Signed-off-by: Jussi Laako <jussi.laako@linux.intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Bruce Ashfield [Wed, 1 Feb 2017 15:30:29 +0000 (10:30 -0500)]
kern-tools: re-enable scc merge command
The ability to merge two branches directly from a .scc file was
dropped during the streamlining of the tools.
As was pointed out by David Vincent <freesilicon@gmail.com>, there is
once again a valid use case for this functionality, so we restore the
capability.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Bruce Ashfield [Wed, 1 Feb 2017 15:30:28 +0000 (10:30 -0500)]
kernel-yocto/features: enable TPM
Adding a feature fragment that enables a broad range of TPM
drivers. They service as a baseline for production kernels.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Bruce Ashfield [Wed, 1 Feb 2017 15:30:27 +0000 (10:30 -0500)]
linux-yocto/4.9: update to 4.9.4
Integrating the korg -stable release with the following changes:
75353ac8ff43 Linux 4.9.4 6fea974494af rtlwifi: rtl_usb: Fix missing entry in USB driver's private data 7dae85b5c355 rtlwifi: Fix enter/exit power_save 3f41ee3a45cb drm/i915/gen9: Fix PCODE polling during CDCLK change notification 93f2976eb027 ALSA: usb-audio: Add a quirk for Plantronics BT600 f52e670a5b29 spi: mvebu: fix baudrate calculation for armada variant 05b7bdf1c3d8 ARM: omap2+: am437x: rollback to use omap3_gptimer_timer_init() b8ba5faa7a6b ARM: 8631/1: clkdev: Detect errors in clk_hw_register_clkdev() for mass registration 87dbf3dc1652 ARM: OMAP4+: Fix bad fallthrough for cpuidle b336dc57bc92 ARM: OMAP5: Fix build for PM code 0f665deba9bc ARM: OMAP5: Fix mpuss_early_init aa1c7b01c9c7 bus: arm-ccn: Prevent hotplug callback leak bd99e7a6036e svcrdma: Clear xpt_bc_xps in xprt_setup_rdma_bc() error exit arm c2ce1c4133b3 ARM: qcom_defconfig: Fix MDM9515 LCC and GCC config e925eb342659 ARM: zynq: Reserve correct amount of non-DMA RAM 78e2d9405e2d ARM: pxa: fix pxa25x interrupt init 596ff0afbe8e ARM64: dts: bcm2835: Fix bcm2837 compatible string e3937bc1cc0b ARM64: dts: bcm2837-rpi-3-b: remove incorrect pwr LED d40152d5ac67 arm64: dts: mt8173: Fix auxadc node 08aed6e8883d tools/virtio: fix READ_ONCE() e7d05ec1923e powerpc: Fix build warning on 32-bit PPC 2fc33ff4ba81 ALSA: firewire-tascam: Fix to handle error from initialization of stream data 2c867216c555 HID: hid-cypress: validate length of report e425ed1d3c75 net: vrf: do not allow table id 0 7b7a5a85b1d9 net: ipv4: Fix multipath selection with vrf 7cc73483a4c7 net/mlx5e: Remove WARN_ONCE from adaptive moderation code 17a561b19a27 gro: Disable frag0 optimization on IPv6 ext headers 934ca017c850 gro: use min_t() in skb_gro_reset_offset() ec0fdcb88c6f gro: Enter slow-path if there is no tailroom 33364eee1fe4 net: add the AF_QIPCRTR entries to family name tables 2ff4a0243c9e net: dsa: Ensure validity of dst->ds[0] 66f24d624baa r8152: fix rx issue for runtime suspend c8a89b4f5248 r8152: split rtl8152_suspend function 294f2c889637 net: dsa: bcm_sf2: Utilize nested MDIO read/write ac77aab46168 net: dsa: bcm_sf2: Do not clobber b53_switch_ops b55f6ca7380d bpf: change back to orig prog on too many passes a4d205a59521 net: vrf: Add missing Rx counters efc455f08ea8 ipv4: Do not allow MAIN to be alias for new LOCAL w/ custom rules fe1e13cfe2c4 igmp: Make igmp group member RFC 3376 compliant 7826d11cf44c flow_dissector: Update pptp handling to avoid null pointer deref. 9f65f5d4746b drop_monitor: consider inserted data in genlmsg_end 9f7551e05b0f drop_monitor: add missing call to genlmsg_end a8a213f296ae net: ipv4: dst for local input routes should use l3mdev if relevant e7422080e35d net: fix incorrect original ingress device index in PKTINFO 2ffc694b5727 rtnl: stats - add missing netlink message size checks 8cb7d6277f01 net/mlx5e: Disable netdev after close ee9f2fd3f6b6 net/mlx5e: Don't sync netdev state when not registered 33c782dd1514 net/mlx5: Prevent setting multicast macs for VFs b22c86ff8e78 net/mlx5: Mask destination mac value in ethtool steering rules efbbc75c00fc net/mlx5: Avoid shadowing numa_node ca8a64467f2a net/mlx5: Cancel recovery work in remove flow 7bf1de7f2749 net/mlx5: Check FW limitations on log_max_qp before setting it 9b4a34ff8987 net/sched: cls_flower: Fix missing addr_type in classify 99f40c6bf565 net: stmmac: Fix race between stmmac_drv_probe and stmmac_open 09babe4ce12e net, sched: fix soft lockup in tc_classify ee99e2bc5e8a ipv6: handle -EFAULT from skb_copy_bits d36a1cb1e328 inet: fix IP(V6)_RECVORIGDSTADDR for udp sockets ed3cc329c7bc sctp: sctp_transport_lookup_process should rcu_read_unlock when transport is null 8b8fbe5c25ab net: vrf: Drop conntrack data after pass through VRF device on Tx d4a0b2e40c46 net: vrf: Fix NAT within a VRF
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Fabio Berton [Mon, 30 Jan 2017 16:27:00 +0000 (14:27 -0200)]
libbsd: libbsd-overlay.pc: Set Cflags to use -I instead of -isystem
pkg-config currently only handles -I and -L correctly, but misses
-isystem, so we need to do this workaround to fix this issue.
There's a open bug in:
https://bugzilla.freedesktop.org/show_bug.cgi?id=99516
This appears when building lldpd and shows error:
ERROR: lldpd-0.9.6-r0 do_configure: This autoconf log indicates
errors, it looked at host include and/or library paths while
determining system capabilities.
Rerun configure task after fixing this.
ERROR: lldpd-0.9.6-r0 do_configure: Function failed: do_qa_configure
Change-Id: I83255b5952e19bb2f516b1186276cd03eb67eed3 Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com>
a) 22794.25user 2687.88system 30:32.84elapsed 1390%CPU (0avgtext+0avgdata 919056maxresident)k
b) 22677.25user 3238.79system 36:16.68elapsed 1190%CPU (0avgtext+0avgdata 918896maxresident)k
c) 23571.84user 3383.65system 31:36.83elapsed 1421%CPU (0avgtext+0avgdata 919068maxresident)k
For the overall build and sstate directories, du -s shows:
a) 3992588 build-pre-rss/sstate-cache 30804484 build-pre-rss/tmp
b) 4013272 build-with-rss/sstate-cache 36519084 build-with-rss/tmp
c) 4014744 build-with-rss2/sstate-cache 35336960 build-with-rss2/tmp
However more worryingly:
$ du -s build-pre-rss/tmp/sysroots/ 2506092 build-pre-rss/tmp/sysroots/
$ du -s build-with-rss/tmp/sysroots-components/ 3790712 build-with-rss/tmp/sysroots-components/
$ du -s build-with-rss2/tmp/sysroots-components/ 2467544 build-with-rss2/tmp/sysroots-components/
These numbers *should* be equivalent but as you can see, b) is ~1.2GB larger. The reason turned out
to be patchelf. Taking a specific binary from a specific recipe, bc from bc-native, in a) its 82kb
(stripped) yet in b) its 2.17MB.
$ ./patchelf --set-interpreter /bin/rp bc
warning: working around a Linux kernel bug by creating a hole of 2084864 bytes in ‘bc’
https://github.com/NixOS/patchelf/blob/master/src/patchelf.cc#L710 shows that this "hole" is just
padded zeros using memset, its not a proper sparse hole.
This patch copies files with cp --sparse=always after modifying them with patchelf, then replacing
the original file. The better fix will be to fix this in patchself itself and seek() there
when writing the new file but that means new uninative tarballs and will take a bit of work
so I'm proposing this workaround in the meantime.
Also, this patch drops error handling since subprocess check_output() tracebacks will print this
information if the command fails so we can simplify the code.
Ed Bartosh [Thu, 2 Feb 2017 13:32:58 +0000 (15:32 +0200)]
wic: direct: fix creation of work directory
It was a typo in current code: mktemp was used instead of
mkdtemp to create work directory. This is fixed by using
mkdtemp.
Create work directory as a subdirectory of output directory
to make sure both are on the same partition to make moving
of result image faster.
This also fixes possible disk space issues as mkdtemp uses
TMPDIR, TEMP or TMP environment variables to get default value
of its 'dir' parameter. Those variables are usually pointing
to /tmp, which is not the best location to create huge images.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
selftest/runtime-tests: Modify positins test to reduce execution time
Currently test_postinst_roofs_and_boot is building a full-cmdline image
this is taking a lot of time to execute the test, so a minimal image
will be build instead.
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ed Bartosh [Wed, 1 Feb 2017 10:29:32 +0000 (12:29 +0200)]
wic: remove syslinux.py
This module contains singe function serial_console_form_kargs, which
is used only by rootfs_pcbios_ext plugin. Moved it there and removed
syslinux module to make it easy to find and mainain plugin code.
Ed Bartosh [Tue, 31 Jan 2017 09:46:11 +0000 (11:46 +0200)]
wic: renamd direct_plugin.py -> direct.py
As this files is located in plugins/imager subdirectory it's
obvious that it's an imager plugin. Renamed to direct.py to
be consistent with plugin naming scheme.
[YOCTO #10619]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Ed Bartosh [Tue, 31 Jan 2017 01:43:56 +0000 (03:43 +0200)]
wic: improve naming in direct_plugin classes
Synchronized attribure names in DirectImageCreator and
DirectPlugin for better readability. Simplified code,
removed unneeded global variable disk_methods.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Ed Bartosh [Mon, 30 Jan 2017 21:54:29 +0000 (23:54 +0200)]
wic: moved content of direct.py to direct_plugin
This move simplifies directory structure and makes
further refactoring easier. The code from direct.py was used
only in direct_plugin, so it's safe to move it there.
[YOCTO #10619]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Ed Bartosh [Mon, 30 Jan 2017 21:31:53 +0000 (23:31 +0200)]
wic: direct_plugin: stop using config manager
This is a preparation to removing conf.py and config/wic.conf
from the codebase.
Got rid of using configmgr global object in direct_plugin and direct
modules. It was used to implicitly parse kickstart file and set
couple of variables.
Replaced usage of configmgr by passing parameters directly to the
DirectImageCreator.
[YOCTO #10619]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Ed Bartosh [Mon, 30 Jan 2017 21:23:00 +0000 (23:23 +0200)]
wic: creator: stop using config manager
This is a preparation to removing conf.py and config/wic.conf
from the codebase.
confmgr object is complicated for no reason and almost
useless as all configuration info comes from command line and
bitbake variables. It's used it creator.py to store information
about output directory, logs and some never used functionality
like tmpfs for future use, which doesn't actually happen.
[YOCTO #10619]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Ross Burton [Tue, 31 Jan 2017 20:24:32 +0000 (20:24 +0000)]
pkg-config: depend on pkgconfig-native for target builds
When building for the target, pkg-config uses the target glib-2.0 instead of
it's own minimal fork. To find this it needs to use pkg-config so ensure this
dependency exists in case it doesn't exist on the host already.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Wed, 1 Feb 2017 11:29:06 +0000 (11:29 +0000)]
staging: Reduce the number of mkdirs calls
The number of mkdir calls was showing up high on the profile charts since
it was getting called once per file which is excessive. Each call results
in one or more syscalls which is bad for performance. Cache which
directories we've seen to reduce the calls to a more reasonable number
and speed up recipe specific sysroots.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 1 Feb 2017 11:25:32 +0000 (11:25 +0000)]
sstate/staging: Batch log messages for performance
According to profile data, repeated calls to bb.debug and bb.note in
the extend_recipe_sysroot() codepath were accounting for 75% of the time
(1.5s) in calls from tasks like do_image_complete.
This batches up the log messages into one call into the logging system
which gives similar behaviour to disabling the logging but retains the
debug information.
Since setscene_depvalid is also called from bitbake's setscene code,
we have to be a little creative with the function parameters and leave
the other debug output mechanism in place. This should hopefully
speed up recipe specific sysroots.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 30 Jan 2017 23:18:09 +0000 (23:18 +0000)]
binutils-cross: Remove exec_prefix from the linker search path
We don't put target libs into a native/cross ${exec_prefix} but having
this in the default search path means all linker scripts have to be relocated.
This is a considerable chunk of files to create multiple copies of for no good
reason.
Instead, patch out the paths we don't need.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 30 Jan 2017 23:11:32 +0000 (23:11 +0000)]
distro/defaultsetup: Enable removal of libtool .la files by default
Relocation of native .la files during recipe specific sysroot relocation
is probably the final straw in just killing these files off.
Change things so this class is inherited by default. If distros don't want to
do this, they can opt out but it seems like the best thing to do now since
.la files aren't needed on Linux.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 30 Jan 2017 23:08:38 +0000 (23:08 +0000)]
relocatable: Make native .pc files relocatable
The native .pc files currently have hardcoded paths in them meaning each has
to be relocated at final install time. pkg-config has built in functionality
to avoid this, namely the pcfiledir variable.
This function translates .pc files to use the variable meaning further
relocation later is unnecessary.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 30 Jan 2017 23:08:11 +0000 (23:08 +0000)]
utils: Avoid need to relocate wrapper scripts
Whilst the path to the executable is dynamically determined, the passed in
environment variables or parameters are not relocatable and rely on the sstate
remapping code. In the recipe specific sysroot case this has become more costly.
This patch translates such paths into relocatable entries which means that
a sed replacement at final installation isn't needed.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patrick Ohly [Tue, 31 Jan 2017 12:50:33 +0000 (13:50 +0100)]
verify-bashisms: support warnings with more than one line of source code
All warnings start with "possible bashism in", followed by one or more
(in the case of line continuation) lines of source code. To support
more than one line, we now split by matching against the known intro
text.
Example:
$ verify-bashisms guile
...
/.../openembedded-core/meta/recipes-devtools/guile/guile_2.0.13.bb
possible bashism in guile_cross_config line 94 ($'...' should be "$(printf '...')"):
echo '#!'`which ${BUILD_SYS}-guile`$' \\\n--no-auto-compile -e main -s\n!#\n(define %guile-build-info '\'\( \
> ${B}/guile-config.cross
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patrick Ohly [Tue, 31 Jan 2017 12:50:31 +0000 (13:50 +0100)]
verify-bashisms: check scripts only once, include original file and line
Several scripts that are defined in .bbclass files end up in multiple
different recipes. It's better (faster, less repetitive error reports)
to check them only once.
In addition, the real information for the developer is where he can
find the script, not which recipe file uses it. verify-bashisms now
prints the original file instead of the recipe whenever possible
(i.e. 'filename' is set) and also bumps the line number so that it is
relative to the file and not the script.
Example with one real error and one added just for testing:
/.../openembedded-core/meta/classes/populate_sdk_ext.bbclass
possible bashism in install_tools line 515 (should be 'b = a'):
if [ "${SDK_INCLUDE_TOOLCHAIN}" == "1" -a ! -e $unfsd_path ] ; then
possible bashism in install_tools line 521 (type):
type fixme
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patrick Ohly [Tue, 31 Jan 2017 12:50:29 +0000 (13:50 +0100)]
verify-bashisms: fix problems with tinfoil2
tinfoil2 is based on a client/server architecture, which broke the
verify-bashisms script:
- The tinfoil instance and its data proxies can't be pickled, so
all interaction with the bitbake server has to run in the main
script process and only processing of the plain scripts can
be done with multiprocessing:
- The multiprocessing pool has to be created before initializing
tinfoil, otherwise the pool workers end up trying to communicate
with the bitbake server during shutdown:
ERROR: UI received SIGTERM
Process ForkPoolWorker-2:
Traceback (most recent call last):
File "/usr/lib/python3.4/multiprocessing/process.py", line 257, in _bootstrap
util._exit_function()
File "/usr/lib/python3.4/multiprocessing/util.py", line 286, in _exit_function
_run_finalizers(0)
...
File "/usr/lib/python3.4/multiprocessing/process.py", line 131, in is_alive
assert self._parent_pid == os.getpid(), 'can only test a child process'
AssertionError: can only test a child process
- func() needs to defined before creating the pool to avoid:
AttributeError: Can't get attribute 'func' on <module '__main__' from '/work/openembedded-core/scripts/verify-bashisms'>
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patrick Ohly [Tue, 31 Jan 2017 12:50:27 +0000 (13:50 +0100)]
verify-bashisms: point out where to get checkbashisms.pl
The current SourceForge project seems to be unmaintained (last release
2.0.0.2 from 2015) while the copy used by Debian is quite active (last
commit 2016-09-30).
Ideally, checkbashisms.pl should get installed automatically via a
recipe, but for now at least provide the link for manual installation.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Markus Lehtonen [Tue, 31 Jan 2017 13:23:30 +0000 (15:23 +0200)]
at-spi2-atk: depend on glib-2.0-native
Missing dependency revealed by recipe specific sysroots. If the host
system does not have glib-compile-schemas installed have (via
libglib2.0-dev, glib2, glib2-tools or similar) do_configure would fail
with:
configure: error: glib-compile-schemas not found.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Markus Lehtonen [Tue, 31 Jan 2017 13:23:28 +0000 (15:23 +0200)]
rpm: inherit pkgconfig
Rpm needs pkg-config in order to build successfully. Recipe specific
sysroots revealed this missing dependency when trying to build on a host
without pkg-config.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
core-image-tiny-initramfs: Fix error message shown after a successful initrd boot
When booting core-image-tiny-initramfs, since we want to live on initrd,
on purpose, we never find a rootfs image to switch root to,
this causes init to show an error as it would with other images,
this patch replaces the message shown to the user, avoiding confusion
when it was indeed a successful boot.
Yannick Gicquel [Wed, 25 Jan 2017 20:19:46 +0000 (21:19 +0100)]
ccache: update to 3.3.3
Release note available at this location:
https://ccache.samba.org/releasenotes.html#_ccache_3_3_3
Moving to tarball source as git.samba.org is not used anymore.
License checksum change is due to an update in URL, now refering to "https"
protocol instead of "http", line 32:
'https://ccache.samba.org/authors.html'
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh> Signed-off-by: Ross Burton <ross.burton@intel.com>
Juro Bystricky [Wed, 25 Jan 2017 20:54:57 +0000 (12:54 -0800)]
runqemu: allow bypassing of network setup
At present it is silently assumed all QEMU machines support networking.
As a consequence, one cannot run QEMUs without network emulation
using "runqemu".
This patch allows bypassing any network setup providing the qemuboot.conf
file contains:
qb_net = none
[YOCTO#10661]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Mariano Lopez [Wed, 25 Jan 2017 12:20:06 +0000 (12:20 +0000)]
testimage.bbclass: Allow to run tests on autobuilder's images
With the change to the new framework data store dependecy was
removed, instead a new file is generated and used in testimage.
When testing builds from the autobuilders the test data values
are from the autobuilder, including the paths.
Some tests require paths to current environment in order to run,
this commit will update such paths and fix the error of running
images donwloaded from autobuilders.
[YOCTO #10964]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Mariano Lopez [Wed, 25 Jan 2017 12:20:05 +0000 (12:20 +0000)]
runtime/cases/smart.py: Check for IMAGE_PKGTYPE instead of PACKAGE_CLASSES
smart test requires to build the image using rpm packages, this check was
included, but it checked for PACKAGE_CLASSES=='package_rpm', and this is
not true when building packages for rpm and deb/ipk. So this would check
IMAGE_PKGTYPE instead.
[YOCTO #10964]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Updates sanity tests to cope with minimal eSDK installer
1. Skips the validation of sanity if packagegroup-cross-canadian is in
host package.
2. Skips if SDK does not include toolchain at cases/devtool.py
This should fix [YOCTO #10794]
Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Kristian Amlie [Wed, 25 Jan 2017 14:46:15 +0000 (15:46 +0100)]
sstate: Make SSTATE_SCAN_CMD vars configurable using weak defaults.
For this we move them out of the python section so they can be
overridden on a per-recipe basis.
The motivation for this change is that not all tool chains need the
path modifications provided by the command, and these will provide
alternative or empty commands. The Go compiler is such an example.
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ed Bartosh [Wed, 25 Jan 2017 13:18:36 +0000 (15:18 +0200)]
toolchain-shar-extract: compare SDK and host gcc versions
If ext sdk is built by gcc version higher than host gcc version
and host gcc version is 4.8 or 4.9 the installation is known to
fail due to the way uninative sstate package is built.
It's a known issue and we don't have a way to fix it for above
mentioned combinations of build and host gcc versions.
Detected non-installable combinations of gcc versions and
print an installation error.
[YOCTO #10881]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ismo Puustinen [Wed, 25 Jan 2017 13:03:35 +0000 (15:03 +0200)]
bluez5: make readline support conditional.
Add readline support to PACKAGECONFIG. If readline needs if left out
of compilation, the bluez utilities which depend on readline are not
included in build or packages.
The defaults in PACKAGECONFIG are the same as before, so there should be
no change to current users.
Signed-off-by: Ismo Puustinen <ismo.puustinen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
