Richard Purdie [Sun, 9 May 2021 17:44:27 +0000 (18:44 +0100)]
grub2: Add CVE whitelist entries for issues fixed in 2.06
We're using a pre-release version of 2.06 so these issues are fixed but
continue to show up in the checks since it is pre-2.06 and the CPE
entries are "before but excluding 2.06".
Adding these will clean up CVE reports until the 2.06 release comes out.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Daniel McGregor [Tue, 18 May 2021 22:09:29 +0000 (16:09 -0600)]
lib/oe/gpg_sign.py: Fix gpg verification
A stray space made it into the command for verifying gpg signatures.
This caused verification to fail, at least on my host. Removing the
space makes it work as expected.
Signed-off-by: Daniel McGregor <daniel.mcgregor@vecima.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stefan Ghinea [Mon, 17 May 2021 17:38:47 +0000 (20:38 +0300)]
boost: fix do_fetch failure
Bintray service has been discontinued causing boost do_fetch to fail:
WARNING: boost-1.76.0-r0 do_fetch: Failed to fetch URL
https://dl.bintray.com/boostorg/release/1.75.0/source/boost_1_75_0.tar.bz2,
attempting MIRRORS if available
RP: Backport to 1.75.0 Signed-off-by: Stefan Ghinea <stefan.ghinea@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rootfs_update_timestamp is run, which assumes that rootfs/${sysconfdir}
is already created (usually done through the do_rootfs task on linux).
This causes the build to fail if ${sysconfdir} does not exist.
This may be overlooked if debug-tweaks is enabled since some other
commands are added, one of which creates the required path
(see postinst_enable_logging).
We've seen three hangs in cgroup_xattr and two in proc01 so far. The new
plan is just to disable any tests seen to hang. I've had enough of these
causing problems on our testing infrastructure.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tony Tascioglu [Thu, 20 May 2021 21:45:42 +0000 (17:45 -0400)]
libxml2: Fix CVE-2021-3541
Upstream commit:
This is related to parameter entities expansion and following
the line of the billion laugh attack. Somehow in that path the
counting of parameters was missed and the normal algorithm based
on entities "density" was useless.
This relies on an updated version of xinclude.c from upstream which
also adds several new tests. Those changes are brought in first so
that the CVE patch can be applied cleanly.
The first patch updates xinclude.c and adds the new tests from
upstream, and the second applies the fix for the CVE.
Tony Tascioglu [Fri, 14 May 2021 13:14:50 +0000 (09:14 -0400)]
libxml2: fix CVE-2021-3537
Parsing specially crafted Mixed Content while parsing XML data may
lead to invalid data structure being created, as errors were not
propagated. This could lead to several NULL Pointer Dereference when
post-validating documents parsed in recovery mode.
Bastian Krause [Wed, 12 May 2021 10:22:39 +0000 (12:22 +0200)]
ccache: add packageconfig docs option
Before, ccache's configure stage built HTML documentation and man pages
depending on if asciidoc is installed. This patch makes it configurable.
Pass the new cmake option ENABLE_DOCUMENTATION along and add the
asciidoc dependency if necessary.
This fixes an issue when ccache's configure stage found asciidoc/a2x on
the system outside of the sysroot (e.g. installed via 'apt install
asciidoc'). ccache would then decide to build docs and manual pages, but
would fail during compilation: the system's a2x could not find the
system's asciidoc because it did not reside in the set PATH.
By enabling/disabling docs/man page generation explicitly and adding
asciidoc to DEPENDS as necessary, this is no longer an issue.
[ This corresponds to commit b0aedd74 and parts of commit 1eedc5f8,
with the patch replaced by the upstream version. ]
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 14 May 2021 17:06:56 +0000 (18:06 +0100)]
sstate: Handle manifest 'corruption' issue
Under certain build patterns, warnings about missing manifests can appear. These
are real issues where the manifest was removed and shouldn't have been.
Martin Jansa was able to find a reproducer of:
MACHINE=qemux86 bitbake zlib-native
echo 'PR = "r1"' >> meta/recipes-core/zlib/zlib_1.2.11.bb
MACHINE=qemux86-64 bitbake zlib-native
MACHINE=qemux86 bitbake zlib-native
<the zlib-native manifest is now removed along with the sysroot-components contents>
The code maintains a per machine list of stamps but a per PACAGE_ARCH list of
stamp/manifest/workdir mappings. The latter is only appended to for speed with
the assumption that once stamps are gone, the code wouldn't trigger.
The code only ever appends to the mapping list (for speed/efficency under lock)
meaning that multiple entries can result where the stamp/workdir differs due to
version changes but the manifest remains the same.
By switching MACHINE part way through the build, the older stamp is referenced
and the manifest is incorrectly removed as it matches an now obsolete entry in
the mapping file.
There are two possible fixes, one is to rewrite the mapping file every time
which means adding regexs, iterating and generally complicating that code. The
second option is to only use the last mapping entry in the file for a given
manifest and ignore any earlier ones. This patch implments the latter.
Also drop the stale entries if we are rewriting it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ends up with one process growing to about the size of system memory
and triggering the OOM killer. This has been taking out other builds
running on the system on the autobuilders and is one cause of our
intermittent failures.
although other glibc tests appear to use 16GB of memory before failing
anyway. By capping the VM size to 8GB, we see the same number of failures
but no OOM situations. There may be some issue in qemu or the test which
could be improved to avoid this entirely but this provides a necessary
and useful safeguard to other builds and doensn't appear to make the
situation worse.
On a loaded system OOM may not occur as the test timeout may be triggered
first. An experiment with a 5GB limit showed an additional 7 failures.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 11 May 2021 13:13:08 +0000 (14:13 +0100)]
tiff: Exclude CVE-2015-7313 from cve-check
Some fix upstream addresses the issue, it isn't clear which change this was. Our
current version doesn't have issues with the test image though so we can exclude.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 10 May 2021 15:30:56 +0000 (16:30 +0100)]
jquery: Exclude CVE-2007-2379 from cve-check
The CVE is non-specific and depends on the users of jquery, doesn't
make sense to have this flagged against jquery as there is nothing we can
do about it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 10 May 2021 11:17:15 +0000 (12:17 +0100)]
qemu: Exclude CVE-2017-5957 from cve-check
The CVE applies to virglrender before 0.6.0 which we don't have.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 9b5355375d028577de0b98e05992de6a088cb972) Signed-off-by: Steve Sakoman <steve@sakoman.com>
These CVEs are disputed by upstream and there is no plan to fix/address them. No
other distros are carrying patches for them. There is a patch for 1010025
however it isn't merged upstream and probably carries more risk of other bugs
than not having it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
it is introduced by a commit to fix CVE. So remove option '-O2' from
CFLAGS rather than revert the commit to avoid the failure.
[YOCTO #14367]
CC: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 69805629b8f47fd46a37b7c5cc435982e2ac3d1d) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
libcap: Configure Make variables correctly without a horrible hack
Occasionally, the build would fail with:
make[2]: execvp: mkdir: Argument list too long
This turned out to be due to a hacky solution used in the recipe to
modify the Makefile, which resulted in one more $(BUILD_CFLAGS) being
added to the immediately expanded BUILD_CFLAGS Make variable each time
do_configure was executed. After a couple of times, this lead to an
environment with a 140 kB BUILD_CFLAGS when mkdir should execute, which
resulted in the E2BIG.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 116e6b61c585c6f0f7ae6f010bd490bb39914348) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
lttng-modules: backport patches to fix build against 5.12+ kernel
Add the following patches from stable-2.12 branch of lttng repository
to fix errors when building lttng-modules against 5.12+ kernel
since they are not present on the release 2.12.5:
- 17cd2dc9 fix: block: add a disk_uevent helper (v5.12)
- 127135b6 fix backport: block: add a disk_uevent helper (v5.12)
- 853d5903 fix: mm, tracing: kfree event name mismatching with
provider kmem (v5.12)
Signed-off-by: Vinicius Aquino <vinicius.aquino@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 2538ba2b3490e3599d9ccd637aa8486ea428f1b0) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Bruce Ashfield [Fri, 7 May 2021 16:22:57 +0000 (12:22 -0400)]
linux-yocto/5.4: qemuppc32: reduce serial shutdown issues
Integrating the following commit(s) to linux-yocto/5.4:
qemuppc32: reduce serial issues seen on shutdown
Richard reported:
We've been seeing a lot of the qemuppc shutdown issue and I decided to
look into it. The really worrying thing looking at the logs locally is the
serial ports are showing irq issues and becoming disabled as nobody would
handle them.
This is problematic as the shutdown test uses the serial interface to
shut down the system. If the serial interface fails to login or run the command,
game over for the test.
CONFIG_SERIAL_PMACZILOG_CONSOLE complicates that handling, but doesn't provide
any output or capabilities that we need. So we disable it here, and
reduce the chances of issues during shutdown.
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 42355cb73049ee7a4af0f539a2a5b7d4ee1abc65) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Richard Purdie [Sun, 9 May 2021 09:59:44 +0000 (10:59 +0100)]
oeqa/qemurunner: Improve handling of run_serial for shutdown commands
When running a shutdown command, the serial port can close without the
command returning. This is seen as the socket being readable but having
no data. Change the way this case is handled in the code to avoid
tracebacks.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 396a3ba884820d040c91f7592daf20ac28c49b5d) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Richard Purdie [Fri, 7 May 2021 17:12:15 +0000 (18:12 +0100)]
oeqa/qemurunner: Fix binary vs str issue
The recent logging changes for qemurunner showed up as errors on the
autobuilder where decode couldn't be called on the returned string.
Since the code returns binary data, return b'' instead of '' to match
to avoid tracebacks.
One of these cases was newly added, copied from the other which has
been there for a long time, always broken.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit b8995b27db265b0a0b2d2ca595915f70f9f96e07) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Richard Purdie [Wed, 5 May 2021 18:15:29 +0000 (19:15 +0100)]
oeqa/qemurunner: Improve logging thread exit handling for qemu shutdown test
Rather than totally disabling the logging, inform it we're about to exit
so we can log messages over the exit cleanly too. This aids debugging. It
also avoids a race where the logging handler could still error whilst
shutting down.
Also remove a race window by notificing the handler of the shutdown
first, before triggering it. This removes a race window I watched in
local testing.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 0e19f31a1005f94105e1cef252abfffcef2aafad) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
sanity.bbclass: mention CONNECTIVITY_CHECK_URIS in network failure message
This expands the error message when a network failure is detected.
It happens that some ISPs or networks block the default example.com
domain. Therefore, instead of disabling network access, it
lets the user know how to modify the test URL.
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 62c94bb925543c1e1c5af3c751913d9f06d9597d) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Yi Fan Yu [Fri, 23 Apr 2021 14:59:53 +0000 (10:59 -0400)]
libevent: Increase ptest timing tolerance 50 ms -> 100 ms
Adjusting the tolerance to a more reasonable time
given the load on the AB and given the high amount(100) of
events some of the tests like `common_timeout` generates.
[YOCTO #14163]
Signed-off-by: Yi Fan Yu <yifan.yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 38b36d2b90d570149e63816e68f457aea28a5092) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Joshua Watt [Wed, 5 May 2021 21:40:06 +0000 (16:40 -0500)]
classes/image: Use xargs to set file timestamps
Instead of having find directly invoke touch for each file in the root
file system, pass a list to xargs for batching. This significantly
reduces the number of times the touch program is invoked and speeds up
the do_image task time:
Bruce Ashfield [Thu, 6 May 2021 12:57:21 +0000 (08:57 -0400)]
linux-yocto/5.10: qemuppc32: reduce serial shutdown issues
Integrating the following commit(s) to linux-yocto/5.10:
qemuppc32: reduce serial issues seen on shutdown
Richard reported:
We've been seeing a lot of the qemuppc shutdown issue and I decided to
look into it. The really worrying thing looking at the logs locally is the
serial ports are showing irq issues and becoming disabled as nobody would
handle them.
This is problematic as the shutdown test uses the serial interface to
shut down the system. If the serial interface fails to login or run the command,
game over for the test.
CONFIG_SERIAL_PMACZILOG_CONSOLE complicates that handling, but doesn't provide
any output or capabilities that we need. So we disable it here, and
reduce the chances of issues during shutdown.
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit bf2c6ea03d45742597275691b4c883044765c57e) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Richard Purdie [Wed, 5 May 2021 21:13:10 +0000 (22:13 +0100)]
lib/package_manager: Use shutil.copy instead of bb.utils.copyfile for intercepts
If the scripts/postinst-intercepts is owned by root/root then the copyfile() calls
will fail due to chown issues. We don't care about ownership of these files so
use shutil.copy() instead which won't perform any chown.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 1a03c70c282b3445b93a4c70ea6d40a1778750c5) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Revert "oeqa: Set LD_LIBRARY_PATH when executing native commands"
LD_LIBRARY_PATH leaks into host executables too, and breaks them
as they are not uninative-enabled. E.g. on ubuntu 18.04 trying
to run host bash with a sysroot that was built on Fedora 33:
akanavin@ubuntu1804-ty-3:/home/pokybuild/yocto-worker/oe-selftest-ubuntu/build/build-st-24341/tmp/work/x86_64-linux/gnupg-native/2.3.1-r0/recipe-sysroot-native$ LD_LIBRARY_PATH=./usr/lib /bin/bash
/bin/bash: ./usr/lib/libtinfo.so.5: no version information available (required by /bin/bash)
/bin/bash: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by ./usr/lib/libtinfo.so.5)
This was seen e.g. here:
https://autobuilder.yoctoproject.org/typhoon/#/builders/87/builds/2090/steps/14/logs/stdio
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 0e9850486b74a3de934527ca1077df001d3a8d22) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Ross Burton [Tue, 4 May 2021 12:57:40 +0000 (13:57 +0100)]
oe-buildenv-internal: add BitBake's library to PYTHONPATH
There are many Python scripts in oe-core that want to use Tinfoil, and
right now they have to know where they are to work out where BitBake is
likely to be.
This is suboptimal as BitBake could be somewhere else, so this
approach doesn't scale to other layers at all.
Solve this by adding BITBAKEDIR/lib to PYTHONPATH in oe-buildenv-internal,
so that Python has BitBake on its search path once the build system is
configured.
Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit a48178f6d00e7f97a09f42d5a164204e9dcffa9f) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Bruce Ashfield [Mon, 3 May 2021 12:54:33 +0000 (08:54 -0400)]
linux-yocto/5.4: update to v5.4.116
Updating linux-yocto/5.4 to the latest korg -stable release that comprises
the following commits:
370636ffbb86 Linux 5.4.116 e23967af130b bpf: Update selftests to reflect new error states ef4e68f0af04 bpf: Tighten speculative pointer arithmetic mask 4dc6e55e282f bpf: Move sanitize_val_alu out of op switch 876d1cec9369 bpf: Refactor and streamline bounds check into helper 4158e5fea3b1 bpf: Improve verifier error messages for users 15de0c537bf7 bpf: Rework ptr_limit into alu_limit and add common error path f7fbedc90909 bpf: Ensure off_reg has no mixed signed bounds for all types 4a163b1c7053 bpf: Move off_reg into sanitize_ptr_alu 19bfeb47e96b Linux 5.4.115 af7099bad495 USB: CDC-ACM: fix poison/unpoison imbalance d7fad2ce15bd net: hso: fix NULL-deref on disconnect regression 699017fe0de4 x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access b3962b4e8334 ia64: tools: remove duplicate definition of ia64_mf() on ia64 763cbe5e1ebb ia64: fix discontig.c section mismatches 3dce9c4bb546 csky: change a Kconfig symbol name to fix e1000 build error 892f6bc55746 cavium/liquidio: Fix duplicate argument 2ccca124620e xen-netback: Check for hotplug-status existence before watching 78687d6a3213 s390/entry: save the caller of psw_idle 026490fac496 net: geneve: check skb is large enough for IPv4/IPv6 header caaf9371ecad ARM: dts: Fix swapped mmc order for omap3 be60afbb9136 HID: wacom: Assign boolean values to a bool variable 116ee59ef886 HID: alps: fix error return code in alps_input_configured() a4e2b91cea52 HID: google: add don USB id aefb6ac6ac11 perf auxtrace: Fix potential NULL pointer dereference 39638289595b perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[] 319a06e58ed7 perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3 82808cc02681 locking/qrwlock: Fix ordering in queued_write_lock_slowpath() c6eb92b37af1 arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS 37ee803d7ed7 pinctrl: lewisburg: Update number of pins in community dbb355960ef9 gpio: omap: Save and restore sysconfig 835c8d688e1e s390/ptrace: return -ENOSYS when invalid syscall is supplied
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 667352cc46429f3d8eca12cf93c26be2d26e5d74) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Bruce Ashfield [Mon, 3 May 2021 12:54:32 +0000 (08:54 -0400)]
linux-yocto/5.10: update to v5.10.34
Updating linux-yocto/5.10 to the latest korg -stable release that comprises
the following commits:
0aa66717f684 Linux 5.10.34 47d54b990103 mei: me: add Alder Lake P device id. 2a442f11407e iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_gen2_enqueue_hcmd() 8bd8301ccc11 Linux 5.10.33 8a661bad6cee USB: CDC-ACM: fix poison/unpoison imbalance 90642ee9eb58 net: hso: fix NULL-deref on disconnect regression 31720f9e87c0 x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access bed21bed2e79 ia64: tools: remove duplicate definition of ia64_mf() on ia64 ba0910ad1c57 ia64: fix discontig.c section mismatches f4a777bcc8d1 csky: change a Kconfig symbol name to fix e1000 build error 393200a1b095 kasan: fix hwasan build for gcc f2b46286e326 cavium/liquidio: Fix duplicate argument 1bfefd866195 xen-netback: Check for hotplug-status existence before watching 509ae27a1874 arm64: kprobes: Restore local irqflag if kprobes is cancelled da99331fc6ce s390/entry: save the caller of psw_idle d33031a894d2 dmaengine: tegra20: Fix runtime PM imbalance on error 66d0cf7dcaa1 net: geneve: check skb is large enough for IPv4/IPv6 header 6ce64437224d ARM: dts: Fix swapped mmc order for omap3 db010ba54a96 dmaengine: xilinx: dpdma: Fix race condition in done IRQ e8d9a93ec46e dmaengine: xilinx: dpdma: Fix descriptor issuing on video group eb2c81ee764d soc: qcom: geni: shield geni_icc_get() for ACPI boot 8c4bfe30eb55 HID: wacom: Assign boolean values to a bool variable e913cbc952c3 HID cp2112: fix support for multiple gpiochips f691dc86411d HID: alps: fix error return code in alps_input_configured() 079e32723f78 HID: google: add don USB id ffe249b4fc2c perf map: Fix error return code in maps__clone() 4d0cfb3713bc perf auxtrace: Fix potential NULL pointer dereference ab112cc573cc perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[] 6f8315e5d951 perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3 82fa9ced35d8 locking/qrwlock: Fix ordering in queued_write_lock_slowpath() b642e493a9a0 bpf: Tighten speculative pointer arithmetic mask 2982ea926b5c bpf: Refactor and streamline bounds check into helper f3c4b01689d3 bpf: Allow variable-offset stack access f79efcb0075a bpf: Permits pointers on stack for helper calls edc5d1601389 arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS 83d93d05376a pinctrl: core: Show pin numbers for the controllers with base = 0 fc2454cc0c4b block: return -EBUSY when there are open partitions in blkdev_reread_part 2bbd8aafde36 pinctrl: lewisburg: Update number of pins in community a8cd07e4400d vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails bf84ef2dd2cc KEYS: trusted: Fix TPM reservation for seal/unseal 9857fccd653c gpio: omap: Save and restore sysconfig 71777492b745 vhost-vdpa: protect concurrent access to vhost device iotlb
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 2cfc4489c14f8d1ec2c6fc2aa411d158058f5aea) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Bruce Ashfield [Mon, 3 May 2021 12:54:29 +0000 (08:54 -0400)]
linux-yocto/5.10: update to v5.10.32
Updating linux-yocto/5.10 to the latest korg -stable release that comprises
the following commits:
aea70bd5a455 Linux 5.10.32 6ac98ee9cb7c net: phy: marvell: fix detection of PHY on Topaz switches fbe6603e7cab bpf: Move sanitize_val_alu out of op switch 7723d3243857 bpf: Improve verifier error messages for users 55565c307908 bpf: Rework ptr_limit into alu_limit and add common error path 496e2fabbbe3 arm64: mte: Ensure TIF_MTE_ASYNC_FAULT is set atomically cada2ed0bb70 ARM: 9071/1: uprobes: Don't hook on thumb instructions 480d875f1242 bpf: Move off_reg into sanitize_ptr_alu 589fd9684dfa bpf: Ensure off_reg has no mixed signed bounds for all types b2df20c0f19f r8169: don't advertise pause in jumbo mode 154fb9cb3e6f r8169: tweak max read request size for newer chips also in jumbo mtu mode 7f64753835a7 KVM: VMX: Don't use vcpu->run->internal.ndata as an array index c670ff84fac9 KVM: VMX: Convert vcpu_vmx.exit_reason to a union 4f3ff11204ea bpf: Use correct permission flag for mixed signed bounds arithmetic 8d7906c548aa arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference 286c39d08664 arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems 4f90db2e92d2 ARM: OMAP2+: Fix uninitialized sr_inst 1fc087fdb98d ARM: footbridge: fix PCI interrupt mapping 11a718ef953f ARM: 9069/1: NOMMU: Fix conversion for_each_membock() to for_each_mem_range() a13d4a1228ab ARM: OMAP2+: Fix warning for omap_init_time_of() 9143158a6bd3 gro: ensure frag0 meets IP header alignment fd766f792a56 ch_ktls: do not send snd_una update to TCB in middle 65bdd564b387 ch_ktls: tcb close causes tls connection failure 5f3c278035c0 ch_ktls: fix device connection close 8d5a9dbd2116 ch_ktls: Fix kernel panic 976da1b08784 ibmvnic: remove duplicate napi_schedule call in open function 008885a880dc ibmvnic: remove duplicate napi_schedule call in do_reset function 685bc730e3a9 ibmvnic: avoid calling napi_disable() twice e154b5060aa1 ia64: tools: remove inclusion of ia64-specific version of errno.h header f8f01fc8c653 ia64: remove duplicate entries in generic_defconfig 1aec111c944f ethtool: pause: make sure we init driver stats 44ef38c0a2b3 i40e: fix the panic when running bpf in xdpdrv mode 35d7491e2f77 net: Make tcp_allowed_congestion_control readonly in non-init netns 76af8126a6e4 mm: ptdump: fix build failure 33f3dab42ae2 net: ip6_tunnel: Unregister catch-all devices ea0340e632ba net: sit: Unregister catch-all devices 154ac84d497a net: davicom: Fix regulator not turned off on failed probe e072247938a8 net/mlx5e: Fix setting of RS FEC mode dc1732baa9da netfilter: nft_limit: avoid possible divide error in nft_limit_init cda5507d234f net/mlx5e: fix ingress_ifindex check in mlx5e_flower_parse_meta 40ed1d29f151 net: macb: fix the restore of cmp registers 7f8e59c4c5e5 libbpf: Fix potential NULL pointer dereference 7824d5a9935a netfilter: arp_tables: add pre_exit hook for table unregister 4d26865974fb netfilter: bridge: add pre_exit hooks for ebtable unregistration eb82199e377a libnvdimm/region: Fix nvdimm_has_flush() to handle ND_REGION_ASYNC a2af8a0f38e4 ice: Fix potential infinite loop when using u8 loop counter 783645e65b57 netfilter: conntrack: do not print icmpv6 as unknown via /proc 394c81e36e49 netfilter: flowtable: fix NAT IPv6 offload mangling be07581aacae ixgbe: fix unbalanced device enable/disable in suspend/resume 0ef9919a06a3 scsi: libsas: Reset num_scatter if libata marks qc as NODATA 6a70ab9769cd riscv: Fix spelling mistake "SPARSEMEM" to "SPARSMEM" f66d695c06f4 vfio/pci: Add missing range check in vfio_pci_mmap e6177990e17d arm64: alternatives: Move length validation in alternative_{insn, endif} e2931f05eb32 arm64: fix inline asm in load_unaligned_zeropad() 957f83a138f1 readdir: make sure to verify directory entry for legacy interfaces too 2b8308741cf5 dm verity fec: fix misaligned RS roots IO 18ba387261ea HID: wacom: set EV_KEY and EV_ABS only for non-HID_GENERIC type of devices dedf75aec8fc Input: i8042 - fix Pegatron C15B ID entry 8b978750dcd2 Input: s6sy761 - fix coordinate read bit shift 955da2b5cd98 lib: fix kconfig dependency on ARCH_WANT_FRAME_POINTERS 024f9d048000 virt_wifi: Return micros for BSS TSF values cc413b375c6d mac80211: clear sta->fast_rx when STA removed from 4-addr VLAN 2e08d9a56838 pcnet32: Use pci_resource_len to validate PCI resource 248b9b61b951 net: ieee802154: forbid monitor for add llsec seclevel b97c7bc42d8d net: ieee802154: stop dump llsec seclevels for monitors ab9f9a1d5874 net: ieee802154: forbid monitor for del llsec devkey 4846c2debb2c net: ieee802154: forbid monitor for add llsec devkey 07714229e0e2 net: ieee802154: stop dump llsec devkeys for monitors 4c1775d6ea86 net: ieee802154: forbid monitor for del llsec dev 813b13155d14 net: ieee802154: forbid monitor for add llsec dev 2f80452951b5 net: ieee802154: stop dump llsec devs for monitors 08744a622faa net: ieee802154: forbid monitor for del llsec key 7edf4d2baa8a net: ieee802154: forbid monitor for add llsec key c09075df5e4d net: ieee802154: stop dump llsec keys for monitors 8b9485b651d4 iwlwifi: add support for Qu with AX201 device c836374bacfa scsi: scsi_transport_srp: Don't block target in SRP_PORT_LOST state d9fc084067f5 ASoC: fsl_esai: Fix TDM slot setup for I2S mode 79ef0e6c0cf8 drm/msm: Fix a5xx/a6xx timestamps d61238aa6482 ARM: omap1: fix building with clang IAS 505c48942f04 ARM: keystone: fix integer overflow warning 0d0ad98bee39 neighbour: Disregard DEAD dst in neigh_update 7a1cd9044da4 gpu/xen: Fix a use after free in xen_drm_drv_init bfb5a1523f17 ASoC: max98373: Added 30ms turn on/off time delay 58d59d9ae56f ASoC: max98373: Changed amp shutdown register as volatile b2f8476193eb xfrm: BEET mode doesn't support fragments for inner packets 806addaf8dfd iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_enqueue_hcmd() b448a6a2fc5a arc: kernel: Return -EFAULT if copy_to_user() fails f12e8cf6b180 lockdep: Add a missing initialization hint to the "INFO: Trying to register non-static key" message a55de4f0d1d4 ARM: dts: Fix moving mmc devices with aliases for omap4 & 5 9f399a9d7006 ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race f338b8fffd75 ACPI: x86: Call acpi_boot_table_init() after acpi_table_upgrade() e5eb9757fe4c dmaengine: idxd: fix wq cleanup of WQCFG registers 4c59c5c8668e dmaengine: plx_dma: add a missing put_device() on error path ac030f5c5680 dmaengine: Fix a double free in dma_async_device_register 56f9c04893fb dmaengine: dw: Make it dependent to HAS_IOMEM 4ecf25595273 dmaengine: idxd: fix wq size store permission state db23b7b5ca3e dmaengine: idxd: fix opcap sysfs attribute output 0e3f14755111 dmaengine: idxd: fix delta_rec and crc size field for completion record a5ad12d5d69c dmaengine: idxd: Fix clobbering of SWERR overflow bit on writeback f567fde02baa gpio: sysfs: Obey valid_mask dfed481e62e5 Input: nspire-keypad - enable interrupts only when opened b80ea54e1e71 mtd: rawnand: mtk: Fix WAITRDY break condition and timeout 5a627026be4a net/sctp: fix race condition in sctp_destroy_sock 65f1995ea1e9 Linux 5.10.31 ceee49ca34bf xen/events: fix setting irq affinity 9d9facd32d89 net: sfp: cope with SFPs that set both LOS normal and LOS inverted 2a60ab2dab3d net: sfp: relax bitrate-derived mode check cd8ce27e6caa perf map: Tighten snprintf() string precision to pass gcc check on some 32-bit arches 1f3b9000cb44 netfilter: x_tables: fix compat match/target pad out-of-bound write 5402a67ac403 block: don't ignore REQ_NOWAIT for direct IO efa7b6e4017a riscv,entry: fix misaligned base for excp_vect_table 6fbdce3cde97 io_uring: don't mark S_ISBLK async work as unbounded 5d4600017bee null_blk: fix command timeout completion handling b1f6c6f39bd6 idr test suite: Create anchor before launching throbber 9a7552daa93b idr test suite: Take RCU read lock in idr_find_test_1 edd822b69241 radix tree test suite: Register the main thread with the RCU library 1d2310d95fb8 block: only update parent bi_status when bio fail d99e22c0ea74 XArray: Fix splitting to non-zero orders 9576dd89554e gpu: host1x: Use different lock classes for each client 39af2f472f21 drm/tegra: dc: Don't set PLL clock to 0Hz e4a0956574c7 tools/kvm_stat: Add restart delay 1dcb3ebc2416 ftrace: Check if pages were allocated before calling free_pages() 6c6d58322079 gfs2: report "already frozen/thawed" errors 870c8df1d192 drm/imx: imx-ldb: fix out of bounds array access warning 5b50468a2d4d KVM: arm64: Disable guest access to trace filter controls fa0c0dce589d KVM: arm64: Hide system instruction access to Trace registers 57fb08fb9a25 gfs2: Flag a withdraw if init_threads() fails 9b57ecb01b43 interconnect: core: fix error return code of icc_link_destroy()
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 91fcd094619e25d63a80231c3b776788504ce37b) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Bruce Ashfield [Mon, 3 May 2021 12:54:27 +0000 (08:54 -0400)]
linux-yocto/5.10: aufs fixes
It was reported that aufs was behaving incorrectly on arm/x86. Although
we don't have an exact fix for the issues, the Wind River guys were able
to come up with a minimal patch set to fix just the core issue, versus
a full aufs uprev.
We didn't have time to get this in before the release, but picking it up
in a dot release is sufficient. (given that it took several months for
the issue to be noticed).
Integrating the following commit(s) to linux-yocto/5.10:
a8808e541750 aufs: linux-v5.10-rc1, no more f_op->read() and ->write() cb1c41dac775 for aufs: linux-v5.10-rc1, no more vfs_(read|write)f_t a5805df6583f aufs: linux-v5.10-rc1, no more set_fs() 64e145dcca8c Revert "aufs: initial port to v5.10"
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit c290adec4e27f5d7987193e9a0749082f3ed3e20) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
rootfs.py: find .ko.gz and .ko.xz kernel modules as well
* with xz PACKAGECONFIG enabled in kmod and xz module compression enabled in kernel
the do_rootfs task doesn't run depmod in the image, because it thinks there are no modules:
NOTE: No Kernel Modules found, not running depmod
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Christophe Chapuis <chris.chapuis@gmail.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 9c13ce05eae0f126eb150e48709e9bd06e9280fa) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Richard Purdie [Sat, 1 May 2021 11:25:55 +0000 (12:25 +0100)]
pybootchart/draw: Avoid divide by zero error
When disk stats don't run frequenctly enough, we see divide by zero
errors. The code already has a fallback path so ensure we use it
for this case too.
[YOCTO #14360]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit b71d30aef5dc2c360432c0dd4147859dd303ea48) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Richard Purdie [Sat, 1 May 2021 16:10:21 +0000 (17:10 +0100)]
patchelf: Fix note section alignment issues
Improve note section normalization was added to patchelf in recent versions
however if fails if there are two note sections which aren't sized to match
section alignment. Tweak the code to account for section alignment.
This fixes patchelf failures on the autobuilder, particularly to ccache-native.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit fee8dde0d597b511b37d8dcf215e8355980d5f2b) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
The wayland.c actually include 'xdg-shell-client-protocol.h' instead of
the server one, so fix it. Otherwise, it's possible to get build failure
due to race condition.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit bd2a9a4d82f66f1ff414c392bcf234d8dbd5e553) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
meta/lib/oeqa/core/tests/cases/timeout.py: add a testcase for the previous fix
This is the sequence that didn't properly operate:
- a test case that skips and isn't executed
- a second test case that is skipped via a dependency decorator, and sets a timeout
- a third test case that takes longer than the timeout from the second
test case
Without the fix, the timeout is not cleared, and the third test case is
erroneously aborted. With the fix, the timeout is cleared and the third
test case is able to complete.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 54ef07a9aa1af8f41cfb9a4802929c918efc43c8) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
oeqa: tear down oeqa decorators if one of them raises an exception in setup
Some of the decorators need proper cleanup, such as OETimeout
which sets a signal handler that needs to be cleared via teardown.
If this is not done then the signal gets called later with unpredictable effects.
This can be seen if there's a test that is skipped via a decorator and sets a timeout
at the same time: the timeout isn't cleared, and is invoked later in a
completely unrelated context. The test case for this is added in the
next commit.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit f42a08e1aabf1ca57e0c09d69fb69cc717c7f156) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Kai Kang [Fri, 23 Apr 2021 03:29:03 +0000 (11:29 +0800)]
cmake.bbclass: remove ${B} before cmake_do_configure
It is fallible to remove ${B} in directory ${B} itself. And it does fail
when call bitbake by third-party wrapper script.
Use flag 'cleandirs' to remove ${B} first if build out of source tree.
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 0fb6280432a36985590d9a714a5f11164aaebb51) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Kai Kang [Fri, 23 Apr 2021 03:29:04 +0000 (11:29 +0800)]
kernel-yocto.bbclass: chdir to ${WORKDIR} for do_kernel_checkout
It chdirs to ${S} at the beginning of task do_kernel_checkout. Then it
removes ${S} when it still resides in ${S}. It may fail to run the task
do_kernel_checkout when bitbake is called by third-part wrapper script.
So chdir to ${WORKDIR} by default for do_kernel_checkout. And it will
chdir to ${S} afterwards in task do_kernel_checkout.
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit cf0e3397d3f86c7ea1f3c66c50a44d6205f5921b) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Richard Purdie [Sat, 24 Apr 2021 14:23:54 +0000 (15:23 +0100)]
yocto-check-layer: Avoid bug when iterating and autoadding dependencies
If iterating a layer with multiple components and auto-adding dependencies
the tests can break since layers are never removed and order isn't guaranteed
to account for that.
Fix this by resetting the layer list back to the original list each time
before auto-adding the dependencies in each case.
This fixes scanning of meta-openembedded in particular where the sublayers
may not be added in order of minimal dependency.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit bf1b467dacf345379cd5d84a1c9b3b0d844d5c91) Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
