Since rpm-build requires perl, this caused a number of build failures
when the rpm-build package was attempted to be used since it references
/usr/bin/perl. This commit restores the previous contents of the rpm
package.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jacob Kroon [Sun, 27 Oct 2013 09:20:29 +0000 (10:20 +0100)]
update-rc.d.bbclass: Fix host/target test in postinst
When running the postinst script I get a shell warning:
sh: argument expected
and the service is never stopped. This patch fixes the warning
message and stops the service.
Patch v2: Hans Beckérus pointed out that the patch is not correct.
This version uses the syntax proposed by Hans. I've tested
that the postinst script works correctly when run on the target,
both when the init script exists and when it doesn't exist.
Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Roy Li [Tue, 29 Oct 2013 04:54:03 +0000 (12:54 +0800)]
pseudo: fix library path in FILES_${PN}
libpseudo.so is always installed into ${prefix}/lib/, not ${libdir},
so fix these paths; and skip libdir WARN_QA checking to ignore the
warning in 64bit and multilib enabled system
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Laurentiu Palcu [Mon, 28 Oct 2013 20:46:20 +0000 (22:46 +0200)]
nativesdk-qt4-tools: create qt.conf file
When installing the SDK to another location than the default one, qmake
will look for libraries, headers, etc. in the default location. That's
because the paths are hard-coded in the binary itself. Luckily, QT
allows to override this using a qt.conf file installed in the same
directory with the application executable. However, we already have a
patch that allows for the installation of qt.conf in another place and
read the location from QT_CONF_PATH environment variable.
Hence, install qt.conf in ${sysconfdir}. This will allow other apps, that
use QLibraryInfo class, to find it.
[YOCTO #5339]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 28 Oct 2013 17:52:31 +0000 (17:52 +0000)]
xorg-proto-common: set UNKNOWN_CONFIGURE_WHITELIST
This include adds configure options globally but not all X libraries support
them, so to avoid unknown-configure-option warnings add them to the whitelist.
Also change the options from --enable-foo=no to --disable-foo as they're clearer
and the whitelist would have to contain --enable-foo.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 28 Oct 2013 14:33:15 +0000 (14:33 +0000)]
xorg-lib-common: set UNKNOWN_CONFIGURE_WHITELIST
This include adds configure options globally but not all X libraries support
them, so to avoid unknown-configure-option warnings add them to the whitelist.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Fri, 18 Oct 2013 14:19:58 +0000 (15:19 +0100)]
scripts/oe-pkgdata-util: improve help text and command line parsing
* Use optparse to parse command line
* Make help text actually helpful by describing what each command does
* Drop comment at the top listing the commands which is now superfluous
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Paul Eggleton [Fri, 18 Oct 2013 11:08:26 +0000 (12:08 +0100)]
scripts/oe-pkgdata-util: remove remnants of former pkgdata structure
OE-Core commit 1b8e4abd2d9c0901d38d89d0f944fe1ffd019379 removed the
vendor-os argument from the command line, and the code using the package
architectures, so clean these items up.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Qiang Chen [Fri, 25 Oct 2013 06:49:11 +0000 (14:49 +0800)]
nfs-utils: nfsserver restart should kill and recreate nfsd kernel threads
nfsserver restart without killing kernel threads worked when portmap
was the rpc publishing process and portmap was restarted.
When rpcbind replaces portmap, nfsserver restart in this way does not
work after an rpcbind restart.
Steps to reproduce:
1). Make ext3 filesystem image on local host.
cd /root
dd if=/dev/zero of=test bs=1024K count=50
mkfs.ext3 -F test
mount: mounting localhost:/mnt/wrtest on wrtest failed: Connection refused
Modifying the nfsserver script to kill and restart kernel threads on
restart makes the problem go away and is consistent with current
RHEL/SUSE and Ubuntu/Debian mechanisms of handling the nfs server.
root@qemux86-64:~# ps | grep rpc.statd
650 root 10532 S /usr/sbin/rpc.statd
662 root 4720 S grep rpc.statd
As this daemon drops a pid file,simply use that instead.
Also add some initialization checks so the daemons are not
left partially started in the absence of kernel nfsd support.
Signed-off-by: Andy Ross <andy.ross@windriver.com> Signed-off-by: Qiang Chen <qiang.chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ming Liu [Tue, 22 Oct 2013 03:12:00 +0000 (11:12 +0800)]
bash: dynamically add or remove a entry to/from /etc/shells
1 Add base-files to RDEPENDS.
2 Use ${base_bindir} in regex to match bash path.
3 Add pkg_postrm to remove the entry from /etc/shells that added by
pkg_postinst.
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Ming Liu [Tue, 22 Oct 2013 03:11:59 +0000 (11:11 +0800)]
base-files: remove invalid entries from /etc/shells
It's more reasonable and secure to keep /etc/shells a minimal file, and
then entries for valid shells be added dynamically to the system, only if
the packages that provide them are supported.
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Konrad Scherer [Thu, 17 Oct 2013 14:17:20 +0000 (10:17 -0400)]
relocate_sdk.py: Allow script to work with Python 2.4 and 3.
Python 2.4 does not support the 'b' string literal or the
keyword 'as' in exception handling. Python 3 does not accept
the old method of exception handling and defaults to unicode.
The b() function converts strings to bytes on Python 3 and
using sys.exc_info() avoids the exception handling syntax.
Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
David Nyström [Fri, 18 Oct 2013 10:27:26 +0000 (12:27 +0200)]
rpm: Add nativesdk to BBCLASSEXTEND
Modified FILES-paths since nativesdk can't handle hardcoded paths,
Also added *.real binaries to packaging since this is not done when built
as native.
As far as /var having to be hardcoded, I have a hard time seeing someone
modifying bitbake.conf to place localstatedir somewhere else than /var.
If there exists a target/nativesdk portable way of hardcoding FILES,
please let me know, and we'll do it that way.
Cleanup of FEATURES, since it was the same for native & target.
Signed-off-by: David Nyström <david.nystrom@enea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Chen Qi [Mon, 21 Oct 2013 02:42:29 +0000 (10:42 +0800)]
runqemu-extract-sdk: add --numeric-owner option to tar command
If the same username exists on both target and the build host, but
the uids differ, and we start target via NFS, then the uid for the
user will be incorrect on target.
For example, if postfix's uid on host is 119 and on target is 1024,
then if we start target via NFS, the uid for postfix will be 119.
The root cause is that when we use runqemu-extract-sdk to generate
the NFS rootfs for later use, the tar command will respect the username
instead of uid. So if PSEUDO_PASSWD environment is not set correctly,
the host /etc/passwd will be used, resulting in wrong uids.
The situation for gid is completely analogous to that of uid.
It's almost impossible for the runqemu-extract-sdk to guess the correct
location of the needed password file merely based on the target tarball
name.
This patch solves this problem by adding the '--numeric-owner' option
to the tar command so that the uid/gid will be used when extracting the
tarball using runqemu-extract-sdk. In this situation, we'll always get
the correct uid/gid after extracting the tarball.
if test "x$enable_dri" = xyes; then
GBM_BACKEND_DIRS="$GBM_BACKEND_DIRS dri"
if test "x$enable_shared_glapi" = xno; then
AC_MSG_ERROR([gbm_dri requires --enable-shared-glapi])
fi
fi
fi
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Hongxu Jia [Fri, 18 Oct 2013 02:45:35 +0000 (10:45 +0800)]
kernel-grub.bbclass: add a method to install/update for bzImage
While installing a rpm to update kernel on a deployed target, it will update
the boot area and the boot menu with the kernel as the priority but allow
you to fall back to the original kernel as well.
- In kernel-image's preinstall scriptlet, it backs up original kernel to avoid
probable confliction with the new one.
- In kernel-image's postinstall scriptlet, it modify grub's config file to
updates the new kernel as the boot priority.
Ming Liu [Sun, 20 Oct 2013 10:48:29 +0000 (18:48 +0800)]
libarchive: replace += with _append for appending to OVERRIDES variables
In some cases, it's unfit to use "+=" in a conditional appending, we would
end up with the variable being set rather than being appended, which is not
it mean to.
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Ming Liu [Sun, 20 Oct 2013 10:48:30 +0000 (18:48 +0800)]
bzip2: replace += with _append for appending to OVERRIDES variables
In some cases, it's unfit to use "+=" in a conditional appending, we would
end up with the variable being set rather than being appended, which is not
it mean to.
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Fathi Boudra [Thu, 17 Oct 2013 16:57:10 +0000 (19:57 +0300)]
openssl: use linux-generic64 target for Aarch64 (LE and BE)
Update configure-targets.patch:
- drop linux-aarch64 configuration
Update do_configure():
- add linux-aarch64* case to cover linux-aarch64 and linux-aarch64_be
- use linux-generic64 target in above case
Backport initial-aarch64-bits.patch:
- first order optimizations for Aarch64
Petter Mabäcker [Thu, 17 Oct 2013 14:58:49 +0000 (16:58 +0200)]
clutter: remove usage of FILESPATH
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
However in clutter the default paths solves the problem if we
put all patches in ${BP} directory instead.
Sujith H [Wed, 16 Oct 2013 05:46:35 +0000 (11:16 +0530)]
nspr: Add LDFLAGS to TARGET_CC_ARCH to fix warning
WARNING: QA Issue: No GNU_HASH in the elf binary: 'armv7a-vfp-neon-mel-linux-gnueabi/nspr/4.10-r0/packages-split/nspr-dev/usr/lib/nspr/tests/formattm'
WARNING: QA Issue: No GNU_HASH in the elf binary: 'armv7a-vfp-neon-mel-linux-gnueabi/nspr/4.10-r0/packages-split/nspr-dev/usr/lib/nspr/tests/threads'
WARNING: QA Issue: No GNU_HASH in the elf binary: 'armv7a-vfp-neon-mel-linux-gnueabi/nspr/4.10-r0/packages-split/nspr-dev/usr/lib/nspr/tests/semaerr'
There are many QA Warnings thrown like the above for this recipe. This is observed for target imx6 sabrelite.
Signed-off-by: Sujith H <Sujith_Haridasan@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
base.bbclass: fix nondeterministic PACKAGECONFIG processing order
The PACKAGECONFIG flags were iterated over using dict.items(), but this
returns the items in an undefined order. As this order determines the
EXTRA_OECONF append order, we can get EXTRA_OECONF which are functionally
equivalent, but whose contents differ, resulting in not using shared state
archives we should be using.
Signed-off-by: Christopher Larson <kergoth@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Michaël Burtin [Tue, 22 Oct 2013 09:45:17 +0000 (11:45 +0200)]
initramfs-framework: fix test that filter backup module files
Test that filter backup module files (files starting with ~)
was accidentally reversed in e6039e6e3b98d6ab91252a5012d76279b1fac6e8,
this patch restore initial behavior.
Signed-off-by: Michaël Burtin <michael.burtin@innotis.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Tue, 22 Oct 2013 14:24:04 +0000 (09:24 -0500)]
wic: Make find_binary_path() more user-friendly
find_binary_path() is useful, but if the binary isn't found, it prints
a stacktrace and a less-than-useful message. Users complain when they
get stacktraces for things they can act on, so remove the stacktrace
and tell the user what the problem is.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Tue, 22 Oct 2013 14:24:02 +0000 (09:24 -0500)]
wic: Remove rpmmisc call from livecd
We don't currently use LiveCDImageCreator, but it makes calls when
initialized via the plugin interface to rpmmisc module functions,
which we don't want the dependency on.
To make it (and LiveUSBImageCreator) happy, we give it the dummy
"i386" value for now.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Tue, 22 Oct 2013 14:23:58 +0000 (09:23 -0500)]
wic: Remove dependency on rpmmisc
rpmmisc imports rpm and contains misc rpm utilities related to
packaging and determining arches based on the packaging. We should
never run across this in the initial version of wic, so remove the
dependency.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Tue, 22 Oct 2013 14:23:56 +0000 (09:23 -0500)]
wic: Remove dependency on rt_util module
rt_util contains bootstrap_mic(), which imports rpm and other things
we don't need because we don't do bootstrap i.e. runtime (set in
wic.conf) is always set to 'native', which means use what's on the
local host.
bootstrap mode is for downloading and installing rpms that wic needs,
which we may want to implement later; for now, we just want to use
what's local.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Thu, 17 Oct 2013 04:23:29 +0000 (00:23 -0400)]
linux-yocto/3.10: MinnowBoard support
Updating the 3.10 SRCREVs to update minnowboard support via the following changes:
3F6C824 pch_gbe: Add MinnowBoard support 9f52743 pch_gbe: Use PCH_GBE_PHY_REGS_LEN instead of 32 ec7b5e6 pch_gbe: use managed functions pcim_* and devm_* fd8bf50 pch_gbe: convert pr_* to netdev_* 9b278e9 serial: pch_uart: fix compilation warning 8982d79 serial: pch_uart: Fix signed-ness and casting of uartclk related fields cdbf456 serial: pch_uart: Remove __initdata annotation from dmi_table 9e7c25e pch_uart: Use DMI interface for board detection
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Qiang Chen [Fri, 18 Oct 2013 08:50:20 +0000 (16:50 +0800)]
openssh: fix sshd status command error prompt
sshd status command results in error prompt:
root@qemu0:~# /etc/init.d/sshd status
/usr/sbin/sshd (pid 1199) is running...
/etc/init.d/sshd: line 100: return: can only `return' from a
function or sourced script
"service --status-all" command also display wrong status for sshd.
This commit fix this error prompt and make service command display
right status for sshd.
Signed-off-by: Qiang Chen <qiang.chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
