated buildtools-tarball
such as that used in eSDK. This breaks bitbake when used under python3.
This patch adds enough relocation magic to nativesdk-glibc so that
the binary locales can be found even in a relocated buildtools-tarball
and bitbake works successfully under python3. The eSDK also works
correctly after this change too.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
