Michael Lippautz [Thu, 30 Jun 2011 18:09:11 +0000 (20:09 +0200)]
linux-firmware: Add Realtex rt8192* firmwares
This patch adds the firmware files for:
* rt8192cu
* rt8192ce
* rt8192su
[RP: Changed file modes to 0644] Signed-off-by: Michael Lippautz <michael.lippautz@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Thu, 30 Jun 2011 08:07:15 +0000 (01:07 -0700)]
uclibc: Fix bug exposed by udev 168+ for mips architecture
newer udev uses sgnalfd + epoll and this exposed a bug
in uclibc for mips where SFD_NONBLOCK should be defined
with 0200 for mips but was using 04000. This would cause
random segfaults in udev during boot process
Tested on qemumips/angstrom console-image since angstrom
uses udev 171. It worked well when we did not use meta-oe
layer because udev in oe-core will then be used which is
at version 164.
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Mon, 20 Jun 2011 15:57:49 +0000 (10:57 -0500)]
classes/package.bbclass: Add fixup_perms
Add a new function that is responsible for fixing directory and file
permissions, owners and groups during the packaging process. This will fix
various issues where two packages may create the same directory and end up
with different permissions, owner and/or group.
The issue being resolved is that if two packages conflict in their ownership
of a directory, the first installed into the rootfs sets the permissions.
This leads to a least potentially non-deterministic filesystems, at worst
security defects.
The user can specify their own settings via the configuration files
specified in FILESYSTEM_PERMS_TABLES. If this is not defined, it will
fall back to loading files/fs-perms.txt from BBPATH. The format of this
file is documented within the file.
By default all of the system directories, specified in bitbake.conf, will
be fixed to be 0755, root, root.
The fs-perms.txt contains a few default entries to correct documentation,
locale, headers and debug sources. It was discovered these are often
incorrect due to being directly copied from the build user environment.
The entries needed to match the base-files package have also been added.
Also tweak a couple of warnings to provide more diagnostic information.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Khem Raj [Tue, 28 Jun 2011 01:40:49 +0000 (18:40 -0700)]
uclibc: Remove redundant machine/arch configs
Big endian counterparts are not needed since
we already add the proper endianness to final
config as seen in uclibc-config.inc
The difference between arm and armv5te configs
were also superficial since all it did was select
arm926t which made sure that right mtune and march
flags were passed to gcc when building uclibc
We already do that via passing them in
UCLIBC_EXTRA_CFLAGS.
Similarly for other architectures the features
are really taken care of in config mangler and
machine config fragments are no longer needed
Scott Garman [Tue, 28 Jun 2011 22:15:39 +0000 (15:15 -0700)]
shadow-native: fix creation of home directories
Pseudo was recently changed so that when system() calls are
made after a chroot(), the host binaries can no longer be found,
breaking the system("mkdir -p") approach when useradd creates
home directories.
Instead, use mkdir(2) to create home directories with a helper
function to ensure parent directories get created.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Wenzong Fan [Fri, 24 Jun 2011 07:42:14 +0000 (15:42 +0800)]
ccache: Set CCACHE on a per recipe basis
Set 'CCACHE_DIR' in 'bitbake.conf' and create the dirs for every
package before task 'do_configure' started.
[RP: Merge dirs variables into one] Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_configure and do_compile need a umask of 022 set because -many- recipes
directly copy generated files out of recipe's build directory. Instead of
fixing each existing and future recipe, it was shown to be much easier to
just set the umask.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
sanity.bbclass: pass the data object to the less frequent test harnesses
By passing the data object to the less frequently run test harnesses
(check_sanity_tmpdir_change(), check_sanity_sstate_dir_change() and
check_sanity_version_change()) we can run tests against BitBake data here
too.
Darren Hart [Wed, 29 Jun 2011 19:16:07 +0000 (12:16 -0700)]
kernel: move menuconfig task after configure
Fixes [YOCTO 1136]
linux-yocto adds some configure steps that are necessary to prepare the source
tree after the do_patch task. This causes a "-c menuconfig" to fail in a clean
build tree. Typical use of menuconfig should be to modify the config provided
by the recipe being built. It therefor makes sense for the menuconfig task to
come after the configure task. This also happens to fix the issue seen with the
linux-yocto kernel recipe.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Robert Yang [Tue, 28 Jun 2011 20:31:04 +0000 (14:31 -0600)]
Share gcc work directories
This patched is derived from Richard, make gcc use the shared source
directory during the different building:
1) Make gcc-cross, gcc-cross-initial, gcc-cross-intermediate and
gcc-runtime share the same source directory.
2) The source directory is ${TMPDIR}/work-shared/gcc-${PV}, for example:
tmp/work-shared/gcc-4.5.1
3) Fix do_clean to clean the shared source directory and stamps
4) gcc uses sed and creates config files against ${S} which means the
directory should not be shared. Change the way to make it work:
* The configure option --with-headers=${STAGING_DIR_TARGET}${SYSTEMHEADERS}
can replace the sed command, see the code in configure:
if test "x$with_headers" != x; then
glibc_header_dir=$with_headers
This has the same effect as the sed command:
sed -i 's:^\([ ]*\)glibc_header_dir=\"${with_build_sysroot}/usr/include\": ...
so add the --with-headers=${STAGING_DIR_TARGET}${SYSTEMHEADERS} to
gcc-configure-cross.inc( not add to gcc-configure-common.inc, since
not all the gcc building need this, the one which has its own do_configure
doesn't need it).
* Move t-oe from ${T} to ${B}/gcc, so that the patched Makefile.in
can read it easily, please see the commit for gcc-4.5.1 and
gcc-4.6.0.
* Use the defaults.h in ${B}/gcc instead of ${S}/gcc, and the patched
configure.ac(configure) can read it correctly, please see the
commit for gcc-4.5.1 and gcc-4.6.0.
* The gcc-crosssdk.inc used sed to edit ${S}/config/*/linux*.h
to change the GLIBC_DYNAMIC_LINKER, which made the source
incompatible. To make the source compatible:
- Use:
sed -i ${S}/gcc/config/*/linux*.h -e \
's#\(GLIBC_DYNAMIC_LINKER[^ ]*\)\( *"/lib.*\)#\1 SYSTEMLIBS_DIR\2#'
so entries in the files that look like:
#define GLIBC_DYNAMIC_LINKER64 "/lib64/ld-linux-x86-64.so.2"
would become
#define GLIBC_DYNAMIC_LINKER64 SYSTEMLIBS_DIR"/ld-linux-x86-64.so.2"
and we define SYSTEMLIBS_DIR in defaults.h.
NOTE:
#define GLIBC_DYNAMIC_LINKER64 (SYSTEMLIBS_DIR "/ld-linux-x86-64.so.2")
doesn't work in in the following define:
#define LINUX_DYNAMIC_LINKER \
CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER)
so use
#define GLIBC_DYNAMIC_LINKER64 SYSTEMLIBS_DIR"/ld-linux-x86-64.so.2"
5) Add do_configure_prepend to gcc-configure-common.inc and remove the
one in gcc-crosssdk.inc, this makes it easy to share the source,
otherwise we need do extra changes in gcc-configure-sdk.inc.
6) Use "cat > file <_EOF" to replace the "echo > file"
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Commit 477ede7472db0bacd5daacb96e97f849d1be84ee accidentally reverted
some code changes it shouldn't have done leading to continued eglibc
packaging issues. This patch corrects that damage.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dongxiao Xu [Tue, 28 Jun 2011 07:58:40 +0000 (15:58 +0800)]
connman: Upgrade to version 0.75
Enable ofono plugin.
Adopt some logic in meta-oe on connman plugin runtime dependency.
Remove the fix-shutdown-ap-disconnect.patch since the original logic no longer exists.
Add Upstream-Status information for patches.
Mark Hatle [Wed, 29 Jun 2011 01:36:11 +0000 (20:36 -0500)]
prelink_git.bb: Only block the postinst script when no image-prelink
If image-prelink is being used, the system will automatically prelink
the target image. This avoids the need to run the postinst prelink
script at first boot. However, if the user has not enabled image
prelinking -- then we do enable the script to run on first boot.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Koen Kooi [Wed, 29 Jun 2011 12:00:23 +0000 (14:00 +0200)]
libc locale split: fix some remaining problems
* libc-{common,package}.bbclass: fix shlib renaming for the C library
Without this you'd end up with eglibc_2.12.ipk instead of libc6_2.12.ipk as before
* eglibc-locale: don't make versions go backwards after split from eglibc
eglibc was way beyond PR = "r1" at the time of the split, so increase PR to make package upgrades work
Richard Purdie [Wed, 29 Jun 2011 12:35:00 +0000 (13:35 +0100)]
glibc/eglibc: Clean up package warnings and potentially broken data in -dev package
These changes ensure files packaged in the -locale package aren't included
in the main do_install and also ensures the staging directory used for
the -locale package doesn't end up in the -dev package.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 29 Jun 2011 12:04:40 +0000 (13:04 +0100)]
libc-locale: Fixup various packaging warnings
After the recent locale changes there were warnings about many unpackaged files.
Fix this by directing libc-package.bbclass to operate directly on the files in
the sysroot and adding packaging for .debug files in this package.
Also sync up the eglibc and glibc versions of this code more closely.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ilya Yanok [Tue, 28 Jun 2011 14:54:51 +0000 (16:54 +0200)]
[PATCH] u-boot-mkimage: bump version to 2011.03
This patch changes u-boot-mkimage version to 2011.03. Unfortunately
U-Boot 2011.03 release has some problems building tools from
unconfigured tree, so this patch aslo includes the backported fixes.
Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Mon, 27 Jun 2011 21:11:58 +0000 (14:11 -0700)]
Add PARALLEL_MAKE to BB_ENV_EXTRAWHITE
As BB_NUMBER_THREADS is already whitelisted, it is consistent to
also allow PARALLEL_MAKE to be overridden via the environment. This
also simplifies performance testing where multiple combinations of
those two variables are a natural thing to do.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Zhai Edwin [Fri, 24 Jun 2011 07:49:14 +0000 (15:49 +0800)]
glib-networking: Add 2.28.7 as new recipe
glib-networking contains the implementations of certain GLib networking
features that cannot be implemented directly in GLib itself because of their
dependencies. TLS/SSL support is one of them, which is needed for accessing SSL
web page.
Scott Garman [Tue, 14 Jun 2011 16:49:18 +0000 (09:49 -0700)]
sudo: upgrade to v1.8.1p2
Upgrading to the latest stable release of sudo.
This version of sudo has reorganized its source code layout, hence
the LIC_FILES_CHKSUM related changes. Also, some of the individual
.c files we checksummed (nonunix.h, vasgroups.c) are no longer
shipped with the sources. Finally, an embedded copy of zlib is now
included in these sources, so Zlib is included as one of the
licenses. I could not find any evidence of MIT-licensed sources,
so that license has been removed.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Mei Lei [Mon, 20 Jun 2011 09:29:36 +0000 (17:29 +0800)]
distrodata.bbclass: Get the extend recipe's information from non bbextended recipe
This patch will check whether the recipe is an extened recipe, if yes, some informaiton couldn't be got, so collect those information(like maintainer information or lastcheckversion) from non bbextended recipe.
Mark Hatle [Fri, 24 Jun 2011 18:30:15 +0000 (13:30 -0500)]
prelink: Uprev prelink to latest version
The latest cross-prelink version tracks the prelink r190 SVN.
Fix two minor issues as well. If we remove the package, we would
unprelink the filesystem after the rm was finished. This is
incorrect.. we need to do this prerm.
Move the cron and cron configuration file to a new package split.
This item is not valid for most embedded users.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Scott Garman [Tue, 21 Jun 2011 00:21:16 +0000 (17:21 -0700)]
base-passwd: remove login.defs references
login.defs is owned by shadow-utils, and doesn't belong here. The
shadow-sysroot recipe was created to handle the case this was
originally added for (useradd.bbclass support).
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Scott Garman [Tue, 21 Jun 2011 00:11:34 +0000 (17:11 -0700)]
shadow-sysroot: new recipe for useradd.bbclass support
Packaging login.defs with base-passwd causes problems due to the
file being included in target package installs. Instead, this
shadow-sysroot recipe can be used by useradd.bbclass to put
login.defs into the target sysroot without disturbing packages
intended for target devices.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Richard Purdie [Thu, 23 Jun 2011 10:32:19 +0000 (11:32 +0100)]
base/glib-2.0: Simplify USE_NLS handling for glib-2.0
Currently the only way to get anything to build is to set USE_NLS="yes"
for glib-2.0. We might as well do this in the recipe by default for
now and simpllify the code.
The magic handling of USE_NLS_<recipename> is also removed since this
can be done in the form USE_NLS_pn-<recipename> using overrides these
days.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Garman [Wed, 15 Jun 2011 01:16:29 +0000 (18:16 -0700)]
bitbake wrapper: exit if python v3 is detected
Make sure we're not using python v3.x. This check can't go into
sanity.bbclass because bitbake's source code doesn't even pass
parsing stage when used with python v3, so we catch it here so we
can offer a meaningful error message.
This fixes bug [YOCTO #1128]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Dongxiao Xu [Tue, 28 Jun 2011 06:58:15 +0000 (14:58 +0800)]
libc-locale: split locale handling from libc recipe.
*libc's do_package will cost a lot of time due to the locale handing,
which may delay the other recipe's do_package task and affect the build
performance.
This commit moves locale handling into a separate recipe *libc-locale.
[RP: Add fixup with recent eglibc commit conflict for FILES_pn-dbg and PACKAGES] Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jiajun Xu [Fri, 24 Jun 2011 07:53:45 +0000 (15:53 +0800)]
qemuimagetest: update cvs and iptables to newer version for toolchain test
The old versions of cvs and iptables may meet compile error under some architecture
- cvs 1.11.23 fails on x86-64 host and iptables 1.4.9 fails on arm host. Update them
to latest version could solve these build error.
Meanwhile, 240s timeout is set for sudoku becasue 120s is not enough to finish
compile.
Mark Hatle [Tue, 21 Jun 2011 00:04:13 +0000 (19:04 -0500)]
python: Add python to the dependency to pygobject
pygobject requires both python and pygobject-native for compilation. Without
python pygobject may fail to compile.. and items that depend on pygobject will
fail to compile.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
