Richard Purdie [Tue, 4 Nov 2014 11:39:08 +0000 (11:39 +0000)]
gdb: 7.7.1 -> 7.8.1
Drop patch merged upstream.
Also drop old arm/thumb patch which breaks the compile on arm. We've
had this since 2010 (or longer) and the issue has likely been fixed
upstream by now. If not someone with more knowledge will need to
figure out the fix against the current codebase.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 5 Nov 2014 18:43:03 +0000 (18:43 +0000)]
base: Make PRINC warning an error
Apparently 1.5 years of warnings isn't enough to get anyone to take any
notice. We therefore make this an error so people can ignore it for
another 6 months whereafter we can finally give up and remove the
obsolete code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 5 Nov 2014 18:49:03 +0000 (18:49 +0000)]
perl: Enable rebuilds to account for configuration changes
If configure/compile was rerun for perl, changes such as libdir changes
were not being picked up. To fix this we we add "make clean"
functionality, if the makefile is present.
We also in this case need to delete the .so file, else some perl modules
try and load the target arch libraries leading to build failures. I'd
love it if there were a better way to do this and am open to better
proposals but this was the best I could find, not being a perl expert.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out we have quite a number of Makefiles out there without a
clean target. Rather than have all cases code an empty do_configure, add
a CLEANBROKEN variable which when set to "1" will disable the attempt to
"make clean".
This patch also adjusts various recipes which either have this problem
fixed, or have been reported to have make clean failures.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bump SRCREV to 20140828 tag
drop automake-foreign patch - fixed upstream (commit 18594de and edbae29)
add add-know-for-tirpc patch - workaround ftbfs with libtirpc found
update realtime tests fixes upstream status from submitted to backported -
merged upstream
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Peter A. Bigot [Sun, 2 Nov 2014 10:48:37 +0000 (04:48 -0600)]
image_types.bbclass: whitespace and reorder
Use a multi-line value to set IMAGE_TYPES and put all the compressed
versions of a format on one line. Other than moving ext2.lzma this is
just whitespace.
Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Chong Lu [Fri, 31 Oct 2014 03:22:10 +0000 (11:22 +0800)]
gst-plugin-bluetooth: remove systemd service file
The service file should be included in bluez4 package, not in plugin package.
This solves the following warning:
WARNING: QA Issue: gst-plugin-bluetooth: Files/directories were installed but not shipped
/lib
/lib/systemd
/lib/systemd/system
/lib/systemd/system/bluetooth.service [installed-vs-shipped]
Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jackie Huang [Fri, 31 Oct 2014 14:41:49 +0000 (10:41 -0400)]
gcc: backport two patches to fix ICE in dwarf2out_var_location
The first patch fixes the ICE in dwarf2out_var_location, at
dwarf2out.c.
r212171:
* except.c (emit_note_eh_region_end): New helper function.
(convert_to_eh_region_ranges): Use emit_note_eh_region_end to
emit EH_REGION_END note.
* jump.c (cleanup_barriers): Do not split a call and its
corresponding CALL_ARG_LOCATION note.
But it introduced a regression issue:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=63348
so backport the fix for the regression as well:
r215613:
PR rtl-optimization/63348
* emit-rtl.c (try_split): Do not emit extra barrier.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Cristian Iorga [Fri, 31 Oct 2014 17:44:26 +0000 (19:44 +0200)]
connman: upgrade to 1.26
- WiFi P2P support in ConnMan has been significantly improved;
- Applications can now register WiFi Display, UPnP or Bonjour P2P services;
- Various bug fixes.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Wed, 5 Nov 2014 20:34:40 +0000 (20:34 +0000)]
buildtools-tarball: package all of Python
Instead of cherry-picking pieces of Python to put into the buildtools tarball,
ship all of it. We can't predict what bits of Python will be needed in the
future.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chong Lu [Tue, 4 Nov 2014 01:35:18 +0000 (09:35 +0800)]
curl: Security Advisory - curl - CVE-2014-3620
libcurl wrongly allows cookies to be set for Top Level Domains (TLDs), thus
making them apply broader than cookies are allowed. This can allow arbitrary
sites to set cookies that then would get sent to a different and unrelated site
or domain.
Hongxu Jia [Wed, 29 Oct 2014 05:54:51 +0000 (13:54 +0800)]
rootfs.py: tweak inner warn message catching
The fix filters out irrelevant messages, and makes the catching more
accurate, the inner warn message in do_rootfs usually comes from the
output of complementary install, and pattern the format to catch it.
Here is the example of irrelevant messages:
...
|WARNING: log_check: There is a warn message in the logfile
|WARNING: log_check: Matched keyword: [warn]
|WARNING: log_check: `tmp/deploy/rpm/core2_64/pam-plugin-warn
-1.1.6-r5.0.core2_64.rpm' -> `tmp/work/intel_x86_64-wrs-linux/
wrlinux-image-installer/1.0-r0/rootfs/Packages.intel/./core2_64/
pam-plugin-warn-1.1.6-r5.0.core2_64.rpm'
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Hongxu Jia [Wed, 29 Oct 2014 05:54:50 +0000 (13:54 +0800)]
python-smartpm: report warn rather than error during install with --attempt
With the following config and build image:
...
IMAGE_INSTALL_append = "shadow man-pages"
EXTRA_IMAGE_FEATURES += "doc-pkgs"
...
There is an error during install with --attempt, and it breaks the build.
...
|error: file /usr/share/man/man5/passwd.5 from install of
shadow-doc-4.2.1-r0.i586 conflicts with file from package
man-pages-3.71-r0.i586
...
For complementary and 'attemptonly' package processing, we should make sure
the warn rather than error messages reported.
[YOCTO #6769]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Hongxu Jia [Wed, 29 Oct 2014 05:54:49 +0000 (13:54 +0800)]
man-pages/shadow: resolve man pages confliction
Invoke smart/rpm to install man-pages and shadow-doc, there
is a build failure:
...
|error: file /usr/share/man/man5/passwd.5 from install of
shadow-doc-4.2.1-r0.0.core2_64 conflicts with file from
package man-pages-3.70-r0.0.core2_64
|error: file /usr/share/man/man3/getspnam.3 from install of
shadow-doc-4.2.1-r0.0.core2_64 conflicts with file from
package man-pages-3.70-r0.0.core2_64
...
Use alternatives mechanism to fix it.
As README in man-pages said: "Note that sometimes these
pages are duplicates of pages also distributed in other
packages. Be careful not to overwrite more up-to-date
versions. So we set man-pages with lower priority.
[YOCTO #6769]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
The subordinate IDs support in pkg-shadow allows unprivileged users to manage a
set of UIDs and GIDs. These subordinate IDs are specified by root, and can be
further used by the unprivileged user they have been assigned to. This user can
then create an e.g. user namespace, where he is allowed to manage his own set of
users and group from the pool of subordinate IDs. More details can be found at
http://lwn.net/Articles/533617/.
Pull a required change from upstream in order to make shadow cross-compile with
subordinate IDs support. Enable flag in recipe.
Changes since v1:
- update changelog
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Roy.Li [Wed, 29 Oct 2014 06:01:07 +0000 (14:01 +0800)]
iproute2: backport a patch to make adding vxlan link success
If without this patch:
$ ip link add vxlan0 type vxlan id 51 group 238.1.1.1 dev eth0
Error: argument "vxlan0" is wrong: Unknown device
$
With this patch;
$ ip link add vxlan0 type vxlan id 51 group 238.1.1.1 dev eth0
$ ifconfig -a |grep vxlan0
vxlan0 Link encap:Ethernet HWaddr da:61:56:2e:c2:20
$
Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Gary Thomas [Tue, 28 Oct 2014 15:05:47 +0000 (09:05 -0600)]
python-pygtk: Restore pkg-config file
Some previous version of this recipe was errantly removing the pygtk-2.0.pc
(pkg-config) file. This is needed for other packages to be able to build
against this library.
Also update the .pc file to match current pkg-config use (libdir was missing).
Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
SysLogHandler converts message to utf8 and adds BOM, supposedly
to conform with RFC5424, but the implementation is broken:
the RFC specifies that the BOM should prefix only unstructured
message part, but current Python implementation puts it in the
middle of structured part, thus confusing RFC-compliant receivers.
Signed-off-by: yzhu1 <yanjun.zhu@windriver.com> Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jackie Huang [Mon, 27 Oct 2014 07:37:41 +0000 (03:37 -0400)]
license.bbclass: canonicalise the licenses named with 'X+'
If INCOMPATIBLE_LICENSE=GPLv3, GPLv3+ should be excluded
as well but not now since there is no SPDXLICENSEMAP for
licenses named with 'X+', we can add all the SPDXLICENSEMAP
settings for licenses named with 'X+' in licenses.conf,
but it's more like a duplication, so improve the canonical_license
function to auto map for 'X+' if SPDXLICENSEMAP for 'X' is
available, so GPLv3+ becomes GPL-3.0+.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Chong Lu [Fri, 24 Oct 2014 08:26:41 +0000 (16:26 +0800)]
curl: Security Advisory - curl - CVE-2014-3613
By not detecting and rejecting domain names for partial literal IP addresses
properly when parsing received HTTP cookies, libcurl can be fooled to both
sending cookies to wrong sites and into allowing arbitrary sites to set cookies
for others.
Chong Lu [Mon, 27 Oct 2014 05:24:23 +0000 (13:24 +0800)]
kmod: fix debuginfo is missing in shared library
INHIBIT_PACKAGE_STRIP variable will make debuginfo lose in shared library.
The test cases of kmod contain kernel modules for many different architectures,
strip and arch gets confused and throws errors. Pack kernel modules in test
cases to avoid strip command failed.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Mon, 6 Oct 2014 22:09:15 +0000 (23:09 +0100)]
systemd: don't add files and dependencies from units Conflicts
Adding dependencies and moving files based on Conflicts tags in unit files isn't
right, mainly as it means that systemd depends on systemd-binfmt, because the
latter ends up containing the shutdown.target unit.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Barker [Sun, 26 Oct 2014 19:36:22 +0000 (19:36 +0000)]
package_manager: Fix BAD_RECOMMENDATIONS for opkg
In package_manager.py, when using opkg as the packager, the command 'opkg <args>
info <pkg>' is called to get information about each pkg in BAD_RECOMMENDATIONS
in a format that can be written to the status file. The 'Status: ...' line is
modified and all other lines are passed through. Changing the verbosity level
argument for this command will change what it written into the status file.
Crucially, with the default verbosity level, no blank lines are being printed by
the opkg command and so no blank lines are being written to the status file to
separate each package entry.
The package parsing code in opkg expects package entries in the status file to
be separated by at least one blank line. If no blank line is seen, the next
package entry is interpreted as a continuation of the last package entry, but
the new values overwrite the old values.
So with the default verbosity level, a blank line follows some package entries
and these are parsed. The others are dropped due to the lack of blank lines. As
the verbosity increases, more debugging messages add blank lines and more
packages are parsed.
The solution to ensure that this works correctly regardless of the verbosity
level is simply add a blank line after the output of 'opkg info' is written to
the status file, ensuring that the next package is separated from the current
package.
[YOCTO #6816]
Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Cc: Chris Carr <chris.carr@ge.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Johan Hovold [Fri, 24 Oct 2014 15:39:40 +0000 (17:39 +0200)]
udev: fix uevent-helper disable
Make sure that /proc/sys/kernel/hotplug exists before trying to disable
the uevent-helper mechanism.
Since kernel commit 86d56134f1b6 ("kobject: Make support for
uevent_helper optional.") the kernel can be built without uevent-helper
support. In this case /proc/sys/kernel/hotplug does not exist and the
current sysvinit script fails with
/etc/rcS.d/S04udev: line 132: can't create /proc/sys/kernel/hotplug: nonexistent directory
when trying to disable the uevent-helper mechanism during boot.
Note that a single NULL-character has always been sufficient to disable.
Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
BusyBox: Fixing broadcast address is not fed and rightly initialized
When using udhcpc along with ip command(/sbin/ip), broadcast address is not
assigned. Broadcast address is successfully assigned when using udhcpc without
ip command existence.
with ip command:
$ifconfig eth0|grep Bcast
inet addr:128.224.162.141 Bcast:0.0.0.0 Mask:255.255.254.0
$
without ip command:
$ifconfig eth0|grep Bcast
inet addr:128.224.162.141 Bcast:128.224.163.255 Mask:255.255.254.0
$
/etc/udhcp.d/50default[simple.script] is called to set ip address by dhcp
client, In case of ifconfig, it doesn't care of it's existence because it
will automatically calculate broadcast address then assign it if there is
no broadcast option. However in case of ip command, it requires broadcast
address statically.
Signed-off-by: Hu <yadi.hu@windriver.com> Signed-off-by: Roy Li <rongqing.li@windriver.com>
Shan Hai [Fri, 24 Oct 2014 06:05:36 +0000 (14:05 +0800)]
ldconfig-native: fix a endian-ness bug
Some header fields of ELF were read with wrong size on 64bit
big-endian machine, fix it by reading the fields with read64
instead of read32.
Signed-off-by: Par Olsson <Par.Olsson@windriver.com> Signed-off-by: Shan Hai <shan.hai@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
There is a failure to build lib32-meta-toolchain:
...
|ERROR: lib32-packagegroup-core-standalone-sdk-target not found in the base
feeds (qemux86_64 x86 noarch any all).
...
In package_manager.py, the variable 'DEFAULTTUNE_virtclass-multilib-lib32'
is used to process multilib image/toolchain. But for the build of lib32-
meta-toolchain, the value of 'DEFAULTTUNE_virtclass-multilib-lib32' is
deleted. In 'bitbake lib32-meta-toolchain -e', we got:
...
|# $DEFAULTTUNE_virtclass-multilib-lib32 [2 operations]
|# set? /home/jiahongxu/yocto/build-20141010-yocto/conf/local.conf:237
|# "x86"
|# del data_smart.py:406 [finalize]
|# ""
|# pre-expansion value:
|# "None"
...
The commit 899d45b90061eb3cf3e71029072eee42cd80930c in oe-core deleted
it at DataSmart.finalize
...
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Tue May 31 23:52:50 2011 +0100
bitbake/data_smart: Change overrides behaviour to remove
expanded variables from the datastore
...
We add an internal variable 'DEFAULTTUNE_ML_<multilib>', assign it with the
value of 'DEFAULTTUNE_virtclass-multilib-lib32' before deleting.
For rpm backend in package_manager.py, we use DEFAULTTUNE_virtclass-multilib
-lib32 first, if it is not available, and try to use DEFAULTTUNE_ML_<multilib>
[YOCTO #6842]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Hongxu Jia [Wed, 8 Oct 2014 12:16:36 +0000 (20:16 +0800)]
opkg: fix remove pkg with --force-removal-of-dependent-packages failed
opkg remove perl --force-removal-of-dependent-packages
...
Removing package perl-module-extutils-mm-dos from root...
...
Removing package perl-module-extutils-mm-dos from root...
You can force removal of packages with failed prerm scripts with the option:
--force-remove
No packages removed.
Collected errors:
* pkg_run_script: Internal error: perl-module-extutils-mm-dos has a
NULL tmp_unpack_dir.
* opkg_remove_pkg: not removing package "perl-module-extutils-mm-dos",
prerm script failed
...
While remove pkg with '--force-removal-of-dependent-packages',
pkg may be added to remove list multiple times, add status
check to make sure pkg only be removed once.
[YOCTO #6819]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Armin Kuster [Wed, 22 Oct 2014 20:29:14 +0000 (13:29 -0700)]
tzdata: update to 2014i
Changes affecting future time stamps
Pacific/Fiji will observe DST from 2014-11-02 02:00 to
2015-01-18 03:00. (Thanks to Ken Rylander for the heads-up.)
Guess that future years will use a similar pattern.
A new Zone Pacific/Bougainville, for the part of Papua New
Guinea that plans to switch from UTC+10 to UTC+11 on
2014-12-28 at 02:00. (Thanks to Kiley Walbom for the
heads-up.)
Changes affecting time zone abbreviations
Since Belarus is not changing its clocks even though Moscow
is, the time zone abbreviation in Europe/Minsk is changing
from FET to its more-traditional value MSK on 2014-10-26 at
01:00. (Thanks to Alexander Bokovoy for the heads-up about
Belarus.)
The new abbreviation IDT stands for the pre-1976 use of UT+8
in Indochina, to distinguish it better from ICT (UT+7).
Changes affecting past time stamps
Many time stamps have been corrected for Asia/Ho_Chi_Minh
before 1976 (thanks to Trần Ngọc Quân for an indirect pointer
to Trần Tiến Bình's authoritative book). Asia/Ho_Chi_Minh has
been added to zone1970.tab, to give tzselect users in Vietnam
two choices, since north and south Vietnam disagreed after our
1970 cutoff.
Asia/Phnom_Penh and Asia/Vientiane have been turned into
links, as they differed from existing zones only for older
time stamps. As usual, these changes affect pre-1970 time
stamps only. Their old contents have been moved to the
'backzone' file. `
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Armin Kuster [Wed, 22 Oct 2014 20:29:13 +0000 (13:29 -0700)]
tzcode: update to 2014i
Changes affecting code
The time-related library functions now set errno on failure,
and some crashes in the new tzalloc-related library functions
have been fixed. (Thanks to Christos Zoulas for reporting
most of these problems and for suggesting fixes.)
If USG_COMPAT is defined and the requested time stamp is
standard time, the tz library's localtime and mktime functions
now set the extern variable timezone to a value appropriate
for that time stamp; and similarly for ALTZONE, daylight
saving time, and the altzone variable. This change is a
companion to the tzname change in 2014h, and is designed to
make timezone and altzone more compatible with tzname.
The tz library's functions now set errno to EOVERFLOW if they
fail because the result cannot be represented. ctime and
ctime_r now return NULL and set errno when a time stamp is out
of range, rather than having undefined behavior.
Some bugs associated with the new 2014g functions have been
fixed. This includes a bug that largely incapacitated the new
functions time2posix_z and posix2time_z. (Thanks to Christos
Zoulas.) It also includes some uses of uninitialized
variables after tzalloc. The new code uses the standard type
'ssize_t', which the Makefile now gives porting advice about.
Changes affecting commentary
Updated URLs for NRC Canada (thanks to Matt Johnson and Brian
Inglis).
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Yuanjie Huang [Wed, 22 Oct 2014 08:47:57 +0000 (04:47 -0400)]
mtd-utils: Fix alignment trap triggered by NEON instructions
NEON instruction VLD1.64 was used to copy 64 bits data after type
casting, and they will trigger alignment trap.
This patch uses memcpy to avoid alignment problem.
Roy Li [Wed, 22 Oct 2014 08:35:43 +0000 (16:35 +0800)]
python3: do not replace ccache in the middle of a path
Python recipe did a sed s/ccache/$(CCACHE) on the Makefile, which
replaces all "ccache" including ones that consist of a full path.
This leads to build error when building in a project path with
"ccache" in its name. Fix it by only replacing "ccache " with
"$(CCACHE) ".
Same fix on python 2.xx is: 1181112cf65bc[python: do not replace ccache in the ]
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Apache Subversion 1.0.0 through 1.7.x before 1.7.17 and 1.8.x before
1.8.10 uses an MD5 hash of the URL and authentication realm to store
cached credentials, which makes it easier for remote servers to obtain
the credentials via a crafted authentication realm.
The Serf RA layer in Apache Subversion 1.4.0 through 1.7.x before 1.7.18
and 1.8.x before 1.8.10 does not properly handle wildcards in the Common
Name (CN) or subjectAltName field of the X.509 certificate, which allows
man-in-the-middle attackers to spoof servers via a crafted
certificate.<a href=http://cwe.mitre.org/data/definitions/297.html
target=_blank>CWE-297: Improper Validation of Certificate with Host
Mismatch</a>
Hongxu Jia [Thu, 16 Oct 2014 07:16:25 +0000 (15:16 +0800)]
multilib.bbclass: fix incorrect TARGET_VENDOR in multilib image
While building multilib extended images such as libXX-core-image-minimal,
the WORKDIR has the same dir with the building of core-image-minimal.
$ ls tmp/work/qemux86_64-poky-linux/ -al
...
drwxrwxr-x 3 jiahongxu jiahongxu 4096 Oct 13 16:01 core-image-minimal
drwxrwxr-x 3 jiahongxu jiahongxu 4096 Oct 16 11:11 lib32-core-image-minimal
...
While image class is inherited, it did not assign OVERRIDES with
'virtclass-multilib-libXXX', so the reason is variable TARGET_VENDOR was
not override for multilib in that situation.
It refers what did for PN and MLPREFIX, and manually do the multilib
override for TARGET_VENDOR in RecipePreFinalise handler.
[YOCTO #6844]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Fri, 24 Oct 2014 14:22:06 +0000 (15:22 +0100)]
wpa_supplicant: Improve rebuild handling
Due to the split level nature of the wpa_suppliant sources, the standard
clean methods don't work. This change ensures it picks up on changes to
configuration.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 24 Oct 2014 14:20:28 +0000 (15:20 +0100)]
cmake: Try and improve cleaning of builds when B==S
Currently if B==S for a cmake recipe, the build will not reconfigure. This patch adds
code to remove the generated cmake files, meaning cmake will then be forced to regenerate
them. This forces cmake to see configuration changes it may not otherwise see.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 24 Oct 2014 14:17:03 +0000 (15:17 +0100)]
base.bbclass: Enable using 'make clean' for rebuilds
When something rebuilds say due to ${baselib} changing or some
other key variable, software is often not rebuilt due to the
fact that make detects no dependency change.
By running "make clean" when these changes occur, we can at least try
and ensure the correct rebuilds happen. We use the same checksum check as
autotools to decide if things have changed or not.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 24 Oct 2014 14:15:50 +0000 (15:15 +0100)]
autotools: Use make clean for builds not supporting B != S
If the build doesn't support B != S, we can try running "make clean" instead
to try and clean up previous objects if the hash for the task has changed.
This tries to ensure that when variables like ${baselib} change, the changes are
correctly accounted for.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Wed, 29 Oct 2014 22:04:24 +0000 (17:04 -0500)]
wic: Update bootimg-partition to use bootimg_dir
Update bootimg-partition to use bootimg_dir instead of img_deploy_dir,
to match similar usage in other plugins.
As mentioned elsewhere, plugins should use the passed-in value for
bootimg_dir directly if non-null, which corresponds to a user-assigned
value specified via a -b command-line param, and only fetch the value
from bitbake if that value is null.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Wed, 29 Oct 2014 22:04:23 +0000 (17:04 -0500)]
wic: Remove special-case bootimg_dir
The first iterations of wic very shortsightedly catered to two
specific use-cases and added special-purpose params for those cases so
that they could be directly given their corresponding boot artifacts.
(hdddir and staging_data_dir).
As more use-cases are added, it becomes rather obvious that such a
scheme doens't scale, and additionally causes confusion for plugin
writers.
This removes those special cases and states explicitly in the help
text that plugins are responsible for locating their own boot
artifacts.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Wed, 29 Oct 2014 22:04:20 +0000 (17:04 -0500)]
wic: Use overhead factor when creating partitions from rootfs directories
When creating partitions sized to given rootfs directories, filesystem
creation could fail in cases where the calculated target partition
size was too small to contain the filesystem created using mkfs. This
occurred in particular when creating partitions to contain very large
filesystems such as those containing sdk image artifacts.
This same limition is present in the oe-core image creation classes,
which can be readily see by changing IMAGE_OVERHEAD_FACTOR from the
default 1.3 to 1.0 and building a sato-sdk image.
It should be possible to calculate required sizes exactly given the
source rootfs and target filesystem types, but for now, to address the
specific problem users are hitting in such situations, we'll just do
exactly what oe-core does and define and use an IMAGE_OVERHEAD_FACTOR
or 1.3 in those cases.
Fixes [YOCTO #6863].
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Wed, 29 Oct 2014 22:04:19 +0000 (17:04 -0500)]
wic: Don't allow mkfs to fail silently in partition command
The return code from the mkfs command used by the partition creation
command was being ignored, allowing it to silently fail and leaving
users mystified as to why the resulting filesystem was corrupted.
This became obvious when failures occurred when creating large
e.g. sdk filesystems [YOCTO #6863].
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pascal Bach [Fri, 24 Oct 2014 07:41:10 +0000 (09:41 +0200)]
image.py: Fix error in graph sorting
The graph sorting algorithm for image dependencies does a look for an
occurrence of a searched string instead of comparing the chunk to the
searched string. This leads to the problem that ubifs is recognized as ubi aswell.
This fixes this by splitting up the string into chunks.
Signed-off-by: Pascal Bach <pascal.bach@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Peter Seebach [Thu, 23 Oct 2014 21:42:10 +0000 (16:42 -0500)]
multilib.conf: set MULTILIB_GLOBAL_VARIANTS conditionally
It is not entirely obvious that all reasonable configurations
will have multilib.conf strictly before the file which might
want to set MULTILIB_GLOBAL_VARIANTS. The x86-ish values here
look like reasonable default guesses, but shouldn't override
an explicit setting.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 24 Oct 2014 14:14:31 +0000 (15:14 +0100)]
rm_work: Speed up rootfs/populate_sdk removal
Commands like bitbake X -c rootfs or bitbake X -c populate_sdk do not
trigger rm_work to clean up the directories afterwards since it
traditionally hooks onto do_build. This change means those two tasks now
clean up after themselves. We use the cleandirs function attribute to
handle this.
[YOCTO #6413]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 24 Oct 2014 14:10:25 +0000 (15:10 +0100)]
gcc: poison default sysroot path
Various pieces of the code assume that the --sysroot option gets passed
into the compiler tools. By having a "sane" default, we don't always
spot when this occurs and this can later show up as breakage in sstate,
or in usage of the external toolchain.
We've long since talked about poisoning the default such that it will
break unless the correct option is specified. This patch does just that.
If this patch causes something to fail to build, it most likely means
the various compiler flags and commands are not correctly being passed
through to the underlying piece of software and that there is a real
problem that needs fixing, its not the fault of this patch.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds a flexible way to configure the CMake in SDKs. It adds
a toolchain configuration script which supports subscripts for
extensions, as for example Qt5.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Mon, 20 Oct 2014 03:35:41 +0000 (20:35 -0700)]
local.conf.sample.extended: update for RPM_PREFER_ELF_ARCH
Updated as the rpm upstream suggested:
- RPM_PREFER_COLOR -> RPM_PREFER_ELF_ARCH
- 3 -> 4
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Mon, 13 Oct 2014 03:53:58 +0000 (23:53 -0400)]
linux-yocto/3.17: v3.17 release and config
Updating the SRCREVs to incoroprate the full 3.17 release, and also
updating the meta data to match the v3.17 content:
9ba007f8d0ab meta: bump kver to v3.17-final 5c6c5fe9b0bf config: remove CONFIG_HOTPLUG 0ceecad5f15a qemu: explicitly include usb configuration fragments f6c78ada8655 gfx: convert CONFIG_TABLET_USB_WACOM to CONFIG_HID_USB_WACOM cd1dbedfa3c9 x86: Support 32 bit binaries
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
(cherry picked from commit d5f1af7ece96cf52e0b110c72210ac15c2f65438) Signed-off-by: Darren Hart <dvhart@linux.intel.com>
-----------------------
...which _adds_ another user of the p->private_data.
Here we restore the declaration in order that 8250_dw compiles.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
[PG: add root cause info to commit log.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 21 Oct 2014 10:50:13 +0000 (11:50 +0100)]
native.bbclass: use BUILD_* variables
Instead of replicating the logic for the host compiler naming from bitbake.conf,
use the BUILD_* variables directly.
Also change BUILD_CPP to use gcc -E (which native.bbclass previously used), as
some recipes (e.g. grub-efi) use ${CPP} with multiple input files, which gcc -E
can handle but cpp can't.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ming Liu [Tue, 21 Oct 2014 11:10:54 +0000 (19:10 +0800)]
rpm: realpath is required before expanding _dbpath in chroot
A regression is introduced by commit 66573093:
[ rpm: Fix rpm relocation macro usage ]
_usr turned out to be a relative path to support dyanmic config after
that, but it's being used somewhere as a indicator to locate substrings,
so we must get the real path of it in advance.
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
He Zhe [Tue, 21 Oct 2014 09:47:44 +0000 (17:47 +0800)]
kernel.bbclass: Create modules directory even if there is no modules installed
During kernel_do_install it needs to make symbol link at
${D}/lib/modules/${KERNEL_VERSION}/build, but there will not be
${D}/lib/modules/${KERNEL_VERSION} if there is no modules installed for current
image, which will result in a build failure.
Add "mkdir -p ${D}/lib/modules/${KERNEL_VERSION}" here to avoid this failure
and the need of similar changes in other scripts that also expect it to exist.
Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Joe MacDonald [Mon, 20 Oct 2014 17:51:21 +0000 (13:51 -0400)]
libxml2: fix CVE-2014-3660
It was discovered that the patch for CVE-2014-0191 for libxml2 is
incomplete. It is still possible to have libxml2 incorrectly perform
entity substituton even when the application using libxml2 explicitly
disables the feature. This can allow a remote denial-of-service attack on
systems with libxml2 prior to 2.9.2.
Roy.Li [Mon, 20 Oct 2014 05:38:14 +0000 (13:38 +0800)]
nfs-utils: fix start-statd
1. add /bin to PATH of start-statd, otherwise systemctl can not be found.
2. drop error when systemd fails to start statd.service; since if it failed,
rpc.statd will be called directly.
Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
