Joshua Watt [Wed, 19 Feb 2020 00:44:43 +0000 (18:44 -0600)]
jquery: Add recipe
Adds a recipe that packages jQuery in a manner borrowed from debian. The
primary purpose is to make the diffoscope output from the autobuilder
easier to navigate.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are a number of ptest failures due to executables not found in
the image. Since these executables are in FILES_${PN}-dev, depending
all of -dev which is an overkill. We take them out of -dev and put in
-utils, then depend on the latter instead.
When starting a glib ptest but decided to Ctrl-c interrupt midway,
./run-ptest cannot be restarted unless running `userdel glib2-test`
manually. Therefore adding a check prior to ptest will ensure the
ptest can be restarted.
Signed-off-by: Matthew Zeng <matthew.zeng@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Lori Hikichi [Tue, 18 Feb 2020 19:14:22 +0000 (11:14 -0800)]
rpm2cpio.sh: fix to handle newline character
This script is attempting to read binary data from an rpm file.
If any of the bytes it is attempt to read is the binary value 0xa
(i.e. a newline) then the script does not properly deal with this
special case. Due to the behavior of command substitution, instead of
fetching the value 0xa, the script makes an error and get the value 0
instead.
The fix and the following explantion was taken from this post...
Command substitution $(…) strips final newlines in the command output.
There's a fairly easy workaround. Make sure the output ends in a
character other than a newline, then strip that one character.
Signed-off-by: Lori Hikichi <lori.hikichi@broadcom.com> Signed-off-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Fri, 14 Feb 2020 18:34:14 +0000 (12:34 -0600)]
newlib: Move syscalls from newlib to libgloss
By passing --disabled-newlib-supplied-syscalls, newlib will disable the
generation of builtin syscalls and move this to libgloss. (This also
affects the generation of crt0.o.)
libgloss SHOULD then provide the syscalls, crt0.o and other functions that
are no longer part of newlib itself. This now means that you must link
with both newlib and libgloss, whereas before newlib would run in many
configurations by itself.
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 18 Feb 2020 17:27:26 +0000 (17:27 +0000)]
perl: Fix encode module reproducibility issues
The code is encoding host compiler parameters into target builds. Avoid
this for our target builds. This should resolve builds which aren't
reproducible between hosts with different compilers.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kai Kang [Tue, 11 Feb 2020 15:07:41 +0000 (23:07 +0800)]
glibc-package.inc: fix multilib headers conflict
Pass bits/endianness.h and bits/struct_rwlock.h to oe_multilib_header in
glibc-package.inc to fix files conflict:
| Error: Transaction check error:
| file /usr/include/bits/endianness.h conflicts between attempted installs of lib32-libc6-dev-2.31-r0.armv7vet2hf_vfp and libc6-dev-2.31-r0.aarch64
| file /usr/include/bits/struct_rwlock.h conflicts between attempted installs of lib32-libc6-dev-2.31-r0.armv7vet2hf_vfp and libc6-dev-2.31-r0.aarch64
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When running oe-selftest in concurrency mode (e.g. with oe-selftest
--run-tests oescripts.OEPybootchartguyTests -j 4), if a skip occurred
during setUpClass() rather than within individual tests, the entire
suite would show "UNKNOWN" as each test's result. This is because
subunit doesn't know how to handle skips outside of individual tests.
An example of where this occurs is when running the above call to
oe-selftest in concurrency mode on a host machine that does not have
python3-cairo installed.
Patch subunit inside concurrencytest.py to provide a method called
outSideTestaddSkip, which will allow subunit to correctly detect the
skip in setUpClass().
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alex Kiernan [Sun, 16 Feb 2020 11:42:24 +0000 (11:42 +0000)]
systemd: upgrade v244.1 -> v244.3
Drop all systemd-boot patches and use an additional cross-file instead
to pick up EFI cc and objcopy. For EFI ld, we can use the command line
efi-ld option, but have to ensure it's something which can be exec'd
directly.
Commits from v244-stable:
c4280c342bbf Revert "Support Plugable UD-PRO8 dock" bb598b56eb3c hibernate-resume-generator: wait "infinitely" for the resume device 77c04ce5c270 hwdb: update to v245-rc1 b4eb8848240c Fix typo in function name e2d4cb9843c5 polkit: when authorizing via PK let's re-resolve callback/userdata instead of caching it 83bfc0d8dd02 sd-bus: introduce API for re-enqueuing incoming messages 5926f9f1723f polkit: use structured initialization 0697d0d972c8 polkit: on async pk requests, re-validate action/details 2589995acdb2 polkit: reuse some common bus message appending code 5b2442d5c3ec bus-polkit: rename return error parameter to ret_error 0a19ff7004e4 shared: split out polkit stuff from bus-util.c → bus-polkit.c 1325dfb5778d test: adapt to the new capsh format 3538fafb4714 meson: update efi path detection to gnu-efi-3.0.11 3034855a5b62 presets: "disable" all passive targets by default c2e304681929 shared/sysctl-util: normalize repeated slashes or dots to a single value 6f4364046f90 dhcp6: do not use T1 and T2 longer than one provided by the lease 0ed6cda28dff network: fix implicit type conversion warning by GCC-10 f6a5c02d26b1 bootspec: parse random-seed-mode line in loader.conf ddc5dca8a73b sd-boot: fix typo 2bbbe9ae41ab test: Synchronize journal before reading from it 072485d661d7 sd-bus: fix introspection bug in signal parameter names 80af3cf5e36b efi: fix build. d7ede1ade564 generator: order growfs for the root fs after systemd-remount-fs e9904998213d loginctl: use /org/freedesktop/login1/session/auto when "lock-session" is called without argument 82dd4caf014c Documentation update for x-systemd.{before,after} a60459764d9d man: fix typo in systemd.netdev Xfrm example fc053e2dfb3f timesyncd: log louder when we refuse a server due to root distance af0e630693fa resolved: drop DNSSEC root key that is not valid anymore ae59f1666ca6 journal: don't use startswith() on something that is not a NUL-terminated string 536ef6d72bc6 test: add test for https://github.com/systemd/systemd/issues/14560 b78fe3c1b1a8 core: make sure StandardInput=file: doesn't get dup'ed to stdout/stderr by default a1561a08f2d5 pkgconf: add full generator paths e5f2d11489ec tree-wide: we forgot to destroy some bus errors ea67fd42067b mount: make checks on perpetual mount units more lax 2f23c648bce4 core: never allow perpetual units to be masked 9ba11dffb09a typo: "May modify to" -> "May modify" 84c048799a78 Disable reading SystemdOptions EFI Var when in SecureBoot mode 4c2d72b53091 sysctl: downgrade message when we have no permission c001a285a3a2 Clarify journald.conf MaxLevelStore documentation 45d52c7615fd logind: refuse overriding idle hint on tty sessions b1a0be45b4ee cgroup: update only siblings that got realized once e6d694254fe1 mount: mark an existing "mounting" unit from /proc/self/mountinfo as "just_mounted" d8fd38769c36 journalctl: Correctly handle combination of --reverse and --lines (fixes #1596) cd19bd31d808 journalctl: Correctly handle --show-cursor in combination with --until or --since and --reverse 1320aa92dc0a core: fix re-realization of cgroup siblings 14164ec6bc77 core: propagate service state to socket in more load states c22bf6b31a45 man: describe "symlink" and "systemctl link" explicitly in UNIT FILE LOAD PATH 26f3a534f1ab core: be more restrictive on the dependency types we allow to be created transiently 377cc5d91ea5 udev: don't import parent ID_FS_ data on partitions 7d5060d53994 man: fix option name 98c03090274a Support Plugable UD-PRO8 dock e9687d09dccf gpt-auto: don't assume XBOOTLDR is vfat 7057fe863007 man: fix documentation of IBM VIO device naming f8d1df1045be man: slightly extend documentation on difference between ID_NET_NAME_ONBOARD and ID_NET_LABEL_ONBOARD 1faf5dde4d4a boot: fix osrel parser 65d247af1786 udev: do not use exact match of file permission 6da978f89b48 network: lower the log-level of harmless message 5d8a614f926c hwdb: ignore keys added in kernel 5.5 8b1bd1746989 systemctl: skip non-existent units in the 'cat' verb b2f342f92b54 systemd.exec: document the file system for EnvironmentFile paths 945f3a231f6f systemd-analyze: fixed typo in documentation 2c8ae283b0ee test-condition: fix group check condition 6b48479f4582 umount: show correct error message faba5b2ba8c9 Revert "Drop dbus activation stub service" 3dd98f1998f9 man: add section about user manager units 1c80a8ced006 man: add remote-*.targets to the bootup sequence 9afd65f15e93 time-util: also use 32bit hack on EOVERFLOW 561923291383 [man] note which UID ranges will get user journals 588a23ef2684 [man] fix URL 0130a03179f6 analyze: badness if neither of RootImage and RootDirectory exists 93074c962e3a network: introduce AddPrefixRoute= and deprecate PrefixRoute= a8ad020ea0ba shared/dropin: fix assert for invalid drop-in 946cdba156dd initrd: make udev cleanup service confict trigger and settle too c0a8a92e6027 man: we support growing xfs too these days 608d88273494 time-util: deal with systems where userspace has 64bit time_t but kernel does not cfced59a4bd8 [import] fix stdin/stdout pipe behavior in import/export tar/raw 73435b219553 systemctl: show what verbs support --dry-run in the help page dc56b94e1308 cryptsetup-generator: unconfuse writing of the device timeout 0757ad565573 shared/install: log syntax error for invalid DefaultInstance= d2471109d999 shared/install: provide a nicer error message for invalid WantedBy=/Required= values
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I am not sure if this has ever worked, but uvesafb is a really
outdated (VBE from the 1990s), awkward (needs v86d) and limited
(no support for high resolutions) way to do it.
The specific reason 640x480-32 was introduced (ages ago) was
to force 32 bit mode with vmware driver, as 16bit had rendering issues.
The modern, supported option is video=... kernel parameter documented here:
https://wiki.archlinux.org/index.php/kernel_mode_setting#Forcing_modes_and_EDID
https://github.com/torvalds/linux/blob/master/Documentation/fb/modedb.rst
which can be passed directly to runqemu and doesn't require special
kernel modules.
Sato under X will continue to use 640x480 as that is hardcoded into
xorg.conf under qemu.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kevin Hao [Thu, 13 Feb 2020 02:31:41 +0000 (10:31 +0800)]
wic: Honor APPEND
APPEND is used to add additional parameters to kernel by features, such
as read-only-rootfs. So we should honor this variable when we compose
the kernel parameter in wic. I know we also can resolve this kind of
issue by using the .wks.in template introduced by commit 42e870c5ed4b
("image_types.bbclass: support template .wks.in files for wic"), but the
APPEND is needed by all the wks, it would seems pretty ridiculous to me
to change all the .wks to .wks.in and then foist the APPEND into them.
So the APPEND is definitely deserved to export to the wic directly.
[Yocto #12809]
Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Mon, 6 Jan 2020 10:30:32 +0000 (18:30 +0800)]
gnupg: Read GNUPG_BINDIR from environment variables for nativesdk
There is already a relocate.patch for native which is used for reading
GNUPG_BINDIR from environment variables, now also enable it for nativesdk.
Otherwise, command like the following one doesn't work for nativesdk:
$ gpg-connect-agent --homedir ../keys/ reloadagent /bye
gpg-connect-agent: no running gpg-agent - starting '/opt/path/to/sysroots/x86_64-wrlinuxsdk-linux/usr/bin/gpg-agent'
gpg-connect-agent: failed to start agent '/opt/path/sysroots/x86_64-wrlinuxsdk-linux/usr/bin/gpg-agent': No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we now have an example recipe on meta-skeleton to
build baremetal applications using OpenEmbedded, a user
produced SDK should be able to run such application.
Include nativesdk-qemu on TOOLCHAIN_HOST_TASK so its
built inside the newlib based SDK.
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandro@enedino.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we now have an example recipe on meta-skeleton to
build baremetal applications using OpenEmbedded, a user
produced SDK should be able to run such application.
Include nativesdk-qemu on TOOLCHAIN_HOST_TASK so its
built inside the baremetal based SDK.
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandro@enedino.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This error handling didn't work as expected since upon failure it would
inject bytestreams back into the code leading to tracebacks.
Instead, ignore the decode errors. Fixes:
Traceback (most recent call last):
File "/home/pokybuild/yocto-worker/a-full/build/scripts/resulttool", line 78, in <module>
sys.exit(main())
File "/home/pokybuild/yocto-worker/a-full/build/scripts/resulttool", line 72, in main
ret = args.func(args, logger)
File "/home/pokybuild/yocto-worker/a-full/build/scripts/lib/resulttool/store.py", line 70, in store
resultutils.save_resultsdata(results, tempdir, ptestlogs=True)
File "/home/pokybuild/yocto-worker/a-full/build/scripts/lib/resulttool/resultutils.py", line 178, in save_resultsdata
f.write(sectionlog)
TypeError: write() argument must be str, not bytes
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 14 Feb 2020 18:13:14 +0000 (18:13 +0000)]
populate_sdk_ext: We now require python3, not python
We no longer expect a "python" binary in PATH so update the eSDK's
expectations to match. This was the only failure on autobuilder test
systems with python missing.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wang Mingyu [Wed, 12 Feb 2020 18:35:06 +0000 (10:35 -0800)]
ruby: upgrade 2.6.5 -> 2.7.0
0003-configure.ac-check-finite-isinf-isnan-as-macros-firs.patch
Removed since it is included in 2.7.0.
refresh the following patch:
0002-Obey-LDFLAGS-for-the-link-of-libruby.patch
add the following patch to solve build error:
0001-Modify-shebang-of-libexec-y2racc-and-libexec-racc2y.patch
[error message]
ERROR: ruby-2.7.0-r0 do_package_qa: QA Issue:
/usr/lib/ruby/gems/2.7.0/gems/racc-1.4.16/bin/y2racc contained in
package ruby requires /usr/local/bin/ruby, but no providers found in
RDEPENDS_ruby? [file-rdeps]
format of file COPYING is updated.
LEGAL notice information is updated.
Signed-off-by: Wang Mingyu <wangmy@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nathan Rossi [Fri, 14 Feb 2020 05:59:43 +0000 (05:59 +0000)]
glibc-testsuite: Remove the do_install task
This task is not intended to be run as this recipe does not produce any
packages or install any sysroot content. Additionally running this task
behaves differently from a normal glibc build, and can result in issues.
[YOCTO #13737]
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 14 Feb 2020 12:50:18 +0000 (12:50 +0000)]
staging: Handle races between binaries and their libs
There is a long standing issue where a binary could be installed into the
sysroot before its library dependencies. We've always argued nothing should
use the binary until it has been installed by a dependency but there are issues
around binaries which conflict with the host system, for example patch,
python3, gzip and more.
With the recent patch changes we've seen issues like:
ERROR: gdb-cross-canadian-powerpc-8.3.1-r0 do_patch: Command Error: 'quilt --quiltrc /home/pokybuild/yocto-worker/qemuppc/build/build/tmp/work/x86_64-nativesdk-pokysdk-linux/gdb-cross-canadian-powerpc/8.3.1-r0/recipe-sysroot-native/etc/quiltrc push' exited with 0 Output:
Applying patch 0009-Change-order-of-CFLAGS.patch
patch: /lib64/libattr.so.1: version `ATTR_1.3' not found (required by patch)
Patch 0009-Change-order-of-CFLAGS.patch does not apply (enforce with -f)
which is a symptom of this issue (libattr-native is a dependency of patch-native).
There are other ways to fix this such as disabling libattr in patch, installing
patch to a subdirectory and requiring PATH manipulation and so on.
We can simply fix the staging code to handle /bin/ after everything else so
do that and avoid all these other complications.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jeremy Puhlman [Mon, 10 Feb 2020 21:29:26 +0000 (13:29 -0800)]
binutils: additional patch should be added with space.
If an append adds a patch or file with SRC_URI += , the spaceless
append causes the file listings to concatinate and cause failures
in the nativesdk-binutils parse/build.
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alex Kiernan [Wed, 12 Feb 2020 11:33:36 +0000 (11:33 +0000)]
kernel-fitimage: fix devicetree reproducibility
Ensure that the order of dtb/dtbo files in the generated fitimage is
reproducible.
Fixes: 71bfa9838cbf ("kernel-fitimage: Handle overlays in EXTERNAL_KERNEL_DEVICETREE") Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
He Zhe [Wed, 12 Feb 2020 07:35:57 +0000 (15:35 +0800)]
linux-yocto-dev: Add paravirt_kvm support for qemux86-64
This feature includes paravirtualized KVM guest support, including
KVMCLOCK for enhancing clock accuracy of guest OS. With it we can prevent
the following error.
"clocksource: timekeeping watchdog on CPU3: Marking clocksource 'tsc' as
unstable because the skew is too large"
Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yi Zhao [Wed, 12 Feb 2020 06:24:40 +0000 (14:24 +0800)]
python3: install _tkinter.*.so to python3-tkinter package
When enable PACKAGECONFIG[tk], we should install _tkinter.*.so to
python3-tkinter package rather than python3-misc package.
Fixes:
ERROR: python3-3.8.1-r0 do_package_qa: QA Issue:
/usr/lib/python3.8/lib-dynload/_tkinter.cpython-38-x86_64-linux-gnu.so
contained in package python3-misc requires libtk8.6.so()(64bit), but no
providers found in RDEPENDS_python3-misc? [file-rdeps]
Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joshua Watt [Wed, 12 Feb 2020 03:14:35 +0000 (21:14 -0600)]
oeqa: reproducible: Run diffoscope on saved output
If there are differing packages and they are being saved for review,
automatically run diffoscope on them and include the output in the saved
output. The output is currently done in HTML format since these are
typically published on a webpage by the autobuilder.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 14 Feb 2020 08:25:18 +0000 (08:25 +0000)]
diffoscope: Exclude from musl builds
Various dependencies don't build for musl so exclude this recipe too, at
least for now until the issues are resolved to avoid build failures in
world builds.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the official release for Wayland 1.18. The main new features in
this release are:
- Add support for the Meson build system (autotools is still supported
but will be removed in a future release)
- Add API to tag proxy objects to allow applications and toolkits to
share the same Wayland connection
- Track wayland-server timers in user-space to prevent creating too
many FDs
- Add wl_global_remove, a new function to mitigate race conditions with
globals
https://lists.freedesktop.org/archives/wayland-devel/2020-February/041207.html
2 upstreamed patches are dropped.
Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Thu, 13 Feb 2020 08:21:59 +0000 (00:21 -0800)]
binutils: Bail out if gold is used on 32/64 bit RISC-V
gold is not supporting risc-v yet and, this will cause subltle errors
during build e.g. autoconf not finding certain features like visibility
and it could take a while to unwind the problem. Its better to error out
early
Remove dwp and ld.gold for rv32 as well
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Thu, 13 Feb 2020 08:21:58 +0000 (00:21 -0800)]
crosssdk: Set nativesdk specific distro features
Currently, normal distro features e.g. ld-is-gold is impacting
crosssdk recipes, which actually should not be the case, since
that feature is essentially intended for target packages and not
nativesdk packages
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Thu, 13 Feb 2020 08:21:51 +0000 (00:21 -0800)]
oeqa: Use --disable-maintainer-mode configure option
since the versions of autotools might differ on target and build host, plus difference in
timestamps for configure and system can result in reconfigure lets avoid
that by disabling maintainer mode
Avoids
error: newly created file is older than distributed files!
[YOCTO #13779]
Suggested-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since its a 32bit kernel 4010000000 address is truncated to 10000000 and ends up
in conflicts with VIRT_PCIE_MMIO, which ranges from 0x10000000 to 0x3efeffff
This is happening because the linux-yocto kernel is not compiled with
LPAE support, however, virt machine for qemuarm assumes that by default
Should LPAE be enabled by default in kernel config is a separate
question
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yeoh Ee Peng [Fri, 31 Jan 2020 05:47:42 +0000 (13:47 +0800)]
scripts/lib/resulttool/report: Enable report selected test case result
Enable reporting selected test case result given the user provided
the selected test case id. If both test result id and test case id
were provided, report the selected test case result from the
selected test result id.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The python3native.bbclass set PYTHON_{LIBRARY, INCLUDE_DIR} pointing to
python target build, a patch was add to use target _sysconfigdata too [1]
but is not available without python3 dependency.
Fixes waffle build when trying to find _sysconfigdata module,
...
| Program python3 found: YES (/home/anibal.limon/linaro/oe-rpb-master/build-410c/tmp-rpb-glibc/work/aarch64-linaro-linux/waffle/1.6.0-r0/recipe-sysroot-native/usr/bin/python3-native/python3)
|
| meson.build:36:0: ERROR: <ExternalProgram 'python3' -> ['/home/anibal.limon/linaro/oe-rpb-master/build-410c/tmp-rpb-glibc/work/aarch64-linaro-linux/waffle/1.6.0-r0/recipe-sysroot-native/usr/bin/python3-native/python3']> is not a valid python or it is missing setuptools
|
| A full log can be found at /home/anibal.limon/linaro/oe-rpb-master/build-410c/tmp-rpb-glibc/work/aarch64-linaro-linux/waffle/1.6.0-r0/build/meson-logs/meson-log.txt
| WARNING: exit code 1 from a shell command.
...
Mark Hatle [Fri, 7 Feb 2020 17:43:37 +0000 (11:43 -0600)]
populate_sdk_base: if the SDKIMAGE_FEATURES changes, refresh the SDK
Since the features are processed by a python fragment, we need to explicitly
list the variables that should affect the resulting hash, and thus sstate
re-use.
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alex Kiernan [Fri, 31 Jan 2020 16:24:42 +0000 (16:24 +0000)]
kernel-fitimage: Handle overlays in EXTERNAL_KERNEL_DEVICETREE
When using EXTERNAL_KERNEL_DEVICETREE, collect DTB overlays too (*.dtbo)
as well as iterating down into sub-directories so using the behaviour
for naming which matches KERNEL_DEVICETREE.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kevin Hao [Sat, 8 Feb 2020 12:36:42 +0000 (20:36 +0800)]
xserver-nodm-init: Fix the start failure for non-root user
In order to start the xserver, a non-root user should have the
cap_sys_admin capability to set the drm master. We try to get
the cap_sys_admin capability by setting it in both the thread
and file inheritable set. The side effect of this is that we
would have to add the "pam" to the distro features if we want
use the xserver-nodm-init for a non-root user.
[Yocto #11526]
Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
testimage: Extend runtime testing infrastructure to allow unconventional booting processes to be tested
The current runtime infrastructure contains hardcoded values which Ill refer to
as patterns, these patterns are either searched through or sent via the serial
terminal to communicate between HOST and TARGET.
These patterns are required since they allow us to check when a device has
finished booting, to log in, and to check whether a command sent from our tests
has returned, this way we are able to check both the status of the commands that
were sent along with its output.
The testing process goes somewhat as follows:
1. Launch QEMU and start booting.
2. Check when the device has booted by looking for the pattern login:.
3. Log in as the root user (default for our images).
4. Check that we were able to log in succesfully.
5. Start running the runtime test cases defined by TEST_SUITES.
6. One of such test cases could send a command to the QEMU target.
7. Check whether that command returned.
8. Check its output and status, return whether the test case passed or failed.
This patch allows this set of patterns to be defined instead of being hardcoded,
but it also automatically sets the defaults that we have been using in the past
if they have not been manually defined, for this reason, the patch is less
invasive and should not affect in any way how tests are currently being run.
Cases that can be enabled with this patch:
- A customized image that does not use the root user (or maybe we want to check
what happens if we dont use the root user).
- An image where the PS1 env variable has been modified, and the prompt pattern
wouldnt match the default.
- Baremetal applications, which do not follow the conventional way of booting
Linux and would probably not show a prompt for a user to log in, same applies
for testing bootloaders.
- poky-tiny: Using DISTRO=poky-tiny and an image such as the core-image-tiny
from meta-intel, which boots directly to RAM, and does not show a log in prompt
since it does not contain a conventional init process.
The code itself contains comments that should be self explanatory but here is an
example on how these patterns can be defined in a hypothetical case where we
want to run test cases as the webserver user instead:
The variable TESTIMAGE_BOOT_PATTERNS defines which patterns to override when
used to communicate with the target when booting, anyone familiar with the
PACKAGECONFIG syntax should have no trouble setting these.
Other patterns would still be set up as default, e.g.
search_reached_prompt would still be login:
The accepted flags for TESTIMAGE_BOOT_PATTERNS are the following:
search_reached_prompt, send_login_user, search_login_succeeded,
search_cmd_finished.
They are prefixed with either search/send, to differentiate if the pattern is
meant to be sent or searched to/from the target terminal.
A working example of this code that falls under the baremetal case mentioned
above along with a test case is present on the meta-freertos layer, which tests
an RTOS image built with OpenEmbedded and automatically runs a test case on it
after booting such image:
As usual, INHERIT += "testimage" needs to be present on local.conf
$ bitbake freertos-demo -c testimage
RESULTS:
RESULTS - freertos_echo.FreeRTOSTest.test_freertos_echo: PASSED (2.00s)
SUMMARY:
freertos-demo () - Ran 1 test in 2.006s
freertos-demo - OK - All required tests passed (successes=1, skipped=0,
failures=0, errors=0)
testimage: Allow testing on QEMU machines with a single serial port
commmit 6cde67d0a84 enables the use of qemurunner on machines that
only have a single serial port, but still sets the default value
as serial_ports=2 if not provided.
The testimage class does not call qemurunner with a serial_ports
argument, hence always defaulting to two.
Pass the serial_ports argument from the testimage class to allow
tests to run on QEMU machines with a single serial port.
Signed-off-by: Alejandro Hernandez Samaniego <alejandro@enedino.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alex Kiernan [Thu, 6 Feb 2020 16:48:13 +0000 (16:48 +0000)]
systemd: upgrade 243.4 -> 244.1
Drop 0002-use-lnr-wrapper-instead-of-looking-for-relative-opti.patch a
variant on which was introduced in 2c1047310970 ("Upgrade to systemd
211+") in 2014. The oldest supported build machine is now CentOS 7 which
has --relative support in ln, so there no longer appears to be any need
for this change.
Rebase/refresh musl patches:
- replace missing.h with specific missing_... header
- fix additional WRITE_STRING_FILE_DISABLE_BUFFER
- fix more places that need netinet/if_ether.h
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
