Saul Wold [Mon, 15 Dec 2014 19:21:49 +0000 (11:21 -0800)]
openssh: move setting LD to allow for correct override
Using the export LD in the recipe does not allow for secodnary toolchain
overriding LD later, by setting it in the do_configure_append the export
is used by autotools setting LD based on the env, but would allow for
override later.
[YOCTO #6997]
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
vte will pull in the gtk libs itself. This can cause build failures if
the native gtk was build with glib>=2.41 while the sysroot native glib
is <=2.40.
Fix for [YOCTO #7077].
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Awais Belal [Tue, 16 Dec 2014 15:46:40 +0000 (15:46 +0000)]
gstreamer1.0-* fix configure for out of tree build on git recipes
The autogen.sh script lies in the srcdir ($S) and is required to be run on git
based checkouts of gstreamer packages in order to generate initial
makefiles. So, we fix this by cd'ing to the specific dir, run the required
script and then come back to our initial dir which is builddir ($B).
Additionally rather than overriding the whole do_configure step we only _prepend
to make it clear what we are doing here.
Signed-off-by: Awais Belal <awais_belal@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Cc: Kang Kai <Kai.Kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 9 Dec 2014 15:05:35 +0000 (15:05 +0000)]
python-pycurl: build docstrings to fix rebuilds
On a rebuild base.bbclass will invoke "make clean" to ensure that old build
objects are not used. This will delete docstrings.c and the only way to
re-generate that is with a dedicated setup.py target.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Kai Kang [Tue, 9 Dec 2014 09:36:41 +0000 (17:36 +0800)]
valgrind: update to 3.10.1
Update valgrind from 3.10.0 to 3.10.1 which is a bug fix release. It
fixes various bugs reported in 3.10.0 and backports fixes for all
reported missing AArch64 ARMv8 instructions and syscalls from the trunk.
Add dependency perl-module-file-glob for ptest subpackage.
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jackie Huang [Mon, 8 Dec 2014 06:08:03 +0000 (01:08 -0500)]
apr: avoid absolute paths for grep
The apr provides usr/share/build-1/libtool which is required by
the recipe such as apache2, and it will find grep on the host
and set absolute paths in libtool: GREP="/usr/bin/grep"
If we build apr/apr-native on a host that grep is in "/usr/bin/grep",
and re-use the sstate on another host with "/bin/grep", it will fail
when build apache2/apache2-native with:
| tmp/sysroots/x86_64-linux/usr/share/build-1/libtool: line 1093: /usr/bin/grep: No such file or directory
| tmp/sysroots/intel-x86-64/usr/share/build-1/libtool: line 1093: /usr/bin/grep: No such file or directory
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Bian Naimeng [Mon, 8 Dec 2014 05:45:07 +0000 (13:45 +0800)]
cpio: fix bug CVE-2014-9112 for cpio-2.11
Obtain detain from following URL.
http://lists.gnu.org/archive/html/bug-cpio/2014-12/msg00000.html
http://git.savannah.gnu.org/cgit/cpio.git/commit/?id=746f3ff670dcfcdd28fcc990e79cd6fccc7ae48d
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Bian Naimeng [Mon, 8 Dec 2014 05:45:06 +0000 (13:45 +0800)]
cpio: fix bug CVE-2014-9112 for cpio-2.8
Obtain detain from following URL.
http://lists.gnu.org/archive/html/bug-cpio/2014-12/msg00000.html
http://git.savannah.gnu.org/cgit/cpio.git/commit/?id=746f3ff670dcfcdd28fcc990e79cd6fccc7ae48d
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Peter A. Bigot [Mon, 10 Nov 2014 18:05:54 +0000 (12:05 -0600)]
bluez5: add a package for tools left in the build area
In bluez4 gatttool was provided as a command-line interface to the
Generic Attribute Profile. In bluez5 this tool is still built but is no
longer installed. It is still necessary for those wishing to use GATT
since the programmatic API is not yet mature. A variety of other useful
tools are treated similarly by bluez5.
Make these tools available in the bluez5-noinst-tools package, in a way
that allows control over which tools are packaged, with the default
being all that are provided in a particular release of bluez.
Magnus Olsson [Fri, 5 Dec 2014 10:03:46 +0000 (11:03 +0100)]
python: add python-codecs runtime dependency for python-json
A piece of JSON initialization code that runs when you "import json"
tries to use the hex-decoder, thus breaks if you do not have
python-codecs installed. Example:
>>> import json
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/json/__init__.py", line 108, in <module>
from .decoder import JSONDecoder
File "/usr/lib/python2.7/json/decoder.py", line 24, in <module>
NaN, PosInf, NegInf = _floatconstants()
File "/usr/lib/python2.7/json/decoder.py", line 18, in _floatconstants
_BYTES = '7FF80000000000007FF0000000000000'.decode('hex')
LookupError: no codec search functions registered: can't find encoding
This patch adds a runtime dependency on python-codecs for python-json and
re-generates the python manifests for Python v2.7. Solves [YOCTO #7020].
Signed-off-by: Magnus Olsson <magnus@minimum.se> Signed-off-by: Ross Burton <ross.burton@intel.com>
Maxin B. John [Fri, 5 Dec 2014 17:08:49 +0000 (18:08 +0100)]
python: fix ssl import error
Fix this ssl import error:
Python 2.7.3 (default, Dec 5 2014, 16:24:17)
[GCC 4.9.1] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import ssl
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/ssl.py", line 92, in <module>
import base64 # for DER-to-PEM translation
ImportError: No module named base64
Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Aníbal Limón [Thu, 4 Dec 2014 20:58:26 +0000 (14:58 -0600)]
xorg-xserver: Upgrade to 1.16.2.
Add PACKAGECONFIG systemd, xserver-xorg now depends in dbus because
adds support for systemd-logind, dbus is used by xserver-xorg to
communicate with systemd.
Add conditional enablement of systemd-logind if DISTRO_FEATURES contains
systemd.
Remove crosscompile, mips64-compile and present-module because are already
in upstream.
Aníbal Limón [Thu, 4 Dec 2014 04:11:11 +0000 (22:11 -0600)]
mesa: Upgrade to 10.3.4.
Remove 0002-pipe_loader_sw-include-xlib_sw_winsys.h-only-when-HA,
0003-EGL-Mutate-NativeDisplayType-depending-on-config.patch and
0006-fix-out-of-tree-egl.patch are already in upstream.
Richard Purdie [Thu, 4 Dec 2014 19:49:19 +0000 (19:49 +0000)]
qemu/libc-package: Fix qemu option handling
The 'overrides' here are PACKAGE_ARCH based and hence not overrides
as such and the _append wasn't working in many cases. This adjusts the
code to use PACKAGE_ARCH as the accessor and ensures the variables
work as expected. This fixes various segfaults and ensures postinsts
run at build time rather than on the target system.
Aníbal Limón [Thu, 4 Dec 2014 03:55:32 +0000 (21:55 -0600)]
libdrm: Upgrade to 2.4.58.
Disable man pages creation because it needs to download docbook.xsl from
upstream site and sometimes can't (resource unavailable) and this cause
build fails.
Remove GNU_SOURCE_definition patch it's already integrated in upstream.
Ross Burton [Thu, 4 Dec 2014 15:20:53 +0000 (15:20 +0000)]
default-distrovars: add gcc-source recipe to the GPLv3 whitelist
gcc-source is a convenience recipe to save duplicate copies of the GCC source
tree and should be whitelisted for GPLv3 avoidance along with the rest of GCC.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Thu, 4 Dec 2014 15:13:25 +0000 (15:13 +0000)]
gcc: stub do_fetch instead of removing it
Whilst gcc doesn't have any source to fetch, it still needs a fetch task so that
a world fetch can run without errors. So instead of deleting the fetch task,
stub it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Wenzong Fan [Fri, 28 Nov 2014 07:59:54 +0000 (02:59 -0500)]
coreutils-native: don't install groups
This binary is provided by shadow-native nowadays. Fixes:
ERROR: The recipe coreutils-native is trying to install files \
into a shared area when those files already exist. \
Those files and their manifest location are: \
.../tmp/sysroots/x86_64-linux/usr/bin/groups \
Matched in manifest-x86_64-shadow-native.populate_sysroot
Jackie Huang [Fri, 21 Nov 2014 09:50:57 +0000 (04:50 -0500)]
gzip: fix MakeMaker issues with using wrong SHELL/GREP
A set of substitution is being processed to all target scripts with sed by
replacing some key words with the detected values at configure time, this
is exactly not compliant with cross compling, and will cause missing path
errors at run time like:
"/usr/bin/zgrep: line 230: /usr/bin/grep: No such file or directory"
Fixed by removing unneeded substitution and using real runtime paths
instead.
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jackie Huang [Tue, 2 Dec 2014 09:40:38 +0000 (04:40 -0500)]
util-linux: add switch_root to alternatives list
switch_root is provided by both busybox in /sbin/switch_root and util-linux provides one
in /usr/sbin/switch_root, so move util-linux's to sbin and setup ALTERNATIVE_LINK.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Zheng Junling [Wed, 3 Dec 2014 12:38:30 +0000 (12:38 +0000)]
openssh: fix using the original config files in srcdir
Currently, we install our own ssh_config and sshd_config into ${S} in
do_compile_append() task. So when finishing compiling, their .out files
are generated by the original files, rather than by our own files.
In most cases, installing "$(CONFIGFILES)" in Makefile will generate .out
files again, and then installing "install-sysconf", which will install
these two files into $(DESTDIR), thus we get what we expect.
However, when parallel installing, "install-sysconf" may be installed
before "$(CONFIGFILES)" sometimes. In this rare case, the .out files
generated in the first time rather than those in the second time will be
installed into $(DESTDIR), and thus we get an unexpect result.
This patch fixes this bug through transfering the installing of our own
files from do_compile_append() into do_configure_prepend().
Signed-off-by: Zheng Junling <zhengjunling@huawei.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Juro Bystricky [Thu, 27 Nov 2014 18:32:59 +0000 (10:32 -0800)]
eglibc: modified option-groups.h generation
option-groups.h only explicitely #defines options that are enabled.
EGLIBC options are typically pre-processed under the assumption that if
an option is not explicitely defined then it evaluates as 0.
This assumption is correct, but it generates a compiler warning
message each time an undefined symbol is being evaluated.
In order to remove the warnings, each EGLIBC option is now defined
as 1 if the option is enabled or as 0 otherwise.
The consequence is we cannot use #ifdef OPTION_XXX when evaluating
the option, we must always use #if OPTION_XXX.
[YOCTO #7001]
Signed-off-by: Juro Bystricky <jurobystricky@hotmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Drew Moseley [Thu, 27 Nov 2014 00:49:55 +0000 (19:49 -0500)]
mesa-demos: Move util to the front of the SUBDIRS variable.
This forces it to be built first since many of the demos
require it. Resolves build failures such as the following
when certain demos are enabled (notably when PACKAGECONFIG
contains glut):
make[2]: *** No rule to make target `../util/libutil.la', needed by `copypix'. Stop.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Drew Moseley [Thu, 27 Nov 2014 00:49:54 +0000 (19:49 -0500)]
glew: Additional fix for generation of glew.pc.
Without this fix, building mesa-demos with the glew
PACKAGECONFIG will result in errors like the below
being logged in tmp/work/*/mesa-demos/*/build/config.log:
configure:16529: checking for GLEW
configure:16536: $PKG_CONFIG --exists --print-errors "glew >= 1.5.4"
Package @requireslib@ was not found in the pkg-config search path.
Perhaps you should add the directory containing `@requireslib@.pc'
to the PKG_CONFIG_PATH environment variable
Package '@requireslib@', required by 'glew', not found
configure:16539: $? = 1
Signed-off-by: Drew Moseley <drew_moseley@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Chen Qi [Sun, 30 Nov 2014 08:46:37 +0000 (16:46 +0800)]
libxslt: create wrapper to avoid host system referencing
By default, xsltproc from libxslt would use configuration files under
/etc/xml. To avoid host system contamination, we create a wrapper for
this command to make it use configuration files in the sysroot directory.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 2 Dec 2014 15:41:10 +0000 (15:41 +0000)]
dbus: don't use PTEST_ENABLED as recipe doesn't inherit ptest
As this recipe's ptest support is merely a shim to pull in dbus-test-ptest it
doesn't inherit ptest. This means that PTEST_ENABLED isn't ever set, so check
DISTRO_FEATURES directly.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Mon, 1 Dec 2014 16:26:55 +0000 (16:26 +0000)]
python: ensure all of Python is installed in nativesdk
If any part of Python gets installed in a SDK, we need to ensure that all of
Python gets installed to avoid replacing python in the environment with a
minimal package set.
[ YOCTO #6735 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Mon, 1 Dec 2014 13:23:30 +0000 (13:23 +0000)]
gdb: disable Guile
GDB 7.8 added Guile support, and it will auto-detect if Guile is present (which
is non-deterministic, so bad), and if it's present will fail to find the guild
binary as it doesn't consider the sysroot.
For now disable Guile support in GDB, if there is a need to have it enabled in
the future then GDB/Guile can be fixed.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Laszlo Papp [Thu, 27 Nov 2014 17:40:51 +0000 (17:40 +0000)]
toolchain-script: Add support for ccache builds with the SDK
It is necessary to have an SDK for developers who build their software with
ccache to speed up the compilation. Without resolving this, unfortunately the
compilation will fail for them.
Signed-off-by: Laszlo Papp <lpapp@kde.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jian Liu [Fri, 21 Nov 2014 09:17:13 +0000 (17:17 +0800)]
libpam: avoid overwritting editable files during package updating
Use CONFFILES to mark editable files as such,
/etc/pam.d/common-session
/etc/pam.d/common-auth
/etc/pam.d/common-password
/etc/pam.d/common-session-noninteractive
/etc/pam.d/common-account
If there is no %config micro before the file name in the spec file,
this file will be overwritten after updating package.
This will make our settings lost.
Signed-off-by: Jian Liu <jian.liu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jian Liu [Fri, 21 Nov 2014 09:17:11 +0000 (17:17 +0800)]
initscripts: avoid overwritting editable files during package updating
Use CONFFILES to mark editable files as such,
/etc/init.d/checkroot.sh
If there is no %config micro before the file name in the spec file,
this file will be overwritten after updating package.
This will make our settings lost.
Signed-off-by: Jian Liu <jian.liu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jian Liu [Fri, 21 Nov 2014 09:17:10 +0000 (17:17 +0800)]
base-files: avoid overwritting editable files during package updating
Use CONFFILES to mark editable files as such,
/etc/motd
/etc/nsswitch.conf
/etc/profile
If there is no %config micro before the file name in the spec file,
this file will be overwritten after updating package.
This will make our settings lost.
Signed-off-by: Jian Liu <jian.liu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Hongxu Jia [Fri, 21 Nov 2014 08:00:55 +0000 (16:00 +0800)]
package_manager.py: check the result of create_index
While invoking create_index failed, there was no error output
and didn't break the build until the package installation.
...
|ERROR: run-postinsts not found in the base feeds (qemux86 i586 x86
noarch any all).
...
The reason is we used multiprocessing to execute create_index, and
did not check its invoking result.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Hongxu Jia [Sat, 8 Nov 2014 09:04:38 +0000 (17:04 +0800)]
compress_doc.bbclass: support update-alternatives
While doc file make use of update-alternatives to fix confliction,
we should reconfigure update-alternatives for doc compression.
Such as util-linux-doc:
...
update-alternatives --install /usr/share/man/man1/last.1 last.1
/usr/share/man/man1/last.1.util-linux 100
...
was updated by doc_compress to
...
update-alternatives --install /usr/share/man/man1/last.1.bz2 last.1.bz2
/usr/share/man/man1/last.1.util-linux.bz2 100
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
The previous detection missing the following manual file:
...
gawk-doc/usr/share/man/man3/readfile.3am
libpcap-doc/usr/share/man/man3/pcap_dump_open.3pcap
...
We use re to imporve it.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
and because 'bitbake' cleans environment we can pass it completely
instead of trying to enumerate needed env.
With the 'env.patch' the FULLCC variable is not needed anymore (which
would break when CC is 'ccache arm-...-gcc' and host ccache is used)
because the correct $PATH is available during scons build:
| sh: .../sysroots/x86_64-oe-linux/usr/bin/arm-linux-gnueabi/ccache: No such file or directory
| scons: *** [context.o] Error 127
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Ross Burton <ross.burton@intel.com>
Saul Wold [Mon, 24 Nov 2014 15:37:52 +0000 (07:37 -0800)]
resolvconf: add fixes for busybox and make it work
resolvconf was missing a script and needed readlink which was in
/usr/bin. Also the /etc/resolv.conf was not being correctly linked
to /etc/resolvconf/run/resolv.conf, which is fixed by the volaties
change which is now a file as opposed to created in do_install.
Ensure that the correct scripts for ifup/ifdown get installed and that
resolvconf is correctly enabled at startup
[YOCTO #5361]
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Tue, 25 Nov 2014 17:58:10 +0000 (17:58 +0000)]
gcc: Rework shared work
The current implementation of shared work for gcc is at best confusing. It relies
on the fetch/unpack/patch tasks having exactly the same stamps and if this gets
broken for some reason, its hard to figure out what the problem is. It also
leads to complex code in bitbake.
The benefits of shared work for gcc are clear but a better approach is needed. This
patch adjusts things so that a single new recipe (gcc-source) provides the
fetch/unpack/patch/preconfigure tasks, the rest of gcc simply depends on these tasks
and have no fetch/unpack/patch tasks of their own.
This means we should get the significant benefits (disk usage/performance) of the
single source tree but in a way which has less potential for problems and is
easier for people to understand. The cost is an extra recipe/some inc files
which is probably a good tradeoff.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 1 Dec 2014 23:47:47 +0000 (23:47 +0000)]
bitbake.conf: remove internal flags from BB_SIGNATURE_EXCLUDE_FLAGS
As the code that uses BB_SIGNATURE_EXCLUDE_FLAGS uses d.getVarFlags() so doesn't
get to see the internal flags, remove _append and _prepend. Also defaultval is
now _defaultval and thus internal, so remove that too.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
