Jack Mitchell [Thu, 13 Sep 2012 12:27:21 +0000 (13:27 +0100)]
local.conf.sample: change valgrind support architecture comment
The comment for debug-tools states valgrind will only be installed for x86
targets. This is not true as valgrind now supports x86*, PPC* and ARMv7a;
delete the comment as the architecture support is now so varied.
Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 14 Sep 2012 04:57:27 +0000 (00:57 -0400)]
linux-yocto/3.4: make uprobes select perf events
uprobes depends on functionality provided by perf events. After
uprobes was enabled in the standard kernel the mpc8315 board showed
link errors due to missing perf event functions.
This problem isn't isolated to the board or powerpc arch, but all
other boards have PERF_EVENTS enabled. To fix this, we make UPROBE_EVENT
select PERF_EVENTS, and any new boards will be protected from the
same failure.
We also update the configuration fragments since CONFIG_UPROBES depends on
CONFIG_PERF_EVENTS being set, so PERF_EVENTS needs to be added whenever
uprobes are enabled.
[YOCTO #3111]
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Richard Purdie [Fri, 14 Sep 2012 08:41:59 +0000 (09:41 +0100)]
bitbake.conf: Assign SRCPV so that it will be tracked correcting in the sstate checksum
Currently, SRCPV is just listed as having a value of ${@bb.fetch2.get_srcrev(d)}
which isn't helpful. This can mean that if PV changes, two recipes can have the
same sstate checksum despite having different PV values since the PV value itself
isn't tracked anywhere.
Adding this line means that the real PV value is expanded and recorded in the sstate
checksum, meaning the sstate packages no longer overlap. This is critical in ensuring
consistent builds for revipes using SRCPV.
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 13 Sep 2012 22:40:29 +0000 (23:40 +0100)]
opkg: Fix package dependency issue for preinsts
When processing dependencies, we need to look for both the SW_INSTALL and
SW_UNKNOWN states. If we don't do this, dependencies can be missed
and preinst scripts can run before dependencies are all installed.
This leads to package installation errors for packages like dbus-1
and associated user permission errors.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Andrei Gherzan [Thu, 13 Sep 2012 22:22:26 +0000 (01:22 +0300)]
taglib: Update to v1.8
Patches not needed anymore - they switched to cmake.
LGPL license was replaced with the actual LGPL 2.1 file.
License section in audioproperties.h file was modified as it includes the
new address of Free Software Foundation.
libtag static library is not built by default anymore and if cmake is
instructed to build static library than shared library is deactivated.
So actually this is a switch now.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Bruce Ashfield [Thu, 13 Sep 2012 12:59:08 +0000 (08:59 -0400)]
kernel-yocto: fix kernel configuration audit for custom yocto kernels
It was reported that the kernel configuration checks for custom yocto
kernels had the following output:
NOTE: validating kernel configuration
grep: /meta-series: No such file or directory
grep: /meta-series: No such file or directory
WARNING: Can't find any BSP hardware or required configuration fragments.
WARNING: Looked at //cfg///hdw_frags.txt and //cfg///required_frags.txt in directory: //cfg//
NOTE: Tasks Summary: Attempted 375 tasks of which 367 didn't need to be rerun and all succeeded.
which is not inspire confidence in the output of the process.
Completely inhibiting the check is one option to remove the messages,
but that removes the ability see output, which can help move users to
a better or more fully configured linux-yocto based kernel.
To fix this, we have to ensure that the path to the meta-series is
always valid, and that the tools can deal with not all files existing
in the audit directory.
Since custom yocto kernels do not set KMETA (they don't have a meta branch),
we ensure that a default of 'meta' is passed to the audit ('meta' is always
valid), and that kconf_check itself can deal with an incomplete set of
input audit files.
The net result is output like this (using a defconfig with invalid options
for the kernel being built):
NOTE: validating kernel configuration
This BSP sets 19 invalid/obsolete kernel options.
These config options are not offered anywhere within this kernel.
The full list can be found in your kernel src dir at:
meta/cfg/standard/qemux86/invalid.cfg
There were 1 instances of config fragment errors.
The full list can be found in your kernel src dir at:
meta/cfg/standard/qemux86/fragment_errors.txt
The full list can be found in your kernel src dir at:
meta/cfg/standard/qemux86/missing_required.cfg
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Peter Seebach [Thu, 13 Sep 2012 18:29:59 +0000 (13:29 -0500)]
pseudo_1.4.1.bb: update to pseudo 1.4.1, fixing 32-bit host problems
There were a number of cases where pseudo used plain old stat()
to get dev/inode data for files; on 32-bit hosts, this could fail
if the files were over 2GB, causing pseudo to prevent removing of
large files. This is fixed in 1.4.1.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Thu, 13 Sep 2012 16:23:12 +0000 (17:23 +0100)]
scripts/combo-layer: ensure we validate branch/revision on init
If both branch and last_revision are specified for a component when
combo-layer init is run, ensure that the specified revision is actually
on the specified branch and error out if not. Also ensure that the error
message mentions the component.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Thu, 13 Sep 2012 16:23:11 +0000 (17:23 +0100)]
scripts/combo-layer: use last_revision if specified in init
If last_revision is specified for a component when running combo-layer
init, then use that revision instead of the latest revision on the
branch. Also, remove unnecessary git checkout during init since we
specify the revision to all calls to git when dealing with the component
repositories.
Fixes [YOCTO #3040].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Andrei Dinu [Thu, 13 Sep 2012 08:26:45 +0000 (11:26 +0300)]
libffi upgrade to 3.0.11
Changes :
- Added ax_append_flags.m4 and ax_check_compile_flag.m4 to the m4 directory.
The files were missing and aclocal.m4 was generated without those two macros.
- Added a new license md5 checksum to the recipe because the old LICENSE file
differs from the new one here :
OLD : libffi - Copyright (c) 1996-2011
NEW : libffi - Copyright (c) 1996-2012
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Jack Mitchell [Thu, 13 Sep 2012 12:58:30 +0000 (13:58 +0100)]
git: define NO_PYTHON=1 to stop git requiring python as a dependancy
Git requires python by default as an included script to link git
to perforce is written in Python. Define NO_PYTHON to stop the
script being included and thus remove the dependancy on Python.
Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Andrei Gherzan [Mon, 10 Sep 2012 16:26:27 +0000 (19:26 +0300)]
image_types.bbclass: Round up ROOTFS_SIZE after base_size check
If we round up ROOTFS_SIZE to IMAGE_ROOTFS_ALIGNMENT before checking if
base_size is greater then IMAGE_ROOTFS_SIZE, we can end up adding an
unaligned value to IMAGE_ROOTFS_SIZE. Obviously, if
IMAGE_ROOTFS_EXTRA_SPACE was overwritten with an unaligned value. So
let's add the round up code after the base_size calculus and it's
comparison.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Constantin Musca [Wed, 12 Sep 2012 11:58:18 +0000 (14:58 +0300)]
patch.bbclass: Use one TMPDIR per patching process
We must use one TMPDIR per process (/tmp/${PID}) so that the patching
processes don't generate the same temp file name (the "patch" program
uses the TMPDIR environment variable for deciding where to create the
temp files).
[YOCTO #3070]
Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
runqemu: Explicitly specify MACHINE when calling bitbake
When using runqemu with distros outside oe-core then
MACHINE may not be there in local.conf so use the one
thats available in environment of runqemu which is actually
the correct one.
Darren Hart [Wed, 12 Sep 2012 04:17:07 +0000 (21:17 -0700)]
rt: Add hwlatdetect to rt images
This adds the newly separated hwlatdetect package to the rt images.
While this pulls in a python dependency, it is worth have hwlatdetect
installed by default on these images as they are intended to assist in
the evaluation of platforms for use in real-time environments.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Wed, 12 Sep 2012 04:17:06 +0000 (21:17 -0700)]
rt-tests: Add hwlatdetect package
Split out rt-tests into rt-tests and hwlatdetect packages as the latter
requires python and we want to be able to install the core rt-tests on
minimal systems without python.
This also addresses QA warnings about the hwlatdetect files not being
packaged.
Add an RRECOMMENDS on the hwlat kernel module package for the new
hwlatdetect package as the python test requires the kernel module to
function properly (but we probably don't want to kill a build if the
exact kernel module package is not available).
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Zhenhua Luo [Wed, 12 Sep 2012 08:20:46 +0000 (16:20 +0800)]
valgrind: fix debug info reading error when do memcheck on ppc targets
following is the error message:
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /lib/ld-2.13.so:
--2263-- Can't make sense of .got section mapping
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /home/root/lzh:
--2263-- Can't make sense of .data section mapping
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /usr/lib/valgrind/vgpreload_core-ppc32-linux.so:
--2263-- Can't make sense of .data section mapping
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /usr/lib/valgrind/vgpreload_memcheck-ppc32-linux.so:
--2263-- Can't make sense of .data section mapping
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /lib/libc-2.13.so:
--2263-- Can't make sense of .data section mapping
Signed-off-by: Zhenhua Luo <b19537@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 11 Sep 2012 15:04:41 +0000 (15:04 +0000)]
linux-yocto/3.4: add x32 configuration fragment
When x32 is the tuning for a x86 MACHINE, the kernel should also have
CONFIG_X86_X32=y. This adds a x32 fragment that can be used to trigger
the right ABI.
The commit also contains a check for mx32 in TUNE_FEATURES, and if
present, the new fragment will be appended to KERNEL_FEATURES and
trigger the support in the kernel.
cc: Saul Wold <sgw@linux.intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Phil Blundell [Tue, 11 Sep 2012 18:14:25 +0000 (19:14 +0100)]
eglibc: Restore ${PN} to before ${PN}-dev in PACKAGES
Commit 13544fbc6217fee1731a6da1e2cf94901a500842 changed the ordering
of PACKAGES so that ${PN}-dev came before ${PN}. However, this caused
the FILES matching to go wrong if ${libdir} == ${base_libdir}. Fix this
by moving ${PN} ahead of ${PN}-dev once again.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Saul Wold <sgw@linux.intel.com>
sysvinit-inittab_2.88dsf.bb: only run serial checks at boot if we have items to check
Right now, we delay running the serial console checks to we boot up. This causes
issues for read only file systems. So, if have not configured any serial ports to
check via SERIAL_CONSOLES_CHECK we can skip the check at boot. This fixes any
issues with read only file systems and ipk packaging.
Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Bruce Ashfield [Tue, 11 Sep 2012 13:05:14 +0000 (09:05 -0400)]
linux-yocto*: append to KERNEL_FEATURES instead of assigning
It is sometimes useful for KERNEL_FEATURES to be set in a machine
or other configuration file. The linux-yocto recipes currently
initialize the variable, which clobbers any values set by .conf
files.
Appending to the variables allows these settings to propagate to
the kernel configuration, while maintaining the existing set of
added kernel features.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Richard Purdie [Tue, 11 Sep 2012 14:22:29 +0000 (15:22 +0100)]
autotools.bbclass: Add functionality to force a clean of ${B} when reconfiguring (and ${S} != ${B})
Unfortunately whilst rerunning configure and make against a project will mostly
work there are situations where it does not correctly do the right thing.
In particular, eglibc and gcc will fail out with errors where settings
do not match a previously built configuration. It could be argued they are
broken but the situation is what it is. There is the possibility of more subtle
errors too.
This patch adds removal of the build directory (${B}) when configure is
rerunning, the sstate checksum for do_configure has changed and ${S} != ${B}.
We could simply use a stamp but saving out the previous configuration checksum
adds some data at no real overhead.
If we find there are things where we want to disable this behaviour with
CONFIGURESTAMPFILE = "" in the recipe, or users could disable it globally.
[YOCTO #2774]
[YOCTO #2848]
This is particularly helpful for eglibc and gcc which use split builds by default and
are a particular source of reconfigure type problems.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
User mode emulation binaries are linked using a local linker script. The
nativesdk ones were not used and the resulting binaries did not have the
interp section resized. Hence, those binaries could not be relocated.
Martin Ertsaas [Tue, 11 Sep 2012 08:30:18 +0000 (10:30 +0200)]
gettext: Make gettext 0.16.1 extend native and nativesdk.
gettext 0.16.1 is a GPLv2 version of gettext. Making that extend native and
nativesdk makes sure we use the same version of gettext for compiling internally
as well as in our toolchain.
Signed-off-by: Martin Ertsaas <mertsas@cisco.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Bruce Ashfield [Mon, 10 Sep 2012 17:51:00 +0000 (13:51 -0400)]
linux-yocto/3.4: v3.4.10 and uprobes/kprobes configuration updates
Updating to 3.4.10 which has been soaking for a bit now, as well
as picking up the following meta commits from Tom Z:
a82db2f meta: have systemtap use kprobes and uprobes feature d5d5b80 meta: add kprobes support to ktypes/standard b32d373 meta: add kprobes feature d40ed99 meta: have uprobe feature use uprobe.cfg a69d1db meta: add uprobe.cfg
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
gcc-4.7: Backport libgcc fixes to appease the new build sequence
This makes the libgcc builds identical when done with gcc-cross-initial
or final gcc-cross. Since eglibc only sees gcc-cross-initial it is
important that the final libgcc that appears on root file system is same
as the one against which eglibc was built.
Ross Burton [Mon, 10 Sep 2012 16:02:22 +0000 (17:02 +0100)]
webkit-gtk: work around Make bug by re-running make
GNU make 3.82 has a bug where it drops required dependencies.
https://bugs.webkit.org/show_bug.cgi?id=79498 is the WebKitGTK+
bug, and http://savannah.gnu.org/bugs/?30653 is the GNU Make bug.
Work around this by running make again if it fails just in case the failure is
due to the bug.
Based on a patch by Andreas Müller <schnitzeltony@googlemail.com>.
[ YOCTO #2816 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Phil Blundell [Sun, 9 Sep 2012 10:48:45 +0000 (11:48 +0100)]
shadow-native: Ensure that ${sbindir} and ${base_sbindir} are respected
These values need to be passed on the command line to "make install" otherwise
shadow will use its own built-in idea of where those directories are located.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Phil Blundell [Sun, 9 Sep 2012 10:22:53 +0000 (11:22 +0100)]
shadow: Fix various invalid assumptions about directory layout
The makefiles in the shadow package have their own hard-coded paths
for ${base_bindir} and ${base_sbindir} (known as "bindir" and "sbindir"
in shadow-speak). Ensure that they install into our paths rather than
their own.
Also check that ${base_bindir} and ${bindir} are different before trying
to move files from one to the other; likewise for ${base_sbindir} and
${sbindir}.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Phil Blundell [Sun, 9 Sep 2012 09:13:08 +0000 (10:13 +0100)]
perl-native: PROVIDE libmodule-build-perl-native for consistency with non-native perl
This module is, apparently, included in the standard perl distribution
since 5.10.1 or so. The regular perl recipe has had this PROVIDES for a
while but it seems to have been overlooked in the native version.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Mark Hatle [Fri, 7 Sep 2012 22:07:11 +0000 (17:07 -0500)]
qt4: Update qt4.inc to remove staticdev deps in -dbg packages
It appears that the qt4.inc had a copy/paste error relating to creating
a list of staticdev packages, that caused them to show up as dependencies
in the -dbg package.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Mark Asselstine [Sat, 8 Sep 2012 13:42:21 +0000 (08:42 -0500)]
base-files: provide a mechanism to skip creation of the hostname file
The existence of a /etc/hostname file causes any hostname provided on
the kernel command line or via dhcp to be overwritten by the
initscripts 'init.d/hostname.sh'. This change allows you to set a
value of "" for 'hostname' which will skip the creation of the
/etc/hostname file by the base-files package.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Mark Hatle [Fri, 7 Sep 2012 22:05:44 +0000 (17:05 -0500)]
package_rpm.bbclass: Avoid unnecessary installs in complementary pass
When called with the complementary install option, the first step is to
backup the install manifest so that we can avoid installing items previously
installed. However, this backup process skipped the initial_install portion
of the manifest, causing early install items like libc6, bash, and base-files
to be installed a second time.
Fix this by cating the files to original_solution. This is done as an append to
allow multiple calls to package_install_internal_rpm to work.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Mon, 10 Sep 2012 12:58:10 +0000 (13:58 +0100)]
classes/packageinfo: use better method to check if package exists
Instead of using a rather error-prone method of looking for output
package files in order to determine if a package got created, use the
.packaged file within pkgdata.
This fixes two separate issues:
* Some packages apparently not being found by this code e.g. all
apm/apmd packages when using ipk packaging.
* Buggy implementation of this checking code which triggered an
exception during the event handler if PKGV was overridden on a
per-package basis (as it is with external-sourcery-toolchain), which
blocked Hob from completing parsing at 99% - fixes [YOCTO #2651].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 27 Aug 2012 20:45:14 +0000 (20:45 +0000)]
lib/oe/sstatesig.py: add signature data query function
Add a function that can be used from BitBake code which will find
signature data (sigdata/siginfo) files based on specified criteria, and
hook it into BitBake as bb.siggen.find_siginfo.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LSB needs wget to download packages but wget provided by busybox doesn't
support some options such as '-N'.
LSB perl test 4.1.6-2 case all/tst_perlModPresent.pl,
../lib/Class/ISA/t/00_about_verbose and ../lib/Class/ISA/t/01_old_junk.t
fail because of lack of these modules, add them to make test pass.
File CORE/config.h which is provided by perl-dev and file
unicore/version which is provided by perl-doc are required by LSB perl
test cases.
Add perl-dev and perl-doc to packagegroups-core-lsb.
[Yocto #3030 #3031 #3052 #3054 #3055]
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Rebased for packagegroup change -sgw
These perl libraries are being added directly to OE-Core for 4.1
LSB Complainace, when 5.0 comes out early next year (2013), we will
remove these changes.
