python3: Fixes several python3 dependency problems
This patch adds the packages python3-signal, python3-enum and python3-selectors,
while it also fixes python3-subprocess which in turn fix the installation of
python3-modules
Jussi Kukkonen [Thu, 8 Sep 2016 13:35:31 +0000 (16:35 +0300)]
tiff: Update download URL
remotesensing.org domain has been taken over by someone unrelated.
There does not seem to be an up-to-date tiff homepage, but
osgeo.org is a reliable download site.
pre-5.25.0 perl by default tries to link to an antiquated libnm (new
math) which is not used anymore since the early 1990's. After 2014
another libnm appeared for NetworkManager causing build failures.
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Bill Randle [Sat, 4 Jun 2016 22:45:03 +0000 (15:45 -0700)]
perl: fix several perl test failures
Several ExtUtils-MakeMaker tests fail when cross-compiled and run on
the target machine. Backport an upstream patch to fix the issues. Also
update the customized.dat hash file for the files modified by this patch
and other existing patches so the porting/customized.t test passes.
Bill Randle [Sat, 4 Jun 2016 22:45:01 +0000 (15:45 -0700)]
perl: set proper perl subversion number in config files
During the upgrade from Perl 5.22.0 to 5.22.1 in commit f4c9908eae1ae3dcc38877abe2d5fbeb46851dd4 the config.sh file was hand edited
to change the subversion numbers. However, the edit was not entirely
correct. As a result the Perl version test failed. Set the correct
version strings.
Sona Sarmadi [Wed, 14 Sep 2016 12:34:38 +0000 (14:34 +0200)]
dropbear: upgrade to 2016.72
The upgrade addresses CVE-2016-3116:
- Validate X11 forwarding input. Could allow bypass of
authorized_keys command= restrictions,
found by github.com/tintinweb.
Thanks for Damien Miller for a patch. CVE-2016-3116
When building busybox, an occasional error was observed.
The error is consistently the same:
libbb/appletlib.c:164:13: error: 'NUM_APPLETS' undeclared (first use in this function)
while (i < NUM_APPLETS) {
The reason is the include file where NUM_APPLETS is defined is not yet generated (or is being modified)
at the time libbb/appletlib.c is compiled.
The attached patchset fixes the problem by assuring libb is compiled as the last directory.
It is a busybox upstream known bug. When the busybox sed sub-command 'n'
hit the files EOF, it print an extra character that have been printed, but
the GNU sed would not print it.
In busybox source code ../editors/sed.c
------------------------------------------------------------------------
case 'n':
if (!G.be_quiet)
sed_puts(pattern_space, last_gets_char);
if (next_line) {
free(pattern_space);
pattern_space = next_line;
last_gets_char = next_gets_char;
next_line = get_next_line(&next_gets_char, &last_puts_char, last_gets_char);
substituted = 0;
linenum++;
break;
}
/* fall through */
/* Quit. End of script, end of input. */
case 'q':
/* Exit the outer while loop */
free(next_line);
next_line = NULL;
goto discard_commands;
------------------------------------------------------------------------
when read at the end of the file, the 'next_line' is null, it would go
"case 'q'" and goto discard_commands, the discard_commands would print
the old pattern space which have been printed.
So in order to comply with GNU sed, in case 'n', when the next_line is null
I add "else" at the end of the second "if": "goto again;" and send it to
the busybox upstream, the busybox maintainer adopt it and make a little
changes to the patch, we can see it at:
version 5.4.1 of rpm was not properly distclean before release, which
causes problems when cross-compiling.
The previous version this recipe called make distclean, but that would
trigger a call to ./configure which would fail when no gcc is
available and make the whole do_configure fail further down the line
This patch manually removes the files from the recipe.
Zhixiong Chi [Mon, 5 Sep 2016 04:08:13 +0000 (12:08 +0800)]
rpm: ensure rpm2cpio call rpm relocation code
We need to call rpmcliInit to ensure the rpm relocation code is called.
when we allow rpm2cpio to be relocatable, The adjusted path used to find
the macro files was being built into the binary and this path was valid
for the machine it was built on and some of our other build machines,
but invalid on some others, and was not being properly overridden at
runtime.
when we export the wrsdk and source the sdk, then execute rpm2cpio xxx.rpm|cpio -t.
we will get the following error :
"rpm-5.4.14/rpmdb/dbconfig.c:493:
db3New: Assertion `dbOpts != ((void *)0) && *dbOpts != '\0'' failed.
Robert Yang [Mon, 18 Jul 2016 03:32:41 +0000 (20:32 -0700)]
rpm: make --nosignature work
OE-core uses rpm's --nosignature, but it never worked:
self._invoke_smart('config --set rpm-check-signatures=false')
Now fix it with:
* Define SUPPORT_NOSIGNATURES to 1 in system.h
* !QVA_ISSET(qva->qva_flags, SIGNATURE) -> QVA_ISSET(qva->qva_flags, SIGNATURE),
otherwise, when use --nosignature would read database and verify
signature, this is not expected.
This can fix some race issues, for example, when more than one process
are querying rpm file with "rpm -qp --nosignature", they may hang up
because of race issues (the processes are trying to get RW/RD lock on
the database, but they shouldn't read the database at all since -qp and
--nosignature are used).
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Markus Lehtonen [Wed, 14 Sep 2016 08:46:06 +0000 (11:46 +0300)]
python-smartpm: use md5 as the digest for rpm_sys channel
Use md5 sum instead of mtime as the "digest" method for rpm_sys channel.
The digest is used to determine if the channel has been updated. It was
found out that mtime was not a reliable digest. On some systems mtime
of the rpm db does not get updated after every transaction if transactions
(smart install / remove commands) are fired in quick succession. As a
consequence smartpm cache and rpm db get out of sync.
RPMv5 has removed support for _RPMVSF_NOSIGNATURES,
the flag can be replaced with a flags set:
"RPMVSF_NODSAHEADER|RPMVSF_NORSAHEADER|RPMVSF_NODSA
RPMVSF_NORSA"
Thomas Witt [Mon, 22 Aug 2016 14:27:11 +0000 (16:27 +0200)]
cmake.bbclass: call cmake with a relative path
CMake wants a relative path for CMAKE_INSTALL_*DIR, an absolute path
breaks cross-compilation. This fact is documented in the following
ticket: https://cmake.org/Bug/view.php?id=14367
$sysconfdir and $localstatedir are not relative to $prefix, so they are
still set as absolute paths. With his change ${PROJECT}Targets.cmake
that are generated by cmakes "export" function will contain relative
paths instead of absolute ones.
Signed-off-by: Thomas Witt <Thomas.Witt@bmw.de> Signed-off-by: Clemens Lang <clemens.lang@bmw-carit.de> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Maxin B. John [Tue, 16 Aug 2016 11:12:03 +0000 (14:12 +0300)]
useradd_base: avoid unintended expansion for useradd parameters
Now, useradd dollar sign requires three prepending backslash characters to
avoid unintended expansion. It used to be just one prepending backslash
character before Krogoth. Restore that behaviour.
Signed-off-by: Niko Mauno <niko.mauno@vaisala.com> Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
binutils: advance SRCREV to obtain versioned symbols
Libraries needing versioned symbols, for example mysql, are not
supported by current version of binutils in krogoth.
When mysql library from MariaDB is compiled with the current
version of binutils we encounter errors at runtime as seen
below where php linked to mysql tries to run:
php: relocation error: php: symbol mysql_server_init, version
libmysqlclient_16 not defined in file libmysqlclient.so.18
with link time reference
Above error appears even though symbols exist in library:
245: 000000000001ecc0 0 FUNC GLOBAL DEFAULT 13 mysql_server_init@@libmysqlclient_16
279: 000000000001ecc0 297 FUNC GLOBAL DEFAULT 13 mysql_server_init@@libmysqlclient_18
The problem results from a bug in binutils that has already been
fixed upstream as well as on the 2.26 and 2.27 branches. We advance
the SRCREV on the 2.26 branch used in krogoth release to pick up the fix.
Details about bug: https://sourceware.org/bugzilla/show_bug.cgi?id=19698
Jeremy Puhlman [Mon, 1 Aug 2016 16:02:55 +0000 (09:02 -0700)]
bitbake.conf: set READELF for cross compilation
In the case of using an external toolchain that supports multilib
compilation with a single binary, TARGET_PREFIX is the same for both main
and multilib abis. Without READELF exported, python3 assumes it is
either the readelf for ${BUILD_SYS}-readelf. Exporting cross readelf
fixes the build issue.
checking LDLIBRARY... libpython$(LDVERSION).so
checking for i586-montavistamllib32-linux-ranlib...
x86_64-montavista-linux-ranlib
checking for i586-montavistamllib32-linux-ar...
x86_64-montavista-linux-ar
checking for i586-montavistamllib32-linux-readelf... no
checking for readelf... readelf
configure: WARNING: using cross tools not prefixed with host triplet
Jeremy Puhlman [Mon, 1 Aug 2016 16:02:54 +0000 (09:02 -0700)]
Fix random python backtrace in mutlilib handling code.
newval is not defined in all cases. Set to None and check if it is set.
File
"/local/foo/builds/x86/layers/openembedded-core/meta/classes/multilib_global.bbclass",
line 90, in preferred_ml_updates(d=<bb.data_smart.DataSmart object at
0xf6fd528c>):
if not d.getVar(newname, False):
> d.setVar(newname, localdata.expand(newval))
# Avoid future variable key expansion
UnboundLocalError: local variable 'newval' referenced before assignment
Jacob Kroon [Thu, 28 Jul 2016 10:56:06 +0000 (12:56 +0200)]
bitbake.conf/toolchain-scripts.bbclass: Remove debug prefix mappings in SDK
CFLAGS/CXXFLAGS in the SDK environment script adds debug-prefix mappings
that include staging area/work directories. Remove them since the SDK
shouldn't be aware of them.
initramfs-live-boot: Make sure we kill udev before switching root when live booting
When live booting, we need to make sure the running udev processes are killed
to avoid unexepected behavior, we do this just before switching root,
once we do, a new udev process will be spawned from init and will take care
of whatever work was still missing
Jackie Huang [Wed, 10 Aug 2016 03:19:44 +0000 (11:19 +0800)]
e2fsprogs: Fix missing check for permission denied.
If the path to "ROOT_SYSCONFDIR /mke2fs.conf" has a permission denied problem,
then the get_dirlist() call will return EACCES. But the code in profile_init
will treat that as a fatal error and all executions will fail with:
Couldn't init profile successfully (error: 13).
But the problem should not really be visible for the target package as the path
then will be "/etc/mke2fs.conf", and it is not likely that a user have no
permission to read /etc.
Yi Zhao [Wed, 10 Aug 2016 07:11:18 +0000 (15:11 +0800)]
tiff: Security fix CVE-2016-3186
CVE-2016-3186 libtiff: buffer overflow in the readextension function in
gif2tiff.c allows remote attackers to cause a denial of service via a
crafted GIF file
Richard Purdie [Fri, 19 Aug 2016 15:28:17 +0000 (16:28 +0100)]
busybox: Add parallel make fix
We're seeing regular parallel make failures in applet headers in busybox.
This adds a patch to try and avoid the issue, building upon a fix already
backported from upstream. The patch has been sent to upstream.
Stefan Agner [Mon, 8 Aug 2016 05:47:28 +0000 (22:47 -0700)]
busybox: Fix busybox-init on non-tty consoles
When using non-tty consoles (e.g. VirtIO console /dev/hvc0) the
current init system fails with:
process '/sbin/getty 115200 hvc0' (pid 545) exited. Scheduling for restart.
can't open /dev/ttyhvc0: No such file or directory
The first field needs to be a valid device. The BusyBox inittab example
explains as follows:
"<id>: WARNING: This field has a non-traditional meaning for BusyBox init!
The id field is used by BusyBox init to specify the controlling tty for
the specified process to run on. The contents of this field are
appended to "/dev/" and used as-is."
Signed-off-by: Henry Bruce <henry.bruce@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Tanu Kaskinen [Wed, 3 Aug 2016 20:41:31 +0000 (23:41 +0300)]
pulseaudio: fix crash when disconnecting bluetooth devices
[YOCTO #10018]
Add a patch that makes the bluetooth code create the HSP/HFP card
profile only once. The old behaviour of creating the profile twice
was not compatible with 0001-card-add-pa_card_profile.ports.patch.
This fix is not needed for master, because master doesn't any more
have 0001-card-add-pa_card_profile.ports.patch.
Stephano Cetola [Tue, 9 Aug 2016 11:48:36 +0000 (13:48 +0200)]
systemd: allow add users as a rootfs postprocess cmd
Adding all the users / groups to systemd is only available for readonly
file systems. This change allows users to add them to read / write file
systems as well by specifying:
python{3}-numpy: Predefine of sizeof off_t on mips/mipsel/ppc
Fixes below errors as seen on musl
| In file included from numpy/core/include/numpy/ndarraytypes.h:4:0,
| from numpy/core/include/numpy/ndarrayobject.h:18,
| from numpy/core/include/numpy/arrayobject.h:4,
| from numpy/core/src/multiarray/compiled_base.c:7:
| numpy/core/include/numpy/npy_common.h:167:10: error: #error Unsupported size for type off_t
| #error Unsupported size for type off_t
| ^~~~~
| In file included from numpy/core/include/numpy/ndarraytypes.h:4:0,
| from numpy/core/include/numpy/ndarrayobject.h:18,
| from numpy/core/include/numpy/arrayobject.h:4,
| from numpy/core/src/multiarray/compiled_base.c:7:
| numpy/core/include/numpy/npy_common.h:167:10: error: #error Unsupported size for type off_t
| #error Unsupported size for type off_t
| ^~~~~
python3: update manifest RDEPENDS for importlib and compression packages
zipfile.py has dependencies on importlib, threading, and shell
importlib has a dependency on lang
operator and contextlib added to the lang package instead of falling into misc
Fabio Berton [Tue, 23 Aug 2016 21:23:59 +0000 (18:23 -0300)]
python-3.5-manifest: Add argparse module
Adding argparse module from Python's standard library. This allow use
argparse without installing all python-misc modules. For compatibility,
add python3-argparse as RDEPENDS to python3-misc.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com>
(cherry picked from commit f2b96001e074d26f5eb8711c2217a695fb02de4c)
Tom Hochstein [Mon, 8 Aug 2016 15:45:16 +0000 (10:45 -0500)]
mesa-demos: Fix OpenGL ES configurability
The most recent patch 0011-drop-demos-dependant-on-obsolete-MESA_screen_surface.patch
incorrectly removed the configuration constructs that allowed the
package to be configured without OpenGL ES support.
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bobby Bingham (2):
remove or1k version of sem.h
remove obsolete gitignore rules
Rich Felker (4):
remove obsolete and unused gethostbyaddr implementation
fix asctime day/month names not to vary by locale
fix regression in tcsetattr on all mips archs
revert unrelated change that slipped into last commit
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Wed, 6 Jul 2016 09:54:29 +0000 (10:54 +0100)]
glibc: use the host locale archive in nativesdk builds
The nativesdk libc when used by buildtools has a hard requirement on supporting
a UTF-8 locale because Python 3 needs a UTF-8 locale. However we currently only
ship the C locale, which means that Python attempts to lookup the user's locale
(for example, en_NZ.UTF-8) in the locale archive under it's prefix it fails and
falls back to C. This the results in Python using ASCII instead of UTF-8 for
file encoding, and bitbake breaks.
Th obvious solution would be to ship all locales, but this would add
approximately 250MB to the size of the buildtools tarball (which is currently
around 30MB). Generating a binary locale archive reduces this down to 100MB,
but this is still a drastic increase in footprint. If we ship a subset of
locales in the tarball then there will be users whose locale isn't in the
tarball, and they'll have to change their locale to an "approved" one, which
isn't the best of messages to send to new users.
The alternative is to tell the nativesdk libc that the locale archive isn't
under it own prefix but is in fact at /usr/lib/locale/locale-archive, so the
buildtools libc uses the host locale archive. The locale archive format appears
to be at least fairly stable: our glibc 2.24 can read the locale archive
generated by glibc 2.17 (Centos 7).
[ YOCTO #9775 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Maxin B. John [Thu, 28 Jul 2016 13:38:27 +0000 (16:38 +0300)]
libproxy: use snapshot.debian.org for SRC_URI
Using ${DEBIAN_MIRROR} for SRC_URI doesn't work very well as that will
only contain releases that are currently in Debian.
So, move all of SRC_URI to the .bb so it can use snapshot.debian.org
instead, and set UPSTREAM_CHECK_URI to ${DEBIAN_MIRROR} so upstream
release checking continues to work.
[YOCTO #10040]
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Maxin B. John [Thu, 28 Jul 2016 13:02:55 +0000 (16:02 +0300)]
libaio: use snapshot.debian.org for SRC_URI
Using ${DEBIAN_MIRROR} for SRC_URI doesn't work very well as that will
only contain releases that are currently in Debian.
So, move all of SRC_URI to the .bb so it can use snapshot.debian.org
instead, and set UPSTREAM_CHECK_URI to ${DEBIAN_MIRROR} so upstream
release checking continues to work.
[YOCTO #10040]
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Maxin B. John [Thu, 28 Jul 2016 12:55:43 +0000 (15:55 +0300)]
blktool: use snapshot.debian.org for SRC_URI
Using ${DEBIAN_MIRROR} for SRC_URI doesn't work very well as that will
only contain releases that are currently in Debian.
So, move all of SRC_URI to the .bb so it can use snapshot.debian.org
instead, and set UPSTREAM_CHECK_URI to ${DEBIAN_MIRROR} so upstream
release checking continues to work.
[YOCTO #10040]
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Maxin B. John [Thu, 28 Jul 2016 12:46:51 +0000 (15:46 +0300)]
linuxdoc-tools: use snapshot.debian.org for SRC_URI
Using ${DEBIAN_MIRROR} for SRC_URI doesn't work very well as that will
only contain releases that are currently in Debian. So, move all of SRC_URI
to the .bb so it can use snapshot.debian.org instead, and set
UPSTREAM_CHECK_URI to ${DEBIAN_MIRROR} so upstream release checking continues
to work.
[YOCTO #10040]
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Maxin B. John [Thu, 28 Jul 2016 12:36:19 +0000 (15:36 +0300)]
docbook-xml-dtd4: use snapshot.debian.org for SRC_URI
Using ${DEBIAN_MIRROR} for SRC_URI doesn't work very well as that will
only contain releases that are currently in Debian. So, move all of SRC_URI
to the .bb so it can use snapshot.debian.org instead, and set
UPSTREAM_CHECK_URI to ${DEBIAN_MIRROR} so upstream release checking continues
to work.
[YOCTO #10040]
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Maxin B. John [Thu, 28 Jul 2016 12:24:21 +0000 (15:24 +0300)]
netbase: use snapshot.debian.org for SRC_URI
Using ${DEBIAN_MIRROR} for SRC_URI doesn't work very well as that will
only contain releases that are currently in Debian. So, move all of SRC_URI
to the .bb so it can use snapshot.debian.org instead, and set
UPSTREAM_CHECK_URI to ${DEBIAN_MIRROR} so upstream release checking continues
to work.
[YOCTO #10040]
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Maxin B. John [Thu, 28 Jul 2016 12:15:13 +0000 (15:15 +0300)]
serf: use snapshot.debian.org for SRC_URI
Using ${DEBIAN_MIRROR} for SRC_URI doesn't work very well as that will
only contain releases that are currently in Debian. So, move all of SRC_URI
to the .bb so it can use snapshot.debian.org instead, and set
UPSTREAM_CHECK_URI to ${DEBIAN_MIRROR} so upstream release checking continues
to work.
[YOCTO #10040]
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Maxin B. John [Thu, 28 Jul 2016 13:11:40 +0000 (16:11 +0300)]
mailx: use snapshot.debian.org for SRC_URI
Using ${DEBIAN_MIRROR} for SRC_URI doesn't work very well as that will
only contain releases that are currently in Debian.
So, move all of SRC_URI to the .bb so it can use snapshot.debian.org
instead, and set UPSTREAM_CHECK_URI to ${DEBIAN_MIRROR} so upstream
release checking continues to work.
[YOCTO #10040]
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Maxin B. John [Thu, 28 Jul 2016 12:03:44 +0000 (15:03 +0300)]
ossp-uuid: use snapshot.debian.org for SRC_URI
Using ${DEBIAN_MIRROR} for SRC_URI doesn't work very well as that will
only contain releases that are currently in Debian. So, move all of SRC_URI
to the .bb so it can use snapshot.debian.org instead, and set
UPSTREAM_CHECK_URI to ${DEBIAN_MIRROR} so upstream release checking continues
to work.
[YOCTO #10040]
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Maxin B. John [Fri, 29 Jul 2016 13:28:45 +0000 (16:28 +0300)]
apmd: use snapshot.debian.org for SRC_URI
Using ${DEBIAN_MIRROR} for SRC_URI doesn't work very well as that will
only contain releases that are currently in Debian.
So, move all of SRC_URI to the .bb so it can use snapshot.debian.org
instead, and set UPSTREAM_CHECK_URI to ${DEBIAN_MIRROR} so upstream
release checking continues to work.
v2:
use ${BPN} instead of ${PN} in SRC_URI for multilib builds
[YOCTO #10040]
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Tim Orling [Wed, 27 Jul 2016 18:04:36 +0000 (11:04 -0700)]
at: use snapshot.debian.org for SRC_URI
[YOCTO #10005] Krogoth-next checkuri failures
Using ${DEBIAN_MIRROR} for SRC_URI doesn't work very well as that will only
contain releases that are currently in Debian, so currently doesn't contain
3.1.18 as unstable has moved on to 3.1.20.
So, move all of SRC_URI to the .bb so it can use snapshot.debian.org instead,
and set UPSTREAM_CHECK_URI to ${DEBIAN_MIRROR} so upstream release checking
continues to work.
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Using ${DEBIAN_MIRROR} for SRC_URI doesn't work very well as that will only contain releases that are currently in Debian, so currently doesn't contain 1.18.4 as unstable has moved on to 1.18.9.
So, move all of SRC_URI to the .bb so it can use snapshot.debian.org instead, and set UPSTREAM_CHECK_URI to ${DEBIAN_MIRROR} so upstream release checking continues to work.
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
The Egyptian government changed its mind on short notice, and
Africa/Cairo will not introduce DST starting 2016-07-07 after all.
(Thanks to Mina Samuel.)
Asia/Novosibirsk switches from +06 to +07 on 2016-07-24 at 02:00.
(Thanks to Stepan Golosunov.)
Changes to past and future time stamps
Asia/Novokuznetsk and Asia/Novosibirsk now use numeric time zone
abbreviations instead of invented ones.
Changes affecting past time stamps
Europe/Minsk's 1992-03-29 spring-forward transition was at 02:00 not 00:00.
(Thanks to Stepan Golosunov.)
Daniel McGregor [Fri, 15 Jul 2016 01:49:38 +0000 (18:49 -0700)]
openjade-native: work around bug exposed by GCC 6
Simply turn off the optimzation that is causing this breakage. I had
originally used -fno-lifetime-dse, but -fno-tree-dse works at least
going back as far as gcc 4.8.
This isn't a real fix, but it allows openjade to work enough to complete
a build.
