Dongxiao Xu [Tue, 8 May 2012 05:28:30 +0000 (13:28 +0800)]
qt4: move functions from python to shell style
In qt4's do_configure operation, it will refer to some variables that
are derived from 'd', however these variable values may be not correct
in multilib case since the extraction of these variables happens before
the multilib handler.
The fix is to move these python style functions back to shell style.
This fixes [YOCTO #2355]
[RP: Fix whitepace] Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[SG: Resolve merge conflicts for 1.2.1] Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Darren Hart [Wed, 2 May 2012 00:21:59 +0000 (17:21 -0700)]
initrdscripts: Update install.sh to work with mmc devices
Fixes [YOCTO #2385]
The installer only searches for hd[ab] sd[ab]. Some newer BSPs have mmcblk
devices that should be used as the install target. These devices also have a
partition prefix (mmcblk0p1 instead of mmcblk01). As they are detected
asynchronously, it is necessary to add the rootwait kernel parameter to avoid
a race condition trying to mount the root device.
As BSPs like the FRI2 and the sys940x have mmc devices and will have a 1.2
release, we should push this to 1.2.1. The changes are perfectly contained and
easily verified.
Test for an mmcblk device and add the p partition prefix if necessary. Add the
rootwait kernel parameter when an mmcblk device is detected. Replace the series
of explicit umount commands with a single umount using a wildcard. This will
find all the partitions and will not try to unmount non-existant devices. Avoid
copy and paste errors by replacing /dev/${device}${pX} references with the
previously assigned rootfs, bootfs, and swap variables.
These changes have been tested on the FRI2 Sato image which installed to
/dev/mmcblk0 as well as the N450 Sato image which installed to /dev/sda. Both
were successful.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Paul Eggleton [Fri, 4 May 2012 13:36:01 +0000 (14:36 +0100)]
buildhistory: fix multiple commit of images and packages at the same time
The echo line here was merging multiple lines into one, and the result
was that if both image and package changes had to be comitted then only
the image changes were being committed and the package changes could
potentially be merged into the next package change. Quoting the variable
reference fixes this.
Fixes [YOCTO #2411]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While building on distros like fedora17, which has /bin/perl,
the target perl scripts get perl path also as /bin/perl.
And that is not correction path of perl on the target.
This commit avoids this error.
| error: Failed dependencies:
| /bin/perl is needed by quilt-0.51-r2.i586
NOTE: package core-image-sato-sdk-1.0-r0: task do_rootfs: Failed
ERROR: Task 8
(/home/nitin/prj/poky.git/meta/recipes-sato/images/core-image-sato-sdk.bb,
do_rootfs) failed with exit code '1'
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Mark Norman [Wed, 25 Apr 2012 10:44:20 +0000 (20:14 +0930)]
uclibc SDK not including libpthread_nonshared.a
Modified the uclibc PACKAGES list order to ensure the uclibc-dev package is
processed before uclibc-staticdev to allow *_nonshared.a libraries to be
packaged in the uclibc-dev package. The *_nonshared.a libraries are required
by the SDK.
Scott Garman [Wed, 25 Apr 2012 05:13:12 +0000 (22:13 -0700)]
libpng: upgrade to 1.2.49
License hasn't changed, just updated the md5 checksums due to trivial
date changes within the text (and the position of the license text
within png.h).
Addresses CVE-2011-3045
Fixes [YOCTO #2352]
Signed-off-by: Scott Garman <scott.a.garman@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andrei Gherzan [Thu, 5 Apr 2012 20:54:22 +0000 (23:54 +0300)]
python: Add patch to search for db.h in inc_dirs and remove warning
python should search for db.h in inc_dirs and not in a hardcoded path.
If db.h is found but HASHVERSION is not 2 we avoid a warning by not.
adding this module to missing variable.
[YOCTO #1937]
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andrei Gherzan [Thu, 5 Apr 2012 20:54:21 +0000 (23:54 +0300)]
python: Add patch for 64bit platform
This patch was added for 64bit host machines. In the compile process python
is checking if platform is a 64bit platform using sys.maxint which is the host's
value. The patch fixes this issue so that python would check if TARGET machine
is 64bit not the HOST machine. In this way will have "dl" and "imageop" modules
built if HOST machine is 64bit but the target machine is 32bit.
[YOCTO #1937]
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
{kernel, module}.bbclass: don't run depmod for module packages during do_rootfs
* depmod already gets executed by pkg_postinst_kernel-image.
* If you build a module using module.bbclass, pkg_postinst returns 1 in
do_rootfs, causing pkg_postinst to run again on first boot. To improve
this situation, I copied pkg_postinst from kernel.bbclass to module.bbclass.
This was rejected by Koen, because he doesn't like the code from
kernel.bblcass, which uses ${STAGING_DIR_KERNEL}. Richard then suggested
that calling depmod during do_rootfs wasn't necessary at all, because
it already gets done by kernel-image.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 19 Apr 2012 21:52:10 +0000 (21:52 +0000)]
utils.bbclass: Testing via env in create_wrapper is a nice idea but breaks things
For example, pseudo-native wants to set LD_LIBRBARY_PATH but setting this
into the environment here causes the existing pseudo (running during do_install)
to poke into paths in /opt and this breaks builds.
The simplest fix is simply not to do this. Comments tweaks to match the code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Tue, 24 Apr 2012 09:25:25 +0000 (10:25 +0100)]
dpkg-native: fix deb-based rootfs construction failure on Fedora 16
Backport a fix from 1.16.x upstream to use fd instead of stream-based
I/O in dpkg-deb, which avoids the use of fflush() on an input stream
(the behaviour of which is undefined by POSIX, and appears to have
changed in the version of glibc introduced in Fedora 16 and presumably
other systems).
Fixes [YOCTO #1858].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
patch.bbclass orignally pointed at /usr/bin/quiltrc for an empty
version to ensure that no user setting were picked up, change this
to /etc/quiltrc in the Native sysroot since we now have a native
sysconfdir.
Make sure that the quiltrc is actually installed in the Native
sysconfdir, not the target, so fix this after the recipe split.
gcc: Add plugins package for ARM, fix /usr/incude packaging
WARNING: For recipe gcc, the following files/directories were installed but not shipped in any package:
WARNING: /usr/include
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc/config
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc/config/arm
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc/config/arm/bpabi-lib.h Signed-off-by: Saul Wold <sgw@linux.intel.com>
WARNING: For recipe xserver-kdrive, the following files/directories were installed but not shipped in any package:
WARNING: /usr/share/man
WARNING: /usr/share/man/man5
WARNING: /usr/share/man/man1
WARNING: /usr/share/man/man1/Xephyr.1
WARNING: /usr/share/man/man1/Xserver.1 Signed-off-by: Saul Wold <sgw@linux.intel.com>
WARNING: For recipe libgcc, the following files/directories were installed but not shipped in any package:
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ecrti.o
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ncrti.o
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ecrtn.o
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ncrtn.o Signed-off-by: Saul Wold <sgw@linux.intel.com>
WARNING: For recipe binutils, the following files/directories were installed but not shipped in any package:
WARNING: /usr/bin/embedspu Signed-off-by: Saul Wold <sgw@linux.intel.com>
Ken Werner [Thu, 19 Apr 2012 10:20:39 +0000 (12:20 +0200)]
bdwgc: Set ARM_INSTRUCTION_SET to "arm"
The bdwgc recipe uses a version of libatomic that fails when building in Thumb
mode. This has been fixed upstream already. The
pulseaudio/libatomics-ops_1.2.bb has the same issue and sets the
ARM_INSTRUCTION_SET to "arm" (probably until a new version gets pulled in).
This patch applies the same workaround to the bdwgc/bdwgc_20110107.bb recipe.
/home/kraj/work/angstrom/build/tmp-angstrom_2010_x-eglibc/sysroots/x86_64-linux/usr/libexec/armv5te-angstrom-linux-gnueabi/gcc/arm-angstrom-linux-gnueabi/4.6.3/ld:
error: hidden symbol '__start___debug' is not defined locally
/home/kraj/work/angstrom/build/tmp-angstrom_2010_x-eglibc/sysroots/x86_64-linux/usr/libexec/armv5te-angstrom-linux-gnueabi/gcc/arm-angstrom-linux-gnueabi/4.6.3/ld:
error: hidden symbol '__stop___debug' is not defined locally
collect2: ld returned 1 exit status
make[1]: *** [plugins/loopback.la] Error 1
sanity.bbclass: add variable to disable the sanity checks
It's useful for Hob to be able to disable the sanity checks completely
without marking them as passed so that the user can get into the GUI to
configure their settings, etc.
Add a variable, DISABLE_SANITY_CHECKS, to do so.
Signed-off-by: Joshua Lock <josh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 23 Apr 2012 21:46:42 +0000 (22:46 +0100)]
python: Fix various contamination issues leading to broken/missing c modules
The move of libcrypto to /lib instead of /usr/lib has broken the _hashlib module
compilation. There were also a number of other failing modules which should
have been building correctly. This turned out partly to be the /lib issue
but also due to a number of native paths creeping into compiler commandlines.
These changes add in /lib as part of the searh directory and remove
a number of host contamination issues within setup.py. Post release we
should really further go through this file and just delete large sections
of it as its hard to be sure what strange paths python is injecting as
search paths.
This patch also fixes issues where re-execution of the compile task
would corrupt the Makefile in various ways, again leading to puzzling
paths within the configuration.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 22 Apr 2012 14:47:30 +0000 (15:47 +0100)]
initramfs-live-boot: Disable unionfs until its issue with the system rootdir are resolved
There are issues with the current unionfs when making a union mount over "/".
Until these are resolved we can't use unionfs for live booting so disable this
temporarily as a workaround.
unionfs is usable in other circumstances.
[YOCTO #2331 workaround]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 22 Apr 2012 14:46:17 +0000 (15:46 +0100)]
pseudo: Drop nativesdk wrapper and link against old memcpy symbol
The -nativesdk pseudo wrapper setting LD_LIBRARY_PATH turned out to be a
bad idea since it can mix up different libc and lib-dl verisons which
may or may not work depending on the phase of the moon.
As an alternative to solving the original problem, this patch drops the
symbol version requirement on memcpy which allows pseudo to work with
libc's back to 2.7 which should be sufficient for our supported targets
using nativesdk.
[YOCTO #2299]
[YOCTO #2351]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 19 Apr 2012 12:17:57 +0000 (13:17 +0100)]
package.bbclass: Ensure kernel modules get stripped
Kernel modules are not marked as executable but we do expect to strip them.
This patch adds in missing code to ensure we do this. Without this images
are getting sigificantly bloated in size.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 19 Apr 2012 07:48:25 +0000 (08:48 +0100)]
gettext.bbclass: Ensure we don't overwrite other DEPENDS_GETTEXT values
In particular, this overwrites the value from cross-canadian.bbclass in
some cases which isn't the desired behaviour and unnecessarily
complicates/breaks the dependency chain.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 19 Apr 2012 07:44:11 +0000 (08:44 +0100)]
qemu: Backport a patch to solve SSE2 instruction emulation issues
This fix addresses various issues seen in qemux86-64 images:
* scroll bars in matchbox-terminal not working
* files not appearing in pcmanfm
* warnings on the console from glib/gobject about invalid gdouble values
Its due to an emulation issue in qemu which the backported patch fixes.
I managed to debug it to a specific function, Khem found the qemu patch
to backport, thanks Khem!
[YOCTO #1906]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
packageinfo.bbclass: A workaround for RPM architecture renaming
For beagleboard platform, the PACKAGE_ARCH for certain recipes is
"armv7a-vfp-neon", however, the architecture label in RPM file name is
"armv7a" due to a potential bug in RPM backend.
This commit is a workaround to make Hob work in this case.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Tue, 17 Apr 2012 23:18:35 +0000 (00:18 +0100)]
libproxy: remove dependency on gconf when x11 not in DISTRO_FEATURES
This allows libzypp to successfully build when x11 is not in
DISTRO_FEATURES (avoiding the libzypp -> libproxy -> gconf -> gtk+
dependency chain which without X results in gtk+ failing at
do_configure).
Fixes [YOCTO #2320].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Garman [Tue, 17 Apr 2012 23:10:30 +0000 (23:10 +0000)]
qemugl: make postinst run at first boot
The previous postinst script was not working for images which use
RPM because do_rootfs could allow qemugl to be installed after
libgl1, and the postinst needs to run after libgl1 is installed.
Hence, it's being changed to run at first boot instead of during
do_rootfs.
Signed-off-by: Scott Garman <scott.a.garman@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
self-hosted-image: remove BB_NO_NETWORK and update Poky SRCREV
Remove BB_NO_NETWORK because we can not guarentee that all
downloads will be available in the self-hosted image for
the possible targets being built. If this image is run with
out networking, failures may be seen and BB_NO_NETWORK
should be set via the Hob
Update the Poky SRCREV so it has the latest set of fixes and
patches.
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The lsb package is needed to enable the distro checking
in the self hosted image. Currently there is no standard
identification in the self-hosted image so use the existing
lsb package which provides lsb_release that parses the
/etc/release file
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
lsb: Add DISTRO Info to /etc/lsb-release file also add util-linux to DEPENDS
Add the DISTRO* fields to the /etc/lsb-release file so the distro
parsing code can find standard information about the Poky Distro
when using the Self-Hosted Image.
The lsb_release command uses getopt which is provided by util-linux
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREVs to pickup the following meta change for the
3.0 and 3.2 kernels:
[
meta: Clean up BSPs kernel config
Clean up some QEMU and non-x86 BSPs kernel config, including
qemuarm
qemuppc
qemux86
beagleboard
mpc8315e_rdb
Only obsolete/invalid kernel configs are removed.
Signed-off-by: Yang Shi <yang.shi@windriver.com>
]
With this commit, the configuration audit for the qemu and hardware
reference boards is (largely) warning free.
Signed-off-by: Yang Shi <yang.shi@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREV for both the 3.0 and 3.2 kernel trees to
pickup the beagleboard xM boot fix:
[
meta/beagleboard: disable CONFIG_PREEMPT
The boot hangs with the message:
mmc0: error -110 whilst initialising SD card
The MMC driver has issues initializing when PREEMPT is enabled (either forced
or voluntary). Unplugging and then plugging the card back will reset the
driver and continue booting. Alternatively, disable preemption.
]
[YOCTO: #1892]
Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 17 Apr 2012 22:01:44 +0000 (18:01 -0400)]
linux-yocto: .diff is a valid patch extension
In fixing an existing patch migration bug, the list of valid extensions
got out of sync from the core patch class. As a result, valid patches
were not being applied to the tree.
Updating the tools to migrate .diff files fixes the issue.
Also in this fix is the removal of .patch in the find_sccs() routine, since
it will never be returned by patch.bbclass when all non-patches are
requested, it is simply confusing.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 17 Apr 2012 11:16:18 +0000 (11:16 +0000)]
sanity.bbclass: If the sanity tests fail, don't mark them as complete
If the sanity tests fail, we still were writing out the stamp which means
they'd get skipped the next time we run bitbake. This is clearly wrong
and we should only write out the stamp file if the sanity tests complete
successfully.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* update-rc.d wasn't executed when the rootfs was built, because
pkg_postinst_avahi-daemon exited early. It wasn't run either
on first boot, because the exit code was 0.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 16 Apr 2012 12:19:10 +0000 (13:19 +0100)]
bitbake.conf: Add PARALLEL_MAKE to BB_HASHBASE_WHITELIST
The value of PARALLEL_MAKE shouldn't affect sstate checksums. In general it
doesn't as the value is injected as a task override and the sstate checksum
doesn't track these. That isn't the case for linux-yocto in particular so
adding it the list of variables to ignore is useful.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Wed, 11 Apr 2012 03:19:52 +0000 (03:19 +0000)]
flex: backport Debian patches to fix generated code warnings
The generated parser had warnings regarding signess and return check
which makes Linux Kernel's perf tool from 3.4 release to fail without
those patches.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 16 Apr 2012 16:43:02 +0000 (17:43 +0100)]
perl: fix re-execution of patch/configure
The perl recipe's do_configure() does some manual sed replacements over
the entire WORKDIR. Fix the following issues with this:
* Skip patches, which fixes re-execution of do_patch after do_configure
has run once
* Ensure that the replacement operation does nothing if do_configure is
re-executed
* Avoid unnecessarily modifying /usr/include paths within documentation
that will end up being packaged
* Fix a quoting issue in the expression used in the grep command that
ended up causing files that did not contain .*\.h after /usr/include
to be matched and modified.
The files modified during do_configure have been compared before and
after this patch to ensure there are no unexpected changes. Some
/usr/include paths that are not within documentation are no longer
being substituted however these are all within comments or scripts for
other Unix operating systems that are not applicable.
[YOCTO #2194]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The require of core-image-minimal overrides the description.
The best fix for this would be conditional setting of DESCRIPTION
in the required images for all image descriptions, but that opens
a potential can of worms. Moving the require fixes this.
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 16 Apr 2012 10:32:46 +0000 (11:32 +0100)]
dropbear: Allow tasks to be safely re-executed
Re-running the debug_patch task would cause the build to fail. This patch
moves the extra patch handling directly into SRC_URI and removes the need
for the separate task, allowing safe re-execution of each task.
[YOCTO #2194]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 16 Apr 2012 10:05:02 +0000 (11:05 +0100)]
docbook-utils-native: Fix re-execution of the unpack task
If the do_unpack task is re-executed, the sed_done stamp was not removed, the
sed commands wouldn't re-run and the build would fail in do_compile. This
patch ensures the stamp is in ${S} and that we clean that directory
when unpack runs so it is a build from sctatch at that point.
[YOCTO #2194]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 15 Apr 2012 17:05:53 +0000 (18:05 +0100)]
gcc-configure-common.inc: Stop gcc looking at build system paths
There were puzzling failures when you make a force recompile of any gcc
component. The error was in do_configure with cross-compilation badness
being detected in config.log files.
gcc is different in that many of the config.log files are generated during
the do_compile phase. This means this host contamination issue has always
been present but only shows up on a rebuild.
The fix is to force the appropriate configuration variable to "none required"
then gcc won't look in the bad locations.
[YOCTO #2279]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 15 Apr 2012 15:32:29 +0000 (16:32 +0100)]
man-pages: Fix to allow re-execution of tasks
The all target in the makefile triggers "screen" and "remove" targets,
neither of which do anything useful/sane for our usecases. The simplest
way to get the makefile to behave is to only use the install target.
Clean up the recipe a bit whilst making these changes and simplify things.
[YOCTO #2194]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 15 Apr 2012 15:00:42 +0000 (16:00 +0100)]
pseudo: Ensure the correct libraries are used at runtime
There can be a conflict between the nativesdk libc and the host system's
libc. It is assumed the nativesdk version is of an equal or higher version.
This is a particular issue for pseudo if its loading a system binary
since the system's libc might be used of an older verison which would
then confuse libpseudo.so when loaded as a preload.
To avoid this, set LD_LIBRARY_PATH so the nativesdk libc is always
used.
Since we now use --without-rpath, we can remove the MAKEOPTS RPATH workaround.
[YOCTO #2299]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 15 Apr 2012 11:02:18 +0000 (12:02 +0100)]
guile: Fix binary relocation issue for precompiled guile objects
When guile-native was relocated, there were messages like:
;;; note: source file /srv/home/pokybuild/yocto-autobuilder/yocto-slave/emenlow/build/build/tmp/sysroots/x86_64-linux/usr/share/guile/2.0/ice-9/eval.scm
;;; newer than compiled /srv/home/pokybuild/yocto-autobuilder/yocto-slave/fri2/build/build/tmp/sysroots/x86_64-linux/usr/lib/guile/2.0/ccache/ice-9/eval.go
and this confuses things like the autogen-native "guile --version"
check. This patch ensures the wrapper script sets the necessary
variables correctly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Sun, 15 Apr 2012 02:01:57 +0000 (03:01 +0100)]
connman-gnome: connman 0.79 API fixes
Fix connman-gnome to work with connman 0.79, which made a number of
fairly serious DBus API changes. Also switch over to the newly
repopulated git repo on kernel.org in which the two previous patches
have been merged.
Fixes [YOCTO #2202].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 14 Apr 2012 21:46:17 +0000 (22:46 +0100)]
mulitlib.bbclass: Ensure correct value of ALL_MULTILIB_PACKAGE_ARCHS is preserved
The value of ALL_MULTILIB_PACKAGE_ARCHS needs to be consistent both
in multilib extended recipes and in normal context. If this isn't the
case it can lead to inconsistent configuration files at a minimum.
This patch ensures the value is preserved during the class extension code
since computing it after that point is hard.
[YOCTO #2290]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 14 Apr 2012 17:31:24 +0000 (18:31 +0100)]
update-alternatives: Fix for compatibility with multilib recipes
The PN == BPN test was designed to exclude native/nativesdk but also unfortunately
excludes multilib unintentionally. This change fixes this and allows multilib images
with alternatives to funciton correctly.
[YOCTO #2214]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Generally distros keep perl at /sur/bin/perl
Fedora 17 alpha also has /bin/perl
this causes eglibc build on such distros to put perl interpreter path in
the perl scripts as /bin/perl
But we set perl location for target as /usr/bin/perl
This mismatch of perl path causes failure of rootfs image creation
like this:
| error: Failed dependencies:
| /bin/perl is needed by eglibc-utils-2.13-r23+svnr15508.i586
NOTE: package core-image-sato-1.0-r0: task do_rootfs: Failed
ERROR: Task 8
(/home/nitin/prj/poky.git/meta/recipes-sato/images/core-image-sato.bb,
do_rootfs) failed with exit code '1'
This Fixes bug : [YOCTO #2286]
RP: Updated to better account for -nativesdk Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
