Randy Witt [Fri, 6 Mar 2015 02:11:46 +0000 (18:11 -0800)]
systemd: Fix the problem of an empty journal on boot
systemd by default tries to write the journal to /var/log/journal.
But base-files has a symlink /var/log -> /var/volatile/log. And
/var/volatile is a tmpfs mount in /etc/fstab.
If the journal service started before /var/volatile was mounted (which
was the typical scenario) then the journal would appear empty since
the old location was mounted over.
This change fixes the problem by ensuring that the journal doesn't start
until after the mount happens.
[Yocto #7388]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
The AC_EGREP_CPP macro is looking for a 'yes' string that is likely
to be found in the path where the file is stored. This false positive
match causes variables to be mistakenly set.
The fix is to use a more elaborated string instead.
This has to be done at the configure and the configure.ac files, because
a reconfigure does not happen in the regular build flow.
[YOCTO #6614]
Signed-off-by: Benjamin Esquivel <benjamin.esquivel@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Gary Thomas [Thu, 5 Mar 2015 15:48:51 +0000 (08:48 -0700)]
opkg: Fix error when recompiled
If this package were ever recompiled, i.e. do_compile is rerun
as a result of a compiler change, etc., the 'opkg.conf' file
would be incorrectly updated, leading to an error:
* opkg_conf_set_option: Duplicate option lists_dir, using first seen value "/var/lib/opkg".
Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Dan McGregor [Wed, 4 Mar 2015 16:22:00 +0000 (10:22 -0600)]
systemd: fix systemd-tmpfiles ACL issues
On systems where /var/log is not a volatile systemd-tmpfiles creates
duplicate ACL entries. This causes systemd-tmpfiles service to fail.
Also quietly ignore ACL settings on filesystems that don't support ACLs.
Backport the fixes from systemd master to fix these issues.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca> Signed-off-by: Ross Burton <ross.burton@intel.com>
Saul Wold [Wed, 4 Mar 2015 17:46:48 +0000 (09:46 -0800)]
openssl: Upgrade to 1.0.2
Rebased numerous patches
removed aarch64 initial work since it's part of upstream now
Imported a few additional patches from Debian to support the version-script
and blacklist additional bad certificates.
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Robert Yang [Wed, 4 Mar 2015 09:29:53 +0000 (01:29 -0800)]
create-pull-request: fix git GIT_VERSION
If the git version is 1.7.9.5, then 1795 is bigger than 210 which causes
errors like:
fatal: No such ref: :rbt/bash
fatal: Needed a single revision
ERROR: git request-pull reported an error
Use the first 3 numbers to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Randy Witt [Mon, 2 Mar 2015 18:55:38 +0000 (10:55 -0800)]
lib/oeqa/selftest/lic-checksum: Verify failure when checksum changes.
The test added verifies that when a file with an absolute path in
LIC_FILES_CHKSUM changes without a corresponding change to the md5sum,
it triggers the license qa test again with a failure.
[Yocto #6450]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Randy Witt [Mon, 2 Mar 2015 18:55:37 +0000 (10:55 -0800)]
base.bbclass: Add LIC_FILES_CHKSUM files to checksum files.
Previously, files with absolute paths in LIC_FILES_CHKSUM such as
"file://${COMMON_LICENSE_DIR}/foo" would not result in a qa failure
when the license file changed.
To fix this problem, add any files with absolute paths from
LIC_FILES_CHKSUM to the file-checksums varflag, so that changes in the
license file are detected and cause the qa task for licenses to run.
[Yocto #6450]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Li Zhou [Mon, 2 Mar 2015 10:30:22 +0000 (18:30 +0800)]
libtool: put libltdl.la in the right package.
The libltdl libraries are put in libltdl-* packages, but libltdl.la
is packaged in libtool-dev. This change puts libltdl.la in libltdl-dev
package instead of libtool-dev.
Signed-off-by: Li Zhou <li.zhou@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Bian Naimeng [Mon, 2 Mar 2015 11:34:48 +0000 (19:34 +0800)]
gcc-source: fix bug to avoid building error.
gcc-source don't do do_package_write_rpm, so we should set
PACKAGES = "" to avoid the building error if we want generate srpm,
otherwise, we get the error as below.
ERROR: Task do_deploy_archives in meta/recipes-devtools/gcc/gcc-source_4.9.bb \
depends upon non-existent task do_package_write_rpm in \
meta/recipes-devtools/gcc/gcc-source_4.9.bb
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
oe.utils.both_contain() just does a find() on the value
rather than splitting the value and then looking in the
list of split items. The result is that if you add a
feature to MACHINE_FEATURES that itself has a substring
that matches one of the values looked for when building
COMBINED_FEATURES, you end up with an incomprehensible
error (here with "ext2i" in MACHINE_FEATURES):
ERROR: Nothing RPROVIDES 'packagegroup-base-ext2'
(but /home/balister/src/oe-core/oe-core/meta/recipes-core/
/packagegroups/packagegroup-base.bb RDEPENDS on or otherwise requires it)
Fix [YOCTO #6888].
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Michael Wood [Fri, 27 Feb 2015 11:47:54 +0000 (11:47 +0000)]
scripts/send-error-report: Rework script to support new features
- Add arguments to allow for non-prompted sending, json encoded response
and link backs.
- Add feature to check the server's max_log_size
- Add feature to allow reviewing of the final data
- Be a bit more helpful if the expected fields aren't filled in instead
of exiting.
- Remove the redundant urlencode
- Add a user-agent so that the server can identify the encoding method.
- Remove custom proxy handling - urllib should 'just work'
[YOCTO #6736]
[YOCTO #7245]
[YOCTO #7105]
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Martin Jansa [Mon, 9 Feb 2015 12:25:15 +0000 (13:25 +0100)]
recipes: add x11 to required DISTRO_FEATURES
* it's not complete, but recipes depending on virtual/libx11 are easiest
to spot, I've long list of PNBLACKLIST for all recipes which cannot
be built in distro without x11 in DISTRO_FEATURES
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 3 Mar 2015 11:54:25 +0000 (11:54 +0000)]
systemd: fix tmpfiles error on images without PAM
If PAM isn't enabled then systemd-tmpfiles on boot will fail to start with the
following error message:
Failed to copy files to /etc/pam.d: No such file or directory
This is because systemd-tmpfiles is attempting to build a usable /etc from the
skeleton in /usr/share/factory but pam.d isn't present because PAM is disabled.
Fix this by not attempting to copy pam.d in non-PAM configurations.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 2 Mar 2015 11:41:47 +0000 (11:41 +0000)]
gst-player: port to GTK+ 2
Whilst Sato still uses GTK+ 2 we don't want the overhead of building both GTK+ 2
and GKT+ 3. Luckily gtk-play is a simple application and it's just a small
patch away from building with GTK+ 2.
When Sato is ported to GTK+ 3 (the mythical Shuku proposal) this patch can be
removed.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Mon, 2 Mar 2015 21:36:41 +0000 (16:36 -0500)]
kern-tools: improve patch application performance
Update the SRCREV for the following incremental improvement in patch
processing time:
kgit-meta: skip patches on non-leaf nodes
In a similar way as commit 0768d697 [kgit-meta: dont run kgit-s2q
for
non-leaf nodes], we can save even more processing time by not even
analysing and linking patches if we aren't on the leaf node of the
tree.
This early exit can save nearly 95% of the time required to "patch"
a tree when no changes are actually applied.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Mon, 2 Mar 2015 21:36:39 +0000 (16:36 -0500)]
kernel-yocto: inhibit BSP description warnings for custom linux-yocto kernels
We don't require that a yocto custom kernel + defconfig have a full BSP
description (but of course it would be better if they did). Since this
isn't a requirement, we shouldn't alarm users by generating a BSP
description warning.
To implement this, we add a bsp audit level flag (like the one that
exists for kconfig audits), and only set it to activate in the versioned
linux-yocto recipes.
[YOCTO: #7370]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 2 Mar 2015 18:05:36 +0000 (18:05 +0000)]
taglib: Fix cmake floating dependency on boost
The previous fix for this issue was incomplete. We also need to change
the source file to avoid this error. Grepping the build directory for boost
will show the issue when building taglib after boost has been built.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 2 Mar 2015 12:56:06 +0000 (12:56 +0000)]
security_flags: remove PIE flags from flex and gstreamer1.0-plugins-bad
These recipes both fail to build with "relocation R_X86_64_PC32 against
undefined hidden symbol `__init_array_start' can not be used when making a
shared object" when using PIE.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Fri, 27 Feb 2015 14:57:48 +0000 (14:57 +0000)]
systemd: add PACKAGECONFIG for xkbcommon and iptables
systemd has optional support for xkbcommon (verify keymaps when locale changes)
and iptables (configure NAT rules).
Add PACKAGECONFIG options for these, disabling iptables by default and
respecting the X11 DISTRO_FEATURE for libxkbcommon (as the code involves X11
keymaps).
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patrick Ohly [Wed, 25 Feb 2015 14:53:29 +0000 (06:53 -0800)]
package_rpm.bbclass: support packaging of symlinks to directories
os.walk() returns symlinks to directories in the "dirs" lists, but then never
enters them by default. As a result, the old code applied neither the
directory handling (because that is active once a directory gets entered) nor
the file handling, and thus never packaged such symlinks.
The fix is simple: find such special directory entries and move them to the
"files" list. However, one has to be careful about the undefined behavior of
modifying a list while iterating over it.
This fix was required for packaging a modified base-files that created
symlinks into /usr for /sbin /lib and /sbin.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joe MacDonald [Wed, 25 Feb 2015 04:39:01 +0000 (23:39 -0500)]
libpcap: add pkg-config support
libpcap was not previously installing a pkg-config file. Add a basic one
that will allow using 'pkg-config --libs libpcap', for example, in recipes
rather than 'pcap-config', which frequently returns incorrect information.
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Thu, 26 Feb 2015 17:59:01 +0000 (17:59 +0000)]
sato: use gtk-play (from gst-player) instead of Gaku
The Gaku media player was always a bit incomplete and had some serious bugs.
gst-player doesn't have these bugs, is maintained, and uses GStreamer 1.x.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Thu, 26 Feb 2015 17:59:00 +0000 (17:59 +0000)]
gst-player: add
gst-player is a convenience library for handling media playback in GStreamer.
It also has a sample application that can be used as a basic media player for
testing.
Patch in a file selector for use without a terminal and a desktop file so it
appears in the desktop.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Wed, 25 Feb 2015 11:22:25 +0000 (11:22 +0000)]
lib/oe/terminal: fix konsole terminal support for KDE 4.x
It seems that the --nofork option genuinely stops konsole from going
into the background now; I'm not sure when this changed but it does seem
to be working so we can use it. (Tested with Konsole 2.10 and 2.14.2).
Fixes [YOCTO #4934].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* If we want to support versions with more than two parts, versions with
only one part, or versions with non-integer parts, then we have to
stay with strings. We can use distutils.version.LooseVersion() to help
with comparisons.
* We don't want a warning when launching gnome-terminal 3.10+ and
logger.warn() doesn't take a first integer parameter anyway
(logger.debug() does).
* Also clean up tabs.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sven Ebenfeld [Mon, 23 Feb 2015 19:39:41 +0000 (20:39 +0100)]
terminal.py: No --disable-factory for gnome-terminal >= 3.10
--disable-factory has been disabled in earlier versions of gnome-terminal
but from version 3.10 it raises an error and quits. This makes devshell
unusable with gnome-terminal >= 3.10. This patch checks for the version and
removes --disable-factory if you have the terminal version 3.10 or higher.
Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Tue, 24 Feb 2015 18:07:26 +0000 (18:07 +0000)]
systemd: Upgrade 216 -> 218
Remove upstreamed patches as well as patches which arent needed anymore
since features are dropped from systemd e.g. userspace firmware download
Tested on qemux86
Change-Id: Ic53aaad198998de146c3a7702ef17de871de9de6 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 24 Feb 2015 18:07:25 +0000 (18:07 +0000)]
util-linux: disable systemd
systemd has a build-dependency on util-linux for libmount, and util-linux has an
optional build dependency on systemd.
The features in util-linux that enabling systemd gives you are:
* lslogins can show recent journal entries from the user
* uuidd can use socket activation and has a service file
* fstrim has a service file
* logger can write journal entries
These are not worth the overhead of maintaining two util-linux recipes to
bootstrap the cycle, so disable systemd support in util-linux.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gst-plugins-package.inc: Avoid dependency on ${PN} from ${PN}-<plugin>
A recent change to this file added a runtime dependency from ${PN} on
${PN}-meta since users tend to believe that installing the main
package will bring in all of the individual plugin packages, which
previously was not the case. However, since all plugin packages had a
dependency on the main package, this caused all plugin packages to be
pulled in whenever one plugin package was installed...
Since the main package is now guaranteed to be empty, there is no
reason for the plugin packages to depend on it any more.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
busybox:udhcpc: Start with a metric of 10 for routes
Linux allows to install multiple default routes with
different metrics. Start with a metric above 0 to
allow other parts of the system to install routes
with a lower metric.
Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Randy Witt [Mon, 23 Feb 2015 17:00:43 +0000 (17:00 +0000)]
populate_sdk_ext: add extensible SDK
This bbclass will create an SDK with a copy of bitbake and the metadata
and sstate for the target specified for the task. The idea is to let
"system" developers both work on applications and then test adding them
to an image without having to switch between workspaces or having to
download separate items.
Rather than running bitbake directly however, the primary way of running
builds within the extensible SDK is to use the "devtool" command. The
rest of the build system is fixed via locked shared state signatures,
and thus only the recipes you have added get built.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Randy Witt [Mon, 23 Feb 2015 17:00:42 +0000 (17:00 +0000)]
scripts/oe-buildenv-internal: add means of skipping SDK check during setup
The oe-buildenv-internal script checks if the user is already in an sdk
environment and errors if true. Add a way to skip this check.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Randy Witt [Mon, 23 Feb 2015 17:00:40 +0000 (17:00 +0000)]
toolchain-shar-template.sh: Make relocation optional.
If the buildsystem is copied into the sdk and its toolchain is to
be used, then the relocation provided in toolchain-shar-template.sh
isn't needed and will actually fail.
So break the relocation aspect out and essentially make it another
SDK_POST_INSTALL_COMMAND script.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Randy Witt [Mon, 23 Feb 2015 17:00:39 +0000 (17:00 +0000)]
toolchain-scripts: Add parameters to toolchain_create_sdk_env_script.
To add some flexibility to setting up the paths for the toolchain,
add some parameters. This initial use will be in order to point at
the buildsystem toolchain copied in by copy_buildsystem.py.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Randy Witt [Mon, 23 Feb 2015 17:00:38 +0000 (17:00 +0000)]
copy_buildsystem.py: Add methods to copy shared state.
Added the helper functions necessary to copy the sstate from the
current build, and generate the file to "lock" it.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Randy Witt [Mon, 23 Feb 2015 17:00:37 +0000 (17:00 +0000)]
copy_buildsystem.py: Add a way to copy buildsystem to a directory.
This file provides a way to take bitbake and the layers in the
current build and copy them to a target specified.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since this previously always tried to use hardlinks you couldn't have
the source and destination be on different devices. This change allows
for that and also prevents failure in situations where the files already
existed.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 5 Feb 2015 12:05:40 +0000 (12:05 +0000)]
classes/sanity: avoid bblayers version issue when switching between poky and other DISTRO values
If you create a build directory with poky, or set DISTRO to "poky" and
run bitbake, you'll get a bblayers.conf file with LCONF_VERSION set to
6. If you then set DISTRO to any other value where the new distro config
doesn't pull in poky's config, e.g. "nodistro", you would then get a
bblayers.conf version error which didn't immediately make sense. (The
layer versions have been out-of-step ever since meta-yocto-bsp was
split out of meta-yocto several years ago).
This is just painful and we'd rather users didn't have to deal with
it. Obviously it isn't an OE-Core problem per se, but a simple way to
resolve it for everyone is to bump OE-Core's version to 6 with an
automatic no-op upgrade. Also ensure that multiple upgrade functions
(such as the poky one) have a chance to execute by not breaking out of
the loop as we were before.
Fixes [YOCTO #6139].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python-native: Reverts usage of distutils.sysconfig
On older versions of Python, sysconfig read the Makefile and Python.h, generated at build time
now it uses _sysconfigdata which contains information about the HOST, erroneous in our case,
this causes an error when bulding something using distutils since it obtains compiler information and such.
- Based on Paul Eggletons work to partially upgrade to Python 2.7.6
Modified:
default-versions.inc: switched to python 2.7.9
generate-manifest-2.7.py: fixed _sysconfigdata
python-2.7-manifest.inc: fixed _sysconfigdata
python.inc: Updated checksums and source, no LICENSE
change just updated some dates
python-native_2.7.3 -> python-native_2.7.9 and updated patches
python_2.7.3 -> python_2.7.9, and added ac_cv_file__dev_ptmx=no
ac_cv_file__dev_ptc=no in EXTRA_OECONF to solve python
issue #3754, only needed when cross compiling, also updated patches
use_sysroot_ncurses_instead_of_host.patch: New patch to use ncursesw
from sysroot instead of hosts, introduced by fix for python issue #15268
Paul Eggleton [Thu, 19 Feb 2015 16:40:04 +0000 (16:40 +0000)]
devtool: fix broken clones of git recipes
Because we move the workdir when extracting source, then move the source
and delete the temporary workdir, you lose the indirection symlink
pointed to by the alternates file (which is created when the fetcher
clones it from DL_DIR with -s) and the resulting repository is broken.
In any case, for a source repo that the user may put their own changes
into, we can't really rely on a clone made with -s in case the
original goes away - because of cleanall, DL_DIR disappearing, etc. So
repack the repository so that it is a complete, non-shared clone after
unpacking.
(While I'm at it, add a test for devtool modify with a git recipe which
verifies that this works.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 19 Feb 2015 16:40:00 +0000 (16:40 +0000)]
devtool: update-recipe: add handling for git recipes
When updating git-based recipes, in a lot of cases what you want is to
push the changes to the repository and update SRCREV rather than to
apply patches within the recipe. Updating SRCREV is now the default
behaviour for recipes that fetch from git, but this can be overridden
in both directions using a new -m/--mode option.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 19 Feb 2015 16:39:58 +0000 (16:39 +0000)]
devtool: build: run do_populate_sysroot instead of do_install
If you want to be able to make use of libraries in conjunction with
devtool then we need to install them into the sysroot for other recipes
to use. Make it a configuration option in case it needs to be changed at
runtime.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 19 Feb 2015 16:39:57 +0000 (16:39 +0000)]
devtool: reset: run bitbake -c clean on recipe
If you've added a new recipe, you want the output cleaned when you do
devtool reset, otherwise cruft from building the recipe may remain which
could interfere with future builds.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
