Tom Zanussi [Tue, 31 Dec 2013 19:59:24 +0000 (13:59 -0600)]
systemtap: Add --enable-prologues to configuration
In some cases, the debuginfo generated by the compiler is insufficient
for systemtap to figure out function param locations; using -P allows
it to use prologue searching to find the correct locations.
Enable prologue searching in the configuration so the user doesn't
have to specify it manually.
Fixes [YOCTO #5403].
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jacob Kroon [Mon, 30 Dec 2013 18:17:58 +0000 (19:17 +0100)]
meta/lib/oe/terminal.py: Don't pass non-supported '--disable-factory' flag to gnome-terminal
By default, all GNOME terminals share a single process,
reducing memory usage. This can be disabled by starting gnome-terminal
with the --disable-factory option
However, gnome-terminal in Fedora 20 does no longer support the
'--disable-factory' flag, so remove it. As the support for 'mate' terminals was
added as a copy of the gnome code in 8cc078a9c679845464c59028f584d7aba098cc1f,
remove the flag here aswell.
Signed-off-by: Jacob Kroon <jacob.kroon@mikrodidakt.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Mon, 30 Dec 2013 14:50:18 +0000 (15:50 +0100)]
kmod: fix zlib dependency
* unlike BBCLASSEXTENDed native support, dependencies in kmod-native doesn't get
automatic -native suffix, so kmod-native was depending on target zlib.
* move the dependency from .inc and apply it with right suffix
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids the following error messages when no dependency
issue detected:
find: `/build/r_cgp-dep_1225/p_x86_1225/bitbake_build/tmp/work/': No such file or directory
grep: test-dependencies/1388042399/3_min/failed/*: No such file or directory
ls: cannot access test-dependencies/1388042399/3_min/failed/*: No such file or directory
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -with-cxx changed to with-cxx-main sometime around the 2.5 time frame
It appears that there never was a with-cyclic-gc configure option, or if
there was it was from some past patch we no longer have.
This option appears to be commented out in the configure.ac with no explaination,
It does not appear to be commented out in the source, so it occurs during the sqlite
release process!
Paul Eggleton [Wed, 29 May 2013 16:27:51 +0000 (17:27 +0100)]
bitbake.conf: set a default for MACHINE_FEATURES
Ensure that if MACHINE_FEATURES is not set by the machine config that we
don't end up with expansion errors during parsing. Technically since the
introduction of MACHINE_FEATURES_BACKFILL = "rtc" this is unlikely to be
a problem unless "rtc" is also added to
MACHINE_FEATURES_BACKFILL_CONSIDERED, however we should be consistent
with DISTRO_FEATURES which is defaulted in bitbake.conf.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Paul Eggleton [Sun, 22 Dec 2013 00:21:41 +0000 (00:21 +0000)]
stat: tidy up recipe
* Add SUMMARY
* Tweak DESCRIPTION
* Use PV in SRC_URI
* Drop commented-out function that we obviously don't need
* Move BBCLASSEXTEND to end to match with convention
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Paul Eggleton [Sat, 21 Dec 2013 23:42:47 +0000 (23:42 +0000)]
linux-dummy: set LICENSE to GPLv2 to avoid license warning
This recipe doesn't actually produce any non-empty packages, but since
it's pretending to be a Linux kernel it might as well pretend to have
the same license, if for no other reason than to avoid producing a
warning since the previous value ("GPL") isn't acceptable.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Paul Eggleton [Sat, 21 Dec 2013 22:51:12 +0000 (22:51 +0000)]
Add missing SUMMARY values
These recipes all had a long DESCRIPTION but no SUMMARY; since the
SUMMARY is often displayed alone by package managers and the default
value ("${PN} version ${PV}") isn't particularly useful, we should
always try to set SUMMARY.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Paul Eggleton [Thu, 19 Dec 2013 15:13:01 +0000 (15:13 +0000)]
Replace one-line DESCRIPTION with SUMMARY
A lot of our recipes had short one-line DESCRIPTION values and no
SUMMARY value set. In this case it's much better to just set SUMMARY
since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY
is at least useful. I also took the opportunity to fix up a lot of the
new SUMMARY values, making them concisely explain the function of the
recipe / package where possible.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Paul Eggleton [Sat, 21 Dec 2013 13:06:07 +0000 (13:06 +0000)]
Replace OpenedHand Bugzilla in BUGTRACKER
This site no longer exists, and all of these are now (semi-)maintained
on yoctoproject.org infrastructure, so set BUGTRACKER to point to the
Yocto Project Bugzilla.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Robert Yang [Sun, 29 Dec 2013 03:06:02 +0000 (11:06 +0800)]
gstreamer1.0: remove unrecognised options
Remove the following two unrecognised options:
* --disable-oggtest
* --disable-vorbistest
They are defined in m4/ogg.m4 and m4/vorbistest.m4, but now configure
doesn't use them, configure.ac uses another way to define the
--enable-ogg and --enable-vorbis, and there is no test options, so
remove them.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Robert Yang [Sat, 28 Dec 2013 03:58:17 +0000 (11:58 +0800)]
dpkg: fix/remove unrecognised options
Fix/remove the following unrecognised options:
* --without-static-progs: can't find anything about this in the history,
so remove it.
* --without-dselect -> --disable-dselect
* --with-start-stop-daemon -> --enable-start-stop-daemon
* --with-bz2lib, typo, should be --with-bz2
* --without-sgml-doc: the sgml doc had been removed from dpkg, so
remove it.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Robert Yang [Sat, 28 Dec 2013 03:29:24 +0000 (11:29 +0800)]
tremor: remove unrecognised option
Remove the --disable-rpath, it seems taht there is never such an option
in tremor's configure, and it uses our libtool, so we don't have to
worry about the rpath.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Saul Wold [Fri, 20 Dec 2013 18:47:26 +0000 (10:47 -0800)]
openssl: use PACKAGECONFIG to disable perl bits
Adding perl to the RDEPENDS caused a performance hit to the overall build time since this was
the only package that depended on perl. The openssl-misc package is not installed by default
so use a PACKAGECONFIG which can be overridden to allow the perl scripts along with perl to
be installed.
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alexandru DAMIAN [Wed, 18 Dec 2013 19:24:47 +0000 (19:24 +0000)]
toaster.bbclass: fix crash on buildstats collection
Toaster needs buildstats to be enabled in order to
collect task statistics. The toaster.bbclass didn't
have a guard to stop task data collection if the buildstats
weren't enabled, leading to a crash.
This patch verifies that the task variables are defined before
trying to use them.
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristiana Voicu [Fri, 20 Dec 2013 09:43:49 +0000 (11:43 +0200)]
valgrind: upgrade to 3.9.0
Changed patches directory to "valgrind";
Removed 4 patches because they were merged upstream;
Updated 2 patches because now it has configure.ac instead of .in;
Changed license md5 for 2 files because of a small change for copyright
year
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Fri, 20 Dec 2013 14:55:09 +0000 (14:55 +0000)]
libav: add libpostproc to PROVIDES (for 0.8.x version only)
There is a separate libpostproc recipe in meta-oe for use with 9.x and
later versions of libav for those few that need libpostproc; however if
you just add meta-oe and try to build libpostproc without selecting the
libav 9.x version recipe, you'll be building the libpostproc recipe
together with libav 0.8.x, which provides its own libpostproc; this
leads to confusing errors at packaging time. In order to flag up that
these conflict more appropriately, add libpostproc to PROVIDES
explicitly so that you at least get a multiple providers error at the
start of the build.
Fixes [YOCTO #5335].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 20 Dec 2013 17:16:25 +0000 (17:16 +0000)]
terminal: Exclude BB_ORIGENV from the signatures
devshell was printing a traceback when exiting due to the use of dump_sigs()
being called on the task. This is turn was since this function referenced
BB_ORIGENV. We might as well globally exclude this for now since its a
data store object and cannot be pickled, not would it make sense to do so.
[YOCTO #5683]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 20 Dec 2013 12:08:56 +0000 (12:08 +0000)]
sstate/sstatesig: Add populate_lic to list of arch invariant sstate tasks
Like fetch, unpack and patch, populate_lic doesn't vary between different
archs so we should mark it as such. This means better sstate cache reuse
with fewer duplicate files as well as less confusing sstate debugging.
sstatesig also needs to account for the fact BPN is used for sstate files
in these cases.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 20 Dec 2013 12:06:41 +0000 (12:06 +0000)]
bitbake.conf: Exclude WORKDIR changes from sstate checksums
The layout of stamp files ensures that changes to WORKDIR mean recipes get rebuilt correctly.
Since WORKDIR usually contains MULTIMACH_TARGET_SYS and that depends on tune variables,
including WORKDIR in sstate checksums adds a lot of noise to the system for what amounts to
no gain.
On the other hand, removing it reduces noise, reduces the size of the siginfo files and
reduces the amount of processing bitbake has to do. It therefore seems like dropping it
from the checksums is an all around win.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 20 Dec 2013 12:06:02 +0000 (12:06 +0000)]
sstate: Convert to use ':' as a filename sperator and use SSTATE_SWSPEC globally
Currently the code has problems differentiating between "gcc-cross" and "gcc-cross-initial"
sstate files. We could add in a ton of special casing but tests show this isn't scaling
well. Using a more unique separator resolves the issue.
The choice of which separator to use is a hard one. We need something which isn't commonly
used in PN, PV, PR, *_OS and *_ARCH which rules out '-', '_' and it needs to work ok with
webservers/http which makes ';' and '%' harder.
The change also sets SSTATE_SWSPEC globally since writing out differently named siginfo
files for the fetch/unpack/patch tasks is a waste of diskspace, the hashes match for
all PN in the majority of cases and if they don't, its not a big issue as the hash is
different. This makes the results from sstate debugging more understandable.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Valentin Popa [Thu, 19 Dec 2013 14:02:57 +0000 (16:02 +0200)]
runqemu: Allow user to set -vga option with qemuparams
At the moment, the user cannot to set -vga other then vmware
(because "vmware" is set by default); and the first argument
in qemuparams has higher precedence.
Stefan Stanacar [Wed, 18 Dec 2013 19:02:05 +0000 (21:02 +0200)]
lib/oeqa/runtime: rewrite the systemd test module
They are basically the same tests but:
- they look cleaner, using one single method / assert
- output from unittest will be cleaner (and includes a verbose status when needed)
- they are better grouped and use a real, active, enabled service
(machineid will be dropped and hostnamed was a static service)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Cristian Iorga [Thu, 19 Dec 2013 09:34:52 +0000 (11:34 +0200)]
libtirpc: upgrade to 0.2.4
obsolete_automake_macros.patch removed,
no longer needed.
Disabled GSS APIs, as those APIs are
not present in our distro.
Patches directory is now generic,
as patches are not created for a specific version.
Richard Purdie [Thu, 19 Dec 2013 09:40:10 +0000 (09:40 +0000)]
sstatesig: Correctly handle matches spanning stamps and sstatedir
By resetting filesdates at this point, we lose matches from stamps which
may not have been in sstatedir. When we don't have hashes specicifed,
its better to return all matches and have the caller decide which are
relavent and which are not since this function has no ability to
decide. There will almost always be one match from stamps we need
to keep and refer to.
Richard Purdie [Thu, 19 Dec 2013 09:39:35 +0000 (09:39 +0000)]
sstatesig: Update for the removal of sstate-name
We've dropped sstate-name so we can remove this code. The fallback was
incorrect since we use taskname without the do_ prefix so this patch
updates to account for that too.
Richard Purdie [Thu, 19 Dec 2013 09:38:18 +0000 (09:38 +0000)]
sstatesig: Ensure we return all matches for find_sigdata
When the hashes to find isn't specified we need to return matches from both
the sstate cache and the local stamps directory regardless of how many we've
found so far. If we don't do this, we can miss stamps and the comparison is
less accurate/incorrect.
Richard Purdie [Wed, 18 Dec 2013 17:12:23 +0000 (17:12 +0000)]
ptest: Fix dependency/ordering issue
We've seen occasional issues on the autobuilder where files appear during
do_populate_sysroot and this is due to the ptest installation happening
in parallel. This fixes the order to be deterministic.
Ross Burton [Wed, 18 Dec 2013 16:20:07 +0000 (16:20 +0000)]
systemd: delete files that end up in /var/volatile
${localstatedir}/log/journal is created by tmpfiles.d on boot, and the README
just causes warnings that /var/volatile isn't empty when mounting on top of it.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 18 Dec 2013 16:20:06 +0000 (16:20 +0000)]
systemd: pass --root in prerm if running on host
If a systemd image is built without a package manager then packages will be
removed from an image during rootfs generation, but without passing --root the
systemctl will look on the *host* system.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 18 Dec 2013 16:20:02 +0000 (16:20 +0000)]
useradd.bbclass: add dependency on base-files
Packages that use useradd.bbclass should have a dependency on base-files so that
the /etc/skel directory is populated. Without this dependency base-files may or
may not be installed when the postinst runs, and the skel content may or may not
be copied.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 18 Dec 2013 13:56:02 +0000 (13:56 +0000)]
sstate: Get rid of crazy name mapping
When originally developed, it was thought a task may have more than one associated
sstate archive. The way the code has grown that idea is now not possible or needed.
We can therefore assume one sstate archive per task and drop the crazy name
mapping code. Simpler is better in this case.
The downside is that various sstate archives will change name so this forces a cache
rebuild. Given the other sstate changes going in at this time, this isn't really
a bad thing as things would rebuild anyway.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
