Scott Rifenbark [Thu, 20 Jan 2011 18:13:32 +0000 (10:13 -0800)]
documentation/yocto-project-qs/yocto-project-qs.xml: Updated list introducing pre-built section
The section that introduces the using a pre-built binary section needed
more items in the list. I added text for setting up the environment
and for starting QEMU.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I added the exact architecture strings for each of the five supported
architectures as part of the /opt/poky/environment-setup.... commands
resulting from installing the toolchain tarballs.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
ExtUtils::Embed ccopts is getting the host's -I/usr/local/include and
using it to compile perf, which results in a compilation error that
started appearing just recently.
This turns the code that makes use of ExtUtils::Embed off and simply
hard-codes NO_LIBPERL.
It does the same for LIBPYTHON while we're at it, since it probably
suffers from a similar underlying problem and just by chance hasn't
broken anything yet.
This will be re-enabled after I familiarize myself with the perf
recipe and am able to create a proper fix.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Joshua Lock [Tue, 25 Jan 2011 12:41:51 +0000 (12:41 +0000)]
util-linux: tidy up metadata
Apply a couple of best practices to the recipe:
1) use the gettext class to ensure the right versions of gettext are
used for the recipe variants (target, native, etc).
2) use layout variables rather than absolute paths in the package FILES_
definitions.
Richard Purdie [Tue, 25 Jan 2011 12:22:21 +0000 (12:22 +0000)]
sanity/sstate: Due to the sysroot layout changes, the toolchain bootstrap process changes and the recent pseudo bug, bump the tmpdir layout version number and the sstate version numbers
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yu Ke [Mon, 24 Jan 2011 06:58:26 +0000 (14:58 +0800)]
bb.fetch2: add "BB_NO_NETWORK" option
Sometime user want a purely local fetching, i.e. using local mirror without
any remote netowrk access. BB_NO_NETWORK option is introduced for this purpose
check_network_access() is the guard for BB_NO_NETWOKR option. it should be
put in any place that fetcher use network access
Yu Ke [Tue, 18 Jan 2011 15:35:30 +0000 (23:35 +0800)]
git.py: split download to download() and build_mirror_data()
the download is to fetch the source from URL, the build_mirror_data is
to create the mirror tar ball. the original go() method mix them together,
it is more clean to split them.
Yu Ke [Tue, 18 Jan 2011 14:41:23 +0000 (22:41 +0800)]
bb.fetch: add fetch version to distinguish bb.fetch and bb.fetch2
there is case that we need to distingush bb.fetch and bb.fetch2,
and use different API for bb.fetch and bb.fetch2. so it is necessary
to add version info for distinguish purpose
Yu Ke [Tue, 18 Jan 2011 14:08:09 +0000 (22:08 +0800)]
bb.fetch2: revise the Fetch.unpack API
change the unpack to use the urldata and rootdir parameter
- urldata is the FetchData instance
- rootdir is the dir to put the extracted source. the original unpack
use current dir (os.getcwd) as destination dir, which is not flexible
and error-prone (error will occur if caller not chdir to dest dir)
Dongxiao Xu [Tue, 18 Jan 2011 08:19:00 +0000 (16:19 +0800)]
emenlow: Change PACKAGE_EXTRA_ARCHS and BASE_PACKAGE_ARCH to core2
After machine specific sysroot is implemented, emenlow and atom-pc
could build together as one architecture. Thus change emenlow
architecture back to core2.
Dongxiao Xu [Tue, 18 Jan 2011 08:18:42 +0000 (16:18 +0800)]
bitbake: machine specific sysroots implementation
This commit changes the sysroots path to be machine specific.
Changes includes:
1) STAGING_DIR_TARGET and STRAGING_DIR_HOST points to machine specific
paths.
2) task stamp files. Adding ${MACHINE} info into stamp files for
do_populate_sysroots and do_package tasks. Add a BB_STAMPTASK_BLACKLIST
to keep native, nativesdk, crosssdk, and cross-canadian stamp unchanged.
3) siteconfig path. Separate the site config path for different machines
to avoid one machine adopting the cache file of another machine.
4) sstate. Add machine name to sstate manifest file.
Change relocation code for sstate paths since sysroot is machine.
Keep native, nativesdk, crosssdk, and cross-canadian unchanged.
5) toolchain scripts. Change the environment path to point to machine
specific sysroots in toolchain scripts bbclass.
6) Relocate la files when populating to a different machine of the same
architecture.
7) Exclude STAGING_DIR_TARGET and STAGING_DIR_HOST parameter from sstate
siginfo since they contain ${MACHINE} information.
Bruce Ashfield [Mon, 24 Jan 2011 16:54:32 +0000 (11:54 -0500)]
linux-yocto: allow multiple BSPs per branch
By default the linux-yocto recipes operate on the current branch
and use it as a trigger to locate the description of a board. This
model works well when using the git repo outside of a build system
since the commands can be simply invoked and will do something
useful. However, it does mean that you can't have two BSPs that
differ only by configuration, building out of a single branch
in the repository.
This means that you must have many branches for very similar
BSPs. This model is still preferred, but having the choice of
branching strategies is better.
With this change we can have multiple BSPs using a single branch
with the preferred description being hinted from the build
system by passing the $machine value to updateme/configme.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Darren Hart [Fri, 21 Jan 2011 21:24:04 +0000 (13:24 -0800)]
send-pull-request: send all patches as the local user
When using sendmail to send patches, patches would appear to be from the
original author as git adds a From: header in the generated patches. This patch
changes this behavior to match that of git-send-email, where the email From:
header is that of the current sender (according to sendmail) and a "From:
Original Author <email>" line is inserted into the body of the message.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Scott Garman [Sat, 22 Jan 2011 00:15:33 +0000 (16:15 -0800)]
send-pull-request: unset $TO and $CC from environment
Darren Hart and I discovered that when $CC is set (which
our meta-toolchain environment script sets up), the value
leaks into the use of this script. Unsetting $TO as well
just to be thorough.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Nitin A Kamble [Fri, 21 Jan 2011 17:52:23 +0000 (09:52 -0800)]
apt: revert the dso_linking_change patch as the new linker fixes it
The newer binutils recipe of version 2.21 has a fix for ld which avoids an
issue where weak symbols like pthread_cancel were causing linking to fail wh
--no-add-as-needed parameter was passed to ld.
See more information here: http://bugs.debian.org/591405
This makes some of the fixes for breakage after gcc dso linking change
unnecessary and this is one of them.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Fri, 21 Jan 2011 17:49:22 +0000 (09:49 -0800)]
libzypp: revert the dso_linking_change patch as the new linker fixes it
The newer binutils recipe of version 2.21 has a fix for ld which avoids an
issue where weak symbols like pthread_cancel were causing linking to fail when
--no-add-as-needed parameter was passed to ld.
See more information here: http://bugs.debian.org/591405
This makes some of the fixes for breakage after gcc dso linking change
unnecessary and this is one of them.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Fri, 21 Jan 2011 01:15:36 +0000 (17:15 -0800)]
libmusicbrainz: revert the dso_linking_change patch as the new linker fixes it
The newer binutils recipe of version 2.21 has a fix for ld which avoids an
issue where weak symbols like pthread_cancel were causing linking to fail when
--no-add-as-needed parameter was passed to ld.
See more information here: http://bugs.debian.org/591405
This makes some of the fixes for breakage after gcc dso linking change
unnecessary and this is one of them.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Dongxiao Xu [Fri, 21 Jan 2011 05:51:11 +0000 (13:51 +0800)]
package_ipk: Do not depend on the existence of "D" to create ipk package
If build from sstate results, the ${D} will not be installed. In this
case the creation of ipk package will be skipped, which will cause
the build failure.
Fix the issue by removing the judgement of ${D} existence.
Dongxiao Xu [Tue, 18 Jan 2011 08:17:58 +0000 (16:17 +0800)]
staging: Use relative path in sysroot-destdir for target recipes
Original we used absolute path in sysroot-destdir for both native and
target recipes. This commit changes target recipes to use relative path
which is same as the image directory.
Darren Hart [Wed, 19 Jan 2011 19:25:43 +0000 (11:25 -0800)]
README.hardware: add beagleboard documentation
Document the install and boot process for the Beagleboard xM with
provisions for the C4. I need someone with a C4 board to validate
the steps.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Tom Zanussi <tom.zanussi@intel.com> CC: Bruce Ashfield <bruce.ashfield@windriver.com> CC: Scott Rifenbark <scott.m.rifenbark@intel.com>
Darren Hart [Wed, 19 Jan 2011 18:17:15 +0000 (10:17 -0800)]
u-boot-omap3: remove in favor of upstream u-boot
This repository is stale, the u-boot_git.bb recipe uses the upstream
repository. Remaining machines using this recipe have already been
converted to using u-boot_git.bb.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Tom Zanussi <tom.zanussi@intel.com> CC: Bruce Ashfield <bruce.ashfield@windriver.com>
Darren Hart [Wed, 19 Jan 2011 18:07:25 +0000 (10:07 -0800)]
u-boot: Add a new upstream u-boot recipe
uboot-omap3 appears to be fairly stale (last commit in April 2010) while
the upstream u-boot is making regular tagged releases. Add a new recipe
using the upstream u-boot repository.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Tom Zanussi <tom.zanussi@intel.com> CC: Bruce Ashfield <bruce.ashfield@windriver.com>
Darren Hart [Tue, 18 Jan 2011 00:33:04 +0000 (16:33 -0800)]
x-load: us TI upstream repository, update recipes accordingly
TI is now maintaining an upstream x-loader git repository and
sakoman will no longer be maintained. Current upstream
includes signGP and incorporates it into the Makefile. The new
Makefile ift target builds the universal MLO binary. The armv7-a
patch is included.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Tom Zanussi <tom.zanussi@intel.com> CC: Bruce Ashfield <bruce.ashfield@windriver.com>
Kevin Tian [Thu, 20 Jan 2011 05:54:51 +0000 (13:54 +0800)]
siggen.py: better print for task hash comparison
current bitbake-diffsigs simply print out the whole 'runtaskdeps' when there's mismatch, which
is not very readable. On the other hand, 'runtaskhashes' comparison is broken which assumes
same key existing in two sides. This commit provides better output by figuring out differences
from addition, removal or hash change.
Scott Garman [Mon, 17 Jan 2011 23:24:58 +0000 (15:24 -0800)]
binutils: Fix QA staging errors for target binutils
* The spurious paths were caused by a -L on commandline which pointed to
build dir. So we dont use -L <wordir> -liberty instead use the
libiberty.a directly on commandline effects are same but .la does not
have the workdir path in deplibs
Patch obtained from OpenEmbedded, written by Khem Raj.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Scott Garman [Tue, 21 Dec 2010 22:17:58 +0000 (14:17 -0800)]
autotools.bbclass: libtool sysroot support changes
We do not do it for native recipes, as the native compiler should
fall back to a prefix of /usr and not solely depend on the sysroot.
Otherwise we end up staging everything in the native sysroot before
we start to build target recipes.
Also remove la mangling code, which is no longer necessary.
Commit derived from Khem Raj's OE commits.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Scott Garman [Wed, 12 Jan 2011 07:20:02 +0000 (23:20 -0800)]
libtool: fix library RPATHs
Enabling sysroot support exposed a bug where the final library
had an RPATH encoded into it which still pointed to the sysroot.
This works around the issue until it gets sorted out upstream.
Fix suggested by Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Scott Garman [Tue, 21 Dec 2010 18:46:15 +0000 (10:46 -0800)]
libtool: Changes to enable sysroot support
* Added OE patches by Khem Raj which enable sysroot support
and rename the command line option --with-sysroot to
--with-libtool-sysroot to avoid conflicts with binutils and
gcc
* Removed obsolete cross_compile.patch
* Changed SRC_URI_append to SRC_URI +=
* PR bump for all recipes
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Zhai Edwin [Sat, 15 Jan 2011 08:32:15 +0000 (16:32 +0800)]
qemu: Upgrade from 0.12.4 to 0.13.0
Patch status:
-- Removed --
arm-cp15-fix.patch
arm_timer-fix-oneshot-mode.patch
arm_timer-reload-timer-when-enabled.patch
cursor-shadow-fix.patch
-- They are already in upstream or some new changes make them useless.
-- Added --
parallel_make.patch: Fix "make -j(>=6)" failure
wacom-tablet-fix.patch: Fix seg fault of usb tablet.
port92_fix.patch: Fix boot failure on ppc due to port 0x92 conflict.
Dongxiao Xu [Thu, 20 Jan 2011 04:54:48 +0000 (12:54 +0800)]
meta-environment: Remove the recursive dependency on do_compile
It is not needed to have dependency on each do_compile of its recursive
depend tasks.
This problem is triggered by building meta-toolchain-sdk from prebuilt
result. Some packages like quilt-native, which is already been populated
and packaged by do_populate_sysroot_setscene and
do_package_write_xxx_setscene, however this recursive dependency of
do_compile triggers the tasks flow of "do_setscene --> do_fetch -->
do_unpack --> ..." again and do_setscene removes all the quilt-native
files, making the other recipes failed while do_patch.
Thanks for Kevin's help in root causing this issue.
CC: Lianhao Lu <lianhao.lu@intel.com> Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Take a real world testcase where you have two recipes, each of which
contains PACKAGES_DYNAMIC = "gdk-pixbuf-loaders-*" and recipes which
RDEPEND on some gdk-pixbuf-loaders-xxx package. To select between these
you need to set a PREFERRED_PROVIDER.
These are specified in the PN namespace so the locgical conclusion is
that setting PREFERRED_PROVIDER_gdk-pixbuf = "gtk+" should work. It
doesn't and instead checks crazy things.
The code was correctly finding the two possible providers, gtk+ and
gdk-pixbuf. It was however only accepting PREFERRED_PROVIDER_gtk+
= "gdk-pixbuf" to resolve this problem which reads as the exact
opposite to what was wanted.
This patch changes the code to do something that makes sense. I suspect
that before these changes it was pretty much a null operation rubber
stamping the single provider case. For Poky at least it exposes a few
cases where -nativesdk recipes were providing the same things as their
normal counterparts but these are genuine bugs in the metadata.
I've also attempted to make the multiple provider error message human
readable as I counldn't understand it and I doubt anyone else could
either.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nitin A Kamble [Thu, 20 Jan 2011 00:41:01 +0000 (16:41 -0800)]
apt: fix build issue with gcc dso linking change
All the libraries needs to be specified explicitely with the new gcc dso
linking change patch. This was causing build errors for this
recipe. Specifying the libpthread library explicitely for linking to work
without errors.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Wed, 19 Jan 2011 17:19:27 +0000 (09:19 -0800)]
zypper: fix build issue with gcc dso linking change
All the libraries needs to be specified explicitely with the new gcc dso
linking change patch. This was causing build errors for this
recipe. Specifying the libpthread library explicitely for linking to work
without errors.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Wed, 19 Jan 2011 01:21:41 +0000 (17:21 -0800)]
libzypp: fix build issue with gcc dso linking change
All the libraries needs to be specified explicitely with the new gcc dso
linking change patch. This was causing build errors for this
recipe. Specifying the libpthread library explicitely for linking to work
without errors.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
