Matthieu Crapet [Mon, 30 Jun 2014 14:23:21 +0000 (16:23 +0200)]
libav: add PACKAGECONFIG for theora, libvorbis, speex and openssl
Dropped libvorvis dependency because there is already a (better) builtin vorbis codec.
Don't confuse codec names: "vorbis" (builtin) and "libvorbis" (using external library).
Changes:
- add --enable-nonfree when faac or openssl are used
- add DESCRIPTION
- sort PACKAGECONFIG entries
Tested with libav-0.8.11 & libav-9.13.
Note: Be sure to have a recent version of bitbake (2014-06-11 or better) including this:
http://cgit.openembedded.org/bitbake/commit/?id=2e742c03e8dfdfa67899e7f5d579ed14bd87e139
It affects behavior of bb.utils.contains_any
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Mon, 16 Dec 2013 13:14:51 +0000 (14:14 +0100)]
gtk+: Add PACKAGECONFIG for directfb
* building without x11 doesn't work, because it sets default
gdkbackend to x11 and then requires cairo-xlib to be available
* checking for CAIRO_BACKEND... no
configure: error: Package requirements (cairo-xlib >= 1.6) were not met:
No package 'cairo-xlib' found
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Richard Purdie [Tue, 1 Jul 2014 17:01:07 +0000 (18:01 +0100)]
adt_installer: Fix real envrionment script issues
The previous change to adt_installer was incorrect, this reverts it and
fixes the real issue. The real issue is that if a previous installation was
present, it may have been moved and therefore the paths returned by opkg
could be a little odd.
To address this, when we move files to a different location, ensure we
update the *.list files with the revised paths. This means later installs
over the top return consistent values from opkg and the script works
as intended.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 1 Jul 2014 17:00:36 +0000 (18:00 +0100)]
toolchain-scripts: Add handling for CANADIANEXTRAOS
When we build a general toolchain script we should add all the OS
variants to PATH, not just the current one. This is because some can
cross reference each other and if the triplet prefixed ld can't be found
for example, you recieve strange errors.
Doing this resolves bugs exposed during SDK testing.
[YOCTO #6490]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For qemu-native, the pkg-config paths do not
include build host paths.
This is an issue for libsdl for example, where SDL is
used by qemu, but for qemu-native libsdl-native is not
built, but assumed to be provided by the build host.
Because pkg-config do not search for libsdl config files
on the build host sysroot, the configure stage of qemu-native
will fail because it will not find SDL as being installed.
Usually, the isssue is masked by a functional sdl-config that
will be interogated instead of pkg-config. However, on Build
Appliance, sdl-config is deliberately made non-functional,
so the issue manifests itself.
The fix will create an extended PKG_CONFIG_PATH, which does
include the build host sysroot paths for pkg-config.
Fix for [YOCTO #6495].
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Gawk was failing to compile because of the optional feature mpfr if it found
libmpfr on build host and linked against that or mpfr existed in sysroot but
not in deploy, or if gawk was pulled from sstate and someone had mpfr built.
[YOCTO# 6473]
Signed-off-by: Roxana Ciobanu <roxana.ciobanu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Roxana [Mon, 30 Jun 2014 09:44:03 +0000 (12:44 +0300)]
python3: fix builtins imports
The intent of this code is to generate things like -L=/usr/lib/foo so
for paths which start with "/" we should appent the "=". We should not do this
for ".". On some recent versions of binutils or patchsets on some recent
distros this appears to work differently and causes build failures, for example
on Ubuntu 14.04 LTS.
The simple fix is to check for "." as the path prefix.
[YOCTO #6467].
Signed-off-by: Roxana <roxana.ciobanu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drew Moseley [Thu, 26 Jun 2014 17:01:16 +0000 (13:01 -0400)]
classes/kernel: Use full path for symlink in update-alternatives.
Use a fully qualified path for the <path> parameter in calls
to update-alternatives. The chkconfig-alternatives version
requires a full path and without it, the symlink is not
properly created.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Wed, 25 Jun 2014 15:31:38 +0000 (16:31 +0100)]
classes/report-error: tweak summary message
* We don't want everyone to remove their identifying info, just if they
feel the need to
* Split lines for clarity
* A couple of grammar/spelling tweaks
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Wed, 25 Jun 2014 17:06:37 +0000 (19:06 +0200)]
test-dependencies.sh: Return non-zero return code when there was some failure detected
* this is useful when using from jenkins job where you don't want to read
output just to dectect how bad it was
* add .log suffix to all files, so they can be easily downloaded from
http servers without default mimetype set to something useful
* add recipes failed in step 1 to steps 2 and 3 to generate standalone
logs for them
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Wed, 25 Jun 2014 17:06:36 +0000 (19:06 +0200)]
sstate-diff-machines.sh: Return non-zero return code when there was some failure detected
* add --analyze option, which is useful when using from jenkins job
where you don't want to read output just to dectect how bad it was
* I was always using something like this inside jenkins job, but better
to share it in original script
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Thu, 26 Jun 2014 14:16:55 +0000 (15:16 +0100)]
patch.bbclass: unset TMPDIR after use
GNU Patch < 2.6.1 has a race condition so we create a per-instance TMPDIR to
avoid this. This was implemented by setting os.environ[TMPDIR] but at the end
of do_patch the temporary directory is deleted but TMPDIR is not unset.
In general this doesn't cause a problem but if do_patch is embedded in a larger
function then TMPDIR is set to a directory that doesn't exist. Avoid this by
removing TMPDIR from os.environ when the directory is deleted.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Gortmaker [Thu, 26 Jun 2014 19:08:47 +0000 (15:08 -0400)]
recipes-devtools: fix segfault in lib32-gcc with "." multilib_dir
When enabling a lib32-gcc in a 64 bit build, without doing any
other configuration, the mutilib dir is unspecified, which is
represented internally in gcc as "." and as such uncovers an
invalid free on a non-malloc'd pointer.
As suggested by the gcc folks, simply make sure the "." case
is also stored in a malloc'd pointer, so that the intended
runtime behaviour of the code remains unchanged.
Patch has been accepted by upstream maintainers of gcc.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drew Moseley [Sat, 28 Jun 2014 21:57:34 +0000 (17:57 -0400)]
initrdscripts: Try to boot if boot label is unknown
The init-live.sh scripts assumes that the boot label set by
the LABELS variable is either "boot", "install", or
"install-efi". If that variable is overridden to something else
we fall off the end of the case statement and the system locks
up. If the boot label is unknown, at least attempt to boot.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 27 Jun 2014 09:23:23 +0000 (10:23 +0100)]
distutils/distutils3: Fix bashism
read -d is a bashism. Replace with a direct exec to avoid the problem
in this case. This fixes silent build failures in do_install of
tasks on systems with dash as /bin/sh.
Also merge the fix to distutils for only changing necessary files
to disutils3 as well.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Wed, 25 Jun 2014 09:16:20 +0000 (02:16 -0700)]
createrepo: RDEPENDS on libxml2-python
Fixed the error when run createrepo on target:
Traceback (most recent call last):
File "/usr/share/createrepo/genpkgmetadata.py", line 27, in <module>
import libxml2
File "/usr/lib64/python2.7/site-packages/libxml2.py", line 1, in <module>
ImportError: No module named libxml2mod
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Wed, 18 Jun 2014 02:38:15 +0000 (10:38 +0800)]
initramfs-framework: get rid of udev-utils
Now that udev-utils package has been removed and 'udevadm' has been
moved to udev package, the initramfs-framework should also get rid
of the udev-utils package.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Wed, 18 Jun 2014 02:38:14 +0000 (10:38 +0800)]
systemd: remove udev-utils, move 'udevadm' to udev package
The udev package RDEPENDS on the udev-utils package, and the actually
udev-utils package relies on the udev package because if there's no
udev daemon, 'udevadm' command doesn't make much sense.
Now that we have removed udev-utils package and moved 'udevadm' to
the udev package in the older udev recipe, we should do the same
for systemd.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Wed, 18 Jun 2014 02:38:13 +0000 (10:38 +0800)]
udev: remove udev-utils, add 'udevadm' to udev package
Previously, the udev package only RRECOMMENDS udev-utils package,
but its init script in the udev package really relies on the
'udevadm' command to work properly. As a result, if 'NO_RECOMMENDATIONS'
is set to '1', errors occur at system start-up.
The udev-utils package only contains one file, that is /bin/udevadm.
So it's better that we remove the udev-utils package and move the
'udevadm' command to the udev package.
[YOCTO #6388]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
udev: update init script for conditional probing of platform bus
Make probing of "platform" bus conditional based on PROBE_PLATFORM_BUS
variable from /etc/default/udev-cache on subsequent boots when udev
cache is used. PROBE_PLATFORM_BUS has to be set to "yes" in order to
force probing on every boot, otherwise it uses the old default behaviour
of probing it just the first time.
This is helpful on modern SoCs where most of the low level peripheral
drivers are registered on the platform bus and need to be probed to load
the necessary modules and enable the connected buses and subsystems.
Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Wed, 25 Jun 2014 00:28:06 +0000 (19:28 -0500)]
gcc-cross-canadian: Add configure-target-libgcc
While we're not going to package the libgcc component as part of the SDK,
we do need to generate it to get the unwind, and quadmath headers. Without
this change it is not possible to build eglibc or other components that
require these headers with the SDK toolchain.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ash Charles [Tue, 24 Jun 2014 20:10:18 +0000 (13:10 -0700)]
u-boot: Optionally deploy an environment or script file
Some boards are configured to read a script or environment file as part
of the u-boot boot sequence. This file, typically called 'uEnv.txt' or
'boot.scr', would be deployed alongside the u-boot binary. If a recipe
uses this u-boot.inc, such a file can be deployed by setting the optional
UBOOT_ENV parameter and including the file in the SRC_URI. For example:
non-PIC references to __ehdr_start in pie and shared
Rather than hacking every backend to not discard dynamic relocations
against an undefined hidden __ehdr_start, make it appear to be defined
early. We want __ehdr_start hidden before size_dynamic_sections so
that it isn't put in .dynsym, but we do need the dynamic relocations
for a PIE or shared library with a non-PIC reference. Defining it
early is wrong if we don't actually define the symbol later to its
proper value. (In some cases we want to leave the symbol undefined,
for example, when the ELF header isn't loaded, and we don't have this
infomation available in before_allocation.)
So replace the existing patches with this one.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Fri, 23 May 2014 13:30:34 +0000 (14:30 +0100)]
list-packageconfig-flags: improve option parsing
* Use optparse instead of getopt (less code & automatic help)
* Change help text / output to use "recipe" instead of "package"
* Print something to indicate the script is still gathering information
Note that the long options have been renamed as appropriate.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Paul Eggleton [Tue, 22 Apr 2014 11:07:35 +0000 (12:07 +0100)]
scripts: consolidate code to find bitbake path
Several of these scripts were using duplicated code (and slightly
different methods) to find the path to bitbake and add its lib
subdirectory to the Python import path. Add some common code to do this
and change the scripts to use it.
Fixes [YOCTO #5076].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Kai Kang [Fri, 20 Jun 2014 06:06:30 +0000 (14:06 +0800)]
syslinux: fix isohybird overflows on 32 bit system
When call isohybrid with option '-u', it overflows on a 32 bits host. It
seeks to 512 bytes before the end of the image to install gpt header. If
the size of image is larger than LONG_MAX, it overflows fseek() and
cause error:
yzhu1 [Wed, 18 Jun 2014 09:41:30 +0000 (05:41 -0400)]
nss-3.15.1: fix CVE-2013-1739
Mozilla Network Security Services (NSS) before 3.15.2 does
not ensure that data structures are initialized before
read operations, which allows remote attackers to cause a
denial of service or possibly have unspecified other
impact via vectors that trigger a decryption failure.
Ming Liu [Fri, 20 Jun 2014 10:28:01 +0000 (18:28 +0800)]
mesa.inc: remove '-' suffix in substitution of package names
The current substitution to package names is not correct, its original
purpose is: replace "mesa-" with "mesa-dri-", in which process the
"mesa" package is left out, this leads mesa package to announce to
conflict with itself, and therefore cause build failures when multilib
mesa are being added to rootfs.
Changing the replacement pattern to without a '-' suffix will fix it.
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Mon, 23 Jun 2014 21:44:41 +0000 (14:44 -0700)]
mkefidisk.sh: Allow symlink for device
Allow the user to specify a symlink as the host device. If a link is
used, mkefidisk will now dereference it and use the link target when
looking for sysfs information.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga [Mon, 23 Jun 2014 13:18:44 +0000 (16:18 +0300)]
iproute2: upgrade to 3.15.0
The main new features are:
* ss gets more attention
* Support for HHF qdisc
* Updates to bridge command
* Lots of vxlan related changes
* Lots of little corrections and build fixes.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeqa/targetcontrol.py: Separate the matching of supported image fstypes from the resulting value check.
Because we used a bb.fatal call inside the get_image_fstype classmethod, this caused problems when accessed without instantiating the object with a valid bb environment.
Separating the matching part of the classmethod(that is usable by outside scripts) from the check of the resulting value.
The matching is done within a new classmethod and the latter keeps the old method name and internal functionality, this way we don't have to change any other target controllers code.
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga [Fri, 20 Jun 2014 15:42:17 +0000 (18:42 +0300)]
oe-core/init-install-testfs.sh: do not overwrite /etc/mtab if the link already exist
Overwriting of /etc/mtab would fail as below if the /etc/mtab link already
exist during installation phase, this patch fix this problem by checking
existance of the link before try to overwrite it.
Error message during installation if the /etc/mtab exists:
"cat: /proc/mounts: input file is output file"
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga [Fri, 20 Jun 2014 15:42:16 +0000 (18:42 +0300)]
init-install-testfs: add grub serial line support
For automated hardware testing, boot process control
via serial interface is needed. As such, in grub, serial
line support is added upon testmaster image install.
Also add a specific timeout to automatically start
the master image upon start of testing phase.
Tested on multiple hardware targets without issues.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 18 Jun 2014 16:58:56 +0000 (17:58 +0100)]
sstatesig: Add try/except around the stat calls
Its possible sstate symlinks to other sstate mirrors which then my get
removed/cleaned. If we find invalid symlinks, skip over them rather
than error with a backtrace.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 18 Jun 2014 16:58:18 +0000 (17:58 +0100)]
sstate: Fix shared work preconfigure task handling
When the preconfigure task was added to gcc, it wasn't added to sstate's list
of possible shared work tasks. This meant that diffsigs wasn't able to find
the preconfigure sigdata/info file since it has inconsistent naming.
This adds the task name to the list. Ideally this list would be autogenerated
or not even required, right now its a sanity test that the shared work
code works as intended so is best left as is.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 17 Jun 2014 15:26:14 +0000 (11:26 -0400)]
linux-yocto/3.14: enable mpc8315e NAND and Yaffs2 gcc 4.9 fix
Updating the meta branch with configuration changes to enable NAND
booting on the mpc8315e reference board.
We also update the BSP SRCREVs to fix a compilation issue with
date/time on Yaffs2 and gcc 4.9.
Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hongxu Jia [Tue, 17 Jun 2014 11:03:03 +0000 (19:03 +0800)]
ghostscript: fix sizeof(GX_COLOR_INDEX_TYPE) not equal to ARCH_SIZEOF_GX_COLOR_INDEX on mips
The commit: http://ghostscript.com/pipermail/gs-cvs/2014-February/017271.html
newly added a 'compile time assert' on 9.14 that causes the build to fail if
the sizeof(GX_COLOR_INDEX_TYPE) is not equal to ARCH_SIZEOF_GX_COLOR_INDEX.
Disscuss on IRC:
http://ghostscript.com/irclogs/2014/02/06.html
The commit from OE-Core rev: 78a13ba170c1de6d7ef077854e3e34e18d17099f
...
ghostscript: add pregenerated objarch for mipsel/mips64/mips64el
...
has defined ARCH_SIZEOF_GX_COLOR_INDEX according to the type of archs,
and assigned 4 for mips/mipsel (8 for others).
The GX_COLOR_INDEX_TYPE was defined at do_configure time, which used
large color index (with 8) by default. We should manually choose the
opposite one (with 4) for mips/mipsel.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hongxu Jia [Tue, 17 Jun 2014 11:03:02 +0000 (19:03 +0800)]
ghostscript: upgrade to 9.14
- The LICENSE added AGPL for the font files (in Resource/Font);
- Rebase ghostscript-9.02-parallel-make.patch to 9.14
- Rebase ghostscript-native-fix-disable-system-libtiff.patch
since base/configure.ac has been moved to configure.ac.
http://git.ghostscript.com/?p=ghostpdl.git;a=commitdiff;h=f1488c5aff54f37ee67759827d4298592af5dbc8
- Obsolete ghostscript-9.05-NOT-check-endian.patch, and add option
'--enable-little-endian'/'--enable-big-endian' conditionally to
intead.
http://git.ghostscript.com/?p=ghostpdl.git;a=commitdiff;h=e76dc46756e89a14a3348bce12a633d32e4fa831
- Add base-genht.c-add-a-preprocessor-define-to-allow-fope.patch
for native, since the upstream replace all fopen calls with
gp_fopen and add a preprocessor define so that any unintential
calls directly to fopen will cause an error. This patch add a
preprocessor define to allow fopen calling in base/genht.c as
exceptions.
http://git.ghostscript.com/?p=ghostpdl.git;a=commitdiff;h=773c69e46e70bdd5482676437dafd2ca83397643
- Remove package ghostscript-cups, since CUPS filters
gstoraster and gstopxl has been moved to cups-filters
which is a free software package hosted by OpenPrinting.
http://git.ghostscript.com/?p=ghostpdl.git;a=commitdiff;h=9304a21699a6c17579fae32f44f5c92a37c13e2d
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/cups-filters
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
