Richard Purdie [Tue, 16 Aug 2016 17:00:13 +0000 (18:00 +0100)]
devtool/recipetool/meta: Adapt to bitbake API changes for multi-configuration builds
Unfortunately to implenent multiconfig support in bitbake some APIs
had to change. This updates code in OE to match the changes in bitbake.
Its mostly periperhal changes around devtool/recipetool
[Will need a bitbake version requirement bump which I'll make when merging]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
parselogs.py: Add failed to setup card detect gpio error on x86
This error has occurred on the MinnowBoard Max and Turbot since its
inception. It supposedly indicates a non-working SD card reader, but
ours works fine. Whitelist the error.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
parselogs.py: Ignore Skylake graphics firmware load errors on genericx86-64
These errors can't be fixed without adding the firmware to the initramfs
and building it into the kernel, which we don't want to do for
genericx86-64. Since graphics still work acceptably without the firmware
blobs, just ignore the errors for that MACHINE.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patrick Ohly [Fri, 29 Jul 2016 14:58:52 +0000 (17:58 +0300)]
image.bbclass: rename COMPRESS(ION) to CONVERSION
With the enhanced functionality, the term "compression" is no longer
accurate, because the mechanism also gets used for conversion
operations that do not actually compress data.
It is possible to remove this naming problem in a backward-compatible
manner by including COMPRESSIONTYPES in CONVERSIONTYPES and checking for
the old COMPRESS_CMD/DEPENDS as fallbacks.
[YOCTO #9346]
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
grub-editenv edits the env block at runtime on a booted system. Other
tools can depend on it to configure a live system, for ex. to set next
boot mode upon reboot. By splitting grub-editenv, tools don't have to
depend on the entire grub package (grub-editenv just edits one file).
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com> Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
André Draszik [Tue, 16 Aug 2016 10:38:34 +0000 (11:38 +0100)]
connman: add missing space in _append
We do that everywhere else, and otherwise anybody
extending SRC_URI through bbappend must know to
add a space at the end, which is an unusual
requirement.
Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Ross Burton <ross.burton@intel.com>
Bruce Ashfield [Mon, 15 Aug 2016 18:26:59 +0000 (14:26 -0400)]
kernel-yocto: streamline patch, configuration and audit phases
We've been running with a set of kern-tools that were designed to work
with build systems that knew nothing about git, trees, commits, etc.
As such, there's been a set of shims/wrappers in place to work with
within bitbake/oe-core. These were the *me scripts: createme, updateme,
patchme and configme.
With this commit, we strip that legacy code and use the tools directly.
This means less complexity, fewer corner cases .. and no surprises
when the tools are arunning. As another benefit, the tools consume
much less time during a typical build and have no noticeable impact
on the overall build time.
Existing .scc files, features, and processing are not impacted as
these tools are compatible with existing feature descriptions and
kerne configuration fragments.
The audit of kernel configuration fragments is now detached
from the linux-yocto build structure and process. This means that
they can eventually be tweaked to offer kernel audit to any type of
kernel build and configuration process.
Additionally, the kernel symbol audit phase can now resolve symbol
dependencies and offer guidance when a symbol is missing:
WARNING: linux-yocto-4.4.15+gitAUTOINC+b030d96c7b_f5e2c49d58-r0 do_kernel_configcheck: [kernel config]: specified values did not make it into the kernel's final configuration:
Bruce Ashfield [Mon, 15 Aug 2016 18:26:58 +0000 (14:26 -0400)]
linux-yocto/4.4: -rt update patch meta-data to remove ()
The existing kernel patching scripts don't like () in patch names, since they
are detected as function calls. Although the scripts will be updated to avoid
this error, it is worthwhile fixing the patch names in the meantime.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Bruce Ashfield [Mon, 15 Aug 2016 18:26:57 +0000 (14:26 -0400)]
linux-yocto/4.1: config updates
Integrating the following configuration changes:
features: usb-net: provide more coverage on USB network devices
features: broxton: enable iTCO watchdog support
features: broxton: enable iSMT support
features: broxton: enable LPC bridge function for Intel ICH and SCH
Signed-off-by: Bruce Ashfield <bruce@zedd.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
There was an issue with a netfilter backport in 4.1.28-stable. To
address it, we backport the -stable fix:
netfilter: x_tables: fix stable backport
Stable-4.1 backport of mainline commit 364723410175 ("netfilter:
x_tables: validate targets of jumps") doesn't handle correctly the fact
that 4.1 kernel is missing commit 482cfc318559 ("netfilter: xtables:
avoid percpu ruleset duplication") so that t->entries is still a per-cpu
array in find_jump_target().
Use the same fix as e.g. stable-3.14 backport.
Fixes: 8163327a3a92 ("netfilter: x_tables: validate targets of jumps") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Wed, 17 Aug 2016 11:53:16 +0000 (12:53 +0100)]
gobject-introspection: Ensure prelink config file exists to avoid build failures
gobject-introspection relies upon prelink-rtld. In order to function correctly,
we generate an ld.so.conf file which is generated before users of prelink-rtld
are called.
There is currently a race in gobject-introspection since the configuration file
may not have been created. This adds in code to ensure that regardless of codepath
(new build, existing build, from sstate), we trigger the creation of the configuration
file and avoid build failures.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Markus Lehtonen [Wed, 29 Jun 2016 17:11:28 +0000 (20:11 +0300)]
oe-build-perf-test: suppress logger output when tests are being run
Prevent logger from writing to stderr when the tests are being run by
the TestRunner. During this time the logger output is only written to
the log file. This way the console output from the script is cleaner and
not mixed with possible logger records.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Wed, 29 Jun 2016 16:45:41 +0000 (19:45 +0300)]
oeqa.buildperf: introduce runCmd2()
Special runCmd() for build perf tests which doesn't raise an
AssertionError when the command fails. This causes command failures to
be detected as test errors instead of test failures. This way "failed"
state of tests is reserved for future making it possible to set e.g.
thresholds for certain measurement results.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Wed, 29 Jun 2016 16:28:31 +0000 (19:28 +0300)]
oeqa.buildperf: add BuildPerfTestResult class
The new class is derived from unittest.TextTestResult class. It is
actually implemented by modifying the old BuildPerfTestRunner class
which, in turn, is replaced by a totally new simple implementation
derived from unittest.TestRunner.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Mon, 27 Jun 2016 12:05:10 +0000 (15:05 +0300)]
oeqa.buildperf: derive BuildPerfTestCase class from unitest.TestCase
Rename BuildPerfTest to BuildPerfTestCase and convert it to be derived
from TestCase class from the unittest framework of the Python standard
library. This doesn't work with our existing testcases or test runner
class and these need to be modified, too.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Aníbal Limón [Thu, 11 Aug 2016 20:18:16 +0000 (15:18 -0500)]
oeqa/runtime/syslog.py: Improve test_syslog_logger on systemd
When an image uses systemd journald acts as a main syslog daemon using
/dev/log.
The test_syslog_logger try to log a predifined message into the syslog
using logger and then search using grep in /var/log/messages if this
fails for some reason (file rotated) now search the predifined message
into the journal.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
python3.5-manifest: Fixes several dependencies on the newest python3
This patch adds the following packages: python3-enum (needed by python3-git),
python3-selectors (needed by python3-subprocess), python3-signal (needed by python3-subprocess),
and it also fixes the following ones with missing dependencies: python3-subprocess,
python3-compression, python3-datetime
[YOCTO #10127] [YOCTO #10124] [YOCTO #10122]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Khem Raj [Fri, 12 Aug 2016 18:10:22 +0000 (11:10 -0700)]
gmp: Fix wrong detection of -march flag
Configure detects -march flag based upon target
triplet, it wrongly passes -march=armv4 for all
arm, this is unearthed when compiling with clang
since it errors out with flags like
/tmp/kraj01/a-0c2038.s:27: Error: selected processor does not support `bx r0' in ARM mode
since it does not pass --fix-v4bx along with
-march=armv4, which does not happen with gcc
toolchain since this flag is passed impicitly hence
this error was indetected
Fixed thusly
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ming Liu [Tue, 9 Aug 2016 08:01:41 +0000 (10:01 +0200)]
Use PYTHON_SITEPACKAGES_DIR insted of hard-coded *site-packages*
For thoese recipes that are inheriting python*-dir.bbclass, there is
already a PYTHON_SITEPACKAGES_DIR present, use that definition replacing
redundant "${libdir}/python*/site-packages".
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Awais Belal [Mon, 1 Aug 2016 11:31:43 +0000 (16:31 +0500)]
init-install*: /etc/mtab make a link rather than a copy
Using a copy would only make management of devices erroneous
and makes the system unstable in some scenarios as tools will
have to manipulate both files separately. A link ensures that
both files /proc/mounts and /etc/mtab will have the same
information at all times and this is how it is handled
on newer systems where there is such a need. Same is
suggested by busybox.
Signed-off-by: Awais Belal <awais_belal@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
pre-5.25.0 perl by default tries to link to an antiquated libnm (new
math) which is not used anymore since the early 1990's. After 2014
another libnm appeared for NetworkManager causing build failures.
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Thu, 11 Aug 2016 04:45:07 +0000 (16:45 +1200)]
classes/populate_sdk_ext: drop duplicated error message
The preparation script itself prints out an error on failure, and we
aren't redirecting its output anymore, so we no longer need to print out
a message here when it fails. At the same time, make the message printed
out by the script a little clearer - we're just writing the log out to
the file, we shouldn't give the user an expectation that there will be
extra details in there (other than the output produced by
oe-init-build-env there won't be).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Thu, 11 Aug 2016 04:45:06 +0000 (16:45 +1200)]
classes/populate_sdk_ext: add some pre-install checks
Check a number of things as early as possible in the eSDK installer
script so that the user gets an error up front rather than waiting for
the build system to be extracted and then have the error produced:
* Check for missing utilities specified in SANITY_REQUIRED_UTILITIES
(along with gcc and g++), taking into account that some of these are
satisfied by buildtools which ships as part of the SDK. We use the
newly added capability to list an SDK's contents to allow us to see
exactly which binaries are inside the buildtools installer.
* Check that Python is available (since the buildtools installer's
relocate script is written in Python).
* Check that locale value set by the script is actually available
* Check that the install path is not on NFS
This does duplicate some of the checks in sanity.bbclass but it's
difficult to avoid that given that here they have to be written in shell
and there they are written in Python, as well as the fact that we only
need to run some of the checks here and not all (i.e. the ones that
relate to the host system or install path, and not those that check the
configuration or metadata). Given those issues and the fact that the
amount of code is fairly small I elected to just re-implement the checks
here.
Fixes [YOCTO #8657].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Thu, 11 Aug 2016 04:45:05 +0000 (16:45 +1200)]
toolchain-shar-extract.sh: add option to list contents
Add a -l command-line option for SDK installers to get a list of files
that will be extracted by the SDK - internally this just runs "tar tv"
on the embedded tarball. This can be used to look at which files the SDK
provides without actually installing it. The initial user of this is the
extensible SDK build process which needs to know what binaries are going
to be installed by the buildtools installer without installing it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Determine the name of the current buildtools installer ahead of time,
set it in a variable and use that variable rather than the wildcarded
version everywhere, since it's much tidier.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
If the buildtools installation failed, we were using a subshell instead
of a compound command and thus the subshell exited but the script
continued on, which is really not what we want to happen. Additionally
log the buildtools installer output to a file and cat it if it fails so
that you can actually see what went wrong, as well as amending the
environment setup script to print a warning as we do when the
preparation fails.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Thu, 11 Aug 2016 04:45:02 +0000 (16:45 +1200)]
lib/oe/copy_buildsystem: fix merging sstate directories for eSDK
When we don't have uninative enabled there's more merging to be done in
the default configuration (SDK_EXT_TYPE = "full" which by default means
SDK_INCLUDE_TOOLCHAIN = "1") and there are likely files that already
exist in the sstate feed we're assembling, so we need to take care to
merge the directory contents rather than just moving the directories
over. Additionally we now only run this if uninative genuinely isn't
enabled (i.e. NATIVELSBSTRING is different to the fixed value of
"universal".)
In the process of fixing this I discovered an unusual behaviour in
os.rename() - when we're merging these feeds we're dealing with
hard-linked sstate artifacts, and whilst os.rename() is supposed to
silently overwrite an existing destination (permissions allowing), if
you have the source and destination as hardlinks to the same file then
the os.rename() call will just silently fail. As a result the code now
just checks if the destination exists and deletes the source if so
(since we know it will be the same file, we don't need to check in this
case.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
* We shouldn't be deleting the downloads directory here, since it
contains the uninative tarball that we will need
* TMPDIR might not be named "tmp" - in OE-Core the default is tmp-glibc
so use the actual name of TMPDIR here instead.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Thu, 11 Aug 2016 04:45:00 +0000 (16:45 +1200)]
classes/populate_sdk_ext: handle lack of uninative when filtering sstate
If the build in which the eSDK is being built isn't using uninative,
this will have an effect on NATIVELSBSTRING, which will mean that the
eSDK installer won't be able to find any of the native sstate packages.
To keep things simple, under this scenario just disable uninative
temporarily while we run the SDK installer to help us check the presence
of the sstate artifacts we need. Ideally I'd rather not have things like
this that are artificial in this verification step, but on the other
hand this was the least ugly way to solve the problem.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Thu, 11 Aug 2016 04:44:59 +0000 (16:44 +1200)]
classes/populate_sdk_ext: ensure eSDK can build without uninative enabled
We were relying on uninative being enabled in the build in which the
eSDK was being produced, which is not the case for example for OE-Core's
default configuration. Move the code that copies the uninative tarball
and writes the checksum to copy_buildsystem so that it happens early
enough for that part of the configuration to be set up when we do the
filtering (which requires running bitbake).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Thu, 11 Aug 2016 04:44:58 +0000 (16:44 +1200)]
gen-lockedsig-cache: ensure symlinks are dereferenced
If you set up a local mirror in SSTATE_MIRRORS then you can end up with
symlinks in SSTATE_DIR rather than real files. We don't want these
symlinks in the sstate-cache prodcued by gen-lockedsig-cache, so
dereference any symlinks before copying.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Thu, 11 Aug 2016 04:37:34 +0000 (16:37 +1200)]
oe-buildenv-internal: hint at specifying bitbake path in error message
If you check out OE-Core and then run oe-init-build-env you get an error
about not having bitbake checked out in a "bitbake" subdirectory,
however it's possible to specify the bitbake path on the
oe-init-build-env command line, so hint at that in the error message
rather than implying it has to be in the default location.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Andre McCurdy [Thu, 11 Aug 2016 08:38:54 +0000 (01:38 -0700)]
ccache.bbclass: don't remove CCACHE_DIR as part of do_clean
Removing the ccache directory as part of do_clean is unnecessarily
conservative and defeats many of the benefits of ccache.
The original justification for this behaviour was to avoid confusion
in the corner case that the ccache directory becomes corrupted.
However the standard approach for dealing with such highly unlikely
corner cases (ie manually removing tmp) would also recover from
corruption of the ccache directories, without the negative impact of
defeating ccache during normal development.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Dmitry Rozhkov [Wed, 10 Aug 2016 09:47:56 +0000 (12:47 +0300)]
systemd: fix typo in avoid-using-system-auth.patch
The patch 0015-systemd-user-avoid-using-system-auth.patch
makes PAM session for systemd-user include common-account file
which doesn't contain any session related lines and that breaks
launching "systemd --user" with the error:
Jul 29 13:03:24 intel-corei7-64 systemd[691]: user@0.service: Failed
at step PAM spawning /lib/systemd/systemd: Operation not permitted
This change fixes the patch by including common-session file
instead.
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Awais Belal [Wed, 10 Aug 2016 08:14:16 +0000 (13:14 +0500)]
init-install*: only pick root mmc devices
Some eMMC devices show special sub-devices such as mmcblk0boot0
etc. The installation script currently pick all of them up and
displays it to the user which makes some confusions because these
sub-devices are pretty small and complete installation including
rootfs won't be possible in most cases.
We simply now drop these sub-devices and only present the user
with the root of such mmc devices.
Signed-off-by: Awais Belal <awais_belal@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Yi Zhao [Wed, 10 Aug 2016 07:11:18 +0000 (15:11 +0800)]
tiff: Security fix CVE-2016-3186
CVE-2016-3186 libtiff: buffer overflow in the readextension function in
gif2tiff.c allows remote attackers to cause a denial of service via a
crafted GIF file
Jackie Huang [Wed, 10 Aug 2016 03:19:44 +0000 (11:19 +0800)]
e2fsprogs: Fix missing check for permission denied.
If the path to "ROOT_SYSCONFDIR /mke2fs.conf" has a permission denied problem,
then the get_dirlist() call will return EACCES. But the code in profile_init
will treat that as a fatal error and all executions will fail with:
Couldn't init profile successfully (error: 13).
But the problem should not really be visible for the target package as the path
then will be "/etc/mke2fs.conf", and it is not likely that a user have no
permission to read /etc.
Signed-off-by: Jian Liu <jian.liu@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
initrdscripts/init-install*: Add rootwait when installing to USB devices
It can take a bit for USB devices to be detected, so if a USB device is
your rootfs and you don't set rootwait you will most likely get a kernel
panic. Fix this by adding rootwait to the kernel command line on
installation.
Fixes [YOCTO #9462].
Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Mike Looijmans [Tue, 9 Aug 2016 12:19:00 +0000 (14:19 +0200)]
dropbear/init: Allow extra arguments for key generation
This patch adds DROPBEAR_RSAKEY_ARGS and DROPBEAR_DSSKEY_ARGS optional
parameters to /etc/default/dropbear. The contents are simply passed to
the 'dropbearkey' program when generating a host key.
The default keysize for RSA is currently 2048 bits. It takes a CortexA9
running at 700MHz between 4 and 10 seconds to calculate a keypair. The
board boots Linux in about a second, but you have to wait for several
seconds because of the keypair generation. This patch allows one to put
the line DROPBEAR_RSAKEY_ARGS="-s 1024" into /etc/default/dropbear, and
have a host key generated in about 0.2 seconds on the same CPU. This is
particulary useful for read-only rootfs systems which generate a key on
each boot.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Ross Burton <ross.burton@intel.com>
initramfs-live-boot: Make sure we kill udev before switching root when live booting
When live booting, we need to make sure the running udev processes are killed
to avoid unexepected behavior, we do this just before switching root,
once we do, a new udev process will be spawned from init and will take care
of whatever work was still missing
[YOCTO #9520]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Mark Hatle [Mon, 7 Dec 2015 21:36:11 +0000 (15:36 -0600)]
cross-canadian.bbclass: Add BASECANADIANEXTRAOS to specify main extraos
By default the system will expand the extra os entries for uclibc and musl
even if they are not enabled in the build. There was no way to prevent this
behavior while still getting the expansion for things like x32 or spe.
The change adds a new setting which a distribution creator can override
easily, setting the base set of canadianextraos components. The other
expansions are then based on this setting.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Mon, 15 Aug 2016 16:56:40 +0000 (17:56 +0100)]
oeqa/oetest: Improve subprocess error reporting
Without this, we get to know the command failed and the exit code but
have no idea how the command failed since we don't get the output by
default.
This makes it much easier to see what went wrong and stand a chance of
fixing it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 15 Aug 2016 17:05:24 +0000 (18:05 +0100)]
report-error: Fix tracebacks
Currently the code gives tracebacks if there are no recipes to be built in a
BuildStarted event. Parse the list into a string rather than just taking the
first item. There is nothing special about the first time.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 12 Aug 2016 22:00:11 +0000 (23:00 +0100)]
uninative: Update to 1.3
Uninative 1.2 didn't contain the nativesdk locale fix we really needed
to release and update to uninative 1.3 which does contain that fix
and also uses glibc 2.24 final release.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stephano Cetola [Wed, 10 Aug 2016 20:03:16 +0000 (13:03 -0700)]
Allow for simultaneous do_rootfs tasks with rpm
Give each rootfs its own RPM channel to use. This puts the RPM metadata
in a private subdirectory of $WORKDIR, rather than living in DEPLOY_DIR
where other tasks may race with it.
This allows us to reduce the time that the rpm.lock is held to only the
time needed to hardlink the RPMs, allowing the majority of the rootfs
operation to run in parallel.
Also, this fixes the smart tests by generating an index for all packages
at the time of the test, rather than using the one provided by the
rootfs process.
Original credit for the enhancement should go to Steven Walter
stevenrwalter@gmail.com.
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 9 Aug 2016 15:11:44 +0000 (16:11 +0100)]
connman: clean up musl fixes
The upstreamable include fixes have been sent upstream. The patch set adds
AC_USE_SYSTEM_EXTENSIONS so we don't need to explictly define _GNU_SOURCE
anymore.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 9 Aug 2016 11:12:02 +0000 (12:12 +0100)]
connman: disable version-scripts to fix crashes at startup
With binutils 2.27 on at least MIPS, connmand will crash on startup. This
appears to be due to the symbol visibilty scripts hiding symbols that stdio
looks up at runtime, resulting in it segfaulting.
This certainly appears to be a bug in binutils 2.27 although the problem has
been known about for some time:
Stefan Agner [Mon, 8 Aug 2016 05:47:28 +0000 (22:47 -0700)]
busybox: Fix busybox-init on non-tty consoles
When using non-tty consoles (e.g. VirtIO console /dev/hvc0) the
current init system fails with:
process '/sbin/getty 115200 hvc0' (pid 545) exited. Scheduling for restart.
can't open /dev/ttyhvc0: No such file or directory
The first field needs to be a valid device. The BusyBox inittab example
explains as follows:
"<id>: WARNING: This field has a non-traditional meaning for BusyBox init!
The id field is used by BusyBox init to specify the controlling tty for
the specified process to run on. The contents of this field are
appended to "/dev/" and used as-is."
Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Ross Burton <ross.burton@intel.com>
Prior to running oe_runmake make sure $B is the cwd. This is required
due to bitbake commit 67a7b8b021badc17d8fdf447c250e79d291e75f7
"build: don't use $B as the default cwd for functions".
Without this change, do_concat_dtb fails with:
| ERROR: oe_runmake failed
| make: *** No targets specified and no makefile found. Stop.
Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
