* Otherwise, recipes that only append to SRC_URI instead of
overwriting it will get the full path of the recipe written
into the Source: field of the package.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Wed, 7 Mar 2012 08:06:46 +0000 (00:06 -0800)]
kernel.bbclass: Remove warnings for modutils and modprobe.d
Fixes [Yocto #2036]
The source and build directories are unused, remove them.
The modutils and modprobe.d directories may be used if modules are built that
are either autoloaded or have modprobe.d entries. This isn't known at install
time, so check after the package split if these directories are empty and
remove them if they are.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
external-csl-toolchain: override PKGV, not PKGV_${PN}
This is needed to ensure that the RDEPENDS_${PN}-dev,
RDEPENDS_${PN}-staticdev, and RRECOMMENDS_${PN}-dbg are accurate with respect
to the PKGV of the ${PN} package, and incidentally fixes an rpm packaging
issue, as rpm dislikes the recipe PV as PKGV.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Zhai Edwin [Tue, 6 Mar 2012 17:03:17 +0000 (09:03 -0800)]
shadow-sysroot: Fix for multilib
Fix following error in multilib build:
"ERROR: Task do_package_setscene depends upon nonexistant task
poky/meta/recipes-extended/shadow/shadow-sysroot_4.1.4.3.bb:do_populate_sysroot_setscene"
>From richard.purdie@linuxfoundation.org
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Tue, 6 Mar 2012 17:03:11 +0000 (09:03 -0800)]
logrotate 3.7.9: Allow rotate log across filesystems
The logrotate can't save the log across the different filesystems since
it used the "rename(const char *oldpath, const char *newpath)" to save
the file, fix it to act as the "mv" command(first rename, if failed,
read and write) to allow save the log across the different filesystems.
* config.c: Remove the check for different filesystems
* logrotate.c: Act as the "mv" command when rotate log
* logrotate.8: Update the mannual
* logrotate.8: Fix a bug in the mannual(\f should be \fR)
[YOCTO #718]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 6 Mar 2012 17:03:09 +0000 (09:03 -0800)]
linux-yocto: use bareclone option
Instead of specifying nocheckout=1, it provides a better workflow if
the linux-yocto recipes use the new bareclone=1 option to get a mirrored
copy of the source repository. This allows all local and remote branches
to be available during the kernel build and development cycle.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ken Werner [Tue, 6 Mar 2012 17:03:06 +0000 (09:03 -0800)]
image_types: add IMAGE_ROOTFS_ALIGNMENT
Introduce a new variable called IMAGE_ROOTFS_ALIGNMENT that allows to control
the aligment of the size of the rootfs. Its default value is set to 1KiB so
that the existing behaviour is not changed. In case the SD card emulation of
a QEMU system emulator gets used you may set the alignment to 2MiB.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chase Maupin [Wed, 7 Mar 2012 20:48:52 +0000 (14:48 -0600)]
bluez4: add dependency on libcheck to enable test modules
* The later versions of bluez such as 4.98 require libcheck
in order to build the test packages as enabled by the
--enable-test option passed in EXTRA_OECONF.
* Failure to have the libcheck package available results in the
configure script ignoring the --enable-test option and not
building the test modules.
* Adding libcheck, which is greater than the minimum required
version of the check library of 0.9.6 allows building the
test modules.
* Build tested for am335x-evm MACHINE type and run time tested
by back porting this fix to the oe-classic and arago setup
and booting on am335x-evm.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 5 Mar 2012 21:01:21 +0000 (13:01 -0800)]
base.bbclass: Fix PACKAGECONFIG handling when no flags are set
When the main PACKAGECONFIG variable was empty with no flags set,
the options were not being added to explicitly disable features.
This patch corrects that problem and ensures the disable fields
are correctly parsed and added to variables.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
soc-family.inc: to be included in machine.conf to add SOC_FAMILY to MACHINEOVERRIDE
Add a soc-family.inc file that can be included in a machine.conf to enable
the use of SOC_FAMILY in MACHINEOVERRIDE, which could be useful to group
multiple machines with the same common base. Some examples can be seen in
meta-ti BSP layer.
Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LSB 4.1 complain a host contamination error from libx11 because of absent
patch "makekeys_crosscompile.patch" from libx11-trim-1.4.4.
The error from LSB Test Suite is as follow:
VSW5TESTSUITE PURPOSE 7
Assertion XStringToKeysym-7.(A)
When the string argument is the name of a KeySym in the
table with the prefix XK_ removed, then a call to
XStringToKeysym returns that KeySym.
METH: For each KeySym name in table with code G:
METH: Call XStringToKeysym to obtain the KeySym defined for that string.
METH: Verify that XStringToKeysym did not return NoSymbol.
METH: Verify that the returned string is correct.
CHECK: XStringToKeysym-7 1, line 130
CHECK: XStringToKeysym-7 2, line 140
CHECK: XStringToKeysym-7 3, line 150
CHECK: XStringToKeysym-7 4, line 160
CHECK: XStringToKeysym-7 5, line 170
CHECK: XStringToKeysym-7 6, line 180
CHECK: XStringToKeysym-7 7, line 190
CHECK: XStringToKeysym-7 8, line 200
CHECK: XStringToKeysym-7 9, line 210
CHECK: XStringToKeysym-7 10, line 220
CHECK: XStringToKeysym-7 11, line 230
CHECK: XStringToKeysym-7 12, line 240
CHECK: XStringToKeysym-7 13, line 250
CHECK: XStringToKeysym-7 14, line 260
CHECK: XStringToKeysym-7 15, line 270
CHECK: XStringToKeysym-7 16, line 280
CHECK: XStringToKeysym-7 17, line 290
CHECK: XStringToKeysym-7 18, line 300
CHECK: XStringToKeysym-7 19, line 310
CHECK: XStringToKeysym-7 20, line 320
[YOCTO #1970]
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 2 Mar 2012 11:53:26 +0000 (11:53 +0000)]
base.bbclass: If unpacking again, wipe out ${S}/patches
If we unpack again, its assumed the data in any patches directory is invalid
since do_patch will run again. This ensures old patch data doesn't get
reused in a confused way.
Ideally we should probably wipe out ${S} here but that is probably a change
for another time.
[YOCTO #2043 partially]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 1 Mar 2012 23:38:00 +0000 (23:38 +0000)]
lib/oe/patch.py: Fix and improve PatchTree() resolver logic
Currently, if PATCHRESOLVE is user and and PatchTree() is being used, you can
get backtraces if patch application fails. This is because even in the failure
case, self._current is incremented, meaning second time around, there are array
range issues.
This patch changes the code so _current is only incremented upon successful
patch application, thereby resolving this failure.
Secondly, if you bitbake -c patch -f a recipe using PatchTree(), the
clean method was unimplemented leading to patch failures.
The other part of this patch changes the logic so a series file and
set of applied patches are maintained in a quilt like fashion. This
means a the Clean method can be implemented correctly and rerunning
the patch task of an existing patches source now works reliably.
[YOCTO #2043 partially]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Tue, 28 Feb 2012 17:36:22 +0000 (17:36 +0000)]
qt4: make pulseaudio support conditional upon DISTRO_FEATURES
Add a pulseaudio DISTRO_FEATURES item and disable pulseaudio support in
phonon within Qt4 if it is not present; otherwise it is a race condition
as to whether it is enabled or disabled or breaks the build.
Note that this adds pulseaudio to DISTRO_FEATURES_BACKFILL thus leaving
existing distro configurations unaffected.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
James Limbouris [Wed, 29 Feb 2012 01:13:46 +0000 (09:13 +0800)]
initscripts: Create the volatiles cache atomically.
If a machine loses power while building the volatiles cache, it will
continue to operate with an incomplete set of volatiles. Fix this by
updating atomically.
Signed-off-by: James Limbouris <james@digitalmatter.com.au> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 28 Feb 2012 21:09:58 +0000 (16:09 -0500)]
linux-yocto: make kernel_checkout reentrant
The steps in do_kernel_checkout modify the source tree in WORKDIR.
If it is called multiple times, or interrupted, the tree is left
in an inconsistent state.
This change adds protections around branch names, and around the
manipulations of directories to ensure that it is safe to call
at any point.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Garman [Tue, 28 Feb 2012 21:45:28 +0000 (13:45 -0800)]
sudo: upgrade to 1.8.4
During the upgrade to 1.8.4, the UCB-licensed fnmatch.c was replaced
with a non-recursive BSD-licensed version, hence the removal of UCB
and addition of BSD in the LICENSE field. This led to checksum changes
in the doc/LICENSE file, and we now additionally track the comment
headers in redblack.c.
These changes were confirmed on the sudo mailing list:
Robert Yang [Fri, 2 Mar 2012 10:34:19 +0000 (18:34 +0800)]
V2 Fix libpam's chmod
The libpam's has an error when generating the rootfs:
chmod: cannot access `/usr/sbin/unix_chkpwd': No such file or directory
This is because the following code in libpam_1.1.5.bb:
pkg_postinst_pam-plugin-unix () {
# below is necessary to allow unix_chkpwd get user info from shadow file
# on lsb images
chmod 4755 ${sbindir}/unix_chkpwd
}
This is to set the setuid permission for unix_chkpwd (the lsb test
requires this), but it lacks a "${D}", and we can do this in the install
stage.
[YOCTO #2049]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Gary Thomas [Thu, 1 Mar 2012 17:41:38 +0000 (10:41 -0700)]
busybox: Restore 'date' compatability
Restore CONFIG_FEATURE_DATE_COMPAT so that all versions of 'date',
whether from busybox or coreutils, agree on the format when
setting the date from the command line.
Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
site.conf.sample: Fix broken SOCKS proxy setup and configuration
SOCKS proxy specification with git was using conflicting methods and
thus was failing when mixed SOCKS needs were in place (requiring no
proxy for some hosts and proxy for the rest)
- GIT_PROXY_COMMAND is an environment variable GIT uses to OVERRIDE
all proxy configuration in ~/.gitconfig or any other gitconfig. By
using it to configure, it was breaking havoc on site git
configuration or the one generated by bitbake in tmp/.
Renamed to OE_GIT_PROXY_COMMAND in meta/conf/site.conf.sample
(with a doc tidbit on the name chosen), meta/classes/base.bbclass.
- The gitconfig generated by bitbake was wrong. There was a typo error
(gitproxy vs gitProxy), thus all lines were being ignored. Fixed in
meta/classes/base.bbclass.
- The gitconfig generated was being placed in
${STAGING_DIR_NATIVE}/usr/etc/gitconfig; git was looking for it in
${STAGING_DIR_NATIVE}/etc/gitconfig. Fixed that in
meta/classes/base.bbclass, at the same time creating a
GIT_CONFIG_PATH variable, since it is also referenced in
generate_git_config() and have all instances refer to that.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 1 Mar 2012 15:54:46 +0000 (15:54 +0000)]
toolchain-scripts: Exclude variables causing the recipe to become unecessarily machine specific
basehash changed from 30e97f9eeed1df8488b62b4fb47a3a0c to 72ea9a277e6599ae9052b169b9a94f1b
Variable TOOLCHAIN_CONFIGSITE_SYSROOTCACHE value changed from
/OE/oe-core/tmp-eglibc/sysroots/qemux86-64/usr/share/x86_64-oe-linux_config_site.d
to
/OE/oe-core/tmp-eglibc/sysroots/qemux86-64copy/usr/share/x86_64-oe-linux_config_site.d
Variable TIME value changed from 084543 to 085638
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Thu, 1 Mar 2012 04:37:04 +0000 (20:37 -0800)]
netbase: fix QA Warnings
WARNING: For recipe netbase, the following files/directories were installed but not shipped in any package:
WARNING: /usr/sbin Signed-off-by: Saul Wold <sgw@linux.intel.com>
Saul Wold [Thu, 1 Mar 2012 04:36:08 +0000 (20:36 -0800)]
perl: remove empty directories to clean QA Warnings
WARNING: For recipe perl, the following files/directories were installed but not shipped in any package:
WARNING: /usr/lib/perl/site_perl
WARNING: /usr/lib/perl/site_perl/5.14.2 Signed-off-by: Saul Wold <sgw@linux.intel.com>
Saul Wold [Thu, 1 Mar 2012 07:46:21 +0000 (23:46 -0800)]
image-vmdk: Create image_vmdk class and setup image and image_types to use it
This creates a new image_vmdk class similar to live. The image_vmdk
class needs to have a hddimg created by the image-live class, so it
inherits it directly.
The changes to image_types is to ensure that both live and vmdk images
get the ext3 tools and dependencies.
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Thu, 1 Mar 2012 02:27:07 +0000 (21:27 -0500)]
linux-libc-headers-yocto: bump to v3.2.8
Making two changes for BSPs that prefer linux-libc-headers-yocto:
- bumping to v3.2.8 headers
- stubbing out unecessary linux-yocto functions when headers
are being built
[YOCTO #2032]
Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 29 Feb 2012 16:24:26 +0000 (16:24 +0000)]
image_types: Correctness fixes
* Add a newline to improve the output formatting
* Use set() to turn the list into a set of unique items to prevnt
the same image code running twice (for e.g. IMAGE_FSTYPES = "tar.gz tar.bz2")
* Support multiple compression extensions such as ".gz.u-boot"
* Fix basetype/type typo and fix multiple image generation
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
James Limbouris [Wed, 29 Feb 2012 06:56:30 +0000 (14:56 +0800)]
busybox: Enable 64 bit shell tests, and disable non-standard date format interpretation.
Without 64 bit shell tests, the timestamp comparison in initscripts' bootmisc.sh throws 'out of range' errors.
With CONFIG_FEATURE_DATE_COMPAT, date reads the YYYYMMddhhmm string as hhmmYYYYMMdd when setting the time from the timestamp in bootmisc.sh.
Signed-off-by: James Limbouris <james@digitalmatter.com.au> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 27 Feb 2012 12:43:49 +0000 (12:43 +0000)]
image_types: Refactor compression code into a generic compression solution
The current approach of adding each different compressed image type doesn't
scale. This patch changes the code so compressed images for each form are
automatically available using the form <type>.<compression type> in
IMAGE_FSTYPES. This doesn't change any existing externally visible behaviour
and the image generation process becomes more efficient as a result too.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wenzong Fan [Tue, 14 Feb 2012 01:42:59 +0000 (09:42 +0800)]
gettext: Get gettext use its own libunistring
According to its documentation, gettext 0.18.1.1 needs either
libunistring or it will use its own internal version. Just add
a configure option '--with-included-libunistring' to force the
latter to avoid races.
[YOCTO#1934]
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
James Limbouris [Tue, 28 Feb 2012 03:49:06 +0000 (11:49 +0800)]
mtd-utils: Don't use host 'ranlib' or 'ar'.
If ranlib, ar, or cc are not supplied to make, it attempts to use ${CROSS}xxx.
Since ${CROSS} is not set, host ranlib may run, producing an unusable .a file on some platforms.
Signed-off-by: James Limbouris <james@digitalmatter.com.au>
multilib.bbclass: allow TARGET_VENDOR_virtclass-multilib to be overriden
If we set this bit, we can override the ugly "pokymllib32" to back to
"poky" (powerpc-pokymllib32-linux-gcc -> powerpc-poky-linux-gcc). I've
left this unset by default, but can be set by adding the following:
TARGET_VENDOR_virtclass-multilib-lib32 = "-poky"
Signed-off-by: Matthew McClintock <msm@freescale.com>
