Richard Purdie [Wed, 26 Sep 2012 13:32:13 +0000 (14:32 +0100)]
sstate: Remove master manifest usage
This was added to allow detection of duplicate files being installed by sstate.
There is a much simpler way, just check if the file already exists. This
effectively uses the kernel VFS as the cache which is much more efficient.
This resolves a significant performance bottleneck (lock contention on a
single file) when running builds that are just being generated from sstate
cache files.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 26 Sep 2012 11:56:58 +0000 (12:56 +0100)]
packagedata/multilib: Fix search patch for multilib builds
The current multilib search path code for packagedata is flawed since it
doesn't correctly handle changes in the TARGET_VENDOR/TARGET_OS that
multilib may make. This patch enhances the code to correctly build the
search paths so multilib packagedata is found correctly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 26 Sep 2012 11:45:17 +0000 (12:45 +0100)]
sstate: Fix SSTATE_DUPWHITELIST variable usage
We need to split this variable before using it. Otherwise a single "/"
character in the list whitelists every overlapping sysroot file which
was not the intention making the whole thing useless.
We'll start seeing warnings about overlapping files now this is working
correctly after this patch.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Mon, 24 Sep 2012 20:25:46 +0000 (16:25 -0400)]
linux-yocto/3.4: update beagleboard configs
Updating to pickup a couple of configuration tweaks that were done
as part of a bump to the 3.4 linux-yocto tree for the beagleboard.
In particular, this updates DVI and USB settings to enable the
perhipherals out of the box.
Signed-off-by: Liang Li <liang.li@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids the hardcoding of ${libdir}/locale which is all over the place,
and will facilitate use of ${exec_prefix}/lib/locale instead of
${libdir}/locale.
This doesn't actually change any output at this time. Verified this with
buildhistory against the packages produced from core-image-base.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc-common.inc: Consider multilib when renaming libgcc for debian'ness
When doing multilib builds rpm does not find libgcc1 for lib32
multilib because its not honoring the debian renaming scheme for
libgcc-multilib. Lets add MLPREFIX to fix it.
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This solves a problem when installing rpm using the ipk pkg-management
system where /var/cache was conflicting with the existing /var/cache from
base-files.
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jason Wessel [Mon, 17 Sep 2012 22:43:51 +0000 (17:43 -0500)]
terminal: Send LogExecTTY event to spawn screen
Bitbake has the ability to request to run a command
and if it is not possible fall back to emitting a
log message. This can be used to start a screen
client automatically on the controling tty if
the UI has an interactive tty.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
binutils-2.22: Disable recent gold backports from 2.22 branch
This patch has been causing some regressions on gold.
e.g. systemd based images segfault and uclibc based images
dont boot. There has been few other reports on the mailing
list. Considering this lets withdraw this patch.
Phil Blundell [Fri, 21 Sep 2012 19:42:38 +0000 (20:42 +0100)]
rootfs_ipk: Avoid leaving run-postinsts around if online package management is disabled
If all postinsts have already been run during rootfs construction then
there's no point in having run-postinsts in the installed system.
Clean it up at the same time that update-rc.d and suchlike are being
removed.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Garman [Fri, 21 Sep 2012 22:06:02 +0000 (15:06 -0700)]
runqemu: work with tap device names that end with a colon
On Fedora systems (and likely others), ifconfig returns interface
names that end with a colon. Make sure we strip the colon off the
tap device name before using it.
This fixes [YOCTO #3028]
Signed-off-by: Scott Garman <scott.a.garman@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Sat, 22 Sep 2012 12:29:57 +0000 (13:29 +0100)]
classes/multilib: prevent multilib extension of nativesdk recipes
It isn't supported to mix multilib and nativesdk in the same target, so
explicitly skip multilib processing if nativesdk is inherited. As a
bonus this fixes a bunch of related "missing file" warnings from the
file checksum code during parsing because BPN was not correctly stripped
for these targets.
Second half of the fix for [YOCTO #3146].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Sat, 22 Sep 2012 12:29:56 +0000 (13:29 +0100)]
classes/multilib: ensure MLPREFIX is set for image recipes
We need MLPREFIX to be set so that oe.utils.prune_suffix() (as used for
the value of BPN) can derive the bare name from the multilib-extended
name for image recipes. BPN being set correctly avoids missing file
warnings during parse from the file checksum code for (unusual) images
that set SRC_URI, such as build-appliance-image.
First half of the fix for [YOCTO #3146].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Phil Blundell [Sat, 22 Sep 2012 18:37:04 +0000 (19:37 +0100)]
pulseaudio: Ensure openssl is disabled
We don't DEPEND on openssl but configure will try to use it if
pkg-config thinks it might be installed. This can lead to failing
and/or nondeterministic builds, so let's force it off.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Phil Blundell [Sat, 22 Sep 2012 16:18:08 +0000 (17:18 +0100)]
autotools: Remove special handling for autoconf* and automake*
For reasons that are now shrouded in obscurity, autotools.bbclass
has long contained a special heuristic to avoid attempting to run
autoreconf when building autoconf or automake themselves. However,
the wildcard test against PN which is used there is problematic when
trying to build another package whose name happens to start with
"autoconf", and in any case it is silly to do this test at runtime
for every package. The individual recipes for autoconf and automake
can just as easily suppress the behaviour that they don't want by
providing a custom do_configure() method which just runs configure.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have been adding this option to paper over a bug in old toolchain
http://hardwarebug.org/2008/11/28/codesourcery-fails-again/
e.g. is one but these have been weeded out. Therefore let gcc
take the default vectorization optimizations
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Mon, 24 Sep 2012 03:06:58 +0000 (23:06 -0400)]
linux-yocto/3.4: Update fri2 and sys940x to emgd-1.14
Bumping the meta SRCREV to pickup a newer emgd for the fri2 and
sys940x.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Phil Blundell [Mon, 24 Sep 2012 06:24:51 +0000 (07:24 +0100)]
util-linux: Ensure that ${sbindir} is respected
The configure script uses a hard-coded value for ${usrsbin_execdir},
which is the path that we know as ${sbindir}. Adjust configure to take
this from the environment if it's set there, and have do_configure()
pass it in.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Ertsaas [Wed, 19 Sep 2012 07:16:55 +0000 (09:16 +0200)]
bash: Make it possible to run bash 3.2.48 instead of 4.2.
bash-3.2.48 did not provide the linking from sh to bash, making it unusable.
Moving the license part out of the bash.inc file, and into bash_4.2.bb file makes
us able to use that file also for bash_3.2.48.bb, which makes maintaining both
at the same time a lot easier.
Signed-off-by: Martin Ertsaas <mertsas@cisco.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The globs used for STAMPCLEAN were too greedy matching gcc-cross-initial
stamps for gcc-cross for example. This patch resolves that problem making
the assumption that PV starts with something numeric. This assumption
should hold in most cases and has a better failure case that the current
situation.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 21 Sep 2012 10:16:24 +0000 (11:16 +0100)]
insane.bbclass: Improve ability to detect enabled tests
Define an ALL_QA variable which can be used to determine which tests to
run. Improve the libdir test to work in the case it is set to raise an
error rather than a warning.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Radu Moisan [Wed, 19 Sep 2012 09:32:39 +0000 (12:32 +0300)]
insane.bbclass: add library dir sanity check
Check in ${PKGD} for libraries in wrong locations.
Trigger a warning if so.
Eg. Catch recipe installing /lib/bar.so when ${base_libdir}="lib32"
or installing in /usr/lib64 when ${libdir}="/usr/lib"
[Yocto #2038]
Signed-off-by: Radu Moisan <radu.moisan@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
SDK: allow toolchain installation from another directory
This patch will allow one to run the installer from another directory
than the one where it's actually located.
Suppose the installer is in /home/user/test/my/sdk and the current
directory is in a different place. With this patch, one can run the
installer like this:
$ sh ~/test/my/sdk/poky-eglibc-x86_64-arm-toolchain-gmae-1.2+snapshot-20120920.sh
The directory usr/libexec/ in the SDK sysroot contains the default
symlinks to the toolchain binaries and these, too, need to point to the
correct toolchain path.
adt-installer: ensure directory exists before copying/removing
If the installation is done in a directory which already contains a
valid installation, opkg will not install anything and the moving the
contents of /install/dir/opt/poky/1.2 (for example) to /install/dir will
throw some errors. However, the install directory will not be affected.
This patch will ensure that the /install/dir/opt/poky/1.2 exists.
The SDK installation scripts should not canonicalize symlinked
directories because the entire relocation would be done to the directory
to which the symlink points. Instead, if the installation is a symlink,
use that path to relocate the binaries.
For example, if we have the following symlink: /opt/sdk -> ~/my/test/sdk
the binaries will be relocated to /opt/sdk not ~/my/test/sdk as it is
done now.
When the cross canadian toolchains are installed, for different
architectures, they might contain common files. This leads to
installation failures since the opkg, by default, does not overwrite
files. This issue happens, for example, for binutils packages (that
contain the same locale files) or gdb (which installs some syscalls xml
files). The locale files could be removed from the binutils
cross-canadian package but we cannot do the same for the syscalls GDB
files which are used by GDB to display user friendly names for the
syscall numbers. Hence, the best solution is to force opkg to overwrite
these files.
Constantin Musca [Wed, 19 Sep 2012 09:59:14 +0000 (12:59 +0300)]
intltool: include intltool.m4 and add missing rdepends
- include /usr/share/aclocal/intltool.m4 into the intltool
package (the files from intltool-dev must be included into the
main package, as intltool is a development tool)
- add missing rdepends: gettext-dev, libxml-parser-perl
[YOCTO #2597]
Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Robert Yang [Thu, 20 Sep 2012 07:47:55 +0000 (15:47 +0800)]
opkg svn: respect to the arch priority
This is for fixing the problem:
1) bitbake core-image-sato-sdk with MACHINE=qemux86
2) bitbake core-image-sato with with MACHINE=crownbay
The qemux86's PACKAGE_ARCH is i586, the crownbay's is core2, but several
i586 packages will be installed into crownbay's rootfs though there are
core2 packages. For example, there are:
The crownbay.conf says:
PREFERRED_VERSION_xserver-xorg ?= "1.9.3"
What the crownbay's image needs is xserver-xorg*_1.9.3-r1_core2.ipk, but
the xserver-xorg*_1.11.2-r7_i586.ipk will be installed, this is
incorrect.
This is caused by opkg's selecting mechanism: when more than one
candidate is found, it will use the higher version one and ignore the
arch priority.
we have several conf files which set the PREFERRED_VERSION_pkg = "..." ,
but there is no such a mechanism which can let us tell the opkg to
install the preferred version. When the preferred version is higher,
this is OK, but if the preferred version is lower, there would be
problems:
1) Most of the packages are core2 in the image, but several of them are
i586, though we have built the core2 ones, this seems strange.
2) What's worse is that the image may not work since the preferred
version pkg is not installed.
We have set the arch priority clearly in the opkg.conf, I think that
respect to the arch priority is reasonable during the image generation.
Add the "--select-higher-version" option to let the user have another
choice, the default is no.
[YOCTO #2575]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
This is a simple upgrade. Dropping the unneeded patches
and adding --disable-werror to configure since thats is
what one of the patch was doing which was dropped.
qemux86-64: Support for KVM, paravirt and virtio added
KVM, paravirtualization and virtio drivers are now activated
in runqemu using the kvm option flag for qemux86-64.
Host CPU features are also exported to guest OS (Yocto Linux).
Usage example: runqemu qemux86-64 core-image-x11 kvm
qemux86: Support for KVM, paravirt and virtio added
KVM, paravirtualization and virtio drivers are now activated
in runqemu using the kvm option flag for qemux86.
Host CPU features are also exported to guest OS (Yocto Linux).
Usage example: runqemu qemux86 core-image-x11 kvm
Scott Garman [Wed, 19 Sep 2012 05:50:50 +0000 (22:50 -0700)]
runqemu: show bitbake errors to user
In certain edge cases, bitbake may fail to run and cause setup_tmpdir()
within runqemu to fail, and not give the user a helpful error message.
Catch this case and show the user the output of bitbake -e.
This fixes [YOCTO #3112]
Signed-off-by: Scott Garman <scott.a.garman@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Ross Burton [Fri, 7 Sep 2012 09:55:55 +0000 (10:55 +0100)]
librsvg: make the libcroco dependency a PACKAGECONFIG option
Default to enabling it as we were build-depending on it already. If a user
needs the disk space and the limitations imposed by not using libcroco are
acceptable they can override this.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Basically, both the rpm-native and rpm should depend on bison-native,
but don't need depend on bison, but it seems that it isn't necessary
to add another depend line:
Andrei Gherzan [Thu, 20 Sep 2012 09:56:59 +0000 (12:56 +0300)]
Replace "echo -e" with "printf" to have the same behavior in dash or bash
oe-core removed the prerequisite to have sh as bash. POSIX doesn't define
any options and furthermore allows 'echo -e' to be the default behavior.
This means that in dash 'echo -e' will actually print '-e' and interpret
backslashes by default. We use instead 'printf' builtin command with or
without '\n' to simulate 'echo -e' or 'echo -n'.
'printf' needs format while 'echo' can be used without any arguments. So
'echo >' was replaced by 'printf "" >'.
'echo' without '-n' flag adds a new line by default so to keep the same
behavior of two new lines while using 'echo "\n"', 'printf "\n\n"' is
used.
[YOCTO #3138]
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rootfs_rpm: Add Multilib prefix to installed_packages list
RPM does not name it's packages with the Multilib prefix,
but the rootfs_rpm class keeps track of the Multilib prefixs
in a list. Use that list to re-attach the prefix for use with
the license bbclass, buildhistory bbclass will also use this
and make it more accurate between multilib and non-multilib.
Use the embedded "Platform" information to ensure we get all
the correct matching.
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andrei Gherzan [Mon, 17 Sep 2012 10:49:58 +0000 (13:49 +0300)]
util-linux: Fix bloken swapoff symlink
There were 2 issues with this symlink.
1. Is was installed in base_bindidir but packaged in bindir. Fixed to
be packaged in base_bindir
2. The symlink swapoff was created to point to swapon. The problem is
that swapoff is an alternative so it would end up pointing to
swapoff.util-linux which was an inexistent file. The fix is to create
a symlink swapoff.util-linux to swapon.util-linux.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Jack Mitchell [Thu, 13 Sep 2012 12:27:21 +0000 (13:27 +0100)]
local.conf.sample: change valgrind support architecture comment
The comment for debug-tools states valgrind will only be installed for x86
targets. This is not true as valgrind now supports x86*, PPC* and ARMv7a;
delete the comment as the architecture support is now so varied.
Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 14 Sep 2012 04:57:27 +0000 (00:57 -0400)]
linux-yocto/3.4: make uprobes select perf events
uprobes depends on functionality provided by perf events. After
uprobes was enabled in the standard kernel the mpc8315 board showed
link errors due to missing perf event functions.
This problem isn't isolated to the board or powerpc arch, but all
other boards have PERF_EVENTS enabled. To fix this, we make UPROBE_EVENT
select PERF_EVENTS, and any new boards will be protected from the
same failure.
We also update the configuration fragments since CONFIG_UPROBES depends on
CONFIG_PERF_EVENTS being set, so PERF_EVENTS needs to be added whenever
uprobes are enabled.
[YOCTO #3111]
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Richard Purdie [Fri, 14 Sep 2012 08:41:59 +0000 (09:41 +0100)]
bitbake.conf: Assign SRCPV so that it will be tracked correcting in the sstate checksum
Currently, SRCPV is just listed as having a value of ${@bb.fetch2.get_srcrev(d)}
which isn't helpful. This can mean that if PV changes, two recipes can have the
same sstate checksum despite having different PV values since the PV value itself
isn't tracked anywhere.
Adding this line means that the real PV value is expanded and recorded in the sstate
checksum, meaning the sstate packages no longer overlap. This is critical in ensuring
consistent builds for revipes using SRCPV.
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 13 Sep 2012 22:40:29 +0000 (23:40 +0100)]
opkg: Fix package dependency issue for preinsts
When processing dependencies, we need to look for both the SW_INSTALL and
SW_UNKNOWN states. If we don't do this, dependencies can be missed
and preinst scripts can run before dependencies are all installed.
This leads to package installation errors for packages like dbus-1
and associated user permission errors.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Andrei Gherzan [Thu, 13 Sep 2012 22:22:26 +0000 (01:22 +0300)]
taglib: Update to v1.8
Patches not needed anymore - they switched to cmake.
LGPL license was replaced with the actual LGPL 2.1 file.
License section in audioproperties.h file was modified as it includes the
new address of Free Software Foundation.
libtag static library is not built by default anymore and if cmake is
instructed to build static library than shared library is deactivated.
So actually this is a switch now.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Bruce Ashfield [Thu, 13 Sep 2012 12:59:08 +0000 (08:59 -0400)]
kernel-yocto: fix kernel configuration audit for custom yocto kernels
It was reported that the kernel configuration checks for custom yocto
kernels had the following output:
NOTE: validating kernel configuration
grep: /meta-series: No such file or directory
grep: /meta-series: No such file or directory
WARNING: Can't find any BSP hardware or required configuration fragments.
WARNING: Looked at //cfg///hdw_frags.txt and //cfg///required_frags.txt in directory: //cfg//
NOTE: Tasks Summary: Attempted 375 tasks of which 367 didn't need to be rerun and all succeeded.
which is not inspire confidence in the output of the process.
Completely inhibiting the check is one option to remove the messages,
but that removes the ability see output, which can help move users to
a better or more fully configured linux-yocto based kernel.
To fix this, we have to ensure that the path to the meta-series is
always valid, and that the tools can deal with not all files existing
in the audit directory.
Since custom yocto kernels do not set KMETA (they don't have a meta branch),
we ensure that a default of 'meta' is passed to the audit ('meta' is always
valid), and that kconf_check itself can deal with an incomplete set of
input audit files.
The net result is output like this (using a defconfig with invalid options
for the kernel being built):
NOTE: validating kernel configuration
This BSP sets 19 invalid/obsolete kernel options.
These config options are not offered anywhere within this kernel.
The full list can be found in your kernel src dir at:
meta/cfg/standard/qemux86/invalid.cfg
There were 1 instances of config fragment errors.
The full list can be found in your kernel src dir at:
meta/cfg/standard/qemux86/fragment_errors.txt
The full list can be found in your kernel src dir at:
meta/cfg/standard/qemux86/missing_required.cfg
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Peter Seebach [Thu, 13 Sep 2012 18:29:59 +0000 (13:29 -0500)]
pseudo_1.4.1.bb: update to pseudo 1.4.1, fixing 32-bit host problems
There were a number of cases where pseudo used plain old stat()
to get dev/inode data for files; on 32-bit hosts, this could fail
if the files were over 2GB, causing pseudo to prevent removing of
large files. This is fixed in 1.4.1.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Thu, 13 Sep 2012 16:23:12 +0000 (17:23 +0100)]
scripts/combo-layer: ensure we validate branch/revision on init
If both branch and last_revision are specified for a component when
combo-layer init is run, ensure that the specified revision is actually
on the specified branch and error out if not. Also ensure that the error
message mentions the component.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Thu, 13 Sep 2012 16:23:11 +0000 (17:23 +0100)]
scripts/combo-layer: use last_revision if specified in init
If last_revision is specified for a component when running combo-layer
init, then use that revision instead of the latest revision on the
branch. Also, remove unnecessary git checkout during init since we
specify the revision to all calls to git when dealing with the component
repositories.
Fixes [YOCTO #3040].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Andrei Dinu [Thu, 13 Sep 2012 08:26:45 +0000 (11:26 +0300)]
libffi upgrade to 3.0.11
Changes :
- Added ax_append_flags.m4 and ax_check_compile_flag.m4 to the m4 directory.
The files were missing and aclocal.m4 was generated without those two macros.
- Added a new license md5 checksum to the recipe because the old LICENSE file
differs from the new one here :
OLD : libffi - Copyright (c) 1996-2011
NEW : libffi - Copyright (c) 1996-2012
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Jack Mitchell [Thu, 13 Sep 2012 12:58:30 +0000 (13:58 +0100)]
git: define NO_PYTHON=1 to stop git requiring python as a dependancy
Git requires python by default as an included script to link git
to perforce is written in Python. Define NO_PYTHON to stop the
script being included and thus remove the dependancy on Python.
Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Andrei Gherzan [Mon, 10 Sep 2012 16:26:27 +0000 (19:26 +0300)]
image_types.bbclass: Round up ROOTFS_SIZE after base_size check
If we round up ROOTFS_SIZE to IMAGE_ROOTFS_ALIGNMENT before checking if
base_size is greater then IMAGE_ROOTFS_SIZE, we can end up adding an
unaligned value to IMAGE_ROOTFS_SIZE. Obviously, if
IMAGE_ROOTFS_EXTRA_SPACE was overwritten with an unaligned value. So
let's add the round up code after the base_size calculus and it's
comparison.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Constantin Musca [Wed, 12 Sep 2012 11:58:18 +0000 (14:58 +0300)]
patch.bbclass: Use one TMPDIR per patching process
We must use one TMPDIR per process (/tmp/${PID}) so that the patching
processes don't generate the same temp file name (the "patch" program
uses the TMPDIR environment variable for deciding where to create the
temp files).
[YOCTO #3070]
Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
runqemu: Explicitly specify MACHINE when calling bitbake
When using runqemu with distros outside oe-core then
MACHINE may not be there in local.conf so use the one
thats available in environment of runqemu which is actually
the correct one.
Darren Hart [Wed, 12 Sep 2012 04:17:07 +0000 (21:17 -0700)]
rt: Add hwlatdetect to rt images
This adds the newly separated hwlatdetect package to the rt images.
While this pulls in a python dependency, it is worth have hwlatdetect
installed by default on these images as they are intended to assist in
the evaluation of platforms for use in real-time environments.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Wed, 12 Sep 2012 04:17:06 +0000 (21:17 -0700)]
rt-tests: Add hwlatdetect package
Split out rt-tests into rt-tests and hwlatdetect packages as the latter
requires python and we want to be able to install the core rt-tests on
minimal systems without python.
This also addresses QA warnings about the hwlatdetect files not being
packaged.
Add an RRECOMMENDS on the hwlat kernel module package for the new
hwlatdetect package as the python test requires the kernel module to
function properly (but we probably don't want to kill a build if the
exact kernel module package is not available).
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
