Changes to split live into iso and hddimg without
adding a new image type class.
This patch has only a visible effect on HOB and solves
part 2 of #3197
[YOCTO #3197]
Signed-off-by: Valentin Popa <valentin.popa@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 8 Oct 2013 21:12:54 +0000 (17:12 -0400)]
kernel: restore scripts in the sysroot
When building against the sysroot, out of tree modules can require modpost
and other utilities normally found in the kernel's scripts directory. For
the kernel source in the staging dir, these scripts have been removed to
avoid mixing archiectures when packaging kernel-dev (among other things).
Rather than further complicate the kernel's install rule, or its packaging,
we can restore the scripts by building them in the kernel staging directory
after the sstate is installed, making them available to packages that need them.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
update-rc: Stop and remove service if updating package
Since when updating packages packages managers do not remove the previous package,
it just replaces new files and run pre/post install scripts. This causes not
to update update-rc scripts if they were changed.
This patch is useful in case the newer package version updated the update-rc
script.
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jonathan Liu [Wed, 9 Oct 2013 13:21:46 +0000 (13:21 +0000)]
qt4: add upstream QTBUG-31579 patch for QPainter regression
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 8 Oct 2013 11:23:32 +0000 (11:23 +0000)]
xorg-lib-common: fix malloc0returnsnull usage
Xorg libraries that use Xmalloc need to know if malloc(0) returns NULL or not,
and as this is a runtime test it can't be checked for. Previously
xorg-lib-common declared that malloc(0) did return NULL, but this isn't true for
eglibc (only uclibc).
Instead, use libc-specific overrides to pass the relevant option.
(ideally the check would use the autoconf cache so this can be stored in the site files)
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sysvinit-inittab: Fix getting tty device name from SERIAL_CONSOLES entries
Currently the part after "tty" in the device name go into label along with
everything after that part. For example if SERIAL_CONSOLES="115200;vt100;ttyS0"
than label=S0 but if SERIAL_CONSOLES="115200;ttyS0;vt100" than label=S0;vt100.
If SERIAL_CONSOLES="..;ttyX;..", part after 'X' should also be trimmed.
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Sun, 6 Oct 2013 13:01:33 +0000 (15:01 +0200)]
bitbake.conf: Remove double slash from PATH_prepend and PKG_CONFIG_DIR
* we correctly have
${STAGING_DIR_NATIVE}${base_sbindir_native}
and then double slash in
${STAGING_DIR_NATIVE}/${base_bindir_native}
* similar in PKG_CONFIG_DIR where libdir also starts with slash
${STAGING_DIR_HOST}/${libdir}/pkgconfig
* also fix double slash in insane.bbclass and staging.bbclass
* I was a bit nervous about staging change (in case the / was important
in some weird use-case, but the extra slash is there since following
commit where other extra slashes were removed only the one before
libdir was kept:
autotools.bbclass: Separate out useful staging functions into
base.bbclass and call from autotools classes
* this isn't fixing any real-world issue AFAIK, I was just trying to
debug one weird case where debugedit fails with
canonicalization unexpectedly shrank by one character
and it's easier to grep for '//' without many harmless instances
already in run* scripts etc
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Wed, 9 Oct 2013 09:57:35 +0000 (09:57 +0000)]
device_table-minimal.txt: change group of /dev/hda back to disk
The group for /dev/hda should be disk instead of root.
The group ID for /dev/hda was 6, but it was modified to be root by
accident in the following commit.
It is uncommon, but it is possible for upstream sources to contain files
that have wildcard characters in their names (Webmin is an example).
Because we were running glob.glob() on every entry in the list of
entries in FILES and then adding the result to the files list to be
processed, the process would loop infinitely if files whose names
contained wildcard characters were present. Fix this by avoiding
re-processing the output of glob.glob() with itself, and also "escape"
wildcard characters in FILES entries added automatically from
do_split_packages().
Fixes [YOCTO #1676].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Fri, 11 Oct 2013 15:59:35 +0000 (12:59 -0300)]
uboot-config.bbclass: Raise an error for unknown configs
When passing the wrong value for UBOOT_CONFIG it ought to raise an
error otherwise it is quite difficult for user to notice it didn't
behave as expected.
Reported-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 7 Oct 2013 11:20:07 +0000 (11:20 +0000)]
utils.bbclass: Fix override ordering for FILESPATH
Currently the overrides are being applied backwards. This means something which is
platform specific is overriding something which is machine specific which
is clearly not intended.
This patch corrects the ordering to match the normal expected behaviour of
OVERRIDES.
Secondly, all overrides are being searched for each path in turn. What should
really happen is that we should look for the highest priority override (e.g. distro
or machine) in each layer, then move on to platform/tune (e.g. armv7a) and
then to arch (e.g. arm). This patch therefore also reverses the for loops
to achieve this behaviour and give the result the user would expect.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 7 Oct 2013 11:42:46 +0000 (11:42 +0000)]
alsa-state: Rename init script
Having a SRC_URI called ${PN} is asking for trouble. When extending FILESPATH,
alsa-state can be treated as a directory and copied over the contents of ${WORKDIR}
which is invariably not what the user wants.
Avoid this by renaming the SRC_URI to something else and only call
it alsa-state at install time.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Mon, 7 Oct 2013 15:15:16 +0000 (12:15 -0300)]
uboot-config.bbclass: Fix use without IMAGE_FSTYPES appending
Before checking if the image is a valid value, we need to check if the
list of items is big enough or we will raise an exception.
Reported-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eric Bénard [Sat, 5 Oct 2013 10:11:19 +0000 (12:11 +0200)]
qemu: fix nativesdk build without x11
when x11 is not defined in DISTRO_FEATURES, there are no x11 headers
so True is not defined leading to :
| ui/sdl.c:62:8: warning: type defaults to 'int' in declaration of 'doing_grabs' [-Wimplicit-int]
| static doing_grabs = True;
| ^
| ui/sdl.c:62:22: error: 'True' undeclared here (not in a function)
| static doing_grabs = True;
| ^
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 6 Oct 2013 08:37:40 +0000 (08:37 +0000)]
python: Ensure build completes before install
At the start of install, python swizzles the makefiles around, leading
to chunks of do_compile running again. These race against the install
target, leading to errors if pieces are being recompiled whilst others
are being installed.
For now, workaround this by running the compile target with the new
makefile, then running install ensuring a parallel make race doesn't
happen.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Fri, 4 Oct 2013 15:48:19 +0000 (15:48 +0000)]
run-postinst: Ensure that the postinsts are ordered
The postinst files were being generated using purely the name of the package,
this unfortunately meant the run order would be based on the name of the
package and not the order in which it was installed on the filesystem.
If package A requires package Z to be fully installed, this causes a problem.
Note:
rpm - as the rpm based install proceeds the order is defined and captured.
so the problem is resolved there.
ipk - this unfortunately does not appear to solve the problem for ipk, as
the status file is not ordered in any appreciable way. This does not
cause any regressions however and sets the stage for a proper fix.
deb - this -may- fix the deb install. Early testing indicates at least some
ordering to the status file. But it's unclear if it completely resolves
the issue.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Thu, 3 Oct 2013 20:48:45 +0000 (20:48 +0000)]
package_rpm.bbclass: Workaround failure in attemptonly installs
[YOCTO #5313]
When performing an attemptonly install, we should skip an errors and
continue to install everything else. However, there is a case where two
packages can conflict, and cause a hard failure.
This workaround, ignores this and allows the image to be constructed.
Note: Some items in the failed transaction may not get installed.
To fix this properly we need to find the issue in smart, and make it ignore
or at least attempt to resolve these kinds of conflicts.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga [Fri, 4 Oct 2013 12:33:05 +0000 (15:33 +0300)]
connman-conf: add a global public DNS to network provisioning
In case of QEMU machines, a global public DNS is provisioned,
as the network is not configured via DHCP.
Google's public global DNS server 8.8.8.8 is used.
Partial fix for [YOCTO #4587] (qemu machines case).
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 4 Oct 2013 13:14:10 +0000 (14:14 +0100)]
oe-init-build-env: unset BBSERVER
If BBSERVER is set, we should unset it before proceeding. Its assumed the
user will have unloaded the server from memory should they have wished
to do so.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 4 Oct 2013 11:29:08 +0000 (12:29 +0100)]
udpated-rc.d: Track postinst/prerm/postrm in task checksum
When these functions change, the package should rebuild but currently it
does not. We need to add the dependencies manually as the dependency
code can't track dynamically created variables.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 4 Oct 2013 11:28:23 +0000 (12:28 +0100)]
systemd: Track postinst/prerm in task checksum
When these functions change, the package should rebuild but currently it
does not. We need to add the dependencies manually as the dependency
code can't track dynamically created variables.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd-compat-units: Use correct run-postinsts script link
OE-Core commit 75a14923da1ba91eddde47f0907345c19c82d6f0 has moved
run-postinsts script execution from S98 to S99 in rcS.d. run-postinsts.service
should check for this script and run it on first boot rather than
S98run-postinsts, which is for opkg/dpkg.
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tudor Florea [Tue, 1 Oct 2013 22:54:40 +0000 (22:54 +0000)]
kmod: ptest fixes
Make kmod-ptest able to compile with separated source and
build dir. Since kmod test files contain kernel modules for
many different architectures, strip and arch gets confused
and throws errors.
Signed-off-by: Tudor Florea <tudor.florea@enea.com> Signed-off-by: Björn Stenberg <bjst@enea.com> Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Wed, 2 Oct 2013 19:15:26 +0000 (19:15 +0000)]
linux-yocto: enable CONFIG_INPUT_EVDEV as standard policy
We have a number (in fact most) BSPs that require INPUT_EVDEV for basic
functionality. The size increase is minimal, so we'll add it to the
standard configuration for all platforms.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some packages may return error while running opkg-cl configure, during
first boot. This will fail 'ExecStart' and 'ExecStartPost' will not run.
Without 'ExecStartPost' opkg-configure service will continue to run on
successive boot attempts. 'ExecStartPost' should disable this service
after first boot irrespective of 'ExecStart' status.
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 2 Oct 2013 13:09:50 +0000 (13:09 +0000)]
cross-canadian: Fix TUNE_PKGARCH references
The cross-canadian compilers are now build once per architecture but were being
installed into tune specific locations which is incorrect. This adjusts things
so they are make TARGET_ARCH specific. We gain the tune specific parts from the
target sysroot which remains tune specific, the compiler and tools are independent
ot that.
binutils/gcc require sysroot options but since we reset at runtime, these shouldn't
have dependencies in the sstate checksums. They are therefore also excluded.
With these patches, switching machines does not result in a rebuild of *-cross-canadian
and the compiler is correctly located and referenced in the target images.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
where X is an armv7a machine and Y is not results in pixman rebuilding
due to the neon option. This is incorrect. The ultimate fix will be
not to apply target system overrides in the nativesdk case. Until
we do that we can at least work around the issue as done by this patch.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only care about the end result in this case, not the specific inputs
that went into determining the gcc option. This change updates the code
to reflect that.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you build nativesdk for machine A, then change to B you will see sstate
manifest warnings for the packagedata files. The stamps are machine
specific and should not be, ditto for native.
This patch copies the populate-sysroot extra stamp entries to avoid
these warnings.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jonathan Liu [Wed, 2 Oct 2013 10:47:11 +0000 (10:47 +0000)]
boot-directdisk: avoid loop in MBR disk signature generation
Instead of looping until the generated signature is non-zero, just
return 'ffffffff' if it's zero. This avoids an infinite loop if the
generated signature is always zero.
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nathan Rossi [Tue, 1 Oct 2013 04:19:42 +0000 (04:19 +0000)]
linux-dummy.bb: Resolve missing task issues
Commit 609d5a9ab9e58bb1c2bcc2145399fbc8b701b85a added additional
initramfs functionality and created an additional task on kernel.bbclass
Adding this task was missed on the linux-dummy recipe, which causes task
dependency issues due to image.bbclass depending on
"virtual/kernel:do_bundle_initramfs". This change adds a dummy task
which resolves the dependency issue.
