Henning Heinold [Fri, 18 Nov 2011 11:59:48 +0000 (12:59 +0100)]
glib-2.0: fix qsort_t testing for uclibc
* instead of disabling the configure test and set it always true
use the site files to set it true for glibc/eglibc and false
for uclibc
* remove the patch
' tested only for uclibc
* bump PR
Signed-off-by: Henning Heinold <heinold@inf.fu-berlin.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jiajun Xu [Thu, 17 Nov 2011 06:05:50 +0000 (14:05 +0800)]
sanitytest: remove rpm/zypper tests if PACKAGE_CLASSES does not set package_rpm
If PACKAGE_CLASSES does not set package_rpm as the first item, the root filesystem
will not be generated based on rpm. We need remove rpm/zypper tests against
non-rpm filesystem.
[YOCTO #1757]
Signed-off-by: Jiajun Xu <jiajun.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jiajun Xu [Thu, 17 Nov 2011 06:05:49 +0000 (14:05 +0800)]
sanitytest: use different option for command ps from busybox and procps
Current sanitytest use option -e for ps command, which only works for ps
from procps. It fails if ps is provided by busybox. Add check to use different
option for command from busybox and procps.
[YOCTO #1756]
Signed-off-by: Jiajun Xu <jiajun.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 16 Nov 2011 16:59:29 +0000 (16:59 +0000)]
package_rpm: Set _tmppath to avoid races over tmp files
Occasionally we keep seeing "unable to open temp file" messages during
do_package_write_rpm tasks. This appears to happen when multiple
processes are writing rpm files and is likely due to using the
shared system temp directory. This patch changes the tmp path
to the package work directory meaning conflicts should become
a non-issue.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 17 Nov 2011 12:28:13 +0000 (12:28 +0000)]
package.bbclass: Ensure we tell rpmdeps where to find its magic file
Without this, if rpmddeps came from a sstate package which was relocated
it might not find its magic file and if that happens, requires/provides
in packages could get corrupted. This leads to failures at rootfs time
during builds with messages like:
libdbus-1.so.3 is needed by libdbus-glib-1-2-0.92-r1.armv5te
since the provides would be missing in the dbus package.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-Core uses very old version of gobject-introspection. The recipe says
0.10.8, but in reality it's GOBJECT_INTROSPECTION_0_6_3-41-gefa7266.
That version e.g. doesn't compile with python 2.7 (default in some
versions), etc.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To remove a name conflict with e17's screenshot tool (and possibly other
screenshot tools, as screenshot is a generic term), rename screenshot
to sato-screenshot.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Michael Brown [Tue, 15 Nov 2011 20:58:45 +0000 (12:58 -0800)]
gcc-4.6: fix toolchain build for SH4
Signed-off-by: Michael Brown <Michael_E_Brown@dell.com>
Port patch from base openembedded. Since 4.6 already has fixes for config.gcc,
the fix only requires a one line change to gcc-cross4.inc.
Saul Wold [Tue, 15 Nov 2011 20:58:44 +0000 (12:58 -0800)]
boost: Update to 1.47.0 & Cleanup
Removed boost-jam-native since it was an older version
no incompatible with boost 1.47.
Modified boost to use BBCLASSEXTEND native for the bjam
native binary.
Removed older unused patches.
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use a yoctoproject.org based tarball since gnu-config is required very
early on in the native build process, we do not want to rely on git, which
can cause a circular dependency issue.
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Xiaofeng Yan [Tue, 15 Nov 2011 20:58:37 +0000 (12:58 -0800)]
directfb: update to 1.4.15
The newest version for directfb is 1.5.3 but it's instruction set base on armv6.
The current qemuarm don't have some instructions for armv6 because some codes of \
the new version of directfb more than 1.5 are realized with assemble language,for example the lock. \
I update this recipe to 1.4.15 for directfb running more platform.
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Xiaofeng Yan [Tue, 15 Nov 2011 20:58:36 +0000 (12:58 -0800)]
libx11-diet: update to 1.4.4
I remove patch "nodolt.patch" because it is no use in the new version \
and change patch "include_fix.patch" to "keysymdef_include.patch" from libx11-1.4.4.
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 15 Nov 2011 20:46:10 +0000 (20:46 +0000)]
libconvert-asn1-perl/libtimedate-perl: Convert to use allarch
Both these recipes generate architecture independent packages.
They can safely use the allarch class to ensure they really
are indepentent from the target compiler and so forth and
hence ensure sstate packages with good dependencies.
[YOCTO #1075]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Fri, 11 Nov 2011 16:28:43 +0000 (17:28 +0100)]
base.bbclass: add subversion-native to DEPENDS if there is svn:// in SRC_URI
* in some cases this could cause circual dependency (ie if we decide to
apr_svn.bb or something like that before subversion-native in dependency
tree), Saul said he had such case, but I wasn't able to reproduce it
here (here it builds subversion-native-1.7.0 fine).
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Phil Blundell [Mon, 14 Nov 2011 13:06:51 +0000 (13:06 +0000)]
libnss-mdns: avoid race condition in postinst
Writing to "/tmp/nsswitch.conf" leads to a race condition if two
copies of the postinst are running simultaneously. Fix this by
modifying /etc/nsswitch.conf in place using sed -i. Also make the
same change to the prerm for consistency although the race will not
occur here in practice.
Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Connor Abbott [Tue, 15 Nov 2011 04:16:37 +0000 (23:16 -0500)]
mime.bbclass: fix typo
Before this patch, nautilus would fail with:
ERROR: Error executing a python function in /home/connor/angstrom/sources/meta-openembedded/meta-gnome/recipes-gnome/nautilus/nautilus_2.32.2.bb:
NameError: global name 'dgetVar' is not defined Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Mon, 17 Oct 2011 22:06:10 +0000 (00:06 +0200)]
aspell: force ARM mode
* this is just work around for ICE, better fix would be to fix gcc
| ./common/fstream.hpp:23:9: note: the mangling of 'va_list' has changed in GCC 4.4
| modules/speller/default/typo_editdist.cpp: In function 'short int aspeller::typo_edit_distance(acommon::ParmString, acommon::ParmString, const aspeller::TypoEditDistanceInfo&)':
| modules/speller/default/typo_editdist.cpp:77:3: internal compiler error: in gen_thumb_movhi_clobber, at config/arm/arm.md:5937
| Please submit a full bug report,
| with preprocessed source if appropriate.
| See <http://gcc.gnu.org/bugs.html> for instructions.
| make[1]: *** [modules/speller/default/typo_editdist.lo] Error 1
| make[1]: *** Waiting for unfinished jobs....
| make[1]: Leaving directory `/OE/shr-core/tmp-eglibc/work/armv4t-oe-linux-gnueabi/aspell-0.60.6.1-r0/aspell-0.60.6.1'
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
modules/bluetooth/sbc.c -fPIC -DPIC -o .libs/libbluetooth_sbc_la-sbc.oi
| modules/bluetooth/sbc.c: In function 'sbc_synthesize_four':
| modules/bluetooth/sbc.c:553:18: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c: In function 'sbc_synthesize_eight':
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| {standard input}: Assembler messages:
| {standard input}:6997: Error: selected processor does not support Thumb mode `mla r3,r0,ip,r3'
| {standard input}:7012: Error: selected processor does not support Thumb mode `mla r3,r1,ip,r3'
| {standard input}:7026: Error: selected processor does not support Thumb mode `mla r3,ip,r0,r3'
| {standard input}:7215: Error: selected processor does not support Thumb mode `mla r3,r7,r0,r3'
| {standard input}:7230: Error: selected processor does not support Thumb mode `mla r3,r7,r0,r3'
| {standard input}:7241: Error: selected processor does not support Thumb mode `mla r3,r0,r7,r3'
| {standard input}:7256: Error: selected processor does not support Thumb mode `mla r3,r0,r7,r3'
| {standard input}:7267: Error: selected processor does not support Thumb mode `mla r3,r7,r0,r3'
| {standard input}:7287: Error: selected processor does not support Thumb mode `mla r3,r7,r6,r3'
| {standard input}:7301: Error: selected processor does not support Thumb mode `mla r3,r6,r5,r3'
| {standard input}:7319: Error: selected processor does not support Thumb mode `mla r3,r0,r5,r3'
| {standard input}:7327: Error: selected processor does not support Thumb mode `mla r3,r1,r0,r3'
| {standard input}:7594: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7604: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7614: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7624: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7634: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7647: Error: selected processor does not support Thumb mode `mla r3,r2,r5,r3'
| {standard input}:7657: Error: selected processor does not support Thumb mode `mla r3,r2,r5,r3'
| {standard input}:7815: Error: selected processor does not support Thumb mode `mla r3,r9,r7,r3'
| {standard input}:7837: Error: selected processor does not support Thumb mode `mla r3,r9,r0,r3'
| {standard input}:7853: Error: selected processor does not support Thumb mode `mla r3,r9,r0,r3'
| {standard input}:7875: Error: selected processor does not support Thumb mode `mla r3,r9,r7,r3'
| {standard input}:7891: Error: selected processor does not support Thumb mode `mla r3,r9,r7,r3'
| {standard input}:7908: Error: selected processor does not support Thumb mode `mla r3,r0,r6,r3'
| {standard input}:7931: Error: selected processor does not support Thumb mode `mla r3,r6,r5,r3'
| {standard input}:7952: Error: selected processor does not support Thumb mode `mla r3,r0,r5,r3'
| {standard input}:7960: Error: selected processor does not support Thumb mode `mla r3,r2,r0,r3'
| make[4]: *** [libbluetooth_sbc_la-sbc.lo] Error 1
| make[4]: Leaving directory `/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23/src'
| make[3]: *** [all-recursive] Error 1
| make[3]: Leaving directory `/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23/src'
| make[2]: *** [all] Error 2
| make[2]: Leaving directory `/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23/src'
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory `/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23'
| make: *** [all] Error 2
| + die 'oe_runmake failed'
| + bbfatal 'oe_runmake failed'
| + echo 'ERROR: oe_runmake failed'
| ERROR: oe_runmake failed
| + exit 1
| ERROR: Function 'do_compile' failed (see /OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/temp/log.do_compile.3404 for further information)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Martin Jansa [Tue, 18 Oct 2011 21:03:20 +0000 (23:03 +0200)]
libatomics-ops: force ARM mode
* otherwise ie spitz (armv5te) build fails with:
| make[3]: Entering directory `/OE/shr-core/tmp/work/armv5te-oe-linux-gnueabi/libatomics-ops-1.2-r5/libatomic_ops-1.2/src'
| arm-oe-linux-gnueabi-gcc -march=armv5te -mthumb -mthumb-interwork -mtune=xscale --sysroot=/OE/shr-core/tmp/sysroots/spitz -DHAVE_CONFIG_H -I. -fPIC -O
2 -pipe -g -feliminate-unused-debug-types -DNDEBUG -c atomic_ops.c
| arm-oe-linux-gnueabi-gcc -march=armv5te -mthumb -mthumb-interwork -mtune=xscale --sysroot=/OE/shr-core/tmp/sysroots/spitz -DHAVE_CONFIG_H -I. -fPIC -O
2 -pipe -g -feliminate-unused-debug-types -DNDEBUG -c atomic_ops_stack.c
| arm-oe-linux-gnueabi-gcc -march=armv5te -mthumb -mthumb-interwork -mtune=xscale --sysroot=/OE/shr-core/tmp/sysroots/spitz -DHAVE_CONFIG_H -I. -fPIC -O
2 -pipe -g -feliminate-unused-debug-types -DNDEBUG -c atomic_ops_malloc.c
| atomic_ops_malloc.c: In function 'msb':
| atomic_ops_malloc.c:223:2: warning: right shift count >= width of type [enabled by default]
| rm -f libatomic_ops_gpl.a
| ar cru libatomic_ops_gpl.a atomic_ops_stack.o atomic_ops_malloc.o
| arm-oe-linux-gnueabi-ranlib libatomic_ops_gpl.a
| {standard input}: Assembler messages:
| {standard input}:286: Error: selected processor does not support Thumb mode `swp r1,r2,[r3]'
| {standard input}:329: Error: selected processor does not support Thumb mode `swp r0,r1,[r3]'
* this is just work around, proper fix proposed by Henning Heinold
hm we should think of reworking this recipe now. Because since gcc 4.5
pulseaudio for arm can use the gcc internal atomicstuff and in oe-core
and meta-oe we have 4.5 or 4.6 only. The lib is
only needed for mips and it is still the old release, on cvs
is a much better version, which supports thumb too, if
remember correctly.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Martin Jansa [Thu, 10 Nov 2011 15:03:26 +0000 (16:03 +0100)]
util-linux: add missing u-a calls for setsid chrt
* someone added them to usrbinprogs_a, but without u-a calls added
* similar problem is with chfn chsh newgrp, but those are not built in
current version
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Martin Jansa [Thu, 10 Nov 2011 14:59:51 +0000 (15:59 +0100)]
util-linux: use u-a for flock and blockdev, conflicts with busybox
* nobody replied on
http://lists.linuxtogo.org/pipermail/openembedded-core/2011-September/009409.html
* be aware that all those renames to foo.${PN} are also applied for
native variants so now we have utils like
tmp-eglibc/sysroots/x86_64-linux/usr/bin/flock.util-linux-native
which are not used ie in
package_ipk.bbclass: package_update_index_ipk
because it calls just flock
so if that's problem then we should apply those renames only for
target version (and live with possible overwrites in -native sysroot)
or teach u-a postinst/prerm to happen also for sysroot population
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Martin Jansa [Thu, 20 Oct 2011 21:17:16 +0000 (23:17 +0200)]
subversion: add 1.7.0 with native support and negative D_P for now
* intentionaly with negative D_P, bitbake fetcher should be improved to
detect old checkout with newer subversion available or vice versa and
do svn upgrade automaticaly or show better error, but subversion as
client for target or -native for distributions which explicitly say
they want 1.7 (with PREFERRED_VERSION) can be available already from
oe-core.
* be aware that checkouts from 1.7.0 are not compatible with older
subversion clients (ie when builder populating distro PREMIRROR is
using 1.7.0 all builders need to have also 1.7.0)
* and also 1.7.0 client needs to call svn upgrade in checkout first in
order to use it (so if PREMIRROR has tarball from 1.6.x it won't work
on client using 1.7.0 unless fetcher2 is improved to detect this and
call svn upgrade)
* tested on SHR distribution
http://wiki.shr-project.org/trac/wiki/Building%20SHR#subversion1.7inshr-chroot
* only missing part is to add subversion-native dependency, so that
native subversion is built, before building ie elementary (because EFL
are using svnversion from configure.ac to detect source revision and
.svn dir needs to be from compatible version).
* read http://subversion.apache.org/docs/release-notes/1.7.html
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Simon Busch [Fri, 7 Oct 2011 10:01:56 +0000 (12:01 +0200)]
qt4-x11-free: bring back pkg-config fixups
* With b40b9c024be5e1ec81a31961158b3e6b529acfe0 some pkg-config fixups where removed from
qt4.inc which breaks the pkg-config files for qt4-embedded. Without that the pkg-config
files for qt4-x11-free are broken. So this patch puts the fixes into the qt4-x11-free.inc
file to be used by qt4-x11-free and not qt4-embedded.
* Resending because nobody replied on
http://www.mail-archive.com/openembedded-core@lists.openembedded.org/msg10609.html
Signed-off-by: Simon Busch <morphis@gravedo.de> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Otavio Salvador [Fri, 4 Nov 2011 20:34:15 +0000 (20:34 +0000)]
dhcp: generate initial leases files for server
If not using the init script it fails as the leases are created by it.
When used with systemd, this fails without the leases thus this allows
it to work out of box.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Added commit meesage from Otavio's email
Richard Purdie [Mon, 14 Nov 2011 17:43:45 +0000 (17:43 +0000)]
dpkg/update-alternatives: Fix dpkg version of update-alternatives to be usable
The version of dpkg the updates-alternatives-dpkg recipe pointed
at no longer used a perl script but a compiled binary. This meant
the "all" architecture field was invalid, as as the sed operation
during do_patch. All things considered the separate recipe was
pretty pointless.
This patch moves update-alternatives back to being built as part
of the dpkg recipe. It also moves various functionalty to the .inc
file which it belongs and fixes building and packaging of the dpkg
perl modules.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 14 Nov 2011 12:45:57 +0000 (12:45 +0000)]
base-passwd: Fix the broken preinst/postinstall
The preinst accesses file which may not yet have been unpacked.
The postinst is too late for the creation of these files
for at least the opkg backend.
This patch therefore encodes the file contents into the preinst,
resolving the various issues once and for all.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 11 Nov 2011 17:17:01 +0000 (17:17 +0000)]
opkg: Ensure we use the uname/gname fields when extracting tarballs
When extracting packages onto the target system in particular, we
really want to ensure the name fields in the tarball are used over
and above the numerical uid/gid values. This patch adds this
functionality to opkg and ensures package upgrades work correctly
permission wise.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 12 Nov 2011 08:36:55 +0000 (08:36 +0000)]
rootfs_ipk.bbclass: Ensure bad recommendations persist in the status file
Currently bad recommendations are added to the status file with status
"ok". After a single opkg command, whilst it will ignore the recommendation,
the status changes to "installed" even if the recommended package was not
installed. Whilst this is likely a glitch in opkg's logic, the correct
way to persist the information in the status file is to set the status
to "hold" as deinstall packages with that status remain. With this change
the bad recommendations persist accross multiple opkg runs and the system
behaves as expected.
[YOCTO #1758]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Wed, 9 Nov 2011 23:02:43 +0000 (17:02 -0600)]
shadow: Generate the shadow files at rootfs construction
With the recent changes to the shadow-native package support "--root",
we can now convert the passwd/group files to their shadow forms while
doing the rootfs install, instead of waiting to run on the target.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Mark Hatle [Thu, 10 Nov 2011 17:43:02 +0000 (11:43 -0600)]
rootfs_rpm.bbclass: Turn off script debugging
Disable script debugging, as the log files become huge and take a
long time to process during the log check step. This results in a
performance improvement.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Mark Hatle [Thu, 10 Nov 2011 16:30:21 +0000 (10:30 -0600)]
rootfs_rpm.bbclass: Enable pre and post install scripts
[YOCTO #1755]
We change the want the RPM rootfs install works to install pre and post install
scripts. The new method uses a script helper that is invoked by RPM outside
of the normal chroot.
The wrapper is dynamically generated prior to the install starting. It will
check the return code of the script. If the script fails, it will store a copy
to be executed on the first system boot. This is similar to the previous
mechanism.
In addition, a line of debug was added to the scripts as written by package_rpm
to list which package and which script for later debugging, if necessary.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Bruce Ashfield [Wed, 9 Nov 2011 16:19:16 +0000 (11:19 -0500)]
linux-yocto: config cleanups + romely rt support
Updating the meta branch SRCREV to pickup a series of BSP
cleanups and add -rt support to the romely.
ae3e64c meta/romley: Add rt support Add rt support to the meta branch for romley. 6c78969 meta/fishriver: enable hpet bc4452a meta/jasperforest: use power/intel feature 6e9634e meta/fri2: use power/intel feature ec949f5 meta/fishriver: use power/intel feature
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Kishore Bodke <kishore.k.bodke@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Darren Hart [Tue, 8 Nov 2011 18:21:28 +0000 (10:21 -0800)]
ncurses: refactor configure to avoid configuring widec when disabled
The ENABLE_WIDEC variable can be used to disable ncurses wide character support
when your C library doesn't support it. Currently, the do_configure step
configures for both narrow and wide characters regardless and only checks
ENABLE_WIDEC during compilation. This leads to QA failures with host
contamination during configure if the C library doesn't support wide characters.
Refactor do_configure with a new ncurses_configure helper function and only
configure for wide character support if ENABLE_WIDEC is true.
Ensure that configure errors are propogated back through to do_configure.
Tested with ENABLE_WIDEC as true and false via an ncurses bbappend on i586,
including basic error injection.
V2: INC_PR bump
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Martin Jansa [Tue, 8 Nov 2011 14:22:24 +0000 (15:22 +0100)]
libxml2: use Copyright in LIC_FILES_CHKSUM instead of COPYING
* COPYING is replaced by symlink to Copyright during do_configure
(see configure.in), then we end with link to nonexistent file
* same issue as libxslt had http://patchwork.openembedded.org/patch/14195/
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Richard Purdie [Tue, 8 Nov 2011 21:33:53 +0000 (21:33 +0000)]
Allow use of dash as /bin/sh
We've had the check for dash as /bin/sh for a long time. Dash has been
around long enough now that most major issues have been identified and
fixed from build perspective.
This patch fixes a bashism in the openjade-native recipe. It also
adjusts libtool so that the header at the script is used and not the
value of $SHELL. This is because many Makefiles change $SHELL so dash
can get used to execute what is otherwise configured as a bash shell
script. Since we don't need to execute scripts this way on any system I'm
aware of us building upon, the simplest fix is just to remove $SHELL.
With these two changes the dash check can be removed and we can allow
builds with dash as /bin/sh
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Note: I know I need to add the description of the libtool change above
into the prefix.patch]
Saul Wold [Tue, 8 Nov 2011 20:29:24 +0000 (12:29 -0800)]
udev-extraconf: blacklist /dev/md
Do not mount /dev/md by default via udev, this resolved a problem
with the sanity test failing due to seeing the error while attempting
to mount /dev/md0
Remove patch "0003-Patch-from-upstream-rev-2516.patch" because it has been merged
to source codes.
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
removing a now obsolete comment because the undistributable content was removed [1] from upstream’s tarball.
Also remove an empty line at the end introduced in the above commit.
Xiaofeng Yan [Tue, 8 Nov 2011 11:29:12 +0000 (19:29 +0800)]
local.conf.sample.extended: Fix bug 1674
[YOCTO #1674]
local.conf.sample.extended: An image based on gtk+-directfb don't need x11 for DEFAULT_FEATURES
Remove "x11" from DEFAULT_FEATURES and add "directfb" to it because someone could don't need x11 in their project, perhaps
gtk over directfb will meet his reqirement.
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Scott Garman [Wed, 9 Nov 2011 02:23:48 +0000 (18:23 -0800)]
useradd.bbclass: only modify packages in USERADD_PACKAGES
Previously we injected the user/group preinstall script into all
output packages. This fixes that so that only packages listed in
USERADD_PACKAGES get modified.
It also removes the USERADDPN variable, which is no longer needed.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Joshua Lock [Tue, 1 Nov 2011 21:46:43 +0000 (14:46 -0700)]
gconf: add upstream GNOME gconf 3.2.3 and drop gconf-dbus
The D-Bus backend has been integrated into upstream GConf so we can
switch to upstream and drop gconf-dbus.
I've gone for a release in the 3.2 series as we disable Gtk+, and
therefore are not impacted by the gtk+3 changes, and the D-Bus backend
was unstable before this release.
Joshua Lock [Wed, 2 Nov 2011 00:11:04 +0000 (17:11 -0700)]
classes/[gnome|gnomebase|mime]: enhance gnome related classes
This patch pulls in the gnome related classes from oe-core which
adds extra packaging rules and functionality whilst modularising things
so that one can get a subset of gnome functionality without adding a lot
of extra dependencies.
These aren't an exact copy of the classes from meta-openembedded, notable
differences are:
* gnome.bbclass - I dropped the BBCLASSEXTEND
* mime.bbclass:
- updated coding style
- use which to find update-mime-database program rather than hard coded
- fix typo in populate_packges_append such that it's actually called
Joshua Lock [Tue, 8 Nov 2011 23:31:32 +0000 (15:31 -0800)]
shared-mime-info: package runtime data separately
The freedesktop.org.xml is required when updating the mime database but
otherwise not much use. Therefore package it separately, rather than
removing it completely, so that it can be used as required for on-device
updates without adding almost 2MB to every image which hase shared-mime-info.
Paul Eggleton [Wed, 9 Nov 2011 11:33:41 +0000 (11:33 +0000)]
busybox: add grep to temporary links during uninstall
In the busybox package prerm we set up some temporary links and modify
PATH so that certain utilities are provided for the purpose of running
update-alternatives; if grep is not among these then you get errors when
removing busybox, so add a temporary link for grep as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
