Bruce Ashfield [Mon, 17 Jan 2011 21:34:58 +0000 (16:34 -0500)]
linux-yocto: update validate_branches to detected invalid commit IDs
The previous implementation of invalid commit ID checks would
error early when a bad object was detected. Rather than changing
to set +e for the entire routine, we'll capture the output and
do an explicit check for a bad object and throw a useful error
message when it is detected.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Fri, 14 Jan 2011 05:33:26 +0000 (00:33 -0500)]
linux-yocto: streamline new BSP creation
By setting BOOTSTRAP to the branch that should be used for a
currently undefined BSP a build can be completed and an
environment for streamlining the BSP created.
With the appropriate machine.conf, and a defconfig any MACHINE
can be built against and inherit the configuration of the
standard yocto kernel.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Tue, 11 Jan 2011 18:30:08 +0000 (13:30 -0500)]
linux-yocto: beagleboard enablement
Enable beagleboard support for 2.6.37. The only non-kernel related
change for the board is to update the serial console designation.
The Beagleboard use omap serial driver, so we replace ttyS2 with ttyO2.
This is described in following link:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg40838.html
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Liming Wang <liming.wang@windriver.com>
Scott Rifenbark [Fri, 14 Jan 2011 19:10:04 +0000 (11:10 -0800)]
documentation/yocto-project-qs: Updated the Packages section.
Added the packages autoconf and automake to both the Debeian-based
host and the RPM-based host example commands. During a fresh
development host system test run I found these packages were
necessary to develop Yocto projects using Eclipse IDE.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Yu Ke [Fri, 14 Jan 2011 09:05:33 +0000 (17:05 +0800)]
mesa: add mesa 7.8.2
The latest mesa 7.10 has dependency on GPLv3 library talloc, so it is still necessary to keep one old non-GPLv3 mesa.And the latest non-GPLv3 version is mesa 7.8.2, so this patch add it.
Yu Ke [Fri, 14 Jan 2011 08:39:59 +0000 (16:39 +0800)]
mesa: upgrade to mesa 7.10
- add SRC_URI checksum
- remove the DEFAULT_PREFERENCE for atom_pc, since mesa 7.10 has dependency on GPLv3 talloc. the latest non-GPLv3 one is mesa 7.8.2, atom_pc can use that vesion.
Yu Ke [Fri, 14 Jan 2011 06:47:07 +0000 (14:47 +0800)]
xf86-input-synaptics: upgrade to 1.3.0
- update license checksum due to commit "COPYING: add three missing authors listed in synaptics.c". the license type is unchanged.
- Pass correct "sdkdir" value for cross compiling
Yu Ke [Fri, 14 Jan 2011 04:00:06 +0000 (12:00 +0800)]
xdpyinfo: upgrade to 1.2.0
- update license checksume due to the commit "COPYING: replace stub with actual copyright notice". it provide more accurate license info. the license type is unchanged.
Yu Ke [Fri, 14 Jan 2011 03:32:59 +0000 (11:32 +0800)]
xprop: upgrade to 1.2.0
- LICENSE_CHECKSUM changed due to the commit "COPYING: replace stub with copyright notices". this commit add more accurate license info, and the license type is still MIT-X.
Dongxiao Xu [Tue, 18 Jan 2011 08:18:18 +0000 (16:18 +0800)]
bitbake: Introduce stamp-extra-info task flag into stamp filenames
For certain tasks, we need additional information in build stamp file
other than the task name and file name. stamp-extra-info is introduced as
a task flag which is appended to the stamp file name.
[Code simplifcations/tweaks from Richard]
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Tue, 18 Jan 2011 00:12:38 +0000 (22:12 -0200)]
poky-init-build-env: unset BBPATH
When using OpenEmbedded and Yocto I had it previously set to OE and
this made bitbake to get confused. This was difficult to figure out
and then it seems safer and cleaner if the script unset it to avoid
this confusing behaviour.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dexuan Cui [Sat, 15 Jan 2011 10:50:14 +0000 (18:50 +0800)]
libc-package.bbclass: should not rm scsi/*.h
{e}glibc should install the scsi/*.h files, which are needed by hal.
Currently hal can build because eglibc-initial (which has its own do_install)
installs the files. In future eglibc will have its own sysroot, so hal
won't build.
BTW: in OE side, eglibc's do_install also doesn't remove the files.
Dexuan Cui [Sat, 15 Jan 2011 10:47:50 +0000 (18:47 +0800)]
libgcc: use the new recipe (rather than gcc-runtime) to install libgcc_s.so* and crt*.o
Currently gcc-runtime installs the files, but actually gcc-runtime's
do_configure checks if the files are available, so before we build gcc-runtime,
we should have some recipe install the files first! -- currently
gcc-cross-intermediate actually does that(gcc-cross also installs the files,
but it installs into the gcc-build-internal* directory), but
gcc-cross-intermediate will have its own sysroot in future, after that,
gcc-runtime won't build. So let us add this new target recipe and move the
installation of the files from gcc-runtime into it.
Bruce Ashfield [Mon, 17 Jan 2011 18:14:46 +0000 (13:14 -0500)]
linux-yocto: enable arch ARM config settings for KARCH based boards
The switch to KARCH meant that the arch arm settings were not
being applied to all boards. This commit adds the new option
along with the existing one to cover all boards.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Fri, 14 Jan 2011 05:41:40 +0000 (00:41 -0500)]
linux-yocto-stable: add atom-pc preempt_rt support
Updating the SRCREV to capture this commit to the 2.6.34 kernel:
linux-2.6-windriver: atom-pc-preempt_rt meta-data
The following patch adds support for the preempt_rt kernel type
for the atom-pc machine. It should be applied to the wrs_meta
branch.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Bruce Ashfield <bruce.ashfield@windriver.com> CC: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Tom Zanussi [Fri, 14 Jan 2011 22:33:05 +0000 (16:33 -0600)]
linux-yocto: hard-code NO_LIBPERL/NO_LIBPYTHON
ExtUtils::Embed ccopts is getting the host's -I/usr/local/include and
using it to compile perf, which results in a compilation error that
started appearing just recently.
This turns the code that makes use of ExtUtils::Embed off and simply
hard-codes NO_LIBPERL.
It does the same for LIBPYTHON while we're at it, since it probably
suffers from a similar underlying problem and just by chance hasn't
broken anything yet.
This will be re-enabled after I familiarize myself with the perf
recipe and am able to create a proper fix.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Jiajun Xu [Thu, 13 Jan 2011 01:46:14 +0000 (09:46 +0800)]
qemuimagetest: Use the same image in sanity testing to fix the timeout issue on autobuilder
Fixes [BUGID #595]
Because of the QEMU booting slowness issue(see bug #646 and #618), autobuilder
may suffer a timeout issue when running sanity test. We introduce variable
SHARE_IMAGE here to fix the issue. It is by default set to 1. Poky will copy
latest built-out image and keep using it in sanity testing. If it is set to 0,
latest built-out image will be copied and tested for each case, which will take
much time.
Richard Purdie [Wed, 12 Jan 2011 16:00:57 +0000 (16:00 +0000)]
bitbake.conf: Whitelist MACHINE variable in PACKAGE_ARCHS
PACKAGE_ARCHS represents all compatible architectures for a given machine.
It makes no sense for this variable to change any task checksums as it doesn't
inject any machine dependency into any known task. Multimachine means machine
specific packages will be detected through other variables.
Before this patch, even native packaging tasks were ending up being marked as
machine specific.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Even when a variable was whitelisted, any dependencies of that variable
could still creep into the task hash due to the way the whitelisting
code worked. This patch changes thing to ensure that when whitelisted,
that whitelisting applies to the variable and any dependencies it has.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joshua Lock [Mon, 10 Jan 2011 14:37:03 +0000 (14:37 +0000)]
bitbake/goggle: closing the progress dialog kills the UI
It's unlikely that someone wants to close the progress dialog
yet leave the UI (and BitBake process) running, so hook up
the progress dialogs delete-event to exit gtk.
Joshua Lock [Wed, 5 Jan 2011 19:23:46 +0000 (19:23 +0000)]
bitbake/uievent: fix queueing of events for xmlrpc before UI has loaded
The recent change to Queue up events before the UI is spawned (in 26eda933379801ef1c8b4b09e67d14f498cd3813) broke the xmlrpc server because the
uievent implementation of BBUIEventQueue expects pickled strings for its
queue_event() method.
This is because the RPC exposed event.send() method must accept pickled
strings, but for xmlrpc event.send() is just mapped to queue_event().
Work around this by adding a send_event method which unpickles strings and
hands them off to queue_event() which can then be used for the remapping.
Koen Kooi [Fri, 7 Jan 2011 16:36:04 +0000 (17:36 +0100)]
wpa-supplicant 0.7: fix GNU HASH QA issue
The recipe was unsetting LDFLAGS, resulting in:
NOTE: QA Issue: No GNU_HASH in the elf binary: '/OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/wpa-supplicant-0.7.3-r0/packages-split/wpa-supplicant/usr/sbin/wpa_supplicant'
Darren Hart [Tue, 11 Jan 2011 23:29:58 +0000 (15:29 -0800)]
bbvars.py: add a script to look for undocumented variables
bbvars.py will compare recipes in meta directories with documentation files
and report on variables that don't appear to be documented. It reports the
number of times a variable is used as well as any doctags present in the
documentation config file.
The output of this is intended to aid in determining where documentation may
be lacking, but it is not perfect, and does generate some false positives. An
experienced eye and careful attention to count and doctag should be applied to
the results.
$ ./bbvars.py -d ../../documentation/poky-ref-manual/poky-ref-manual.html -m ../../meta -t ../../meta/conf/documentation.conf -T | head -n 10
Found 1413 undocumented bb variables (out of 1578):
VARIABLE COUNT DOCTAG
===================================================
BUILD_ARCH 4 The name of the building architecture. E.g. i686.
BUILD_CC_ARCH 2 FIXME
BUILD_PREFIX 4 FIXME
BUILD_SYS 13 FIXME
BUILD_VENDOR 2 FIXME
CACHE 1 The directory holding the cache of the metadata.
COMPATIBLE_HOST 19 A regular expression which matches the HOST_SYS names supported by the package/file. Failure to match will cause the file to be skipped by the parser.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Richard Purdie <richard.purdie@linuxfoundation.org>
Liping Ke [Tue, 4 Jan 2011 07:21:40 +0000 (23:21 -0800)]
adt-intaller feature implementation, including the bitbake recipe file for creating the intaller tar file under /tmp/deploy/sdk, and the adt-installer script files and config files, set the reference to adt repo entry empty before it's setup
Bruce Ashfield [Tue, 11 Jan 2011 18:08:29 +0000 (13:08 -0500)]
linux-yocto: add routerstation pro and mpc8315e-rdb support
The routerstation pro and mpc8315e-rdb have been validated
on 2.6.37 so we can switch their preference to linux-yocto
and update the machine compatibility to add them to the support
list.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Darren Hart [Tue, 11 Jan 2011 20:38:11 +0000 (12:38 -0800)]
trace-cmd: Bump SRCREV and recipe PV and PR values.
Upgrade to 6c696cec3f264a9399241b6e648f58bc97117d49 which
includes fixes to the Makefile to allow for user override of
CC and AR via the environment as well as python SWIG wrapper
fixes.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Bruce Ashfield <bruce.ashfield@windriver.com> CC: Tom Zanussi <tom.zanussi@intel.com>
Nitin A Kamble [Wed, 5 Jan 2011 18:14:18 +0000 (10:14 -0800)]
libxml-simple-perl: fix build failure with perl 5.12.2
for hostperl needing to load .so files (for module scalar::util) the host/native
perl library path is placed 1st in the @INC with the -I parameter to perl.
Otherwise hostperl gives error can not load module scalar::util.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Wed, 5 Jan 2011 18:03:27 +0000 (10:03 -0800)]
cpan.bbclass: add a new parameter EXTRA_PERLFLAGS
We use host perl while building target perl modules. When some of the
prebuilt perl modules such as scalar::util are used in the build process
directly or indirectly, perl needs to load the arch specific .so library
file. If perl can not find the .so library files, then perl
tries to use the target pm files which ends up in circular perl module
depedancy causing build time perl invocation to fail.
Adding this new parameter viz EXTRA_PERLFLAGS to cpan.bbclass allows perl
module recipes to specify the location of such host .so files for hostperl,
so that build time invocation of perl does not fail.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Thu, 30 Dec 2010 20:27:54 +0000 (12:27 -0800)]
cpan.bbclass: use LIBDIR instead of DATADIR
perl 5.12.2 does not use /usr/share/perl path, and all that stuff goes
in /usr/lib/perl. This commit fixes cpan class which depends on
/usr/share/perl.
cpan.base/build.bbclass: change /usr/lib/perl5 to /usr/lib/perl
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Wed, 22 Dec 2010 17:26:07 +0000 (09:26 -0800)]
perl, perl-native: upgrade from 5.8.8 to 5.12.2
Deleted these patches as they are part of the upstream code now.
deleted: files/perl-5.8.8-gcc-4.2.patch
deleted: perl-5.12.2/makedepend-dash.patch
deleted: perl-5.12.2/native-no-gdbminc.patch
deleted: perl-5.12.2/54_debian_perldoc-r.patch
And rebased these patches to the newer source code
modified: files/letgcc-find-errno.patch
modified: perl-5.12.2/Makefile.patch
modified: perl-5.12.2/asm-pageh-fix.patch
modified: perl-5.12.2/native-nopacklist.patch
modified: perl-5.12.2/native-perlinc.patch
modified: perl-5.12.2/Makefile.SH.patch
modified: perl-5.12.2/installperl.patch
modified: perl-5.12.2/perl-dynloader.patch
modified: perl-5.12.2/09_fix_installperl.patch
get patches from debian perl ver 5.12.2-2
the fakeroot.diff patch from debian is conflicting with our
Makefile.SH.patch, hence disabling the fakeroot patch
use newly created config files
Created with current milestone branch on qemu machines
modified: config.sh
modified: config.sh-32
modified: config.sh-64
get some changes from oe's perl 5.10.1 recipe
fix the Makefile.SH.patch use miniperl instead of perl
import a OE 5.10.1 patch: uudmap_cross
fix install issues
add /usr in the destdir, so that perl gets installed in
/usr/bin/perl and not in /bin/perl
link /usr/lib/perl to /usr/lib/perl5 so that operations with
/usr/lib/perl path in them keep on working.
Fix/Improve perl packaging
avoid perl-module-module-* kind of packages
recreate perl-rdepends_5.12.2.inc file with new set of packages
import from oe perl-rprovide_5.12.2.inc
combine all unicore perl scripts in one package
simplify perl-lib
reduce no of perl recipe packages greatly.
Add zlib to depedancy
fix buildtime host contamination
This also fixes [BUGID #384]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Chris Larson [Mon, 10 Jan 2011 16:20:50 +0000 (09:20 -0700)]
Inject taskpid into log records via our log handler
It turns out that while log filters added with addFilter are only associated
with that logger, and not its children, handlers are inherited, and handlers
can be filters. So, let's add filtering to our existing LogHandler class
which dispatches our log records as bitbake events.
Bruce Ashfield [Mon, 10 Jan 2011 17:10:37 +0000 (12:10 -0500)]
linux-yocto: update to 2.6.37
Fixes [BUGID: 620]
Update the SRCREVs to include the full 2.6.37 release plus the
forward port of the alternate RPC port patch. With this fix,
we can complete usermode NFS booting of all the qemu* targets.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Wed, 5 Jan 2011 16:02:35 +0000 (11:02 -0500)]
kern-tools: create generic variables for platform/board/kernel
Update the SRCREV to pickup changes to update the use of
WRS_* to be K* to provide more generic names for the
platform/board/kernel configuration options.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Tue, 4 Jan 2011 21:39:03 +0000 (16:39 -0500)]
linux-yocto: update SRCREV to pickup debug/ftrace config changes
Updating to reflect the changes from Darren Hart:
[
linux-yocto-2.6.37: Add debugfs and ftrace features to standard ktype meta-data
ftrace provides low impact tracing facilities and should be made
available on the main kernel - as opposed to a debug or tracing
kernel which often add enough overhead to mask subtle bugs.
These features are available on the 2.6.34 yocto kernel.
Boot and trace-cmd tested on qemux86-64.
Signed-off-by: Darren Hart <darren@dvhart.com> CC: Bruce Ashfield <bruce.ashfield@windriver.com> CC: Tom Zanussi <tom.zanussi@intel.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Tue, 4 Jan 2011 19:47:46 +0000 (14:47 -0500)]
routerstation: disable command line overrides
Fixes [BUGID #581]
The initial routerstation pro BSP went out with with command line
overrides enabled. We'd need to be able to set the command line
from Redbot, so we should disable the forcing of the built in
variant.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Tue, 4 Jan 2011 05:20:14 +0000 (00:20 -0500)]
kernel-yocto: pass the build directory to configme
configme used to be able to calculate the output/build directory
when branches were always <machine>-<kernel type>. Branch names
can now be widely different and to avoid embedding complexity
in the scripts it is easier to just pass ${B} from the build system
down to the scripts.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Yu Ke [Mon, 27 Dec 2010 08:20:34 +0000 (16:20 +0800)]
Fetcher: only set __BB_DONT_CACHE when SRCREV = "${AUTOREV}"
we should cache SRCREV whenever possible, the only exception is
when SREREV is auto rev. so change the logic to only set __BB_DONT_CACHE
at SRCREV = "${AUTOREV}" case
Yu Ke [Mon, 27 Dec 2010 01:31:38 +0000 (09:31 +0800)]
Fetcher: break the "SRCREVINACTION" deadlock
Current fetcher has annoying "SRCREVINACTION" deadlock,
which occurs when SRCREV=${AUTOREV}=@bb.fetch.get_srcrev():
get_srcrev()->setup_localpath()->srcrev_internal_helper()
->evaluate SRCREV->get_srcrev()
current fetcher resolve the deadlock by introducing a
"SRCREVINACTION" condition check. Althoguh it works, it is
indeed not clean.
This patch use antoehr idea to break the deadlock: break
the dependency among SRCREV and get_srcrev(), i.e. assign
a specific keyword "AUTOINC" to AUTOREV. when Fetcher meet
this keyword, it will check and set the latest revision to
urldata.revision. get_srcrev later can use the urldata.revision
for value evaluation(SRCPV etc). In this case, SRCREV no longer
depends on get_srcrev, and there is not deadlock anymore.
