Richard Purdie [Fri, 31 Jul 2015 10:28:56 +0000 (11:28 +0100)]
cross-canadian: Add symlinks for multilib cases
In the same way we map various TARGET_OS options back to the single
cross-canadian compiler, add mappings for the TARGET_VENDOR cases we
know about in the multilib case.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 31 Jul 2015 10:28:22 +0000 (11:28 +0100)]
libgcc: Fix symlink handling in cross-arch multilib cases
The symlink being generated needs to match both the current arch (e.g. mips
or mips64) but also use the underlying TARGET_SYS without multilib extensions
to TARGET_VENDOR or extensions to TARGET_OS.
The way multilib changes TARGET_VENDOR meant this code did not have
a way of removing that change. The method of removing some TARGET_OS
suffixes was also not working.
By using immediate expansion to run this code, we can run before the
multilib code changes it and get the original values.
We then use the *current* TARGET_ARCH value in case this does get changed
by the multilib since we need to point at the right compiler (32 bit one
for 32 bit code).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 31 Jul 2015 10:27:05 +0000 (11:27 +0100)]
gcc-cross-canadian: Add symlink to real-ld alongside other symlinks
In some cases such as cross architecture configurations (using mips-X-linux
on mips64-X-linux), gcc can get confused about finding a 'real' version
of ld. Adding a symlink to 'real-ld' allowed these configurations
to work properly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 31 Jul 2015 10:26:24 +0000 (11:26 +0100)]
gcc: Add patch to handle on target multilibs better
On target multilibs did not work properly since gcc-cross-canadian
was only searching a limited number of sysroot directories to
find multilib target binaries.
This adds an extra search path to ensure those binaries are found
and our gcc-cross-canadian works everywhere we need it to, e.g.
with mips trilib configurations.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 31 Jul 2015 10:24:01 +0000 (11:24 +0100)]
utils: Handle MLPREFIX in all_multilib_tune_values()
MLPREFIX wasn't being set by the function correctly since its
not an overridden value but directly set. Handle this variable
explicitly so the function returns the expected values.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 31 Jul 2015 10:23:22 +0000 (11:23 +0100)]
testimage: testsdk fixes/improvements
The "bitbake meta-toolchain" comment is dated and incorrect, fix to
point at -c populate_sdk.
If a toolchain contains multiple environment files, iterate them and run
the sdk test suite on each on in turn rather than giving a fatal error and
giving up.
Also improve the debug output so that rather than PN, it also show the
toolchain tarball under test, and the environment file name its using.
Also enable the accidentally disabled cleanup code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Fri, 31 Jul 2015 09:31:34 +0000 (10:31 +0100)]
devtool: use tinfoil shutdown method
Tinfoil now has its own shutdown method, use it instead of calling into
cooker - not only is it the right thing to do from an API perspective,
it also ensures proper lock handling.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kevin Hao [Fri, 31 Jul 2015 05:21:25 +0000 (13:21 +0800)]
u-boot: fix extern inline build errors for gcc 5
The gcc 5 change its default standard from gnu89 to gnu11. These two
standards do have different semantics for inline functions. And the
gcc 5 will emit the following errors on the "extern inline" functions:
arch/powerpc/cpu/mpc8xxx/fsl_lbc.o: In function `ld_le16':
./arch/powerpc/include/asm/byteorder.h:12: multiple definition of `ld_le16'
arch/powerpc/cpu/mpc8xxx/fdt.o:./arch/powerpc/include/asm/byteorder.h:12: first defined here
Fix these build errors by using "-fgnu89-inline" to enforce the gnu89
inline semantics as suggested in [1].
[1] https://gcc.gnu.org/gcc-5/porting_to.html
Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit c908a423f85a84ddd8249abd00254f29d47df74b introduced a new
issue in combo-layer that leads to a traceback as
args.hard_reset is an unknown variable. This change defines an
appropriate destination for the command args parser and fixes the
reference.
Signed-off-by: Alexander Kanevskiy <kad@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 29 Jul 2015 09:50:49 +0000 (10:50 +0100)]
sshcontrol: Use os.environ.copy() instead of copy.copy()
os.environ is special and copy.copy() doesn't do what we'd expect,
changes in the child object change the parent. copy.deepcopy() is
also known to have issues with it.
Use the dedicated .copy() method which will not influence the
parent. This fixes selftest failures where the DISPLAY variable
disappears.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 28 Jul 2015 16:51:42 +0000 (17:51 +0100)]
pixbufcache: Use sceneQueueComplete event to simplify usage
Ensuring the native pixbuf cache is correct after new loaders have
been installed is tricky. This needs to be done without races
and work regardless of whether the build is from sstate or freshly
built for one or more modules.
This adds a hook into base.bbclass which is then triggered by the
code from pixbufcache. This patch is an improved version which
means base.bbclass has no pixbuf knowledge and the mechanism can
be reused in other cases.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
André Draszik [Fri, 24 Jul 2015 13:14:30 +0000 (14:14 +0100)]
arch-armv7a.inc, feature-arm-vfp.inc: add tunes for vfpv3 and vfpv3d16
This adds tunes for ARM's v3 Vector Floating Point unit for
16 and 32 bit implementation:
http://www.arm.com/products/processors/technologies/vector-floating-point.php
See also https://wiki.debian.org/ArmHardFloatPort/VfpComparison
for a nice comparison and why vfpv3d16 is useful.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Roy Li [Mon, 27 Jul 2015 02:45:49 +0000 (10:45 +0800)]
bind: upgrade to 9.10.2-P2
upgrade to fix CVE-2015-4620:
name.c in named in ISC BIND 9.7.x through 9.9.x before 9.9.7-P1 and 9.10.x
before 9.10.2-P2, when configured as a recursive resolver with DNSSEC
validation, allows remote attackers to cause a denial of service (REQUIRE
assertion failure and daemon exit) by constructing crafted zone data and
then making a query for a name in that zone.
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Robert Yang [Tue, 28 Jul 2015 09:05:09 +0000 (02:05 -0700)]
qemu: add PACKAGECONFIG for gnutls
Fixed:
qemu-2.3.99+2.4.0-rc2: qemu rdepends on nettle, but it isn't a build dependency? [build-deps]
qemu-2.3.99+2.4.0-rc2: qemu rdepends on gnutls, but it isn't a build dependency? [build-deps]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Robert Yang [Tue, 28 Jul 2015 09:05:10 +0000 (02:05 -0700)]
qemu_git.bb: remove it
Remove it since we have 2.4.0, the git version is 1.3 can't be built by
deafult:
ERROR: Fetcher failure: Unable to find revision 04024dea2674861fcf13582a77b58130c67fccd8 in branch master even from upstream
We can fix it, but seems that no one uses it any more.
And move patches from "files" dir to "qemu" dir.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Tue, 28 Jul 2015 13:23:37 +0000 (14:23 +0100)]
gcc: Add support for nativesdk-gcc
Being able to build a nativesdk gcc is useful, particularly in cases
where the host compiler may be of an incompatible version (or a 32
bit compiler is needed).
Sadly, building nativesdk-gcc is not straight forward. We install
nativesdk-gcc into a relocatable location and this means that its
library locations can change. "Normal" sysroot support doesn't help
in this case since the values of paths like "libdir" change, not just
base root directory of the system.
In order to handle this we do two things:
a) Add %r into spec file markup which can be used for injected paths
such as SYSTEMLIBS_DIR (see gcc_multilib_setup()).
b) Add other paths which need relocation into a .gccrelocprefix section
which the relocation code will notice and adjust automatically.
This patch adds tweaks to the relocation script to handle the
new section too.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 25 Jul 2015 13:47:52 +0000 (14:47 +0100)]
cross-canadian: Put links in place for uclibc and musl
gcc-cross-canadian-<arch> is only built once. It needs to target all the
different libcs, not just the currently selected one. This change
ensures that if another libc is used, symlinks are present such that the
compiler can be found. The base version is always assumed to be "glibc"
with symlinks from musl and uclibc compiler names.
This means gcc-cross-canadian is consistent regardless of which libc is
selected when its build in multimachine builds.
Richard Purdie [Sat, 25 Jul 2015 13:48:21 +0000 (14:48 +0100)]
toolchain-scripts: For non-glibc, pass compiler options to ensure the correct libc selection
gcc-cross-canadian-<arch> is only built once. It needs to target all the
different libcs, not just the currently selected one. This change ensures
that if another libc is used, the compiler correctly selects the right one.
[YOCTO #8025]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 27 Jul 2015 21:15:57 +0000 (22:15 +0100)]
oeqa/qemurunner: Fix AttributeError: QemuRunner instance has no attribute 'server_socket'
If start() returns False due to create_socker() failing, stop() may still get
called and currently this gives a track back since server_socket doesn't exist.
Avoid this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
nativesdk-qt4-tools: depend on nativesdk-qt4-tools only if DISTRO_FEATURES includes x11
Currently nativesdk-qt4-tools can't be built if the DISTRO_FEATURES doesn't contain x11.
To make it build we add a dependency to x11 only if the feature is activated.
Signed-off-by: Pascal Bach <pascal.bach@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 27 Jul 2015 13:24:22 +0000 (13:24 +0000)]
targetcontrol: Improve logs by outputting qemu boot log in case of failure
We've had a few cases on the autobuilder where we've lost logs of
the boot and been unable to debug it further. Show this information
onto the console to be more useful.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 27 Jul 2015 13:04:06 +0000 (14:04 +0100)]
oeqa/selftest/devtool: use new runqemu function
Use the common code we now have to run QEMU instead of running it
ourselves, avoiding reliance on the machine showing up at 192.168.7.2.
This also makes a copy of the image rather than using -snapshot so if we
need to inspect the image after a failure, we can.
Fixes [YOCTO #7928].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These tests were _deleting_ meta-intel if it happened to appear under
COREBASE, which could have been catastrophic if there was any work in
progress in that directory. It turns out we don't even need meta-intel,
but we do need a machine that's set up appropriately (e.g.
genericx86-64). Tests that involve layers outside of OE-Core don't
really belong in OE-Core, and genericx86-64 is in meta-yocto-bsp;
however we will soon have the capability to have selftest tests in other
layers, so remove this here so we can add a fixed version in
meta-yocto-bsp after that happens.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 27 Jul 2015 13:04:04 +0000 (14:04 +0100)]
oeqa/selftest/imagefeatures: fix RPM4 test
* Use our new runqemu function
* Don't hard-code the RPM4 version
* Double-check the native version is RPM4
* Check that an rpm 4.x package is in the image manifest (this isn't
strictly necessary, but "belt-and-braces" and it serves as an example
of how to do that)
* Check that the database is working on the target
* Ensure the image actually has openssh in it so we can connect to it
Initial runqemu adaptation by Richard Purdie <richard.purdie@linuxfoundation.org>
Part of the fix for [YOCTO #7994].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 27 Jul 2015 13:04:03 +0000 (14:04 +0100)]
oeqa/selftest/imagefeatures: fix SSH without password tests
* We need to set EXTRA_IMAGE_FEATURES outright or existing values will
affect the test
* For test case 1107 we need "empty-root-password" to match the behaviour
described in the test case
* For test case 1115 we shouldn't be able to connect as root with the
features we are setting
Test cases 1107 and 1115 have been updated in Testopia to match.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 27 Jul 2015 13:04:02 +0000 (14:04 +0100)]
oeqa/selftest/imagefeatures: Use QemuTarget code
Create a runqemu function which uses the QemuTarget() code from
oeqa.targetcontrol to setup the QEMU instance, with all of the added
robustness that that gives us. To do this, a datastore is needed for the
recipe in question (core-image-minimal) so we do the work needed to set
this up. We then use this runqemu function within the imagefeatures
tests instead of a hand-rolled implementation.
We can then use SSHControl to run the SSH tests rather than rolling our
own code to do that as an added bonus.
Fixed and extended by Paul Eggleton <paul.eggleton@linux.intel.com>.
Part of the fix for [YOCTO #7994].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 27 Jul 2015 13:04:01 +0000 (14:04 +0100)]
oeqa/targetcontrol: write QemuRunner log output to a file
If we use this outside of testimage we don't have a task log; so let's
just explicitly write the log output to a file all the time so it's
always there to look at (particularly useful when runqemu exits
immediately with an error.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 27 Jul 2015 13:04:00 +0000 (14:04 +0100)]
oeqa/utils/qemurunner: fix error handling if runqemu exits with an error
* Don't wait for QEMU to start if it's never going to (because runqemu
exited with an error)
* Don't error out if killing the process fails with "no such process"
(we don't care if it's already dead)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 27 Jul 2015 13:03:59 +0000 (14:03 +0100)]
oeqa/utils/qemurunner: avoid blocking on stty when running under oe-selftest
runqemu-internal runs stty to return the terminal to its previous state
in case QEMU hasn't done that properly (which it at least used to do
when it crashed). For some reason I have yet to determine, stty blocks
(on tcsetattr() according to gdb) when run within QemuRunner() under
oe-selftest, with the result that we always wait until the timeout and
then we kill the script, which adds an extra delay after QEMU is
stopped. Naturally you would assume that this is something to do with
the nature of the terminal under which it is being run; however no
amount of playing around with stdin/stdout/stderr seemed to fix the
issue, apart from passing in subprocess.PIPE as stdin which makes stty
error out with "stty: standard input: Inappropriate ioctl for device". I
was also unable to come up with a reliable test for the terminal which
we could use inside runqemu-internal to avoid calling stty. For now, go
with the stdin=subprocess.PIPE workaround to at least avoid the delay
with minimal ill effect.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1) it prevented logging to the task log from working within bitbake
-c testimage. This is due to the logger object being set up too early
which interferes with BitBake's own logging. If we prefix the name
with "BitBake." everything works (and we don't need to set the
logging level).
2) Additionally because it called the log functions on the logging
module and not the logger object it set up, this caused the
oe-selftest logging to start printing everything from that point
forward.
Fix these two issues and return us to the desired behaviour for
do_testimage.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes it easier to extend, as a layer can add its own sub-commands.
Argument parsing is also separated into two steps, the same way it's done in
recipetool, as we need access to the global command-line arguments early,
before plugins are loaded, both for debugging arguments and for the bitbake
path (we need to load the bitbake module to get tinfoil, which is now needed
to load the plugins).
Rather than constructing tinfoil once and passing it through into sub-commands
for their use, we have to construct it for configuration metadata, use it, and
then shut it down, as some sub-commands call out to recipetool, which needs
its own tinfoil instance, and therefore needs to acquire the bitbake lock. If
we're still holding the lock at that point, that's clearly a problem.
[YOCTO #7625]
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
This separates the argument parsing into two steps, which lets us apply global
settings like enabling debugging before the plugins load, so we can see the
paths where plugins are being loaded.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ed Bartosh [Mon, 27 Jul 2015 10:55:52 +0000 (13:55 +0300)]
toaster.bbclass: Fix ValueError
Running "bitbake xxx:do_unpack" resulted in exception at the
BuildCompleted event from toaster.
The reason for this exception was usage of ':' as a field
delimiter in toasterstatlist file. As target can optionally
contain ':<task>' suffix it caused split(':') to throw exception:
File "toaster_collect_task_stats(e)", line 71, in
toaster_collect_task_stats(e=<bb.event.BuildCompleted object at
0x7f8434deed50>)
ValueError: too many values to unpack
Fixed by changing delimiter ':' -> '::'
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Mon, 6 Jul 2015 10:35:35 +0000 (03:35 -0700)]
gcc-target 5.1: fix for libcc1
Fixed:
* gcc 5 introduces a plugin libcc1.so, which is used by gdb, the target
gcc didn't build it in the past because gcc_cv_objdump is null, and
the error was:
gcc-5.2.0/libcc1/configure: line 14531: -T: command not found
This only happens for tar gcc as the code shows:
if test x$build = x$host; then
export_sym_check="objdump${exeext} -T"
elif test x$host = x$target; then
export_sym_check="$gcc_cv_objdump -T"
else
export_sym_check=
fi
* Install libcc1.so and libcc1plugin.so to
$(libexecdir)/gcc/$(target_noncanonical)/$(gcc_version) as lto-plugin did.
* Use sed command to fix bad RPATH iussue.
[YOCTO #7956]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 25 Jul 2015 22:05:22 +0000 (23:05 +0100)]
update-rc.d: Include updated-rc.d in DEPENDS
If you build a user of updated-rc.d like udev, as things stand currently
nothing pulls in updated-rc.d but there is a dependency added on the
package at do_package time. This can lead to errors during rootfs
construction either with licensing. The fact its a RRECOMMEND means
the image are not deterministic.
A particularly good test case for reproducing this is:
Bruce Ashfield [Tue, 21 Jul 2015 15:21:07 +0000 (11:21 -0400)]
linux-yocto: introduce 4.1 versioned recipes
Updating the linux-yocto kernel recipes to include a named/versioned 4.1
recipe. This will be the LTSI kernel, and the 3.14 and 3.19 kernels will
be removed in subsequent commites (once reference boards have transitioned).
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 21 Jul 2015 15:21:05 +0000 (11:21 -0400)]
kern-tools: standalone tree configuration
Updating the kern-tools SRCREV to import the following changes:
cbd4b7102668 patchme/updateme: unify meta directory handling b65075997152 configme: standalone operation
The change of note is [configme: standalone operation], which makes the
kernel configuration script free from dependencies on other parts of the
kern-tools.
With this change, we set the stage to extend kernel configuration
fragments and auditing to arbitrary trees.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 21 Jul 2015 15:21:04 +0000 (11:21 -0400)]
linux-yocto: split meta data from kernel repository
The linux-yocto tree has always been a combined set of kernel changes
and configuration (meta) data carried in a single tree. While this
format is effective at keeping kernel configuration and source
modifications synchronized, it isn't always obvious to developers on
how to manipulate the meta data versus the source.
With this change, we remove the meta data processing from the
kernel-yocto class and use the external meta-data repository that
has always been used to seed the linux-yocto meta branch.
After this change, linux-yocto can no longer process combined trees,
and is simplified as a result.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Thu, 23 Jul 2015 21:59:49 +0000 (22:59 +0100)]
oeqa/runtime/parselogs: don't use uname to get MACHINE
Instead of running "uname -n" on the target (which actually returns the
hostname) to get something approximating the hostname (or not, if that has been
overriden), simply fetch MACHINE from the datastore.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Thu, 23 Jul 2015 21:59:48 +0000 (22:59 +0100)]
oeqa/selftest/imagefeatures: handle killpg victim not existing
If Pexpect throws an exception it may be because the child has already died, in
which case killpg will fail. Catch the latter exception silently, and output
the exception from Pexpect.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This locale package isn't guaranteed to exist, depending on the value of
GLIBC_GENERATE_LOCALES.
The value of GLIBC_GENERATE_LOCALES can be specified to not contain
locale-base-ru-ru, thus resulting in unsatisfied dependency. Its better
to remove hardcoded dependency upon locale-base-ru-ru in favor of a
recommendation, as this locale isn't always available depending upon the
value of GLIBC_GENERATE_LOCALES.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Abdur Rehman <abdur_rehman@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
recipetool: appendsrcfile: handle S == STAGING_KERNEL_DIR
When determining the path from WORKDIR to the extracted sources, we're using
S, but if S is in work-shared, that's problematic and won't give us good
results, so assume 'git' for that case, warning when appropriate.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeqa/buildoptions.py: automate test case 926, archive work dir and export source
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
