Scott Garman [Wed, 16 Feb 2011 00:36:12 +0000 (16:36 -0800)]
opensp: improve configuration and install steps
* For the -native case we need to point two configure
options to the SGML catalogs in the native sysroot
* Some packages (e.g, iputils) use different names for
the openSP utilities, so create these names as
symlinks after do_install
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Lianhao Lu [Tue, 15 Feb 2011 11:13:19 +0000 (19:13 +0800)]
linux-libc-headers-yocto: Added RPROVIDES.
[BUGID #714] Added RPROVIDES_${PN}-dev and RPROVIDES_${PN}-dbg for
linux-libc-headers-yocto to provides "linux-libc-headers-dev" and
"linux-libc-headers-dbg" respectively.
This resolved the dependency issue of libc6-dev depending upon
linux-libc-headers-dev. Package linux-libc-headers-yocto-dev will be
installed as linux-libc-headers-dev.
Mark Hatle [Wed, 16 Feb 2011 04:56:13 +0000 (22:56 -0600)]
package_rpm: Fix solverdb generation
The RPM solverdb was potentially being generated multiple times.
Fix this by ensuring we only process each directory once.
Also correct an issue where the solution did not necessarily follow
the preferred architecture ordering, reverse the default Poky ordering
so that preferred is listed first.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Mark Hatle [Wed, 16 Feb 2011 04:43:42 +0000 (22:43 -0600)]
rpm: Avoid fsync when writing files
By default RPM strives for the safest possible file creation and
enforces fsync on each file. This changes that default by backporting
the fsync disabled from the latest CVS snapshot.
This will cut a few minutes off the rootfs generation using RPM.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Mark Hatle [Wed, 16 Feb 2011 04:20:49 +0000 (22:20 -0600)]
rpm: Add the ability to use the platform file during install
Add a new rpm macro, rpmrc_platform_path to specify an alternative platform
file. This is required to allow the dep resolver to identify compatible
packages.
Also workaround a minor problem with the --showrc command in RPM. A bug
has been reported upstream on this.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Bruce Ashfield [Tue, 15 Feb 2011 18:56:08 +0000 (13:56 -0500)]
linux-yocto: add jasperforest BSP and fix lttng NMI bug
During the introduction of the jasperforest BSP, a lttng
issues was picked up with NMI tracing. The upstream (and
our solution) is to revert that commit.
This change updates the meta repo for jasperforest and pushes
out the nmi revert to all BSPs.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Darren Hart [Mon, 14 Feb 2011 22:52:47 +0000 (14:52 -0800)]
README.hardware: update the beagleboard serial port documentation
Update the README.hardware beagleboard description to account for the use
of the OMAP_SERIAL in recent kernel recipes. Add a note documenting how to
use the old 8250 based serial devices for older kernels.
Correct a type.
Correct the boot script name from user.scr to boot.scr.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Gary Thomas <gary@mlbassoc.com>
Bruce Ashfield [Mon, 14 Feb 2011 19:07:38 +0000 (14:07 -0500)]
linux-libc-headers-yocto: disable device tree generation
Fixes [BUGID #719]
The common routines for handling a git based yocto kernel
are included from the lib headers recipe to checkout the
appropriate branch of the kernel for header generation.
linux-yocto.inc includes device tree installation rules
which typically apply to a kernel user of the include file,
but do not apply to a simple header generation. The fix is
to override the DTB variables in this recipe, which disable
the device tree installation rules.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Scott Rifenbark [Tue, 8 Feb 2011 19:48:13 +0000 (13:48 -0600)]
documentation/kernel-manual/kernel-how-to.xml: - Condense and merge example changed.
The example used to show how to condense and merge two BSPs into a second
SCM used a non-existant machine (cav_ebt5800-standard). I replaced this
machine with 'common_pc_64-standard, which is a real machine.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
[BUGID# 597] - After talking with Bruce Ashfield the kernel documentation
needs to support the 2.6.34 disribution. So, the 'common-pc-standard'
strings need to be changed back to 'common_pc-standard'. This fix restores
them.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Tue, 8 Feb 2011 18:23:54 +0000 (12:23 -0600)]
documentation/yocto-project-qs/yocto-project-qs.xml: [BUGID# 631] - Added tip for saving disk space during a build.
[BUGID# 631] - I added a tip in the section where we show a sample build.
The tip says that you can add 'INHERIT += "rm_work"' to the local.conf file
to help conserve disk space during a build.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Mark Hatle [Thu, 10 Feb 2011 00:13:50 +0000 (18:13 -0600)]
recipes: pre/post actions
A number of the recipes did not properly label their pre and post
actions, causing the actions to occur in all split packages. This
was corrected by defaulting to _${PN} in most cases.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Mark Hatle [Fri, 11 Feb 2011 20:18:16 +0000 (14:18 -0600)]
busybox: Rework busybox to fix limitations in initscripts
A recent busybox change added a "second" initscript to the main busybox
package. This however is not supported by the update-rc.d.bbclass.
Instead we split the package so that each initscript gets it's own split.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Mark Hatle [Fri, 11 Feb 2011 17:43:54 +0000 (11:43 -0600)]
fetch2: unpack revision
Revise the unpack function to have a way to disable the unpack. This is
based on the work from "Andreas Oberritter <obi@opendreambox.org>", see
http://cgit.openembedded.net/cgit.cgi/openembedded/commit/?id=2bdfe8519eda8067845019a699acdf19a21ba380
In addition, the to_boolean function comes from the work of
"Chris Larson <chris_larson@mentor.com>", see
http://cgit.openembedded.net/cgit.cgi/openembedded/commit/?id=900cc29b603691eb3a077cb660545ead3715ed54
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Scott Garman [Thu, 10 Feb 2011 00:00:08 +0000 (16:00 -0800)]
openjade: fix build issues
* Recipe is now -native only
* Fix install failure due to missing install path
* Removed recipe cruft that was not needed, simplifying it
* Removed unnecessary patches
* Improved patch comment for makefile.patch
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Zhai Edwin [Fri, 11 Feb 2011 13:55:07 +0000 (21:55 +0800)]
sstate: Fix bugs after new fetcher
Current sstate's fetch code doesn't reflect latest fetcher changes, so old
fetch style cause exception and fail silently.
[BUGID #708] got fixed.
Another issue is "import xxx" in python function from sstate.bbclass can only
sit in the head of the function, else have UnboundLocalError: "local variable
XXX referenced before assignment".
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Chris Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Chris Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chris Larson [Mon, 7 Feb 2011 17:50:27 +0000 (10:50 -0700)]
Add initial bitbake-layers script
This script has subcommands which operate against your bitbake layers, either
displaying useful information, or acting against them. Currently, it only
provides a show_appends command, which shows you what bbappends are in effect,
and warns you if you have appends which are not being utilized.
Currently, a bug exists when using this due to the DataContext stuff, but I'm
not certain as to the root cause, it appears to be the bb package relying
implicitly on the way the bitbake script does things. A fix for that issue
will be forthcoming, as will further subcommands.
Mark Hatle [Wed, 9 Feb 2011 04:16:41 +0000 (22:16 -0600)]
Misc hard link fixes
I searched the various classes and looked for copies that should attempt to
preserve hardlinks. This fixes the majority of this copies by switching to
using tar as the copy method. It also has the side effect of preserving sparse
files.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Mark Hatle [Wed, 9 Feb 2011 03:49:36 +0000 (21:49 -0600)]
package.bbclass: Preserve hard links!
Hard links were not being preserved in the move from the install image
-> package copy. Again they were being discarded in the package ->
packages-split copy as well.
By preserving the hard links we have the potential to save a ton of rootfs
space.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Yu Ke [Wed, 9 Feb 2011 11:15:52 +0000 (19:15 +0800)]
mesa-7.10: set mesa 7.10 as default instead of 7.8.2
originally mesa 7.8.2 is set as default because 7.10
has depency of GPLv3 talloc. since mesa 7.10 has resolved
the GPLv3 talloc dependency issue, it is safe to set 7.10
as default
