André Draszik [Wed, 19 Sep 2018 13:35:49 +0000 (14:35 +0100)]
libsdl2: avoid basehash changes
When adding meta-freescale, the sstate basehash of libsdl2 changes
because EXTRA_OECONF_IMX is appended to EXTRA_OECONF unconditionally,
causing EXTRA_OECONF to now depend on EXTRA_OECONF_IMX, invalidating
the sstate.
This is particularly annoying for the native flavour of this
recipe, because qemu-native depends on libsdl2-native, causing a
massive rebuild of a lot of packages for no good reason, preventing
efficient sstate re-use across different machines.
Just drop EXTRA_OECONF_IMX and append to EXTRA_OECONF using
variable overrides directly.
Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Andreas Müller [Fri, 14 Sep 2018 09:48:50 +0000 (11:48 +0200)]
linux-fslc/defconfig: CONFIG_BT_BNEP=m
This is necessary to support network over bluetooth:
| Sep 11 15:36:33 imx6qdl-variscite-som bluetoothd[281]: kernel lacks bnep-protocol support
| Sep 11 15:36:33 imx6qdl-variscite-som bluetoothd[281]: System does not support network plugin
Andreas Müller [Fri, 14 Sep 2018 09:48:49 +0000 (11:48 +0200)]
linux-fslc/defconfig: Add CONFIG_NET_NS=y
systemd in default oe-core configuration complains:
| Sep 11 15:36:33 imx6qdl-variscite-som systemd[1]: Starting Hostname Service...
| Sep 11 15:36:33 imx6qdl-variscite-som systemd[296]: systemd-hostnamed.service: PrivateNetwork=yes is configured, but the kernel does not support network namespaces, ignorin>
Otavio Salvador [Sat, 15 Sep 2018 14:00:05 +0000 (11:00 -0300)]
u-boot-fslc: Upgrade to 2018.09-based fork
This updates the fork to current 2018.09 release and apply following
changes on top:
62f2841dc4 pico-imx6ul: Add instructions for booting in Falcon mode a803c01c03 pico-imx6ul: Add Falcon mode support 3e5f58a2a4 wandboard: README: Include the mx6qp variant in the list 28b8458749 imx: imx6ull: fix pinmux input_val for uart5 rx pin 1bc802f9cc pico-imx6ul: Remove CONFIG_FSL_USDHC from .h cc97092f7c pico-imx6ul: Add new pico-hobbit config 11aaa94cd8 pico-imx6ul: Sync README with pico-imx7d 52723c960f pico-imx6ul: Improve default DFU settings c90fa9c1a2 pico-imx6ul: Add bootmenu to choose the baseboard 2141bc7952 pico-imx6ul: Sync defconfig with new changes 9ff1d5305d pico-imx6ul: Update the README file 2b0e81461c pico-imx6ul: Add support for the 512MB module e45ab0b309 pico-imx6ul: Add bmode support ad3c1b13d8 pico-imx6ul: Add fastboot support fa2c10bbac pico-imx6ul: Convert to SPL b143e3f027 pico-imx6ul: Convert to distro config a9c45f15b2 mx6sabre_common: Allow the videoargs to be passed to bootargs b584b845b1 mx25pdk: Change root to use a single partition layout 146e490814 mx6sabre_common: Dynamically change the video output a278950282 mx6sabresd: Enable video interfaces in bootargs 77cac8a16e mx6sabresd: Use LDO dtb file until LDO bypass support is added be4d1c4100 mx6slevk: Use LDO dtb file until LDO bypass support is added
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Otavio Salvador [Wed, 12 Sep 2018 12:41:09 +0000 (09:41 -0300)]
wayland-protocols: Avoid recipe parsing for foreign machines
This restricts the parsing for machines which has either imxgpu or
imxfbdev SoC features.
Fixes: contamination of other BSP machines Reported-by: Andreas Müller <schnitzeltony@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Yuqing Zhu [Mon, 6 Aug 2018 09:23:30 +0000 (17:23 +0800)]
gstreamer1.0: Upgrade to v1.14.imx
Bugfix/Optimization:
baseparse: Handle base parse error.
baseparse: Unset FLAG_DISCONT when push to adapter.
Or the DISCONT flag will always be set on each frame,
for the first chain in buffer.
baseparse: Push adapter remainning data in
pass through mode to avoid missing data.
poll: Need check if can read event of buffer
for video decoder based on V4L2 driver.
Add the API for it.
inputselector: Proceed non-active pad buffer even if active pad reach eos
Non-active pad will be blocked if active pad reach eos in
inputselector, which will cause all pipeline be blocked.
Inputselector should proceed non-active pad buffer based
on clock even if active pad reach eos.
Change to sync with clock for better user experience.
Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[220]: Failed to apply ACL on /dev/v4l-subdev0: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[224]: Failed to apply ACL on /dev/v4l-subdev1: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[215]: Failed to apply ACL on /dev/v4l-subdev10: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[228]: Failed to apply ACL on /dev/v4l-subdev2: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[232]: Failed to apply ACL on /dev/v4l-subdev5: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[217]: Failed to apply ACL on /dev/v4l-subdev11: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[214]: Failed to apply ACL on /dev/dri/card1: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[216]: Failed to apply ACL on /dev/v4l-subdev8: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[226]: Failed to apply ACL on /dev/v4l-subdev9: Operation not supported
and nasty follow-ups: Starting weston from sddm as unpriviledged user fails
with some hints on missing access rights.
For a better understanding CONFIG_TMPFS=y was added which was set indirectly
by CONFIG_DEVTMPFS=y
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Marc Ferland [Mon, 6 Aug 2018 19:18:25 +0000 (15:18 -0400)]
linux-mfgtool: Simplify linux-mfgtool support
As OpenEmbedded-Core now supports (from commit 5b4aab6b40cf21471442e21abc8051b38985de84) building multiple kernels,
this patch completly replaces the old linux-mfgtool with a single
statement:
KERNEL_PACKAGE_NAME = "linux-mfgtool"
and it works surprisingly well! This patch also provides a separate
defconfig for linux-imx-mfgtool (which currently is a copy of
linux-imx defconfig).
Note: The linux-mfgtool kernel will be deployed in ${DEPLOY}/mfgtool.
Signed-off-by: Marc Ferland <ferlandm@amotus.ca> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Daiane Angolini [Thu, 23 Aug 2018 19:26:10 +0000 (16:26 -0300)]
imx-alsa-plugins: Make imx7ulp a compatible machine
>From [1] we know the imx-alsa-plugins_1.0.26 does support all imx7, and
it is defined in the BSP as MACHINE_EXTRA_RRECOMMENDS, so this patch add
imx7ulp as compatible.
It also fixes the following error (when building for imx7ulpevk):
ERROR: Nothing RPROVIDES 'imx-alsa-plugins' (but
/home/daiane/code/yocto/master/sources/poky/meta/recipes-core/images/core-image-base.bb,
/home/daiane/code/yocto/master/sources/poky/meta/recipes-core/packagegroups/packagegroup-base.bb
RDEPENDS on or otherwise requires it)
imx-alsa-plugins was skipped: incompatible with machine imx7ulpevk (not
in COMPATIBLE_MACHINE)
Tom Hochstein [Fri, 27 Jul 2018 18:37:04 +0000 (13:37 -0500)]
imx-vpu-hantro: Update to 1.7.0
- Vp9: rectify the consumed length for error return
- MJPEG: bug fixing in trickmode
- H264: bug fixing for special clip containing invalid syntax value
- RV: limit the HW read pointer in valid range
- Common: Export setinfo() API in codec.h
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The recipe explicitly sets a conflict between the two packages libgl-imx
and libgl-mesa with some python magic, so one shouldn't RDEPEND on the other.
e.g. when building the SDK most -dev packages are missing and one gets:
| Problem: package libgl-imx-dev-1:6.2.4.p1.2+aarch32-r0.armv7at2hf_neon_mx6qdl requires libgl-mesa-dev, but none of the providers can be installed
| - package libgl-mesa-dev-2:18.1.3-r0.armv7at2hf_neon_mx6qdl conflicts with libgl-dev provided by libgl-imx-dev-1:6.2.4.p1.2+aarch32-r0.armv7at2hf_neon_mx6qdl
| - conflicting requests
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Max Krummenacher [Mon, 23 Jul 2018 20:13:19 +0000 (22:13 +0200)]
dtc-145: Deploy renamed binary only and add new class
dtc-145-native is used by older U-Boot recipes. U-Boot only depends on
the native dtc binary. So, to not clash with files from the regular dtc native
build do only install the dtc binary renamed to dtc-145. Also, create
a new class to handle with dtc-145 dependency.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
