Armin Kuster [Wed, 1 Mar 2017 03:48:30 +0000 (19:48 -0800)]
tzcode-native: update to 2017a
Changes to code
zic no longer mishandles some transitions in January 2038 when it
attempts to work around Qt bug 53071. This fixes a bug affecting
Pacific/Tongatapu that was introduced in zic 2016e. localtime.c
now contains a workaround, useful when loading a file generated by
a buggy zic. (Problem and localtime.c fix reported by Bradley
White.)
zdump -i now outputs non-hour numeric time zone abbreviations
without a colon, e.g., "+0530" rather than "+05:30". This agrees
with zic %z and with common practice, and simplifies auditing of
zdump output.
zdump is now buildable again with -DUSE_LTZ=0.
(Problem reported by Joseph Myers.)
zdump.c now always includes private.h, to avoid code duplication
with private.h. (Problem reported by Kees Dekker.)
localtime.c no longer mishandles early or late timestamps
when TZ is set to a POSIX-style string that specifies DST.
(Problem reported by Kees Dekker.)
date and strftime now cause %z to generate "-0000" instead of
"+0000" when the UT offset is zero and the time zone abbreviation
begins with "-".
Changes to documentation and commentary
The 'Theory' file now better documents choice of historical time
zone abbreviations. (Problems reported by Michael Deckers.)
tz-link.htm now covers leap smearing, which is popular in clouds.
Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Marek Vasut [Tue, 28 Feb 2017 19:41:10 +0000 (20:41 +0100)]
u-boot: Fix handling of CMD_LICENSE in u-boot-mkimage
Only ever change the CMD_LICENSE in the u-boot config if it is enabled
to prevent corruption of the config file. In case the CMD_LICENSE was
already disabled, the sed substitution inserted another "# " in front
of the CMD_LICENSE which triggered a restart of Kconfig oldconfig and
failed the build.
Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ming Liu [Fri, 24 Feb 2017 11:57:31 +0000 (12:57 +0100)]
guile: fix a bashism
A following flaw was detected by verify-bashisms script:
......
meta/recipes-devtools/guile/guile_2.0.13.bb
possible bashism in guile_cross_config line 94 ($'...' should be "$(printf '...')"):
Nathan Rossi [Tue, 21 Feb 2017 13:17:28 +0000 (23:17 +1000)]
libgpg-error: Don't replace the syscfg header for mingw32
For mingw32 targets do not attempt to replace the
syscfg/lock-obj-pub.*.h as for mingw32 there are no arch specific
headers that are included in the libgpg-error source.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jussi Kukkonen [Tue, 28 Feb 2017 09:26:56 +0000 (11:26 +0200)]
mesa: Upgrade 13.0.4 -> 17.0.0
17.0.0 is considered a development release: 17.0.1 is expected to be
the first stable in this series. Typically the .1 release comes about
two weeks after .0.
* New feature release with lots of changes
* Versioning change (17 as in 2017, no longer relates to GL bumps)
* OpenGL 4.5 support on Haswell
* mesa now implements its own sha1 instead of having 5
configurable sha-providers
* Remove libxvmcsoftpipe packaging, the library hasn't
existed since 2013
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Mikko Rapeli [Wed, 1 Mar 2017 09:08:47 +0000 (11:08 +0200)]
buildhistory.bbclass: use tabs as separator in installed-package-sizes.txt
All other fields are separated by tabs except KiB and binary package
name. This helps users, *cough managers*, who import this file into
MS Excel to calculate file system usage summaries.
Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de> Signed-off-by: Ross Burton <ross.burton@intel.com>
kernel.bbclass: Give sanity check function an opt-out variable
Having no opt-out method and adding the task to linux-yocto.inc was
causing issues. For example, linux-yocto-dev would often fail because
it uses AUTOREV with no way to dynamically change the PV.
Add a variable to turn off the sanity check, allowing an easy opt out,
and set the opt-out variable in linux-yocto-dev, fixing the issue with
AUTOREV.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Nathan Rossi [Tue, 21 Feb 2017 13:17:28 +0000 (23:17 +1000)]
package.bbclass: Add SHLIB detection support for mingw targets
Add support to detect dll files as shared objects as well as process
Windows .dll and .exe files to determine the runtime libraries
dependencies.
This implementation is sufficient to detect and map runtime library
dependencies between packages. And does not implement any version naming
conventions that might apply for .dll files (e.g. lib*-x.dll).
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Nathan Rossi [Tue, 21 Feb 2017 13:17:28 +0000 (23:17 +1000)]
update-alternatives.bbclass: Disable for mingw32 targets
When building for mingw32 targets (e.g. nativesdk cross compiling for
windows), disable the dependency on update-alternatives as the Windows
platform does not support symlinks or package management.
This avoids the complex (partly non-buildable for mingw32) dependency
chain virtual/update-alternatives -> opkg-utils -> python -> ...
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Andre McCurdy [Fri, 27 Jan 2017 22:29:10 +0000 (14:29 -0800)]
bitbake.conf: replace USE_LDCONFIG with new "ldconfig" distro feature
USE_LDCONFIG could previously be set to 0 by distros which do not
require ldconfig or ld.so.conf on the target. Since more and more
recipes may need to respect that option, replace the ad-hoc variable
with a distro feature.
Aníbal Limón [Mon, 20 Feb 2017 21:12:49 +0000 (15:12 -0600)]
yocto-compat-layer.py: Add script to YP Compatible Layer validation
The yocto-compat-layer script serves as a tool to validate the alignament
of a layer with YP Compatible Layers Programme [1], is based on an RFC
sent to the ML to enable automatic testing of layers [2] that wants to
be YP Compatible.
The tool takes an layer (or set of layers) via command line option -l
and detects what kind of layer is distro, machine or software and then
executes a set of tests against the layer in order to validate the
compatibility.
The tests currently implemented are:
common.test_readme: Test if a README file exists in the layer and isn't
empty.
common.test_parse: Test for execute bitbake -p without errors.
common.test_show_environment: Test for execute bitbake -e without errors.
common.test_signatures: Test executed in BSP and DISTRO layers to review
doesn't comes with recipes that changes the signatures.
bsp.test_bsp_defines_machines: Test if a BSP layers has machines
configurations.
bsp.test_bsp_no_set_machine: Test the BSP layer to doesn't set
machine at adding layer.
distro.test_distro_defines_distros: Test if a DISTRO layers has distro
configurations.
distro.test_distro_no_set_distro: Test the DISTRO layer to doesn't set
distro at adding layer.
Dmitry Rozhkov [Tue, 21 Feb 2017 15:18:08 +0000 (17:18 +0200)]
scripts/runqemu: avoid overridden user input for bootparams
Currently runqemu hardcodes the "ip=" kernel boot parameter
when configuring QEMU to use tap or slirp networking. This makes
the guest system to have a network interface pre-configured
by kernel and causes systemd to fail renaming the interface
to whatever pleases it:
Feb 21 10:10:20 intel-corei7-64 systemd-udevd[201]: Error changing
net interface name 'eth0' to 'enp0s3': Device or resource busy,
Always append user input for kernel boot params after the ones
added by the script. This way user input has priority over runqemu's
default params.
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Aníbal Limón [Thu, 16 Feb 2017 17:10:30 +0000 (11:10 -0600)]
scripts/runqemu: Add always ttyS1 when no serial options are specified
We always wants ttyS0 and ttyS1 in qemu machines (see SERIAL_CONSOLES),
if not serial or serialtcp options was specified only ttyS0 is created
and sysvinit shows an error trying to enable ttyS1:
INIT: Id "S1" respawning too fast: disabled for 5 minutes
Ed Bartosh [Tue, 21 Feb 2017 15:09:10 +0000 (17:09 +0200)]
wic: add WKS_FILE_DEPENDS variable
This variable should be used to specify dependencies that
will be added to DEPENDS only if wic image build is 'active'
i.e. when 'wic' is in IMAGE_FSTYPES.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Ed Bartosh [Tue, 21 Feb 2017 09:46:29 +0000 (11:46 +0200)]
wic: use image recipe sysroot as default
Switched from using wic-tools recipe sysroot to using
image sysroot in wic script. This way is more logical
and consistent with the way wic uses other artifacts.
[YOCTO #11017]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Ed Bartosh [Tue, 21 Feb 2017 09:37:17 +0000 (11:37 +0200)]
wic: use 2 sysroots to find native executable
Currently there is no way to specify a dependency on native
tools for wic without modifying wic-tools recipe. Obvious
way to make it more flexible is to use image sysroot and
wic-tools together to find an executable.
Modified run_native_cmd to use image and wic-tools sysroots
to find native executable.
[YOCTO #11017]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Ed Bartosh [Thu, 16 Feb 2017 10:53:30 +0000 (12:53 +0200)]
wic: pluginbase: use global dictionary
Made PluginMeta to populate global PLUGINS dictionary that
is accessed by PluginMgr. This should make the code more
understandable as PluginMgr don't need to get data directly
from PlugnMeta attribute.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Ed Bartosh [Wed, 15 Feb 2017 12:58:22 +0000 (14:58 +0200)]
wic: reimplement PluginMgr.get_plugin_methods
Simplified the implementation of get_plugin_methods:
- get rid of looping over the dicrtionary, used access by key instead
- get rid of filling a dictionary that passed as a parameter
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Bruce Ashfield [Mon, 27 Feb 2017 03:10:04 +0000 (22:10 -0500)]
linux-yocto-dev: add virtio fragment for virtio targets
Other linux-yocto recipes have the virtio fragment added to qemu* targets.
If you plan on booting a kernel with qemu, we need these options .. or
things like the virtual disk won't be present.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Mon, 27 Feb 2017 03:10:02 +0000 (22:10 -0500)]
linux-yocto: introduce 4.10 recipes
The 4.10 kernel has been released, so we introduce the linux-yocto
variant.
This version supercedes the 4.4 and 4.8 versions in the tree, leaving us
with 4.1 (LTSI), 4.9 (LTS) and 4.10 (most recent) as the three active
versions.
Build tested against all qemu variants, core-image-kernel-dev + sato,
with musl and glibc as the C libraries.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 3 Mar 2017 11:13:00 +0000 (11:13 +0000)]
populate_ext_sdk: Merge auto.conf into local.conf
auto.conf is included before local.conf. Instead of keeping them separate, merge
them into the extsdk local.conf. As it happens we can do this quite neatly, more
neatly than the current code IMO and it makes the configuration easier for the end
user to understand too.
This means auto.conf is then available for the testsdk code to use for testing
purposes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 3 Mar 2017 10:58:49 +0000 (10:58 +0000)]
testsdk: Drop lockfile usage
We should be able to test sdks in parallel. As far as I can tell, this
restriction crept in for no good reason, based on locks that testimage used
for the non-qemu case.
Therefore remove the lock and allow sdks to test in parallel.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 3 Mar 2017 00:12:49 +0000 (00:12 +0000)]
sanity: Allow whitespace only mirror entries
Forcing the use of "\n" in mirror variables is pointless, we can just require that
there are pairs of values. With the bitbake restriction relaxed, we can relax
the sanity check too.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Thu, 2 Mar 2017 14:16:05 +0000 (14:16 +0000)]
meta-estsdk-toolchain: use WORKDIR instead of D to hold locked-sigs
do_locked_sigs() uses ${D} to hold a file as input to the sstate staging code.
Generally this isn't a problem as it happens after packaging, but sometimes (if
the recipe is rebuild, perhaps) do_package() will see the file inside ${D} and
fail because there is an uninstalled file.
Solve this by using a directory under ${WORKDIR} so it can't be packaged.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 1 Mar 2017 23:07:15 +0000 (23:07 +0000)]
core-image-lsb-sdk: Lower IMAGE_OVERHEAD_FACTOR
We're on the margin of the 4GB size limit for certain image types with
this configuration. This is a temporary workaround to avoid total
failures whilst we figure out better ways to save space. On such a
large image, the standard 1.3 is large and 1.2 is reasonable.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 1 Mar 2017 12:13:50 +0000 (12:13 +0000)]
oeqa/sdkext: don't skip tests if there isn't a toolchain
Skipping the tests if a toolchain wasn't installed out of the box (for example,
a minimal eSDK) doesn't make sense as the first thing the tests should do is
install a toolchain.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 1 Mar 2017 12:21:34 +0000 (12:21 +0000)]
oeqa/sdkext/devtool: use finally instead of repeating cleanup
Use the finally: block to always to cleanup.
Now that the test harness in testsdk.bbclass has monkey-patched
CalledProcessException to display the output we don't need to do that in the
test case.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 1 Mar 2017 15:16:44 +0000 (15:16 +0000)]
oeqa/selftest: Drop http sstate sharing
Using httpServer from python for sharing sstate is known to be buggy, it can't
cope with the number/type of requests coming from bitbake and quietly fails
to share files.
This causes intermittent build failures which are hard to debug. We can
use a file:// url for the sstate mirror instead, removing the need for
the http server.
The sdk-update test is simply dropped since the SDK is never published
to this location and hence it would never have any update. Its equiavalent
to pointing at an empty web server. There is a better eSDK update test in
testsdk so rather than improve this one, lets drop it and concentrate on
the one there.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 1 Mar 2017 14:47:50 +0000 (14:47 +0000)]
populate_sdk_ext: Allow generation of meta-extsdk-toolchain even for minimal SDKs
If you build a minimal eSDK currently, you don't build meta-extesdk-toolchain
even if you will have built most of its dependencies. This means when you try
and install a toolchain into the eSDK, it fails, breaking our automated testing
of the eSDK.
Therefore add the dependency unconditionally even when a minimal eSDK is being
built and allow the automated testing to work.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 1 Mar 2017 14:45:46 +0000 (14:45 +0000)]
oeqa/sdkext/context: Work around broken dependency checks to get sdk tests running
This is admitted a bit of a hack but it does allow a number of significant sdk
tests to run successfully and hence improves testing of eSDK which is good.
I'm therefore proposing we do this until we come up with a better solution
since the current lack of testing is worrying and would have caught other issues
had it been present.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 1 Mar 2017 10:59:13 +0000 (10:59 +0000)]
oeqa/sdkext: Ensure we run a deterministic set of tests
The directory list of sdk tests to run can vary so this code effectively selects
a random set of SDK tests to run in the eSDK. We want to attemp all the SDK tests
so remove the element selection.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 1 Mar 2017 01:13:34 +0000 (01:13 +0000)]
devtool/sdk: Run build-sysroots after installing new things
After running sdk-install we need to ensure that the standalone sysroots are
updated as done when the eSDK is originally built. Add such a call so this
happens automatically and the envrionment scripts in the SDK work correctly
after updates.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 1 Mar 2017 01:12:10 +0000 (01:12 +0000)]
testsdk: Handle minimal eSDK and avoid download costs
When using a minimal eSDK, testing currently fails as the sdk isn't
populated. We therefore setup the eSDK under test to point at local
sstate and execute a command to ensure the toolchain is populated
since most of the tests depend on this being present.
At the same time, add in a link to DL_DIR through own-mirrors so
that tests which fetch source (e.g. the kernel module one) can
use the local stash. This cuts test execution of the kernel module
test from 2000s to 120s.
We did try using DL_DIR directly but that causes uninative issues
requiring other workarounds so own-mirrors is neater.
Together these fixes unbreak eSDK testing on the autobuilder.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jussi Kukkonen [Wed, 22 Feb 2017 14:43:05 +0000 (16:43 +0200)]
weston: Upgrade 1.11.1 -> 2.0.0, separate libweston
* Drop two patches that are upstream. Rebase other patches.
* Separate libweston into its own package, modify the recipe
as needed because files have changed location.
* Remove "--disable-rpi-compositor": the backend does not exist
anymore.
Libweston is already at version 2 and is likely to have new major
versions. The versions should be parallel installable (but weston
itself will not be).
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mariano Lopez [Tue, 21 Feb 2017 18:20:35 +0000 (12:20 -0600)]
insane.bbclass: Add missing dependencies
package_qa task requires some tools installed in sysroot; with
the introduction of recipe specific sysroot this task won't
have such tools installed if it's forced to run.
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ming Liu [Sun, 26 Feb 2017 07:44:45 +0000 (08:44 +0100)]
generate-manifest-3.5.py: add logic to generate native manifest
python3-native supposes to RPROVIDE all native packages as added in
generate-manifest-3.5.py, but it does not so far, this leads a problem
that sometimes bitbake cant find a runtime provider for a python3-*-native
when a new runtime dependency on it being required, this usualy happens
after a new native python3-* recipe is created or the old native python3-*
recipes are upgraded.
To avoid manually extending RPROVIDE every time when a new runtime
dependency is introduced, an argument '-n/--native' is added to the
manifest generator, allowing it create a native python3 manifest, with a
RPROVIDE line only, the RPROVIDE should contain all the sub-packages.
The generated python-native-3.5-manifest.inc is also added which is
included by python3-native recipe.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ming Liu [Sun, 26 Feb 2017 07:39:19 +0000 (08:39 +0100)]
generate-manifest-2.7.py: add logic to generate native manifest
python-native supposes to RPROVIDE all native packages as added in
generate-manifest-2.7.py, but it does not so far, this leads a problem
that sometimes bitbake cant find a runtime provider for a python-*-native
when a new runtime dependency on it being required, this usualy happens
after a new native python-* recipe is created or the old native python-*
recipes are upgraded.
To give a example, the following commit is trying to address such a issue:
commit 4583cd1bb15306e8f0ab7bcd80732e6f35aa4533:
[ python-native: Make python-native also RPROVIDE python-unittest-native ]
To avoid manually extending RPROVIDE every time when a new runtime
dependency is introduced, an argument '-n/--native' is added to the
manifest generator, allowing it create a native python manifest, with a
RPROVIDE line only, the RPROVIDE should contain all the sub-packages.
The generated python-native-2.7-manifest.inc is also added which is
included by python-native recipe.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Humberto Ibarra [Mon, 27 Feb 2017 16:49:09 +0000 (10:49 -0600)]
oelib/buildhistory.py: Add unittest for buildhistory_analysis
The buildhistory_analysis module (in which buildhistory-diff is
based) was lacking unittest for its functions. Created selftest
module for this and a few testcases to cover basic cases.
[YOCTO #10727]
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Mariano Lopez [Mon, 27 Feb 2017 07:45:01 +0000 (07:45 +0000)]
oeqa/core/loader.py: Avoid importing tests with built-ins name
If importing a test with the same name as a built-in module,
it will silently import the built-in and check for tests in
built-in module. This happened with syslog module in debian
based machines, so add a raise to avoid this behavior.
[YOCTO #10978]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Mariano Lopez [Tue, 21 Feb 2017 14:33:08 +0000 (14:33 +0000)]
selftest: Optimize get_bb_var use
get_bb_var calls bitbake every time it is used and every call
would take about 7 seconds. There are tests that calls get_bb_var
several times when they can use get_bb_vars. Also there are tests
that calls it to fetch the same variable over and over again.
This will optimize the use of get_bb_var and get_bb_vars for a
little speed up in the tests.
[YOCTO #11037]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
