Paul Eggleton [Mon, 27 Jul 2015 13:03:59 +0000 (14:03 +0100)]
oeqa/utils/qemurunner: avoid blocking on stty when running under oe-selftest
runqemu-internal runs stty to return the terminal to its previous state
in case QEMU hasn't done that properly (which it at least used to do
when it crashed). For some reason I have yet to determine, stty blocks
(on tcsetattr() according to gdb) when run within QemuRunner() under
oe-selftest, with the result that we always wait until the timeout and
then we kill the script, which adds an extra delay after QEMU is
stopped. Naturally you would assume that this is something to do with
the nature of the terminal under which it is being run; however no
amount of playing around with stdin/stdout/stderr seemed to fix the
issue, apart from passing in subprocess.PIPE as stdin which makes stty
error out with "stty: standard input: Inappropriate ioctl for device". I
was also unable to come up with a reliable test for the terminal which
we could use inside runqemu-internal to avoid calling stty. For now, go
with the stdin=subprocess.PIPE workaround to at least avoid the delay
with minimal ill effect.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1) it prevented logging to the task log from working within bitbake
-c testimage. This is due to the logger object being set up too early
which interferes with BitBake's own logging. If we prefix the name
with "BitBake." everything works (and we don't need to set the
logging level).
2) Additionally because it called the log functions on the logging
module and not the logger object it set up, this caused the
oe-selftest logging to start printing everything from that point
forward.
Fix these two issues and return us to the desired behaviour for
do_testimage.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes it easier to extend, as a layer can add its own sub-commands.
Argument parsing is also separated into two steps, the same way it's done in
recipetool, as we need access to the global command-line arguments early,
before plugins are loaded, both for debugging arguments and for the bitbake
path (we need to load the bitbake module to get tinfoil, which is now needed
to load the plugins).
Rather than constructing tinfoil once and passing it through into sub-commands
for their use, we have to construct it for configuration metadata, use it, and
then shut it down, as some sub-commands call out to recipetool, which needs
its own tinfoil instance, and therefore needs to acquire the bitbake lock. If
we're still holding the lock at that point, that's clearly a problem.
[YOCTO #7625]
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
This separates the argument parsing into two steps, which lets us apply global
settings like enabling debugging before the plugins load, so we can see the
paths where plugins are being loaded.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ed Bartosh [Mon, 27 Jul 2015 10:55:52 +0000 (13:55 +0300)]
toaster.bbclass: Fix ValueError
Running "bitbake xxx:do_unpack" resulted in exception at the
BuildCompleted event from toaster.
The reason for this exception was usage of ':' as a field
delimiter in toasterstatlist file. As target can optionally
contain ':<task>' suffix it caused split(':') to throw exception:
File "toaster_collect_task_stats(e)", line 71, in
toaster_collect_task_stats(e=<bb.event.BuildCompleted object at
0x7f8434deed50>)
ValueError: too many values to unpack
Fixed by changing delimiter ':' -> '::'
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Mon, 6 Jul 2015 10:35:35 +0000 (03:35 -0700)]
gcc-target 5.1: fix for libcc1
Fixed:
* gcc 5 introduces a plugin libcc1.so, which is used by gdb, the target
gcc didn't build it in the past because gcc_cv_objdump is null, and
the error was:
gcc-5.2.0/libcc1/configure: line 14531: -T: command not found
This only happens for tar gcc as the code shows:
if test x$build = x$host; then
export_sym_check="objdump${exeext} -T"
elif test x$host = x$target; then
export_sym_check="$gcc_cv_objdump -T"
else
export_sym_check=
fi
* Install libcc1.so and libcc1plugin.so to
$(libexecdir)/gcc/$(target_noncanonical)/$(gcc_version) as lto-plugin did.
* Use sed command to fix bad RPATH iussue.
[YOCTO #7956]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 25 Jul 2015 22:05:22 +0000 (23:05 +0100)]
update-rc.d: Include updated-rc.d in DEPENDS
If you build a user of updated-rc.d like udev, as things stand currently
nothing pulls in updated-rc.d but there is a dependency added on the
package at do_package time. This can lead to errors during rootfs
construction either with licensing. The fact its a RRECOMMEND means
the image are not deterministic.
A particularly good test case for reproducing this is:
Bruce Ashfield [Tue, 21 Jul 2015 15:21:07 +0000 (11:21 -0400)]
linux-yocto: introduce 4.1 versioned recipes
Updating the linux-yocto kernel recipes to include a named/versioned 4.1
recipe. This will be the LTSI kernel, and the 3.14 and 3.19 kernels will
be removed in subsequent commites (once reference boards have transitioned).
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 21 Jul 2015 15:21:05 +0000 (11:21 -0400)]
kern-tools: standalone tree configuration
Updating the kern-tools SRCREV to import the following changes:
cbd4b7102668 patchme/updateme: unify meta directory handling b65075997152 configme: standalone operation
The change of note is [configme: standalone operation], which makes the
kernel configuration script free from dependencies on other parts of the
kern-tools.
With this change, we set the stage to extend kernel configuration
fragments and auditing to arbitrary trees.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 21 Jul 2015 15:21:04 +0000 (11:21 -0400)]
linux-yocto: split meta data from kernel repository
The linux-yocto tree has always been a combined set of kernel changes
and configuration (meta) data carried in a single tree. While this
format is effective at keeping kernel configuration and source
modifications synchronized, it isn't always obvious to developers on
how to manipulate the meta data versus the source.
With this change, we remove the meta data processing from the
kernel-yocto class and use the external meta-data repository that
has always been used to seed the linux-yocto meta branch.
After this change, linux-yocto can no longer process combined trees,
and is simplified as a result.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Thu, 23 Jul 2015 21:59:49 +0000 (22:59 +0100)]
oeqa/runtime/parselogs: don't use uname to get MACHINE
Instead of running "uname -n" on the target (which actually returns the
hostname) to get something approximating the hostname (or not, if that has been
overriden), simply fetch MACHINE from the datastore.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Thu, 23 Jul 2015 21:59:48 +0000 (22:59 +0100)]
oeqa/selftest/imagefeatures: handle killpg victim not existing
If Pexpect throws an exception it may be because the child has already died, in
which case killpg will fail. Catch the latter exception silently, and output
the exception from Pexpect.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This locale package isn't guaranteed to exist, depending on the value of
GLIBC_GENERATE_LOCALES.
The value of GLIBC_GENERATE_LOCALES can be specified to not contain
locale-base-ru-ru, thus resulting in unsatisfied dependency. Its better
to remove hardcoded dependency upon locale-base-ru-ru in favor of a
recommendation, as this locale isn't always available depending upon the
value of GLIBC_GENERATE_LOCALES.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Abdur Rehman <abdur_rehman@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
recipetool: appendsrcfile: handle S == STAGING_KERNEL_DIR
When determining the path from WORKDIR to the extracted sources, we're using
S, but if S is in work-shared, that's problematic and won't give us good
results, so assume 'git' for that case, warning when appropriate.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeqa/buildoptions.py: automate test case 926, archive work dir and export source
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeqa/buildoptions.py: automate test case 563; build directfb image
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joe Slater [Tue, 21 Jul 2015 17:39:10 +0000 (10:39 -0700)]
common-glibc: define bash_cv_getcwd_malloc
We do not want bash to use internal code for getcwd() because
it can fail in certain filesystem types. Trust that the function
in glibc is not "broken".
Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bootimg: remove previous FATIMG before creating a new one
Since version 3.0.0 of dosfstools, mkdosfs opens the to-be-filesystem
file with O_EXCL. Since the filesystem is also opened with O_CREAT,
the -C option of mkdosfs can only succeed if FATIMG does not exists.
Thus, delete any previous FATIMG file. The file can be safely deleted
as we are inside build_fat_img because we want to create an new
FATIMG.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nominally tmux sets TERM=screen which we are including in
ncurses-terminfo-base. However, if tmux detects that it's running in a
terminal capable of 256-color output (e.g. xterm-256color), it will
instead use TERM=screen-256color. We aren't including that, and we ought
to be.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move ROOTFS_POSTPROCESS_COMMANDs from core-image.bbclass to
image.bbclass so that images built using just image.bbclass
will benefit from them. Without this change, an image built
using image.bbclass did not honor read-only-rootfs image feature.
Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Tue, 14 Jul 2015 02:51:57 +0000 (19:51 -0700)]
lttng-ust: 2.6.1 -> 2.6.2
* Remove add-aarch64.patch since it is already in the source.
* Rename lttng-ust_2.6.1.bb -> lttng-ust_git.bb
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Mon, 20 Jul 2015 14:10:30 +0000 (11:10 -0300)]
u-boot: Upgrade to 2015.07 release
This upgrades the U-Boot and its related recipes for the 2015.07
release.
The following recipes has been upgraded:
- u-boot
- u-boot-mkimage
- u-boot-fw-utils
The patches which were applied on top of the 2015.01 release are
dropped as those are not needed in this release.
The license checksum update was due minimal changes in the text, those
have no impact in the license terms.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kai Kang [Mon, 20 Jul 2015 07:59:04 +0000 (15:59 +0800)]
volatile-binds: correct path of command umount
It calls /sbin/umount to stop service var-volatile-lib. But umount is
installed into directory /bin. Correct it.
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeqa/syslog: Removed a pointless testcase and added skip for another.
The testcase syslog --help was rather useless and also causing problems
on images where syslog was non-busybox, like LSB images so I removed it.
Added a skip condition for TC 202 for the same reason. If syslog is
non-busybox then the test skips.
Signed-off-by: Lucian Musat <george.l.musat@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeqa/prservice: add useful failure messages to test cases
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeqa/recipetool: add useful failure messages to test cases
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeqa/pkgdata: add useful failure messages to test cases
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Daniel Istrate [Wed, 15 Jul 2015 14:35:34 +0000 (17:35 +0300)]
oeqa/runtime: Added one runtime testcase in connman.
(testcase 223) Check that only one connmand runs in background.
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 22 Jul 2015 07:08:55 +0000 (08:08 +0100)]
rpm4: Drop native RDEPENDS
Native recipes should *never* depend on target recipes since this would
cause them to rebuild every time the target changes. Before the recent
datastore changes, this happened to work. Now, this makes rpm-native
unbuildable since base-files-native doesn't exist and the code remaps
the variable.
Dropping these dependencies here is the correct way to resolve this issue
and fix an autobuilder selftest failure.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Daniel Istrate [Tue, 21 Jul 2015 12:54:40 +0000 (15:54 +0300)]
oeqa/selftest: Fix imagefeature testcases not to interfere with testimage on AB
[YOCTO #8017] - selftest does not use pkill qemu
[YOCTO #7976] - tests do not touch .ssh/known_hosts
- don't hardcode qemu IP
[YOCTO #8027] - use qemu nographic
Extra: removed unnecessary assert for bitbake and runCmd status
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 21 Jul 2015 11:16:03 +0000 (12:16 +0100)]
native: Move virtclass override to earlier so DEPENDS is handled correctly
Currently the virtclass override is added too late to be taken into
account when DEPENDS and other variables are processed by the virtclass
extension code. This sets the overrides in a more optimal place, meaning
they are accounted for in variables like DEPENDS.
Recipes in meta-oe like libwmf-native showed the issue.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Fri, 17 Jul 2015 14:40:22 +0000 (15:40 +0100)]
core-image-lsb-sdk: use kernel-devsrc to ensure kernel module builds work
With the move of the kernel source to the kernel-devsrc, we need this package to
ensure the kernel module sanity tests made on core-image-lsb-sdk continue to
pass. Therefore update the name of the package included in the image.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Quanyang Wang [Fri, 17 Jul 2015 02:58:44 +0000 (10:58 +0800)]
kexec-tools: change powerpc memory size limit
When run "kexec" in powerpc board, the kexec has a limit that
the kernel text and bss size must be less than 24M. But now
some kernel size exceed the limit. So we need to change the limit,
else will get the error log as below:
my_load:669: do
Could not find a free area of memory of 0x12400 bytes...
Could not find a free area of memory of 0x13000 bytes...
locate_hole failed
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Kevin Hao [Fri, 17 Jul 2015 02:58:32 +0000 (10:58 +0800)]
kexec-tools: disable the GCC's stack protection for purgatory code
If the GCC's stack protection is enabled by default, the purgatory will
also be built with this option. But it makes no sense to enable this
for the purgatory code, and would cause error when we are trying to
relocate the purgatory codes because symbol like __stack_chk_fail is
unresolved. Instead of disabling this for some archs specifically,
disable it for all the archs.
Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
pulseaudio: rdepend on modules referenced by start-pulseaudio-x11
pulseaudio-server contains /usr/bin/start-pulseaudio-x11 when X11 is
enabled, and that script tries to load module-device-manager,
module-x11-cork-request, module-x11-publish, and module-x11-xsmp.
Therefore, pulseaudio-server should rdepend on those modules when X11
is enabled, otherwise the script won't work as intended.
[YOCTO #8007]
Signed-off-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Thu, 16 Jul 2015 23:34:08 +0000 (00:34 +0100)]
neard: merge .inc file
The .inc file contains so much version-dependent logic (for example behaviour of
libexecdir and location of installed daemon) that there's not really any point
in having the two split.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Thu, 16 Jul 2015 22:51:55 +0000 (23:51 +0100)]
gnome-icon-theme: clean up icon-naming search
Previous this recipe added an argument to specify where the icon-name-mapping
binary is installed, to override a failing pkg-config call (as target pkg-config
won't find native .pc files), and munged libexecdir as it likely contains PN.
This is all very complicated and we have a native pkg-config binary now, so just
use pkg-config-native for that section of configure.ac.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Sadly, smart is not deterministic so the same build can go down multiple different
pathways. We'd expect to see the same warnings however depending on the pathway
taken, it may or may not warn, particularly with Recommends since they're optional.
For example, where a Recommended package is available but has Conflicts, we'd expect
to see an warning that we couldn't install it. Some code paths silently hide this
(its a LOCKED_CONFLICT). We add printing of warnings for this case.
Also, if there are two compatible feeds available (e.g. i586 and core2_32), this
changes the code path from direct _install() to _pending() since there are multiple
providers. This patch adds warning handling to _pending() so we don't hit hard
failures there. This is as seen with the mysterious libspeexdsp failures for x86-lsb
on the autobuilder.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Thu, 16 Jul 2015 22:53:01 +0000 (23:53 +0100)]
lib/oe/package_manager: Use log-level warning instead of quiet
quiet means that no warnings are shown on the console and really is too
quiet for our needs. This is more verbose but that is better than too
little and does aid debugging things when they go wrong.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Thu, 16 Jul 2015 22:47:30 +0000 (23:47 +0100)]
package_ipk/deb: Drop version information from RPROVIDES
In some scenarios rpm needs version information from RPROVIDES. We can
add this to the metadata where needed however we need to stop it entering
the ipk/deb packages. This data is not needed due to the way opkg/dpkg
handle the data.
This patch ensures that data isn't used.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Thu, 16 Jul 2015 22:48:51 +0000 (23:48 +0100)]
debian: Add versions to RPROVIDES
Recently, libspeexdsp-dev added RCONFLICTS = "speex-dev < 1.2rc2". where
libspeexdsp is 1.2rc3. That all seems reasonable, except there is a problem.
debian.bbclass renames speex-dev to libspeex-dev and adds a "Provides: speex-dev"
which the packaging backends duly note. The trouble is rpm sees that as having no
version at all. This means that "speex-dev < 1.2rc2" conflicts with "speex-dev"
and the -dev package simply cannot be installed.
We can't simply version all Provides for rpm since some dependencies clearly
shouldn't be versioned (e.g. the locale ones).
The solution that seems to work best is to add the versions in debian.bbclass.
If the backend doesn't like these, the backend can then strip them off
(separate patch does this).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
Andre McCurdy [Thu, 16 Jul 2015 01:58:07 +0000 (18:58 -0700)]
libcap: avoid losing default Large File Support CFLAGS
-D_LARGEFILE64_SOURCE and -D_FILE_OFFSET_BITS=64 are present in the
default libcap CFLAGS. Add them to the OE CFLAGS too, so that they
are still in effect when the OE CFLAGS over-ride the defaults.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
