Marko Lindqvist [Mon, 11 Feb 2013 04:02:02 +0000 (06:02 +0200)]
diffutils: replace obsolete automake macros with working ones
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Removed AM_PROG_CC_STDC. AC_PROG_CC to replace it was already
present.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Mon, 11 Feb 2013 04:01:36 +0000 (06:01 +0200)]
systemtap: replace obsolete automake macros with working ones
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Removed AM_PROG_CC_STDC. AC_PROG_CC to replace it was already
present.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Mon, 11 Feb 2013 04:01:10 +0000 (06:01 +0200)]
libidn: remove help2man dependency
Remove manpage creation. It wasn't working because of help2man
missing when libidn is being built. This attempt to create
manpages without help2man turns from no-op to hard error with
automake-1.13.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Mon, 11 Feb 2013 04:00:48 +0000 (06:00 +0200)]
texinfo: remove help2man dependency
Remove manpage creation. It wasn't working because of help2man
missing when texinfo is being built. This attempt to create
manpages without help2man turns from no-op to hard error with
automake-1.13.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Apt does not recognize the architecture if a different one is set with
DPKG_ARCH (e.g. armel). This patch writes the correct architecture to
/etc/apt/apt.conf.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@netmodule.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Jason Wessel [Tue, 12 Feb 2013 11:08:23 +0000 (05:08 -0600)]
relocate_sdk.py: allow relocate_sdk.py to work with python 2.4.x
Avoid the chicken / egg problem of an SDK that provides a working
python but requires that version of python to extract itself. The
RHEL 5.x systems and some other enterprise Linux systems ship with
python 2.4.x as the default python. We need to at least be able to
extract work executables even if we never use the the host provided
python again.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jason Wessel [Tue, 12 Feb 2013 11:08:22 +0000 (05:08 -0600)]
populate_sdk_base.bbclass: Improve debugging capabilities for SDK installer
After having to debug the SDK installer a few times in
addition to the relocation code the following patch was created
to improve the capabilities around debugging the SDK installer.
1) Add a verbose mode -D which set a set -x to see what
the SDK installer is doing.
2) Add a mode -S to save the relocation scripts for the purpose
of debugging them in conjunction with -D
3) Add a mode -R to not execute the relocation scripts for the
purpose of debugging the relocations.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jason Wessel [Tue, 12 Feb 2013 11:08:21 +0000 (05:08 -0600)]
relocate_sdk.py: Fix corruption of sdk binaries
There are two cases of corruption that the relocate_sdk.py was not correctly
dealing with.
1) SDK Extras should be left alone
Extra external binaries included in an SDK that were linked against the
host's version of /usr/lib/ld-so.so should not get a relocation applied.
In the case that was discovered these were LSB compliant binaries that
already worked on many hosts.
2) If the interp section is too small generate an error
In the case of the qemu user code, it was using its own .ld file
to link the executables which overrides the default in the nativesdk
binutils. This generated host executables which had a interp section
that was too small to relocate.
Now the relocate_sdk.py will print an error and continue on such that
the error can be fixed by a developer without having to do the
difficult task of debugging why it is crashing or not loading correctly.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Fri, 8 Feb 2013 22:27:25 +0000 (14:27 -0800)]
oe-git-proxy: Use socat instead of BSD nc
BSD nc was commonly available on the current distros until Fedora 18
appears to have dropped it. socat appears to be a reasonable replacement
with availability on Fedora and Ubuntu and going back some time as well.
Update the script to use the socat syntax.
Simplify the logic a bit by using exec for the no-proxy-needed cases.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Fri, 8 Feb 2013 22:27:22 +0000 (14:27 -0800)]
oe-git-proxy: Add a new comprehensive git proxy script
oe-git-proxy.sh is a simple tool to be used via GIT_PROXY_COMMAND. It
uses BSD netcat to make SOCKS5 or HTTPS proxy connections. It uses
ALL_PROXY to determine the proxy server, protocol, and port. It uses
NO_PROXY to skip using the proxy for a comma delimited list of hosts,
host globs (*.example.com), IPs, or CIDR masks (192.168.1.0/24). It is
known to work with both bash and dash shells.
V2: Implement recommendations by Enrico Scholz:
o Use exec for the nc calls
o Use "$@" instead of $* to avoid quoting issues inherent with $*
o Use bash explicitly and simplify some of the string manipulations
Also:
o Drop the .sh in the name per Otavio Salvador
o Remove a stray debug statement
V3: Implement recommendations by Otavio Salvador
o GPL license blurb
o Fix minor typo in comment block
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Cc: Otavio Salvador <otavio@ossystems.com.br>
git-proxy cleanup
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Fri, 8 Feb 2013 22:27:20 +0000 (14:27 -0800)]
oe-buildenv-internal: Add upper and lower case proxy vars to BB_ENV_EXTRAWHITE
Applications are inconsistent in their use of upper and lower case proxy
variables. Curl, for example, specifies NO_PROXY (not no_proxy) in the
man page (changed in 2009 [1]). Avoid proxy issues by ensuring both the
upper and lower case versions of each proxy variable are available in
the environment for the fetcher commands.
Add FTPS_PROXY and ftps_proxy to the list as well.
GIT_CONFIG only affects the git-config command which is not relevant to
the fetcher. This was previously used with the OE GIT_CORE_CONFIG
variable which would provide a basic git config to use instead of the
user's config. This usage was deprecated by git for over a year now:
GIT_PROXY_HOST and GIT_PROXY_PORT are not used by git.
GIT_PROXY_IGNORE was an OE construct used to create the custom git
config and had no meaning outside of the OE environment. It is not used
by git.
Remove these variables from the fetcher environment.
Users wishing to configure git to work with a proxy should define the
GIT_PROXY_COMMAND environment variable to use an external script.
NO_PROXY can be used within this script to skip the proxy for certain
hosts.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 11 Feb 2013 15:56:52 +0000 (15:56 +0000)]
qt4: use system SQLite
We've always been depending on external SQLite, however by default Qt
builds using its own internal copy of SQLite. Add the configure option
to actually use the external SQLite library and make it clearer which
version is in use.
Fixes [YOCTO #2514].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enrico Scholz [Mon, 11 Feb 2013 19:21:53 +0000 (20:21 +0100)]
package.bbclass: support dangling path components
Commit ec2aab09769f4b6817d74d2175afa2b7c7598750 introduced a regression
on packages which contain symlinks with unresolvable path components
(e.g. lsof-dbg). While assigning a variable, an exception was raised
and the exception handler accessed this variable.
Patch deals both with the dangling path components by assuming them as
valid directories and by avoiding the broken assignment.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enrico Scholz [Sun, 10 Feb 2013 12:41:47 +0000 (13:41 +0100)]
package.bbclass: use oe.path.realpath()
oe.path.realpath() provides are common and more correct implementation
for resolving symlinks within sysroot. Use it.
Old implementation suffered from lot of problems; e.g.
* redundant code
* calls 'os.stat()' which references files on host; this can give wrong
results about existing/non-existing and can cause EPERM (instead of
the catched ENONENT) exceptions
* does not deal with special cases like '..' leaving the sysroot.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jason Wessel [Sat, 9 Feb 2013 22:06:57 +0000 (16:06 -0600)]
ncurses.inc: Fix display corruption and add fallback for sstate compiled paths
CQID: WIND00402979
Display corruption was occurring on 64 bit hosts using menuconfig for
the kernel and busybox with the ncurses-native or ncurses-nativesdk
because the configure arguments were not sufficient vs the expected
use from the upstream source.
Also changed in this commit is to provide a fallback to the hard
compiled paths for the terminfo and termcap. Eventually this needs to
be fixed another way if we want a truly portable SDK because any SDK
that is relocated or native binaries pulled out of the sstate can end
up referencing terminfo files that no longer are in the same location.
Because the host system has terminfo files that ncurses will happily
use we might as well have a fall back to buy some time for a better
fix, vs having thing just not work occasionally when using sstate.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Radu Moisan [Fri, 8 Feb 2013 22:43:19 +0000 (22:43 +0000)]
wpa-supplicant: Enabling with systemd
Signed-off-by: Radu Moisan <radu.moisan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Radu Moisan [Fri, 8 Feb 2013 22:43:17 +0000 (22:43 +0000)]
connman: Enabling with systemd
Signed-off-by: Radu Moisan <radu.moisan@intel.com> Signed-off-by: Sander van Grieken <sander@outrightsolutions.nl> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Fri, 8 Feb 2013 22:43:16 +0000 (22:43 +0000)]
update-rc.d: don't do anything if systemd.bbclass is inherited
We need the update-rc.d class to work when systemd is being used so that
packages that only have SysV init scripts still work. However if a recipe
supports both we don't want to install SysV and systemd files under systemd.
To solve this, before doing real work in update-rc.d check if the systemd class
has been inherited and don't do anything if it has.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Radu Moisan [Fri, 8 Feb 2013 22:43:18 +0000 (22:43 +0000)]
avahi: Enabling with systemd
Signed-off-by: Radu Moisan <radu.moisan@intel.com> Signed-off-by: Sander van Grieken <sander@outrightsolutions.nl> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Fri, 8 Feb 2013 22:43:15 +0000 (22:43 +0000)]
systemd.bbclass: helper class for recipes with systemd units
This class adds postinst/prerm scripts to start/stop/enable/disable the services
as relevant, and some magic to ensure the service files are installed.
Based on (but not the same as) the systemd.bbclass in meta-systemd, so thanks to
the following for their work there:
Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Khem Raj <raj.khem@gmail.com>
Martin Jansa <Martin.Jansa@gmail.com>
Andreas Müller <schnitzeltony@googlemail.com>
Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Fri, 8 Feb 2013 09:18:20 +0000 (09:18 +0000)]
buildhistory: record more R* variables
Add RPROVIDES, RREPLACES, RCONFLICTS and RSUGGESTS to the list of
tracked variables. Of these, RPROVIDES is always output, whereas the
others are only output if they have a value (since it is more common
that they don't).
Implements [YOCTO #3391].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Fri, 8 Feb 2013 09:18:21 +0000 (09:18 +0000)]
buildhistory_analysis: handle more R* variables
Report changes to RPROVIDES, RREPLACES, and RCONFLICTS. As RSUGGESTS
isn't widely used and isn't of huge concern if it changes, it is not
reported by default.
Implements [YOCTO #3391].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Colin Walters [Fri, 8 Feb 2013 12:48:52 +0000 (07:48 -0500)]
make-3.82: Add patch from git to fix parallel make race
See: http://savannah.gnu.org/bugs/?30653
This only shows up for projects which have a number of intermediate
targets. For me, systemd fails to build without this patch, and does
build consistently with it.
WebKitGtk+ is another known affected project.
Signed-off-by: Colin Walters <walters@verbum.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andrei Gherzan [Sat, 9 Feb 2013 22:09:56 +0000 (00:09 +0200)]
udev: Cleanup .inc file
* udev-acl and udev-concolekit have no files so remove these packages
* there's nothing in sbindir so remove useless sbindir = "${base_sbindir}"
* there is no udevinfo or udevtest so remove these from udev-utils
* udevadm is installed in bindir so modify it's path in FILES_udev-utils
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 7 Feb 2013 23:53:51 +0000 (23:53 +0000)]
dbus-native: Don't install dbus-launch
dbus-launch from dbus-native has no X support so lets not install it in
case the host has a more featured and useful version. It can interfere
with running X utils with STAGING_BINDIR_NATIVE is in PATH and we don'
use it anywhere.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Xin Ouyang [Sat, 26 Jan 2013 05:28:30 +0000 (13:28 +0800)]
libcgroup: fix failure for absolute path
[ CQID: WIND00401091 ]
While using sstate or some other conditions, there may be no image
directory in the builddir, so the absolute path of libcgroup.so.1
will cause build failures.
Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Jim Somerville [Mon, 21 Jan 2013 16:13:31 +0000 (11:13 -0500)]
rt-tests: fix cyclictest reported 1 sec latencies
[ CQID: WIND00391769 ]
Huge latencies reported close to 1 second when certain options
are used in cyclictest.
Extend the original commit to remove the 1 second hardcoded
timer values from the RELTIME and ITIMER options. Use the
the actual interval instead.
Signed-off-by: Jim Somerville <Jim.Somerville@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Jason Wessel [Thu, 10 Jan 2013 18:55:11 +0000 (12:55 -0600)]
eglibc-nativesdk: Fix buffer overrun with a relocated SDK
When ld-linux-*.so.2 is relocated to a path that is longer than the
original fixed location, the dynamic loader will crash in open_path
because it implicitly assumes that max_dirnamelen is a fixed size that
never changes.
The allocated buffer will not be large enough to contain the directory
path string which is larger than the fixed location provided at build
time.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Jesse Zhang [Sun, 6 Jan 2013 01:56:19 +0000 (09:56 +0800)]
ghostscript: fix endianness detection
[ CQID: WIND00394747 ]
The original patch removes endianness detection completely, causing lcms
to be built against the wrong endian. Instead, pass the correct endian
through the recipe using SITEINFO_ENDIANNESS.
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Martin Jansa [Thu, 7 Feb 2013 14:01:31 +0000 (15:01 +0100)]
qemu: disable smartcard support
* sometimes it's autodetected and fails to build:
| /usr/bin/ld: libcacard/.libs/cac.o: Relocations in generic ELF (EM:40)
| libcacard/.libs/cac.o: could not read symbols: File in wrong format
| collect2: ld returned 1 exit status
| make[1]: *** [libcacard.la] Error 1
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Peter Seebach [Tue, 5 Feb 2013 20:21:42 +0000 (14:21 -0600)]
pseudo.inc: Fix sqlite libdir again, pseudo 1.4.3
This updates to pseudo 1.4.3. Changes:
1. A couple of minor tweaks to reduce difficulties using SDKs built
on slightly more recent machines on older machines; specifically,
avoiding getting @GLIBC_2.7 symbol references for sscanf(), fscanf(),
and open2().
2. Revision of the logic determining the library directory to use for
sqlite's library files.
The latter is a source of difficulty because it's come up a few times
that we may want pseudo to use lib64 for libpseudo.so, but bitbake's
usual setup would have libsqlite3.a in lib regardless of bit width.
Cleaned up previous design a bit by providing a distinct setting for
sqlite-lib, which defaults to the same library directory used for other
things. Adjusted build to use this new setting. (This ends up being
${baselib}; on targets, that might not be lib, but for native builds
it generally is, and for SDK builds it appears to do the right thing.)
Testing: Successful build of meta-toolchain for both 64-bit and 32-bit
SDKMACHINE, and builds with NO32LIBS = "0" also succeeded. Also builds
for multilib targets.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Richard Purdie [Thu, 7 Feb 2013 13:32:55 +0000 (13:32 +0000)]
image.bbclass: Add MLPREFIX to DEPENDS
Add MLPREFIX to DEPENDS to ensure the correct qemuwrapper is dependended upon. Its searched
for in PATH so we need to do this to ensure the correct version is present.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 7 Feb 2013 12:40:35 +0000 (12:40 +0000)]
qemuwrapper: Don't use STAGING_BINDIR_CROSS directly
We need the files to be tracked by sstate so we need to jump through
some hoops to ensure this happens. The cross bindir directory
isn't staged automatically so we need to handle this outselves.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 6 Feb 2013 23:34:52 +0000 (23:34 +0000)]
bitbake.conf: Update hashconfig after BB_ORIGENV changes
We should ignore BB_ORIGENV from the hash for the config data. There
are also a number of variables which no longer make it into the data
store so we can drop these from the hash whitelist.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Wed, 6 Feb 2013 00:56:14 +0000 (01:56 +0100)]
package.bbclass: return list of packages created in do_split_packages
* sometimes it's useful to do something with packages created
by do_split_packages later in do_package_prepend, e.g. in:
http://lists.linuxtogo.org/pipermail/openembedded-devel/2013-February/043824.html
I have .bbclass which adds some postinst, postrm and RDEPENDS,
but ttf-mplus is using do_split_packages to create those packages
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 3 Feb 2013 17:31:30 +0000 (17:31 +0000)]
package.bbclass: Add PACKAGESPLITFUNCS variable
Prepending to populate_packages is rather ugly and means its hard to trace
errors and also profiling informaiton is summed together in one function.
This patch starts to split out the prepends to become separate functions
to avoid these issues. This is generally a neater way to write functions
than prepending to where there can sometimes be variable scope issues
and we've been bitten by whitespace issues in the past.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 3 Feb 2013 17:25:30 +0000 (17:25 +0000)]
package.bbclass: Various minor performance tweaks
* Call getVar outside the loop
* Drop unneeded PATH export (bitbake does this already)
* Drop unused variable
* Simplify if statement nesting
* Simplify variable expandion to a getVar call (expand would just call getVar)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 3 Feb 2013 17:21:40 +0000 (17:21 +0000)]
package.bbclass: Make use of cleandirs and dirs function flags
We can use the cleandirs and dirs flags for the fuctions to handle
directory cleaning and creation at the bitbake level rather than
using these calls within the functions
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 3 Feb 2013 17:17:30 +0000 (17:17 +0000)]
kernel.bbclass: Improve populate_packages_prepend
Small performance tweaks for populate_packages_prepend:
* Compile the regexps once at the start
* Don't keep importing a module which is already imported
* No need to check PKG is set, we'd have failed long before now if it wasn't
* Don't export PATH, bitbake takes care of this at the task level
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 3 Feb 2013 17:11:58 +0000 (17:11 +0000)]
package.bbclass: Rewrite split_and_strip_files
The split_and_strip_files funciton was hard to follow and its usage of prefixes
to strings was unusual. This rewrites it to use a list of hardlinks, symlinks and
elffiles where each list is iterated over at the correct point.
This means we can avoid creating dandling symlinks for example so we can simply
delete the cleanup code for this.
The isfile() check is also removed which gives a significant improvement in speed.
Its uneeded since os.walk will have already checked things in files are files.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 3 Feb 2013 16:54:00 +0000 (16:54 +0000)]
insane.bbclass: Add pkgvarcheck to check for suboptimal usages of variables
Check through the variables:
'RDEPENDS', 'RRECOMMENDS', 'FILES', 'pkg_preinst', 'pkg_postinst', 'pkg_prerm', 'pkg_postrm'
and if there is a variable set which isn't package specific, inform the user
of this.
Using these variables without a package suffix is bad practise and complicates
dependencies of packages unnecessarily as well as complicates the code. Lets
convert the remaining issues and then we can take the small performance gain.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
