Otavio Salvador [Fri, 15 May 2015 21:31:04 +0000 (18:31 -0300)]
Merge remote-tracking branch 'ossystems/dizzy' into pending
* ossystems/dizzy: (39 commits)
split_and_strip_files: regroup hardlinks to make build deterministic
meta/lib/oe/package.py: fix files ownership in packages
init-install-efi.sh: fix gummiboot entry installation
busybox: unbreak tar of uncompressed files
fontcache: allow to pass different fontconfig cache dir
postinst-intercepts/update_font_cache: fix ownership of fontconfig cache
pulseaudio: use stricter PACKAGES_DYNAMIC
valgrind: enable building on 4.x kernel
build-appliance-image: Update to dizzy head revision
dpkg: Fix patch to adjust for older code
build-appliance-image: Update to dizzy head revision
gcc-target: Don't install target gcc libdir files
initscripts: Remove /etc/volatile.cache on upgrade
base-files: Check for /run and /var/lock softlinks on upgrade
dpkg-native: Avoid 'file changed' errors from tar
files/toolchain-shar-template.sh: fix replace target_sdk_dir twice in environment setup file
gcc-runtime: Remove libgfortran data from receipe
fontcache.bbclass: prepend to PACKAGEFUNCS instead of appending
libunwind: backport patch to link against libgcc_s intead of libgcc
autotools: Avoid find race for S = "${WORKDIR}"
...
Created separate group of hardlinks for the files inside
the same package. This should prevent stripped files to be
populated outside of package directories.
This turns out not to be straightforward and has overlap with the
other hardlink handling code in this area. The code is condensed
into a more concise and documented form.
Fabrice Coulon [Thu, 14 May 2015 18:01:40 +0000 (19:01 +0100)]
meta/lib/oe/package.py: fix files ownership in packages
This fix solves the problem with the ownership of files in packages.
The do_install task was producing correct and expected output but when
the files were being put in, e.g. a rpm package, the ownership could
be different than that in the do_install task.
After selecting the "install" gummiboot option of a Live image we are
seeing boot failure resulting from the gummiboot entries not being
installed correctly. This seems to be a problem in this init-install-efi.sh
script where it incorrectly installs the gummiboot entries into the root
filesystem, not the boot partition. We fix it by installing the entries in
the boot partition.
Jonathan Liu [Tue, 21 Apr 2015 10:53:02 +0000 (12:53 +0200)]
postinst-intercepts/update_font_cache: fix ownership of fontconfig cache
The file ownership of the cache files in /var/cache/fontconfig needs to
be set to root:root otherwise it inherits the user and group id of the
build user.
[YOCTO #7411]
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Tue, 21 Apr 2015 10:53:01 +0000 (12:53 +0200)]
pulseaudio: use stricter PACKAGES_DYNAMIC
* I don't see any usage for libpulse-* packages
* adding '-' resolves the issue when we have separate recipe for
pulseaudio-modules-droid which isn't built to satisfy RDEPENDS
with the same name, because generic pulseaudio recipe seems to
RPROVIDE it through PACKAGES_DYNAMIC
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 13 Feb 2015 13:05:59 +0000 (13:05 +0000)]
gcc-target: Don't install target gcc libdir files
Installing /usr/lib/gcc/* means we'd have two copies, one from gcc-cross
and one from here. These can confuse gcc cross where includes use #include_next
and builds track file dependencies (e.g. perl and its makedepends code).
For determinism we don't install this to the sysroot, ever and rely on the
copy from gcc-cross.
initscripts: Remove /etc/volatile.cache on upgrade
/etc/volatile.cache is a cached copy of a script (which is
generated by /etc/init.d/populate-volatile.sh) that generates
the volatile filesystem directories. Since volatile.cache is
a generated file, it is not necessarily changed if
populate-volatile.sh is updated. As a result, the stale script
can add/remove the wrong directories on the next system boot.
If initscripts is being upgraded, make sure volatile.cache gets
deleted.
base-files: Check for /run and /var/lock softlinks on upgrade
Commit ea647cd9eebdc3e3121b84074519c4bb305adac9 moved the locations
of /run and /var/lock to match the FHS 3 draft specifications.
However, the install doesn't remove the existing directories.
As a result, upgrading a system may result in /run as a softlink
to /var/run and /var/run as a softlink to /run, creating a circular
link.
During pre-install, check for the existence of the old softlinks and
remove them so the new directories can be installed.
Richard Purdie [Sat, 28 Mar 2015 08:50:27 +0000 (08:50 +0000)]
dpkg-native: Avoid 'file changed' errors from tar
Hardlink count duing do_package_write_deb can change causing dpkg-deb
failures. We don't care about this error case so avoid it by checking
the tar exit code.
Otherwise, when fortran support will be enabled in the compiler, both
lingfortran and gcc-runtime receipes will create the same files and will
try to install them. This will cause errors:
ERROR: The recipe libgfortran is trying to install files into a shared
area when those files already exist. Those files and their manifest
location are: ...
Please verify which recipe should provide the above files.
Jonathan Liu [Wed, 11 Mar 2015 02:25:56 +0000 (13:25 +1100)]
fontcache.bbclass: prepend to PACKAGEFUNCS instead of appending
Appending to PACKAGEFUNCS results in the font packages missing the
postinst/postrm scripts and the fontconfig cache not being generated
in /var/cache/fontconfig when creating images or installing font
packages. This is because the package data has already been emitted
by emit_pkgdata in PACKAGEFUNCS. Prepend to PACKAGEFUNCS to ensure
add_fontcache_postinsts is executed before emit_pkgdata.
[YOCTO #7410]
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Richard Purdie [Thu, 26 Mar 2015 14:18:30 +0000 (14:18 +0000)]
autotools: Avoid find race for S = "${WORKDIR}"
For recipes with PACKAGES_remove = "${PN}", the find which removes .la files
can race against deletion of other directories in WORKDIR e.g.:
find: '/home/autobuilder/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/qemux86_64-poky-linux/init-ifupdown/1.0-r7/sstate-build-populate_lic': No such file or directory
| WARNING: /home/autobuilder/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/qemux86_64-poky-linux/init-ifupdown/1.0-r7/temp/run.do_configure.6558:1 exit 1 from
| find /home/autobuilder/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/qemux86_64-poky-linux/init-ifupdown/1.0-r7 -name \*.la -delete
The simplest fix is to add the find option which ignores these kind of races.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Armin Kuster [Sat, 21 Mar 2015 14:42:09 +0000 (07:42 -0700)]
tzdata: update to 2015b
Changes affecting future time stamps
Mongolia will start observing DST again this year, from the last
Saturday in March at 02:00 to the last Saturday in September at 00:00.
(Thanks to Ganbold Tsagaankhuu.)
Palestine will start DST on March 28, not March 27. Also,
correct the fall 2014 transition from September 26 to October 24.
Adjust future predictions accordingly. (Thanks to Steffen Thorsen.)
Changes affecting past time stamps
The 1982 zone shift in Pacific/Easter has been corrected, fixing a 2015a
regression. (Thanks to Stuart Bishop for reporting the problem.)
Some more zones have been turned into links, when they differed
from existing zones only for older time stamps. As usual,
these changes affect UTC offsets in pre-1970 time stamps only.
Their old contents have been moved to the 'backzone' file.
The affected zones are: America/Antigua, America/Cayman,
Pacific/Midway, and Pacific/Saipan.
Changes affecting time zone abbreviations
Correct the 1992-2010 DST abbreviation in Volgograd from "MSK" to "MSD".
(Thanks to Hank W.)
Armin Kuster [Sat, 21 Mar 2015 14:42:08 +0000 (07:42 -0700)]
tzcode: update to 2015b
Changes affecting code
Fix integer overflow bug in reference 'mktime' implementation.
(Problem reported by Jörg Richter.)
Allow -Dtime_tz=time_t compilations, and allow -Dtime_tz=... libraries
to be used in the same executable as standard-library time_t functions.
(Problems reported by Bradley White.)
Changes affecting commentary
Cite the recent Mexican decree changing Quintana Roo's time zone.
(Thanks to Carlos Raúl Perasso.)
Likewise for the recent Chilean decree. (Thanks to Eduardo Romero Urra.)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
and because 'bitbake' cleans environment we can pass it completely
instead of trying to enumerate needed env.
With the 'env.patch' the FULLCC variable is not needed anymore (which
would break when CC is 'ccache arm-...-gcc' and host ccache is used)
because the correct $PATH is available during scons build:
| sh: .../sysroots/x86_64-oe-linux/usr/bin/arm-linux-gnueabi/ccache: No such file or directory
| scons: *** [context.o] Error 127
Chen Qi [Tue, 3 Feb 2015 20:53:39 +0000 (14:53 -0600)]
package_manager.py: fix rootfs failure with multilib enabled
With the current code, if we use debian package backend and enable
multilib support, the do_rootfs process would always fail with error
messages like below.
E: Unable to locate package packagegroup-core-boot
Richard Purdie [Wed, 15 Apr 2015 13:13:22 +0000 (14:13 +0100)]
toolchain-scripts: Allow the CONFIGSITE_CACHE variable to be overridden
In multilib and baremetal configurations, this variable can cause a variety of
problems due to the use of TCLIBC. At least allowing it to be overriden
is a start and allows various configurations to avoid the issue.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 28 Mar 2015 10:34:13 +0000 (10:34 +0000)]
file: Update CVE patch to ensure file gets built correctly
If we touch both files, we can end up in a situation where magic.h should be
rebuilt and isn't. The easiest fix is not to touch the generated files which
ensures the timestamps are such that it is always rebuilt.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Max Krummenacher [Wed, 25 Mar 2015 22:09:37 +0000 (23:09 +0100)]
udev: don't keep ptest testdata laying around
Only unpack udev's testdata right before executing the tests and cleanup
afterwards.
udev's testsuite can be used by ptest. However currently the testdata against
which its functionality is tested is installed in the sysroot at udev install
time.
If the sysroot is used with qemu the testdata makes qemu entering an infinite
loop.
http://lists.openembedded.org/pipermail/openembedded-core/2014-September/097098.html
This has already been fixed for the systemd udev flavour.
https://bugzilla.yoctoproject.org/show_bug.cgi?id=5664
Signed-off-by: Max Krummenacher <max.oss.09@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Max Krummenacher [Wed, 25 Mar 2015 22:09:36 +0000 (23:09 +0100)]
udev: fix ptest rule syntax check
The ptest which checks for correct udev rules fails.
Missing files and paths for the build host caused this.
Signed-off-by: Max Krummenacher <max.oss.09@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Brendan Le Foll [Wed, 25 Mar 2015 13:15:43 +0000 (13:15 +0000)]
openssl: Upgrade to 1.0.1m
Security update, some patches modified to apply correctly mostly due to
upstream changing indentation/styling
* configure-targets.patch updated
* fix-cipher-des-ede3-cfb1.patch updated
* openssl-avoid-NULL-pointer-dereference-in-EVP_DigestInit_ex.patch updated
* openssl-avoid-NULL-pointer-dereference-in-dh_pub_encode.patch removed as no
merged with 3942e7d9ebc262fa5c5c42aba0167e06d981f004 in upstream
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
btrfs emtpy partition creation is currently not working because of the
usage of the non existant variables rootfs ans extra_imagecmd. It also
as an incorrect size.
Change-Id: I7cb0b669cca8caa061aa292d9d355a3c21767bc9 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Introduce a new option --extra-space instead of using IMAGE_EXTRA_SPACE.
This is useful for boot partitions where the extra space is often
useless or for huge partition where 10MiB may not be enough.
Change-Id: I13036e434f06b8f56b6951bd7583d91e3404e070 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
For some architectures it is necessary to reserve space on disk without
it being present in the partition table.
For example, u-boot on i.mx is placed at an offset of 1kB on the sdcard.
While it would be possible to create a partition at that offset and
place u-boot there, it would then be necessary to update the default
u-boot environment to use partition 2 on the mmc instead of partition 1.
Change-Id: Ie9fd0690bc8a229c396453d926f55c7bac9e0b4a Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Use kB instead of MB for the partition size to get a better granularity.
This is needed on some SoC (i.mx, omap) where it is necessary to create
partitions as small as 64kB.
Keep the backward compatibility by assuming MB when no unit is provided.
Change-Id: Ie0d619801d5f6d81fb3159bd6e71d0e574f2471b Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Maciej Borzecki [Wed, 4 Feb 2015 10:53:07 +0000 (11:53 +0100)]
wic: bail out on kickstart parse errors
Kickstart file errors are not emitted by the parser. In case errors, the
current code will continue to execute possibly creating a faulty or
incomplete image. The patch enables the parser to emit all encountered
errors. The error message is shown for the user and further execution is
ceased.
Change-Id: Iace5723c5faf1f207b55cdf98c849ce92c85c777 Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Maciej Borzecki [Fri, 9 Jan 2015 13:24:02 +0000 (14:24 +0100)]
wic: fix extended/logical partition layout
The patch fixes an issue in laying out extended and logical partitions
by wic. The original code produced disk images in which the size 3rd
partition as described in MBR was incorrect. Depending on the type of
file system used for that partition and size of the partition, it would
be impossible to mount the partition correctly. For instance, kickstart
file in which the 3rd partition had size of 1GB and used ext4 fs, would
result in an image with an umountable partition. The root cause is
reservation of sectors for EBR through stealing of last sector from the
last primary partition.
Change-Id: I3d4e0dcc5981f63a8ae487047e53da26853286bb Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Maciej Borzecki [Mon, 22 Dec 2014 14:28:02 +0000 (15:28 +0100)]
wic: account for mmcblk device partition naming
MMC block device partitions are named differently than other block
devices and use the scheme: mmcblk<devnum>p<partnum>, ex: mmcblk0p1,
mmcblk0p2. The current code generates incorrect parition names missing
'p' infix for fstab entries. The patch resolves this problem.
Change-Id: Ia2317275b92ec61c25b8798a71e398f572e5d39d Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Maciej Borzecki [Wed, 10 Dec 2014 11:45:57 +0000 (12:45 +0100)]
wic: add globbing support in IMAGE_BOOT_FILES entries
Adding glob support for entries in IMAGE_BOOT_FILES. Files picked up by
glob are by default installed under their basename, as this is likely
most common use case. Target name for globbed entries specifies the
name of directory in which files will be installed withing the partition.
Change-Id: Ib257604997139436b48e6b4209e673f4cf22be7a Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Paul Eggleton [Wed, 18 Feb 2015 10:23:42 +0000 (10:23 +0000)]
lib/oe/package_manager: support exclusion from complementary glob process by regex
Sometimes you do not want certain packages to be installed when
installing complementary packages, e.g. when using dev-pkgs in
IMAGE_FEATURES you may not want to install all packages from a
particular multilib. This introduces a new PACKAGE_EXCLUDE_COMPLEMENTARY
variable to allow specifying regexes to match packages to exclude.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Thu, 29 Jan 2015 20:44:20 +0000 (12:44 -0800)]
systemd: Backports fixes to 216
Fix systemd-timesyncd assertion
when networkd is disabled then we now do not
create /run/systemd/netif/links but timesyncd needs it. So lets
manually create this file when networkd is disabled so timesyncd
can still function
When enabling systemd-timesyncd we need systemd-timesync user
Backport patches to enable timesyncd when resolved and networkd
are disabled
replace the resolv.conf symlinink patch with a proper backport
Sona Sarmadi [Fri, 16 Jan 2015 10:16:03 +0000 (11:16 +0100)]
python: Disables SSLv3
This is related to "SSLv3 POODLE vulnerability" CVE-2014-3566
Building python without SSLv3 support when openssl is built without
any support for SSLv3 (e.g. by adding EXTRA_OECONF = " -no-ssl3" in
the openssl recipes).
Backport from:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=768611#22
[python2.7-nossl3.patch] only Modules/_ssl.c is backported.
Armin Kuster [Sat, 31 Jan 2015 01:15:50 +0000 (17:15 -0800)]
tzdata: update to 2015a including leap second
Changes affecting future time stamps
The Mexican state of Quintana Roo, represented by America/Cancun,
will shift from Central Time with DST to Eastern Time without DST
on 2015-02-01 at 02:00. (Thanks to Steffen Thorsen and Gwillim Law.)
Chile will not change clocks in April or thereafter; its new standard time
will be its old daylight saving time. This affects America/Santiago,
Pacific/Easter, and Antarctica/Palmer. (Thanks to Juan Correa.)
New leap second 2015-06-30 23:59:60 UTC as per IERS Bulletin C 49.
(Thanks to Tim Parenti.)
Changes affecting past time stamps
Iceland observed DST in 1919 and 1921, and its 1939 fallback
transition was Oct. 29, not Nov. 29. Remove incorrect data from
Shanks about time in Iceland between 1837 and 1908.
Some more zones have been turned into links, when they differed
from existing zones only for older time stamps. As usual,
these changes affect UTC offsets in pre-1970 time stamps only.
Their old contents have been moved to the 'backzone' file.
The affected zones are: Asia/Aden, Asia/Bahrain, Asia/Kuwait,
and Asia/Muscat.
Armin Kuster [Sat, 31 Jan 2015 01:15:49 +0000 (17:15 -0800)]
tzcode: update to 2015a leap second changes too
Changes affecting code
tzalloc now scrubs time zone abbreviations compatibly with the way
that tzset always has, by replacing invalid bytes with '_' and by
shortening too-long abbreviations.
tzselect ports to POSIX awk implementations, no longer mishandles
POSIX TZ settings when GNU awk is used, and reports POSIX TZ
settings to the user. (Thanks to Stefan Kuhn.)
Changes affecting build procedure
'make check' now checks for links to links in the data.
One such link (for Africa/Asmera) has been fixed.
(Thanks to Stephen Colebourne for pointing out the problem.)
Changes affecting commentary
The leapseconds file commentary now mentions the expiration date.
(Problem reported by Martin Burnicki.)
Ross Burton [Mon, 1 Dec 2014 16:26:55 +0000 (16:26 +0000)]
python: ensure all of Python is installed in nativesdk
If any part of Python gets installed in a SDK, we need to ensure that all of
Python gets installed to avoid replacing python in the environment with a
minimal package set.
The switch to the fetcher where it added BeautifulSoup revealed
a shortcoming in the python packaged for the self hosting (missing
htmlentitydefs). Here we fix it in the same way as what was done
for buildtools-tarball and include python-modules vs. all the
individual little chunks.
Mark Hatle [Thu, 22 Jan 2015 22:10:34 +0000 (16:10 -0600)]
python-smartpm: Fix attemptonly builds when file conflicts occur
[YOCTO #7299]
When file conflicts occur, the RPM transaction aborts. Instead of
simply accepting the failure, we now identify, capture, and remove
the offending package(s) from the transaction and retry.
For cpio images, do_rootfs() can operate on a dirty '${WORKDIR}/cpio_append'
directory which contains e.g. files from previous builds. This can cause
unwanted files in the image or can break the build.
E.g. when there is a cpio_append/init -> /sbin/init symlink symlink, the
'ln -sf' can fail due to SELinux restrictions:
Patch cleans up 'cpio_append' before executing the 'do_rootfs' task by
adding it to 'cleandirs'. An alternative implementation (which avoids
creation of this empty dir for non-cpio images) might remove it within
IMAGE_CMD_cpio, but this might break builds where people rely on the
existence of this directory (e.g. to add local files).
Mike Looijmans [Sat, 10 Jan 2015 13:46:42 +0000 (14:46 +0100)]
package.bbclass: Let PR server update PKGV, not PV
PV is the package version as we need it to be during the build. PKGV is the
final version as it ends up in the package, and defaults to PV.
The packager handled builds without PR-server by replacing the AUTOINC string
in PKGV, but when the PR-server is being used, the script replaces the contents
of PKGV with the PV if the PV contains "AUTOINC". Thus the packager overrides
any change to PKGV the recipe might have made.
This breaks classes like gitpkgv that provide a correctly numbered PKGV, the
number as calculated by that class will simply be replaced with a 0-based index
from the PR-server.
This patch makes the packager look at the PKGV version instead of the PV, and
update the PKGV only based on the PKGV contents as set by the recipe.
See also the discussion here:
http://lists.openembedded.org/pipermail/openembedded-core/2015-January/100329.html
From investigating the history of the code and changes in the past year, the
use of "pv" instead of "pkgv" appears to be just an oversight, introduced in:
commit b27b438221e16ac3df6ac66d761b77e3bd43db67 "prs: use the PRServer to replace the BB_URI_LOCALCOUNT functionality"
A later commit 865d001de168915a5796e5c760f96bdd04cebd61 "package/prserv: Merge two similar functions into one"
silently fixed this only for the case without PR-server by using pkgv there.
Richard Purdie [Wed, 21 Jan 2015 17:33:55 +0000 (17:33 +0000)]
net-tools: Fix rerunning of do_patch task
Rerunning the do_patch task currently fails. The code is nearly correct
but needs to remove the quilt ".pc" directory and move the secondary
one into place in order to rerun, not move it into the .pc directory
as the code currently does.
Enrico Scholz [Thu, 22 Jan 2015 16:13:00 +0000 (17:13 +0100)]
image_types.bbclass: fixed 'init' creation for cpio images
When /init is a dangling symlink or a symlink to a file which can not be
stated on the build system (e.g. due to SELinux restrictions), the '[ !
-e .../init ]' test will succeed which causes the manual creation of
/init.
Hongxu Jia [Thu, 22 Jan 2015 09:09:14 +0000 (17:09 +0800)]
distcc: fix initscript can not stop distcc daemon correctly
The distcc's initscript has used option '--pid-file' to save daemon
process id, but it didn't to create that file, that caused start/stop
distcc daemon failed.
We refer what Ubuntu 14.04 did, create pid file before start and
delete it after stop
Richard Purdie [Wed, 21 Jan 2015 11:34:50 +0000 (11:34 +0000)]
lib/oe/package: Ensure strip breaks hardlinks
Normally, strip preserves hardlinks which in the case of the way our hardlink
rather than copy functionality works, is a disadvantage and leads to non-deterministic
builds. This adds a move into place after the strip operation to ensure hardlinks
are broken and we bring back build determinism.
Richard Purdie [Tue, 20 Jan 2015 21:29:41 +0000 (21:29 +0000)]
oeqa/utils/decorators: Try and improve ugly _ErrorHandler tracebacks
Currently, if one module is skipped, any other module calling skipModule
causes tracebacks about _ErrorHandler not having a _testMethodName
method.
This reworks the code in a way to avoid some of the problems by using
the id() method of the objects. It also maps to the correct name
format rather than "setupModule" or just skiping the item entirely.
Robert Yang [Mon, 19 Jan 2015 06:46:29 +0000 (22:46 -0800)]
perf: fix for rebuilding
Fix for rebuilding error:
make[3]: *** No rule to make target `/path/to/sysroots/qemuarm64/usr/src/kernel/tools/lib/traceevent//trace-seq.c',
needed by `.trace-seq.d'. Stop.
make[2]: *** [sub-make] Error 2
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Paul Eggleton [Thu, 22 Jan 2015 14:50:00 +0000 (14:50 +0000)]
gcc: ensure target gcc headers can be included
There are a few headers installed as part of gcc-runtime (omp.h,
ssp/*.h). Being installed from a recipe built for the target
architecture, these are within the target sysroot and not
cross/nativesdk; thus they weren't able to be found by gcc with the
existing search paths. Add support for picking up these headers
under the sysroot supplied on the gcc command line in order to
resolve this.
Thanks to Richard Purdie for giving me a number of pointers during
fixing this issue.
Armin Kuster [Wed, 21 Jan 2015 20:43:11 +0000 (12:43 -0800)]
glibc: CVE-2014-9402 endless loop in getaddr_r
The getnetbyname function in glibc 2.21 in earlier will enter an infinite loop
if the DNS backend is activated in the system Name Service Switch
configuration, and the DNS resolver receives a positive answer while processing
the network name.
