Ting Liu [Fri, 1 Aug 2014 04:33:16 +0000 (12:33 +0800)]
udev[-extraconf]: skip mmc rpmb partitions
In FSL SDK 1.6 Kernel, mmc driver has created a new partition
with "mmcblkXrpmb" if device expresses it support of RPMB.
RPMB (Replay Protected Memory Block), A signed access to a Replay
Protected Memory Block is provided. This function provides means
for the system to store data to the specific memory area in an
authenticated and replay protected manner.
In that case, any read/write access to this partition device will
report errors which will not impact any fuction.
add rules to skip it, avoid the below error msg:
| mmcblk0rpmb: retrying using single block read
| mmcblk0rpmb: error -110 transferring data
Ting Liu [Thu, 24 Jul 2014 07:48:16 +0000 (15:48 +0800)]
libvirt: add bbappend for qoriq-ppc customizations
* add customized qemu.conf to enable cgroup device and add /dev/net/tun
device as cgroup
* add customized PKGCONFIG as not all features supported on ppc boards.
Ting Liu [Thu, 24 Jul 2014 02:44:22 +0000 (10:44 +0800)]
set BB_DANGLINGAPPENDS_WARNONLY as true
a ppc specific patch for luajit (exist in mete-oe) was moved to this
layer recently. set BB_DANGLINGAPPENDS_WARNONLY as true for the
situation where meta-oe was not pulled in.
Ting Liu [Tue, 22 Jul 2014 10:04:00 +0000 (18:04 +0800)]
enable multilib for e5500-64b/e6500/e6500-64b
enable multilib by default as it is needed:
* for e5500-64b/e6500-64b, 32bit toolchain is need to build u-boot
* for e6500, only 64bit kernel is supported
Ting Liu [Fri, 11 Jul 2014 07:24:40 +0000 (02:24 -0500)]
add u-boot as EXTRA_IMAGEDEPENDS
* As the doc said:
EXTRA_IMAGEDEPENDS = "A list of recipes to build that do not
provide packages for installing into the root filesystem."
MACHINE_EXTRA_RRECOMMENDS = "A list of machine-specific packages
to install as part of the image being built"
Ting Liu [Fri, 11 Jul 2014 06:07:56 +0000 (01:07 -0500)]
conf/machine/: move common bits to inc files
* add four new files to hold common bits:
include/qoriq-base.inc
include/qoriq-default-providers.inc
include/qoriq-default-settings.inc
include/qoriq-default-versions.inc
* add 'qoriq-ppc' into list of MACHINEOVERRIDES
Zhenhua Luo [Sat, 14 Jun 2014 06:38:18 +0000 (14:38 +0800)]
cryptodev-linux/module: use fsl maintained source
FSL SDK released its own cryptodev based on 1.6, but not all the codes
was upstreamed, add bbappend to use fsl maintained source. This change
only be applied for fsl machines
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Ting Liu <b28495@freescale.com>
Ting Liu [Thu, 3 Jul 2014 07:32:04 +0000 (02:32 -0500)]
openssl: downgrade to 1.0.1g
openssl released in fsl sdk v1.6 was based on 1.0.1g, so downgrade for fsl boards.
the imported recipes were based on daisy-11.0.0 which FSL SDK based on.
Zhenhua Luo [Sat, 14 Jun 2014 06:34:33 +0000 (14:34 +0800)]
asf: update to sdk v1.6 release
changes:
ASFIPSEC: Fix for IPV6 crash dump when L2blob is not resolved.
ASFIPSEC: Patch to fix P1010/P9131 IPSEC.
ASF: Fix - Reassembly cleanCB not getting called.
ASF: Giving fragmented non TCP/UDP/AH/ESP packet back to linux.
ASFIPSEC:Patch to Fix ICV error in IPv6 case.
asf: handle memory leak due to software buffer counter.
AH-SHA1 does not work with ASF
fmc scripts : 48G fmc config file for T4240RDB
ASFIPSEC: Patch to fix crash when IPSEC traffic is initiated.
Patch to fix klocwork issues
Crash during ping6 test for varied sizes across the tunnel.
FMC : Adding new config file to support 22G ports for T2080QDS
ASF : Porting ASF to kernel 3.13
asf_ipsec: Patch to fix the MD5 issue.
ASF: Memory leaks observed.
asf_ipsec: Patch to fix the issue in AH for 64 bits.
ASF_IPSEC:Same SA is getting added twice under stress traffic
ASF_IPSEC:Multiple times of Addition and deletion of SPD and SAs causing linkage problem.
ASF_IPEC: Unable to delete SPD from ASF.
ASF-IPSEC:SA flush with traffic through the DUT causing crash.
ipsec_scripts: Patch to add scripts for all algorithmic combinations for IPsec.
asf_ipfrag: Patch to fix the issue of crash on P5040RDB.
ASF : Patch to decrement software buffer pool counter when packet send to linux.
ASFCTRL : Patch to reflect back the changes made in linux to netdev_notifier_info_to_dev() of asfctrl.
ASF : update CONFIG_FSL_DPAA_TX_RECYCLE to CONFIG_FMAN_T4240
asf_ipsec: Patch to fix the compilation error.
asf_qos: Patch to fix the compilation error in asf_qos.
ASFIPSEC: Integeration with DPAA eth SG driver
asf_proc: Patch to update the procfs code.
ASFIPSEC : Large size self-generated ping packet crash resolved.
ASF: Patch to fix traffic halt issue in IPSEC fragmentation case.
ASFIPSEC: Patch to fix the crash seen while deleting SA.
ASFCTRL: Patch to check for loopback packet and do not offload it.
ASFIPSEC: invalidate magic number while offloading policy in asfctrl_xfrm_enc_hook
ASFIPSEC: Patch to fix IPSEC fragmented traffic issues.
MODULE_LICENSE is changed to dual(BSD/GPL)
ASF: FMC: Adding 1G port entries for T4240QDS boards.
ASF: Defining flag in ASF for FSL_DPAA_TX_RECYCLE framework
ASF: Adding debug module to create a loopback framawork on DPAA platform
ASF:FMC: Extra line is removed from the file.
Removing make error when ASF is disabled in Kernel
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Ting Liu [Sat, 14 Jun 2014 03:37:54 +0000 (11:37 +0800)]
web-sysmon: update to sdk v1.6 release
changes:
Add T4240QDS case, monitor.conf is an example based on T4240QDS
Add power consumption monitoring support
Adjust monitoring duration: 20mins->10mins, 4hours->1hour
Update copyright
Update refresh rate as every 10 senconds
Disable error logging for lighttpd
Ting Liu [Sat, 14 Jun 2014 04:16:45 +0000 (12:16 +0800)]
cst: update to sdk v1.6 release
changes:
KEY_SELECT removed from input file for u-boot -LS1
Input files added for LS1 (group 5)
Added proper address of u-boot for u-boot header
LS1021: unisign fixed for group5
code clean up
code cleanup
Added sample input file for legacy boot feature in dir: input_files/legacy_cfsign/
Added legacy boot feature
code clean up
Entry point and address changed for increased U-boot Size
add support for SDHC in CSF(ESBC) Header
input files modified for c29x
Ting Liu [Sat, 14 Jun 2014 04:06:26 +0000 (12:06 +0800)]
flib: update to sdk v1.6 release
changes:
fix ZUC-E + SNOW f9 decapsulation
fix PDCP Control Plane AES-CTR + SNOW f9 decapsulation
WiMAX: wait to update the header on encap era4
WiMAX: invalidate prefetch buffer on encap (era5+)
fix invalid offset in PDCP MOVE commands
fix RLC PDB comment
fix WiFi for SEC ERA > 5
remove nonsensical comment for MBMS descriptor creation function
fix RLC encap descriptor
add WCDMA RLC protocol descriptors
MBMS processing should be done only on devices with SEC ERA >= 5
MOVE - fix (#2) support for selecting offset in MATH Regs using AUX field
MOVE - fix support for selecting offset in MATH Regs using AUX field
fix MBMS statistics writeback
add MBMS statistics retrieval function
fix PATCH_RAW and PATCH_RAW_NON_LOCAL
beautify MBMS descriptor creation functions
add PATCH_RAW and PATCH_RAW_NON_LOCAL support
fix IFB in MBMS Type 1 & 3 descriptors
remove compiler warnings from descriptors
remove compiler warnings from RTA library core
add MBMS SYNC protocol processing support
SEQ IN PTR - don't generate pointer field when SOP is used
fix PDCP Control Plane AES-CTR + SNOW f9 decapsulation for SEC ERA >=6
PROTOCOL - add ODF and DFV HMO bits for IPsec protocol
fix PDCP Control Plane with ZUC encryption & NULL integrity
Job descriptor - fix usage of Make Trusted Descriptor (MTD)
enable SEC Era 6 support
Extended job descriptor - add support for FTD bit
add JUMP_INC and JUMP_DEC commands
MOVE - add support for selecting offset in MATH Regs using AUX field
SEQFIFOLOAD - add support for AIDF bit
SEQKEY - add support for VLF and AIDF bits
WAITCOMP is a MOVE-specific flag, not a generic flag
LOAD - fix length mask for the case when dst is DCTRL
SEQ OUT PTR - add support for RST and EWS bits
Job descriptor - do not allow TD and MTD options in the same time
Job descriptor - add support for Extended Header - JOB_HDR_EXT
refactoring - add __rta_out* for writing in the descriptor buffer
LOAD command fix - always return the insertion offset in the desc buffer
add defines needed for Linux kernel integration
add helper macros for finding out descriptor length
move platform dependencies to compat.h
whitespace fixes
add Class Context src/dst for the LOAD/STORE commands
add defines for SEC commands
rename MATH src/dst PROT to MATH DPOVRD
add support for RNG4 bits PS, AI
rename FIFOLD_TYPE_DFIFO to FIFOLD_TYPE_NOINFOFIFO
rename LD/ST DECO descriptor buffers src/dst
sync pdb.h with Linux kernel counterpart
prepare sync of pdb.h with Linux kernel counterpart
fix test_load DXLT golden pattern
Update RSA descriptors
add DES-CBC/3DES-CBC & AES-XCBC-MAC-96 IPsec descriptors
add TLS family descriptor for cipher block suites
add RSA protocol descriptors
fix AES-CTR + SNOW f9 decapsulation
Ting Liu [Sat, 14 Jun 2014 03:40:06 +0000 (11:40 +0800)]
qoriq-debug: update to sdk v1.6 release
Changes:
Corrected char buffer overrun error
Added suport for Linux kernel 3.12
Corrected memory map for QMAN and BMAN for T4/B4
Added Device Config support for Gen 1 processors.
Support for additional T4240rev2 and B4860rev2 debug components
Ting Liu [Sat, 14 Jun 2014 03:55:54 +0000 (11:55 +0800)]
hypervisor: update to v1.3-009 release
v1.3-009 bug fixes and changes
-introducing "fast tlb1 feature" - the performance of TLB1 emulation
is significantly improved by implementing a shorter code path for
non-IPROT TLB1 entries. This is particularly useful for guests
making heavy use of tlb1, for example when using indirect tlb1 entries.
The feature is controlled by a Kconfig option and is enabled by default.
-EPCR[DGTMI] (disable guest tlb management instructions) is now
dynamically controlled
-workaround A-006958 time-base erratum
-workaround A-007907 l1 stash on e6500 erratum
-workaround A-008007 t1040 pvr erratum
-workaround A-00598 pamu erratum
-workaround t1040 uart fifo erratum
-other misc fixes
Vakul Garg [Wed, 19 Mar 2014 16:33:21 +0000 (12:33 -0400)]
usdpaa: update to sdk v1.6 release
1. Added a new variable for the FMan version so that the usdpaa applications to
correctly use the fmlib interface.
2. Unify the indentation character, replace tab with space 4 character
3. add support for new added boards
Ting Liu [Tue, 1 Jul 2014 09:03:46 +0000 (04:03 -0500)]
u-boot: adjust DEPENDS and PATH setting for multilib build
all cross tools were put into the native sysroot per target arch
instead of tune arch now:
commit e078edbf99f733c04ec8ca50ff10d2200b6d14d4
binutils/gcc/gdb: Add TARGET_ARCH to PN for all cross recipes
adjust DEPENDS and PATH setting for multilib build
Ting Liu [Fri, 17 Jan 2014 09:33:38 +0000 (17:33 +0800)]
u-boot: update to sdk v1.6 release
1.u-boot released in sdk v1.6 was based on 2014.01, set PV to 2014.01+fslgit
2.all the license files was put to Licenses/ directory now, update LIC_FILES_CHKSUM
3.not break if the u-boot config not supported
4.nand u-boot was named as u-boot-with-spl.bin, copy the right binary
Ting Liu [Tue, 18 Feb 2014 08:47:44 +0000 (16:47 +0800)]
linux: update to sdk v1.6 release
1.move more generic bits to linux-qoriq-sdk.inc file
2.add support for multiple kernel delta config files
3.Append SDK_VERSION to .scmversion, and use the same version format
with u-boot. For exmaple: 3.12.17-rt25-QorIQ-SDK-V1.6+gfae7d11
4.add linux-qoirq-sdk_3.12.bb to use latest released codes in sdk v1.6, detailed changes can be viewed at:
http://git.freescale.com/git/cgit.cgi/ppc/sdk/linux.git/log/?qt=range&q=c29fe1a733308cbe592b3af054a97be1b91cf2dd
