Richard Purdie [Thu, 4 Feb 2016 08:31:07 +0000 (08:31 +0000)]
patchelf: Add patch to handle large files
There were "maximum size exceeded" errors from patchelf when processing
qemu-native. There is an issue open for this upstream, add a patch
proposed there for this issue. "32" was increased to "64" to handle our
qemu-ppc binary.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
This if branch is causing the following error during do_rootfs:
"Exception: UnboundLocalError: local variable 'cfg_file' referenced
before assignment". This happends because the cfg_file variable is
defined at a deeper nesting level (just above the if branch).
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Randy Witt [Thu, 4 Feb 2016 20:31:44 +0000 (12:31 -0800)]
populate_sdk_ext: Add support for a "minimal" type
If the user sets the SDK_EXT_TYPE variable to "minimal" then the sdk won't
contain any sstate. The sstate can come from an sstate mirror and be
installed on demand as usual.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Randy Witt [Thu, 4 Feb 2016 20:31:42 +0000 (12:31 -0800)]
toolchain-scripts.bbclass: Use PYTHONPATH instead of PYTHONHOME
In the extensible sdk it was originally intended that the native sstate
would always be setscened as part of the sdk installation. However, the
soon to come "minimal" sdk won't do that.
A side effect of that is that pointing PYTHONHOME at the native sysroot
within the "bitbake workspace" won't work. For now only set PYTHONPATH
instead and continue using the python that comes from buildtools.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Randy Witt [Thu, 4 Feb 2016 20:31:41 +0000 (12:31 -0800)]
copy_buildsystem.py: Pass the nativelsb argument to gen-lockedsig-cache
If the nativelsb argument is not used, then create_locked_sstate_cache()
can get collisions when moving the files from the input_sstate_cache
to the output_sstate_cache.
The specific case where this was encountered was when a "universal"
nativelsb directory already existed in the input_sstate_cache.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Fri, 5 Feb 2016 20:50:34 +0000 (20:50 +0000)]
gtk-theme-torturer: remove from oe-core
This recipe is very old, unmaintained, not used at all in OE-Core, and not
useful in a world that has moved to GTK+ 3 (even if Sato is slow at catching
up).
Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Sat, 6 Feb 2016 12:30:02 +0000 (12:30 +0000)]
bitbake.conf/native/nativesdk: Set PKG_CONFIG_SYSTEM_ at top level
Setting PKG_CONFIG_SYSTEM_{HEADERS/INCLUDE}_PATH for nativesdk isn't
enough, we also need to deal with multlib cases where libdir from
pkg-config-native isn't correct. Native builds are about the only
case where this variable shouldn't be set.
Therefore move the code from nativesdk to bitbake.conf and unexport it
in the native case.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Thu, 4 Feb 2016 16:29:53 +0000 (16:29 +0000)]
pango: unset LDFLAGS when building gen_all_unicode
When building the native gen_all_unicode binary we need to also unset LDFLAGS as
otherwise the *target* LDFLAGS will be used. At best the options are harmless
but if there are options that the host compiler doesn't support then the compile
will fail. For example, if the host gcc is version 4.8 but LDFLAGS contains
-fstack-protector-strong which in 4.9 onwards.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Fri, 5 Feb 2016 10:51:32 +0000 (10:51 +0000)]
nativesdk: Set PKG_CONFIG_SYSTEM_ variables
When building nativesdk recipes, we noticed paths going into .pc files
which should have been suppressed since these were standard library
search paths. pkgconfig-native sets these variables to sane values
for native recipes, we need it set to values for our specific library
paths in the nativesdk case.
Setting these values cleans up the .pc files and suppresses the paths.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Fri, 22 Jan 2016 20:45:03 +0000 (20:45 +0000)]
local.conf.sample.extended: Document HOW-TO enable systemd or busbox for init system
OE core provides systemd,busybox as options for system init system along
with sysvinit being the default. Document the needed settings to enable
systemd and busybox as options if user wishes.
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 4 Feb 2016 12:38:50 +0000 (12:38 +0000)]
insane: Fix populate_sysroot sanity test path
This was correct for native/cross paths but not for target ones which
meant the tests weren't running in some cases. Fix the path to be
correct in both cases.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Wed, 3 Feb 2016 21:17:11 +0000 (13:17 -0800)]
gnutls: update 3.4.8 -> 3.4.9
This version fixes bugs in the current stable branch.
* Version 3.4.9 (released 2016-02-03)
** libgnutls: Corrected ALPN protocol negotiation. Before GnuTLS would
negotiate the last commonly supported protocol, rather than the
first. Reported by Remi Denis-Courmont (#63).
** libgnutls: Tolerate empty DN fields in informational output
functions.
** libgnutls: Corrected regression causes by incorrect fix in
gnutls_x509_ext_export_key_usage() at 3.4.8 release.
** API and ABI modifications:
No changes since last version.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Maxin B. John [Wed, 3 Feb 2016 14:47:40 +0000 (16:47 +0200)]
linux-firmware: update to latest revision 52442afee
- Update to latest linux-firmware
- Renamed qat_dh895xcc_firmware to qat_firmware based on commit 8d1f7a11
- Updated license info for the ath9k_htc firmware
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Wed, 3 Feb 2016 16:34:52 +0000 (16:34 +0000)]
license.bbclass: add LICENSE_CREATE_PACKAGE to perform_packagecopy vardeps
This class has a perform_packagecopy_prepend() that uses LICENSE_CREATE_PACKAGE,
but the BitBake variable dependency code doesn't know that oe.data.typed_value()
is a getter. Until BitBake knows this, add an explicit vardeps.
[ YOCTO #5635 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
That commit completely breaks KBUILD_DEFCONFIG because it relies on
$ARCH to match between the target OE arch and the kernel subdirectory
containing the defconfigs. In the kernel all defconfigs for everything
x86-based (including x86_64) is stored in dir arch/x86/configs/
kernel-yocto.bbclass correctly searches for all the defconfigs inside
${S}/arch/${ARCH}/configs/${KBUILD_DEFCONFIG}
Commit 8d310b249 makes it search in wrong places and _only_ if you
define TARGET_ARCH = "athlon" will it search x86 which is nonsensical.
The commit further adds an if clause to hack the mungled kernel arches
back to their original values (ugh) in do_shared_workdir which is run
after do compile, but of course the build breaks before that in
do_kernel_metadata because of the KBUILD_DEFCONFIG mentioned above (so
that hack is useless).
Please fix that corner case bug in another way which does not completely
screw up the kernel arch mapping & defconfig logic. If 64bit configs are
generated in the kernel for 32bit machines because the host is asked,
then it it a bug in the kernel, it is of no use to hack around it in OE.
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
changed util-linux priority to match busybox (50) which means sometimes
one and sometimes the other wins in image installs. We want util-linux to
win compared to busybox.
The old level (100) does conflict with other utils so pick 80 as a
good intermediate value.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Tue, 2 Feb 2016 21:59:35 +0000 (13:59 -0800)]
libxsettings-client: drop obsolete disable_Os_option.patch
This patch to configure.ac to change the default CFLAGS from -Os to
-O2 was added in 2010 as a workaround for a ppc specific bug which
affected gcc 4.5.x:
Maciej Borzecki [Tue, 2 Feb 2016 15:15:20 +0000 (16:15 +0100)]
wic: default to empty bootloader config
A kickstart file for non-x86 boards may have no 'bootloader' stanza. It
is the usual case if bootloader is setup using other mechanism than
through wic, and is for instance a part of u-boot configuration. In such
case the 'bootloader' field in the KickStart class will be
uninitialized. Instead of adding an empty bootloader line in every
kickstart file call the bootloader parser with empty argument list to
get defaults namespace.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Signed-off-by: Ross Burton <ross.burton@intel.com>
Chen Qi [Wed, 3 Feb 2016 07:50:21 +0000 (15:50 +0800)]
copy_buildsystem: add ability to exclude layers
In some cases, we may have some kind of download layers in BBLAYERS, so
that we can set BB_NO_NETWORK to "1". This results in extremely large
extensible SDK. And we actually don't need these download layers in the
SDK.
Add a new variable, SDK_LAYERS_EXCLUDE, to enable users to explicitly
exclude some layers when generating the extensible SDK.
[YOCTO #8878]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Elliot Smith [Tue, 2 Feb 2016 10:25:03 +0000 (10:25 +0000)]
toaster.bbclass: reinstate scan for artifacts in the sdk directory
During refactoring of the SDK/artifact scan code in toaster.bbclass,
the code to find other non-image artifacts in the images/ directory
was incorrectly removed.
Reinstate that code and clean it up so it's clearer what's happening
and so that non-image artifacts are correctly reported.
[YOCTO #8956]
Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Elliot Smith [Tue, 2 Feb 2016 10:25:02 +0000 (10:25 +0000)]
toaster.bbclass: attach image file scan postfunc to do_image_complete
The postfunc for finding image files after completion of a build
fails, as the image files we're interested in don't exist at the
point when the scan is currently done (following do_rootfs).
Attach the postfunc for scanning for image files to the new
do_image_complete task, which definitely runs after the image files
have been created.
[YOCTO #8956]
Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 25 Jan 2016 13:38:00 +0000 (13:38 +0000)]
meta: add ASSUME_PROVIDED dependency on wget-native for http fetches
For clarity and consistency, add a dependency on wget-native for any URIs that
will be fetched using the wget fetcher, and add wget-native to ASSUME_PROVIDED.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Tue, 2 Feb 2016 13:53:13 +0000 (13:53 +0000)]
sstate: Fix SSTATE_SWSPEC only used by populate_lic tasks
This variable is only used by populate_lic tasks (gcc-source overrides it)
and refers to BPN. In recipes like gcc, where there are multiple variants,
it is resulting in sstate objects which encode PN (they install into a PN subdir)
but the sstate object reflects BPN. This leads to corruption between then and
eventually, warnings from image builds like:
WARNING: The license listed GPLv3 was not in the licenses collected for recipe gcc
WARNING: The license listed GPL-3.0-with-GCC-exception was not in the licenses collected for recipe gcc
WARNING: The license listed GPLv3 was not in the licenses collected for recipe gcc
WARNING: The license listed NCSA was not in the licenses collected for recipe gcc-sanitizers
WARNING: The license listed MIT was not in the licenses collected for recipe gcc-sanitizers
WARNING: The license listed GPL-3.0-with-GCC-exception was not in the licenses collected for recipe gcc
WARNING: The license listed GPLv3 was not in the licenses collected for recipe gcc
WARNING: The license listed NCSA was not in the licenses collected for recipe gcc-sanitizers
By referring to PN, as used by license.bbclass, this issue is resolved.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 2 Feb 2016 13:52:38 +0000 (13:52 +0000)]
package.bbclass: Add data expansion to do_split_packages()
do_split_packages is often called with parameters which need expansion.
This happens to work at the moment since python functions are expanded
before execution but likely will not happen in future and isn't good
code practise.
Expand the common parameters do_split_packages() to avoid regressions.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 2 Feb 2016 13:50:47 +0000 (13:50 +0000)]
busybox/gtk/perl/base-passwd: Ensure data is correctly expanded
Where variables are used in python, we need to ensure they are expanded.
This happens to work at the moment but likely will not happen in future
and isn't good code practise.
Its mostly an issue around key values, since bitbake has already
performed key expansion when these functions are executed.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 2 Feb 2016 22:41:54 +0000 (22:41 +0000)]
piglit: don't use /tmp to write generated sources to
If there are multiple builds on the same machine then piglit writing it's
generated sources to /tmp will race. Instead, export TEMP to tell the tempfile
module to use a temporary directory under ${B}.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Mike Crowe [Tue, 2 Feb 2016 14:49:46 +0000 (14:49 +0000)]
pciutils: Explicitly set EXTRA_OEMAKE as required
The openssl recipe currently relies on EXTRA_OEMAKE having been set to
"-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make this
explicit so that the default in bitbake.conf can be changed.
Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mike Crowe [Tue, 2 Feb 2016 14:49:45 +0000 (14:49 +0000)]
openssl: Explicitly set EXTRA_OEMAKE as required
The openssl recipe currently relies on EXTRA_OEMAKE having been set to
"-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make this
explicit so that the default in bitbake.conf can be changed.
Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Randy Witt [Mon, 1 Feb 2016 23:51:51 +0000 (15:51 -0800)]
populate_sdk_ext: Add SSTATE_MIRRORS to config blacklist
SSTATE_MIRRORS used by the builder may not be the same as what the
installer of the sdk will use. Therefore blacklist SSTATE_MIRRORS from
the builder configuration. Note: the actual SSTATE_MIRRORS for the sdk
can be added using sdk_extra_conf.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 1 Feb 2016 16:21:24 +0000 (16:21 +0000)]
insane: add test for -dev packaging containing real libraries
PN-dev packages should generally contain the link-time symlinks from libfoo.so
to the real libraries. If a recipe installs a real library named libfoo.so
there's a very good chance that it's a loadable module and should be in another
package.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Mon, 1 Feb 2016 15:41:09 +0000 (15:41 +0000)]
libnl: package the libnl-cli modules in libnl-cli
The libraries that get installed into $libdir/libnl/cli/ are not development
libraries for linking against but loadable modules for the libnl-cli component,
so move them to the right package.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Fri, 29 Jan 2016 21:24:40 +0000 (21:24 +0000)]
remove-libtool: add new class
This class adds a postfunc to do_install to remove all .la files installed by
libtool, so that they are absent from both the sysroots and target packages.
If a recipe needs these files to be installed then it can be overridden by
setting REMOVE_LIBTOOL_LA.
Note that this class isn't enabled by default.
[ YOCTO #2380 ]
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit in gtk+ moved the cache files below <libdir>
"
commit c8849046860a9b17fa943247d85ddadb29262b48
Author: Matthias Clasen <mclasen@redhat.com>
Date: Thu Jul 4 09:27:17 2013 -0400
Move the module cache files below libdir
These files contain architecture-dependent paths, and thus placing them
into sysconfdir causes unnecessary hassle. Now the immodule cache file is
looked for in libdir/gtk-2.0/2.10.0/immodules.cache. Belated backport of a
change that was done in the run-up to 3.0.". Update gtk-immodules-cache.bbclass
to use that path.
The environment variable "GTK_IM_MODULE_FILE" can also be set to point GTK+
at the file to fix this problem. However, it causes problems for gtk3 apps.
[YOCTO #6774]
[YOCTO #8957]
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Mon, 1 Feb 2016 10:43:02 +0000 (10:43 +0000)]
directfb: use Yocto source mirrors for SRC_URI
directfb.org has been offline for several months now, and the "official"
DirectFB repositories on GitHub haven't been touched since October and don't
contain the 1.7.x branch or tags.
So that everyone (specifically people who don't have the Yocto Project source
mirrors configured) can download DirectFB, point the SRC_URI at the Yocto
Project source mirror directly.
Andre McCurdy [Mon, 1 Feb 2016 22:01:24 +0000 (14:01 -0800)]
gcc-configure-common.inc: drop --enable-target-optspace from configure
Configuring gcc with --enable-target-optspace (which causes gcc to
append "-g -Os" to the default CFLAGS_FOR_TARGET and so force libgcc
etc target libraries to always be optimised for size) dates back to
the very first commit in oe-core git in 2005 (for gcc 3.4.3).
Configuring gcc with --enable-target-optspace is not done widely
elsewhere (it's not used for Ubuntu or Fedora host gcc, the Linaro
binary toolchain or in Buildroot since early 2015). Sometime around
gcc 4.5.x it caused problems for powerpc and so was disabled for that
architecture:
This patch removes --enable-target-optspace completely (ie powerpc is
no longer a special case) and allows optimisation of libgcc etc to be
controlled directly by the flags present in TARGET_CFLAGS.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Mon, 1 Feb 2016 21:42:08 +0000 (13:42 -0800)]
machine/include: drop tune-cortexm*.inc and tune-cortexr4.inc
The Cortex M1, M3 and R4 CPU tuning files are poorly tested (if at
all). They have no obvious users either inside or outside oe-core.
Until OE officially gains support for CPUs without an MMU, these
tuning files are probably better maintained outside of oe-core (e.g.
in a separate meta-nommu layer).
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Mon, 1 Feb 2016 21:36:32 +0000 (13:36 -0800)]
liboil: drop recipe from oe-core
There are no remaining dependencies on liboil in oe-core (in most
cases it has been replaced by 'orc'). There is one recipe with a
dependency on liboil in meta-multimedia ('schroedinger').
The liboil recipe has now been included in meta-multimedia, so
can be dropped from oe-core.
Khem Raj [Mon, 1 Feb 2016 05:08:22 +0000 (05:08 +0000)]
libnss-mdns: Check for nss.h before using
nss.h is not available on all libcs
so check for it and if its not there provide
the needed data types.
Fixed buil with musl
../../nss-mdns-0.10/src/nss.c:32:17: fatal error: nss.h: No such file or
directory
compilation terminated.
make[2]: *** [libnss_mdns4_la-nss.lo] Error 1
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Khem Raj [Mon, 1 Feb 2016 05:08:27 +0000 (05:08 +0000)]
db: Use cross libtool
db is not reconfigured like usual autotools based components so it
generates its own libtool, and this libtool is not equipped to do cross
builds, e.g. when building using clang on musl, it misdirects linker to
use libstdc++.so from build host instead of target, the reason being it
does not understand sysroot.
Use cross libtool instead to build the target versions
Khem Raj [Mon, 1 Feb 2016 04:49:49 +0000 (04:49 +0000)]
libtool-cross: Unset pre|post dep objects
predep_objects and postdep_objects are specifying the duplicate objects
which are better computed by gcc/g++ driver, since we want to generate
PIE, PIC and non-PIC combinations, let gcc decide on this, since it
knows best about linker options to use in each of these situations.
When we defer the linker options to driver, we also need to remove
-nostdlib from linker commandline options.
Remove duplicate directory creation for ${D}${bindir_crossscripts}/
This fixes a frequent problem we see during -fpie links e.g.
|
/home/ubuntu/work/oe/openembedded-core/build/tmp-glibc/sysroots/qemux86-64/usr/include/c++/5.3.0/iostream:74:
undefined reference to `__dso_handle'
|
/home/ubuntu/work/oe/openembedded-core/build/tmp-glibc/sysroots/x86_64-linux/usr/libexec/x86_64-oe-linux/gcc/x86_64-oe-linux/5.3.0/ld:
.libs/cxx_channel.o: relocation R_X86_64_PC32 against undefined hidden
symbol `__dso_handle' can not be used when making a shared object
|
/home/ubuntu/work/oe/openembedded-core/build/tmp-glibc/sysroots/x86_64-linux/usr/libexec/x86_64-oe-linux/gcc/x86_64-oe-linux/5.3.0/ld:
final link failed: Bad value
# Commands used to build a loadable module if different from building
# a shared archive.
@@ -11908,8 +11908,8 @@
# Dependencies to place before and after the objects being linked to
# create a shared library.
-predep_objects="/home/ubuntu/work/oe/openembedded-core/build/tmp-glibc/sysroots/qemux86-64/usr/lib/../lib/Scrt1.o
/home/ubuntu/work/oe/openembedded-core/build/tmp-glibc/sysroots/qemux86-64/usr/lib/../lib/crti.o
/home/ubuntu/work/oe/openembedded-core/build/tmp-glibc/sysroots/qemux86-64/usr/lib/../lib/x86_64-oe-linux/5.3.0/crtbeginS.o"
-postdep_objects="/home/ubuntu/work/oe/openembedded-core/build/tmp-glibc/sysroots/qemux86-64/usr/lib/../lib/x86_64-oe-linux/5.3.0/crtendS.o
/home/ubuntu/work/oe/openembedded-core/build/tmp-glibc/sysroots/qemux86-64/usr/lib/../lib/crtn.o"
+predep_objects=""
+postdep_objects=""
predeps=""
postdeps="-lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc"
Richard Purdie [Sun, 31 Jan 2016 13:35:54 +0000 (13:35 +0000)]
sstate: Revert using -m option to tar in sstate
In http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=2d89cff42af2bb0049224bfaaebaa2b21966169f
we added a workaround for dealing with lack of time sync between build
machines and their users.
This has turned out to cause problems for people who rely on timestamps
being preserved in sstate output.
Since our autobuilders are all in time sync with ntp, revert the commit.
[YOCTO #8996]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 31 Jan 2016 13:32:36 +0000 (13:32 +0000)]
libarchive-native: Disable libxml2 support
For libarchive-native, we don't really need libxml2 support. Adding this
means we need libxml2-native which means we need python-native and
makes the dependency chains pretty heavy. The target case is unaffected.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 31 Jan 2016 13:21:06 +0000 (13:21 +0000)]
binutils: Use target provided zlib
When using -fpie (security related cflags), qemux6-64 builds would
fail due to linker symbol errors. This was due to the internal zlib
that binutils was using.
Add the switch to tell it to use the target system zlib which is
already in DEPENDS. That zlib is already compiled with the correct
flags.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Phil Blundell [Sat, 30 Jan 2016 12:21:59 +0000 (12:21 +0000)]
native.bbclass: Set CXXFLAGS from BUILD_CXXFLAGS not BUILD_CFLAGS
Although BUILD_CXXFLAGS, by default, expands to the same thing as
BUILD_CFLAGS there is no guarantee that this will be true in all
cases. When setting CXXFLAGS we should use the former.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yuqing Zhu [Thu, 28 Jan 2016 09:02:48 +0000 (17:02 +0800)]
gstreamer1.0-plugins-base: Add video crop supporting when convert frame
Getting thumbnail will use convertframe to convert video frame to
desired video format and size. But haven't process crop meta on
the video buffer. Need to add video crop support.
Signed-off-by: Yuqing Zhu <b54851@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stefan Agner [Wed, 27 Jan 2016 23:14:26 +0000 (15:14 -0800)]
lib/oe/package_manager: remove package feed lists
Remove opkg package feed lists after generating the rootfs. The
lists have been generated by the local feed but are no longer
necessary after image generation. This still leaves the package
management fully usable (and hence is different from omitting
package-management from IMAGE_FEATURES).
Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Markus Lehtonen [Fri, 29 Jan 2016 15:04:31 +0000 (17:04 +0200)]
externalsrc: use shared CONFIGURESTAMPFILE if B=S
External source tree is used as the builddir even for different
architectures in case ${B}=${S}. This may cause problems if MACHINE is
changed as do_configure is not being re-run (which would run make
clean). This patches changes externalsrc to use a common (per-recipe)
CONFIGURESTAMPFILE under 'work-shared' if ${B}=${S}. In addition,
do_configure will depend on changes of this stamp file. As a result,
do_configure is re-run and the build dir is cleaned correctly if a
rebuild for different MACHINE is done.
[YOCTO #8950]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
G4 does not have SPE, so we make that explicit in the tune files and
since we emulate G4 when building Qemu, we ensure it for qemuppc as
well.
GCC config for powerpc-linux is made to include SPE by default which is
equivalent if the tripet was powerpc-linux*spe, this forces gcc to
configure assembler to enable -mspe by default, when we do that then the
kernel fails to compile with binutils 2.26, since newer assembler is
smart to detect the tlbia instructions are not compatible with SPE and
hence the kernel build breaks rightly. We configure the kernel for G4 as
well where it enables tlbia instrucitons rightly so because it thinks
its being configured for power4. So we keep the options but do not force
-mspe down to assembler as default.
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Fri, 29 Jan 2016 22:08:49 +0000 (14:08 -0800)]
pango.inc: misc dependency fixes
- Add glib-2.0-native dependency for target
- Add fontconfig-native and freetype-native dependencies for native
- Drop unnecessary dependency on zlib for all
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 27 Jan 2016 12:23:34 +0000 (12:23 +0000)]
base: Move COMPATIBLE_MACHINE out the scope of SOURCE_MIRROR_FETCH
Recipes setting COMPATIBLE_MACHINE are likely to have SRC_URI
entries which can heavily depend on the configured machine. Skipping
them for SOURCE_MIRROR_FETCH is therefore not advised and leads to
build errors whilst not particularly improving source mirrors.
[YOCTO #8802]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
