Anders Darander [Fri, 10 Jan 2014 14:59:01 +0000 (15:59 +0100)]
terminal.bbclass: do not export PS1
With a complex PS1 setup, PS1 might not have all characters correctly escaped
when terminal.bbclass writes the export. This caused the run.do_terminal.PID to
terminate, making it impossible to use the devshell.
As the spawned shell will parse e.g. .bashrc (or whatever rc-file is being
used), PS1 will be reset in the devshell.
Signed-off-by: Anders Darander <anders@chargestorm.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Phil Blundell [Fri, 10 Jan 2014 12:54:16 +0000 (12:54 +0000)]
binutils: Also add autoconf-native to DEPENDS
Commit 616354f13732d13c17434d5b60b166f691c25761 is insufficient because
gnu-config-native's gnu-configize script uses perl modules from autoconf
and hence doesn't work unless autoconf-native is staged (which it may
not be if building from sstate).
Ideally g-c-n would itself declare a dependency on autoconf-native but this
is difficult to arrange without creating a dependency loop. autoconf-native
already depends on gnu-config-native (because autoreconf invokes gnu-configize)
and has a build dependency on m4-native, which in turn build-depends on g-c-n
because it configizes itself by steam in do_configure and needs config.{guess,sub}
to be available. Adding some sort of gnu-config-initial-native recipe would
fix the latter problem, but this would be ugly because it would need special-casing
in (at least) autotools.bbclass, and in any case this still wouldn't solve
the problem of autoconf itself depending on g-c-n.
So, the easiest solution to the problem at hand is to arrange for those
few recipes that depend on g-c-n but not autoconf-native to gain that
latter dependency as well.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Phil Blundell [Thu, 9 Jan 2014 11:16:10 +0000 (11:16 +0000)]
libsoup: Remove libproxy from DEPENDS
Although libsoup did use to support direct usage of libproxy, it hasn't
done so for some time. Worse, if libsoup depends on libproxy then it
is impossible to build libproxy against webkit since webkit itself
depends on libsoup in some configurations. Fix this by removing the
extraneous entry from DEPENDS.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Jacob Kroon [Mon, 30 Dec 2013 18:17:58 +0000 (19:17 +0100)]
meta/lib/oe/terminal.py: Don't pass non-supported '--disable-factory' flag to gnome-terminal
By default, all GNOME terminals share a single process,
reducing memory usage. This can be disabled by starting gnome-terminal
with the --disable-factory option
However, gnome-terminal in Fedora 20 does no longer support the
'--disable-factory' flag, so remove it. As the support for 'mate' terminals was
added as a copy of the gnome code in 8cc078a9c679845464c59028f584d7aba098cc1f,
remove the flag here aswell.
Signed-off-by: Jacob Kroon <jacob.kroon@mikrodidakt.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Saul Wold [Fri, 20 Dec 2013 18:47:26 +0000 (10:47 -0800)]
openssl: use PACKAGECONFIG to disable perl bits
Adding perl to the RDEPENDS caused a performance hit to the overall build time since this was
the only package that depended on perl. The openssl-misc package is not installed by default
so use a PACKAGECONFIG which can be overridden to allow the perl scripts along with perl to
be installed.
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Paul Eggleton [Fri, 20 Dec 2013 14:55:09 +0000 (14:55 +0000)]
libav: add libpostproc to PROVIDES (for 0.8.x version only)
There is a separate libpostproc recipe in meta-oe for use with 9.x and
later versions of libav for those few that need libpostproc; however if
you just add meta-oe and try to build libpostproc without selecting the
libav 9.x version recipe, you'll be building the libpostproc recipe
together with libav 0.8.x, which provides its own libpostproc; this
leads to confusing errors at packaging time. In order to flag up that
these conflict more appropriately, add libpostproc to PROVIDES
explicitly so that you at least get a multiple providers error at the
start of the build.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Tom Zanussi [Tue, 31 Dec 2013 19:59:24 +0000 (13:59 -0600)]
systemtap: Add --enable-prologues to configuration
In some cases, the debuginfo generated by the compiler is insufficient
for systemtap to figure out function param locations; using -P allows
it to use prologue searching to find the correct locations.
Enable prologue searching in the configuration so the user doesn't
have to specify it manually.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Scott Garman [Thu, 5 Dec 2013 21:57:31 +0000 (13:57 -0800)]
runqemu: remove core-image-* whitelist
Using a whitelist for image names to default to when none are
specified on the command line is no longer desired. Instead,
choose the most recently created image filename that conforms
to typical image naming conventions.
Signed-off-by: Scott Garman <scott.a.garman@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Ross Burton [Wed, 18 Dec 2013 16:20:02 +0000 (16:20 +0000)]
useradd.bbclass: add dependency on base-files
Packages that use useradd.bbclass should have a dependency on base-files so that
the /etc/skel directory is populated. Without this dependency base-files may or
may not be installed when the postinst runs, and the skel content may or may not
be copied.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
mykhani [Tue, 17 Dec 2013 08:28:35 +0000 (13:28 +0500)]
openssl.inc: Install c_rehash utility with openssl
c_rehash utility is not being installed with openssl.It conveniently
generates hash and symbolic links based on it for CA certificates
stored locally for SSL based server authentication
Signed-off-by: Yasir-Khan <yasir_khan@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Christopher Larson <kergoth@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Yue Tao [Thu, 5 Dec 2013 23:52:19 +0000 (17:52 -0600)]
icu: CVE-2013-2924
Use-after-free vulnerability in International Components for Unicode (ICU),
as used in Google Chrome before 30.0.1599.66 and other products, allows
remote attackers to cause a denial of service or possibly have unspecified
other impact via unknown vectors.
Signed-off-by: Yue Tao <Yue.Tao@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Yue Tao [Thu, 5 Dec 2013 23:52:18 +0000 (17:52 -0600)]
acpid: CVE-2011-1159
acpid.c in acpid before 2.0.9 does not properly handle a situation in which
a process has connected to acpid.socket but is not reading any data, which
allows local users to cause a denial of service (daemon hang) via a crafted
application that performs a connect system call but no read system calls.
Signed-off-by: Yue Tao <yue.tao@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Li Wang [Thu, 5 Dec 2013 23:52:17 +0000 (17:52 -0600)]
xinetd: CVE-2013-4342
xinetd does not enforce the user and group configuration directives
for TCPMUX services, which causes these services to be run as root
and makes it easier for remote attackers to gain privileges by
leveraging another vulnerability in a service.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2013-4342
the patch come from:
https://bugzilla.redhat.com/attachment.cgi?id=799732&action=diff
Signed-off-by: Li Wang <li.wang@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Roy Li [Tue, 10 Dec 2013 05:46:16 +0000 (13:46 +0800)]
multilib: Ensure we map the SYSTEMD_PACKAGES variable
If we don't do this, systemd.bbclase will complain to unable to find multilib
packages since PACKAGES is expand with mlprefix, but SYSTEMD_PACKAGES is not,
like in ntp.inc:
Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Hongxu Jia [Tue, 3 Dec 2013 06:03:50 +0000 (06:03 +0000)]
nativesdk.bbclass: support nativesdk to override with the PACKAGES_DYNAMIC statement
While compiling nativesdk-mtools, there was failure:
...
Nothing PROVIDES 'nativesdk-glibc-gconv-ibm850'. Close matches:
...
This patch supports nativesdk to override with the PACKAGES_DYNAMIC statement
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
For each recipe, it populated license files to ${LICENSE_DIRECTORY}/${PN},
such as kernel's license dir was ${LICENSE_DIRECTORY}/kernel-3.10.17-yocto-standard;
In do_rootfs task, it copied license directories from ${LICENSE_DIRECTORY}/
${pkg}, and ${pkg} was listed in ${INSTALLED_PKGS};
We got ${INSTALLED_PKGS} by rpm query, such as the kernel were 'kernel-*',
but the kernel's PN was linux-yocto, so searching ${LICENSE_DIRECTORY}/
kernel-* failed.
Copied license directories from ${LICENSE_DIRECTORY}/${PN} fixed this issue.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Include the console-kit module in PACKSGES explicitly so bitbake can map to
the RDEPENDS we define for it in this recipe, and thereby ensure that when
adding the console-kit module to an image, we also get the necessary
consolekit package produced.
Signed-off-by: Christopher Larson <kergoth@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
yzhu1 [Tue, 26 Nov 2013 08:38:28 +0000 (08:38 +0000)]
populate_sdk: verify executable or dynamically linked library
When toolchain directory is changed to execute mode, some non-executable
files or empty files are sorted. This will result in some errors. Thus when
sorting executable files or dynamically linked library, additional conditions
are to exclude non-executable files or empty files.
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Christopher Larson <kergoth@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
When using make -j with the 'install' target, it's possible for altbininstall
(which normally creates BINDIR) and libainstall (which doesn't, though it
installs python-config there) to race, resulting in a failure due to
attempting to install python-config into a nonexistent BINDIR. Ensure it also
exists in the libainstall target.
Signed-off-by: Christopher Larson <kergoth@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Yue Tao [Thu, 28 Nov 2013 08:34:48 +0000 (16:34 +0800)]
python: do not replace ccache in the middle of a path
Python recipe did a sed s/ccache/$(CCACHE) on the Makefile, which
replaces all "ccache" including ones that consist of a full path.
This leads to build error when building in a project path with
"ccache" in its name. Fix it by only replacing "ccache " with
"$(CCACHE) ".
Signed-off-by: Lei Liu <lei.liu2@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Richard Purdie [Fri, 29 Nov 2013 14:36:42 +0000 (14:36 +0000)]
image.bbclass: Depend on virtual/kernel:do_deploy
Now that none of the packagegroups depend on virtual/kernel, we have the problem
that MACHINE=qemumips bitbake core-image-minimal doesn't put a kernel
into the deploy directory. This breaks many common usecases and
user expectations.
To avoid this, add a dependency on the kernel deploy to image do_build tasks.
This should avoid any circular dependency issues but equally ensure users
have their expectations met.
Richard Purdie [Fri, 29 Nov 2013 11:22:56 +0000 (11:22 +0000)]
base/gcc-common: Ensure umask setting is consistent for shared workdir
gcc has cross and target components with a shared workdir. The unpack umask
settings need to match for all of these. We need to use strings in each
case to ensure the sstate code matches them correctly.
This patch tweaks various things to ensure the change adding the unpack umask
change doesn't break the compiler builds.
Martin Jansa [Fri, 22 Nov 2013 21:19:03 +0000 (22:19 +0100)]
base.bbclass: Set umask 022 also for do_unpack task
* when git checkouts files from fetched clone it respects system umask
and creates files with different permissions, if such files are copied
to packages, resulting target images have also different permissions
on them.
* we need reproducible builds across different builders with different
system umask, so set 022 umask
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Nick D'Ademo [Tue, 26 Nov 2013 06:26:46 +0000 (17:26 +1100)]
libav: install libraries to right directory when multilib is enabled
Explicitly set libdir and shlibdir to ${libdir} in EXTRA_OECONF. Otherwise, default library path of ${prefix}/lib is used which is incorrect in a multilib build.
Signed-off-by: Nick D'Ademo <nickdademo@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Robert Yang [Tue, 26 Nov 2013 10:32:34 +0000 (18:32 +0800)]
coreutils 6.9: fix coreutils.texi
This is used for fixing coreutils 6.9 (GPLv2+) do_installed failed:
[snip]
| coreutils.texi:2499: @itemx must follow @item
| coreutils.texi:2636: @itemx must follow @item
| coreutils.texi:2644: @itemx must follow @item
| coreutils.texi:2654: @itemx must follow @item
| coreutils.texi:2677: @itemx must follow @item
| coreutils.texi:2689: @itemx must follow @item
| coreutils.texi:2820: @itemx must follow @item
| coreutils.texi:3058: @itemx must follow @item
| coreutils.texi:3253: @itemx must follow @item
[snip]
Use '@item' instead of '@itemx' in several places, as Texinfo 5 refuses
to process an '@itemx' that is not preceded by an '@item'. Ensure that
node extended names in menus and sectioning are consistent, and that
ordering and presence of nodes in menus and in the actual text are
consistent as well.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Ming Liu [Wed, 13 Nov 2013 08:15:47 +0000 (16:15 +0800)]
qemu: explicitly disable xen support
We don't make use of xen and when building on Ubuntu 13.04 when
libxen-dev is installed on the build host you will get errors like the
following:
| /usr/include/x86_64-linux-gnu/bits/string3.h:81: warning: memset used with constant zero length parameter; this could be due to transposed parameters
| /usr/lib/gcc/x86_64-linux-gnu/4.7/../../../../lib/libxenguest.so: undefined reference to `lzma_alone_decoder@XZ_5.0'
| /usr/lib/gcc/x86_64-linux-gnu/4.7/../../../../lib/libxenguest.so: undefined reference to `lzma_code@XZ_5.0'
| /usr/lib/gcc/x86_64-linux-gnu/4.7/../../../../lib/libxenguest.so: undefined reference to `lzma_stream_decoder@XZ_5.0'
| /usr/lib/gcc/x86_64-linux-gnu/4.7/../../../../lib/libxenguest.so: undefined reference to `lzma_end@XZ_5.0'
This change disables xen for both -native and target packages but
since it is a PACKAGECONFIG a user could tune this to have xen support
in the target package.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Enrico Scholz [Mon, 25 Nov 2013 15:10:44 +0000 (16:10 +0100)]
bluez4: added dependency on 'libsndfile1'
bluez4 detects and uses libsndfile1 and the compilation can fail with
| sbc/sbctester.c:32:21: fatal error: sndfile.h: No such file or directory
| ...
| compilation terminated.
| make[1]: *** [sbc/sbctester.o] Error 1
in rebuilds (image with libsndfile1 was built, then some change ->
bluez4 do_configure runs with libsndfile1 -> libsndfile1 gets removed
-> bluez4 do_compile fails).
As there is no trivial way to disable its detection and to make it a
PACKAGECONFIG option, 'libsndfile1' was put into static DEPENDS.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Martin Jansa [Sun, 24 Nov 2013 13:28:27 +0000 (14:28 +0100)]
avahi: add leading space to RRECOMMENDS append
* in case update-rc.d is already in RRECOMMENDS it fails with
ERROR: Nothing RPROVIDES 'update-rc.dlibnss-mdns' (but
meta/recipes-connectivity/avahi/avahi_0.6.31.bb
RDEPENDS on or otherwise requires it)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Kai Kang [Mon, 25 Nov 2013 08:17:07 +0000 (16:17 +0800)]
x264: install libraries to right directory when enable multilib
x264 use [EPREFIX/lib] as default libdir. When multlib is enabled that
is not right. Packages depends on x264 such as libav configure fails
that can't find library x264.
Pass the right libdir to configure script to fix it.
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Martin Jansa [Sat, 7 Dec 2013 17:49:42 +0000 (18:49 +0100)]
ltp: set PREFERRED_PROVIDER and rename runtests_noltp.sh script
* ltp installs 2 different runtests_noltp.sh files from different
directories into /opt/ltp/testcases/bin/runtests_noltp.sh
last one installed wins and causes unexpected changes in
buildhistory's files-in-image.txt report, rename them to have
unique name as other ltp scripts have.
* also define PREFERRED_PROVIDER to resolve note shown when
building with meta-oe layer:
NOTE: multiple providers are available for ltp (ltp, ltp-ddt)
NOTE: consider defining a PREFERRED_PROVIDER entry to match ltp
* use patch generated without -M
in my builds both versions worked, but Saul reported that it fails to
apply with:
Applying patch
0001-Rename-runtests_noltp.sh-script-so-have-unique-name.patch
patch: **** Only garbage was found in the patch input.
Now I've see the same issue on different builder (with Ubuntu 12.04).
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Mike Crowe [Fri, 22 Nov 2013 14:23:02 +0000 (14:23 +0000)]
kernel.bbclass: Stop bundle_initramfs thwarting sstate cache and fix race
The new do_bundle_initramfs task introduced in 609d5a9ab9e58bb1c2bcc2145399fbc8b701b85a defeats using the sstate
cache. The kernel is resurrected from the sstate cache but ends up being
built again since do_bundle_initramfs depends on do_compile.
The task is no longer nostamp to avoid causing unnecessary rebuilds. The
sstate checksum stamps should know when to rebuild.
The task now runs before do_deploy and part of the work has been moved to
do_deploy where it now writes to ${DEPLOYDIR} rather than
${DEPLOY_DIR_IMAGE} so that the files end up in sstate.
The task can also race against do_install since both call into the kernel
build system. This is fixed by making do_bundle_initramfs run after
do_install (which therefore also fixes the problem that 3baa63b4d588c3262254528b406ede265dd117bf was addressing.)
Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Steffen Sledz [Thu, 28 Nov 2013 14:09:31 +0000 (15:09 +0100)]
gdb-7.6: fix cygwin check in configure script
This is a fix which avoids false positives if the search pattern
"lose" is found in path descriptions in comments generated by the
preprocessor we hit in our development environment.
Baogen Shang [Mon, 21 Oct 2013 03:03:41 +0000 (11:03 +0800)]
libtiff: CVE-2013-4243
cve description:
Heap-based buffer overflow in the readgifimage function in the gif2tiff
tool in libtiff 4.0.3 and earlier allows remote attackers to cause a denial
of service (crash) and possibly execute arbitrary code via a crafted height
and width values in a GIF image.
Signed-off-by: Baogen Shang <baogen.shang@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Baogen Shang [Mon, 21 Oct 2013 03:00:05 +0000 (11:00 +0800)]
libtiff: CVE-2013-4232
cve description:
Use-after-free vulnerability in the t2p_readwrite_pdf_image function
in tools/tiff2pdf.c in libtiff 4.0.3 allows remote attackers to cause
a denial of service (crash) or possible execute arbitrary code via a
crafted TIFF image.
Signed-off-by: Baogen Shang <baogen.shang@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Chen Qi [Thu, 21 Nov 2013 07:26:54 +0000 (01:26 -0600)]
nfs-utils: explicitly rdepend on bash
Scripts in nfs-utils need bash as their interpreter, so if nfs-utils
doesn't explicitly rdepend on bash, we would experience build failures
if we add nfs-utils to glibc-small images.
Add bash to RDEPENDS to solve this problem.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Ming Liu [Thu, 21 Nov 2013 07:05:04 +0000 (01:05 -0600)]
libtiff: fix CVE-2013-1960
Heap-based buffer overflow in the tp_process_jpeg_strip function in tiff2pdf
in libtiff 4.0.3 and earlier allows remote attackers to cause a denial of
service (crash) and possibly execute arbitrary code via a crafted TIFF image
file.
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Jeff Polk <jeff.polk@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Ross Burton [Fri, 29 Nov 2013 13:51:05 +0000 (13:51 +0000)]
qt4-x11-free: depend on ICU
ICU presence is auto-detected at configure time and until recently (e68850 and
d61230) was pulled into most builds through harfbuzz and beecrypt. Now it's
floating and this leads to build failures.
As in all likelihood the majority of people were building this with ICU enabled,
add an explicit dependency.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Lei Liu [Thu, 21 Nov 2013 19:30:48 +0000 (13:30 -0600)]
syslinux: use cross toolchain to compile
syslinux is compling something with host gcc at do_install
stage, which leads to some unexpected errors with old gcc
on host. Using our cross toolchain instead.
Signed-off-by: Lei Liu <lei.liu2@windriver.com> Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Jeffrey C Honig [Thu, 21 Nov 2013 07:34:41 +0000 (01:34 -0600)]
rootfs_*.bbclass: List which post-install scripts can not be run
When preping a read-only rootfs and finding some post-install
scripts that can not be run, list the names of said scripts to
avoid having to look around the rootfs to find a list.
Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com> Signed-off-by: Jeff Polk <jeff.polk@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Lei Liu [Thu, 21 Nov 2013 07:30:58 +0000 (01:30 -0600)]
package_rpm.bbclass: Replace -linux-gnun32 with -linux.* in RPM platform file
On a multilib system when one of the multibs has a different OS then
other multilibs a failure can occur during the install process because
RPM assumes all systems have the same OS.
When an n32 platform is selected as an alternative multilib, it shows
up as mips64_n32-.*-linux-gnun32 in /etc/rpm/platform. This causes
problems when the smart tool tries to add a channel for the multilib.
RPM archScore call always returns zero for arch "mips64_n32" -
after appending default vendor and os, it finds "mips64_n32-wrs-linux"
doesn't match any predefined platforms. Fix this by removing the
restriction of -gnun32 suffix in platform file.
Signed-off-by: Lei Liu <lei.liu2@windriver.com> Signed-off-by: Jeff Polk <jeff.polk@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Ming Liu [Thu, 21 Nov 2013 07:05:05 +0000 (01:05 -0600)]
gst-ffmpeg: fix CVE-2013-3674
The cdg_decode_frame function in cdgraphics.c in libavcodec in FFmpeg before
1.2.1 does not validate the presence of non-header data in a buffer, which
allows remote attackers to cause a denial of service (out-of-bounds array
access and application crash) via crafted CD Graphics Video data.
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Jeff Polk <jeff.polk@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Lei Liu [Thu, 21 Nov 2013 06:54:00 +0000 (00:54 -0600)]
base.bbclass: Fix incorrect setting of multilib PREFERRED_PROVIDER_virtual_pkg
PREFERRED_PROVIDER_virtual_pkg has been incorrectly set with more
than one multilib prefixes. For example, if we have two alternative
multilibs lib64 and lib32, PREFERRED_PROVIDER_virtual_pkg will be
set to lib32-lib64-pkg or lib64-lib32-pkg, depending on which
multilib shows up first in the list.
Signed-off-by: Lei Liu <lei.liu2@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Richard Purdie [Fri, 22 Nov 2013 09:24:04 +0000 (09:24 +0000)]
ethtool: Fix ptest compile
buildtest-TESTS is a phony target and does nothing which results in a
do_install error since the tests aren't built. Since there isn't
a suitable make target but the number of tests are small, hardcode
the two to build to unbreak the build when ptest is enabled.
Chen Qi [Mon, 18 Nov 2013 07:20:44 +0000 (15:20 +0800)]
license.bbclass: fix missing of license files on ubuntu build host
The license_create_manifest function contains bashism, this will lead
to unexpected results on ubuntu build host, as sh is linked to dash on
ubuntu. Even if COPY_LIC_MANIFEST and COPY_LIC_DIRS are enabled, the
license files will still be missing on target.
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Ming Liu [Wed, 13 Nov 2013 05:40:59 +0000 (13:40 +0800)]
kernel.bbclass: move bundle_initramfs after kernel_link_vmlinux
${KERNEL_OUTPUT} is being renamed/restored in bundle_initramfs task, so we
must ensure bundle_initramfs run after kernel_link_vmlinux where the link
of vmlinux is created as the bootable image.
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Hans Beckerus [Fri, 15 Nov 2013 14:25:33 +0000 (15:25 +0100)]
initscripts: add missing dmesg.sh to run-level S
In commit faa8cc6c2a582a32c695f3f2b0d45b6892c769fd dmesg.sh was
added to the set of init.d scripts. But the script was never put
in any run-level. This patch will add dmesg.sh to run-level S.
Signed-off-by: Hans Beckerus <hans.beckerus AT gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Wenzong Fan [Thu, 14 Nov 2013 02:45:48 +0000 (21:45 -0500)]
udev: remove extra -dev/-dbg packages
We don't support multiple -dbg/-dev packages, the package can generate
them but the system does not correctly handle them. Just move all devel
stuffs into 'udev-dev' and all debug stuffs into 'udev-dbg'.
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Laurentiu Palcu [Wed, 6 Nov 2013 13:07:58 +0000 (15:07 +0200)]
flex: fix m4 issue on target
Flex needs m4 to run (see below) and, since the create_wrapper
introduces a bash dependency on target, give the path to m4 binary in
the configure command line.
Snippet from the flex documentation:
"The macro processor m4 must be installed wherever flex is installed.
<...>
m4 is only required at the time you run flex."
Chunrong Guo [Tue, 12 Nov 2013 03:40:49 +0000 (11:40 +0800)]
mdadm: flag __SANE_USERSPACE_TYPES__ to include int-ll64.h for powerpc64
*PPC64 uses long long for u64 in the kernel, but powerpc's asm/types.h
prevents 64-bit userland from seeing this definition, instead defaulting
to u64 == long in userspace.
*fix the below error
|super-ddf.c:4542:5: error: format '%llu' expects argument of type 'long long unsigned int',
|but argument 5 has type '__u64' [-Werror=format=]
|dprintf("BVD %u has %08x at %llu\n", 0,
Paul Eggleton [Sun, 17 Nov 2013 12:28:19 +0000 (12:28 +0000)]
buildhistory_analysis: fix error when comparing image contents
OE-Core commit b7de1eaac9eed559b2d68058f5de67de74a6cb58 added an extra
argument to the compare_dict_blobs() function but missed adding the
argument to one call to compare two versions of the image-info.txt file.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Jeffrey C Honig [Wed, 13 Nov 2013 16:37:41 +0000 (11:37 -0500)]
perl: perl-ptest.inc polutes package dependencies when ptest not enabled
When ptest is not enabled, the populate_packages_prepend function runs
wheter ptest is enabled or not. This causes ptest packages to get in the
dependencies list when ptest is not enabled.
Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Phil Blundell [Thu, 14 Nov 2013 14:41:21 +0000 (14:41 +0000)]
boost: Add patch to avoid undefined references to boost::atomic::lockpool::get_lock_for()
Boost::thread uses functions from boost::atomic but doesn't actually
link with libboost_atomic. This works fine on platforms where
BOOST_ATOMIC_FLAG_LOCK_FREE is true but will lead to undefined
symbol references otherwise. Fix this by applying a patch from
the upstream bug tracker to add the missing library linkage.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Saul Wold [Fri, 15 Nov 2013 01:52:13 +0000 (17:52 -0800)]
sysvinit: unmount the psplash lazyily
There is an race condition where psplash is not quite exited before the unmount occurs
causing a umount: /mnt/.psplash: target is busy message to appear, it's ok to lazyily
unmount and not get this message
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Bruce Ashfield [Wed, 13 Nov 2013 16:40:10 +0000 (16:40 +0000)]
linux-yocto/3.10: meta: ARM: OMAP3: Add USB PHY driver for Beagleboard
Updating the meta branch SRCREV to update the USB configuration:
The Beagleboard needs the USB PHY drivers in the kernel in order to enable
USB and Ethernet functionality. This fix ensures that they are built in
by tweaking the kernel config.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Bruce Ashfield [Thu, 14 Nov 2013 16:55:24 +0000 (11:55 -0500)]
linux-yocto/3.10: meta: ARM: OMAP3: Add USB PHY driver for Beagleboard
Updating the meta branch SRCREV to update the USB configuration:
The Beagleboard needs the USB PHY drivers in the kernel in order to enable
USB and Ethernet functionality. This fix ensures that they are built in
by tweaking the kernel config.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Bruce Ashfield [Tue, 5 Nov 2013 18:47:50 +0000 (13:47 -0500)]
linux-yocto/3.10: fix qemuarm boot and spurious mips build warning
This update fixes two issues:
a) qemuarm boot failure
v3.10.13 picked up a patch for arm versatile interrupt mappings that fixes
the emulator boot out of the box. But it interacts badly with our previous
fix for the issue. Reverting the existing patch and going with the mainline
solution fixes the boot.
b) qemumips build warning and failure
Depending on the build host and compiler, the build of menuconfig throws
an potentially uninitialized variable warning. That warning causes an
error on archs with -Werror. We can do a trivial change to avoid the
warning all together (initilize it to null), and keep everyone happy.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Bruce Ashfield [Thu, 17 Oct 2013 04:23:29 +0000 (00:23 -0400)]
linux-yocto/3.10: MinnowBoard support
Updating the 3.10 SRCREVs to update minnowboard support via the following changes:
3F6C824 pch_gbe: Add MinnowBoard support 9f52743 pch_gbe: Use PCH_GBE_PHY_REGS_LEN instead of 32 ec7b5e6 pch_gbe: use managed functions pcim_* and devm_* fd8bf50 pch_gbe: convert pr_* to netdev_* 9b278e9 serial: pch_uart: fix compilation warning 8982d79 serial: pch_uart: Fix signed-ness and casting of uartclk related fields cdbf456 serial: pch_uart: Remove __initdata annotation from dmi_table 9e7c25e pch_uart: Use DMI interface for board detection
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
