Scott Rifenbark [Thu, 11 Nov 2010 18:59:49 +0000 (10:59 -0800)]
BSP Guide and BSP Chapter in Poky Reference Manual: Changed wording
I created wording in the second paragraph of this file so that it can
fit both the context of the BSP Guide and the BSP chapter of the
Poky Reference Manual.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Thu, 11 Nov 2010 18:54:40 +0000 (10:54 -0800)]
Poky Reference Manual: Changed source location of the bsp.xml file
Because BSP chapter (bsp.xml) is identical to the single file used
in the BSP Guide (also bsp.xml but in the bsp-guide folder) I have decided
to change where the Poky Reference Manual get the bsp.xml file. This commit
causes it to get the file from the bsp-guide folder instead of an identical
but separate bsp.xml file local to the poky-ref-manual folder.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Thu, 11 Nov 2010 18:41:12 +0000 (10:41 -0800)]
Poky Reference Manual: Fixed list tag.
There was a mis-matched list element in an ordered list near the end
of the chapter. I had an <orderedlist> tag matched with an </itemizedlist>
tag preventing the make.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Thu, 11 Nov 2010 18:23:10 +0000 (10:23 -0800)]
BSP Guide and BSP Chapter: Sync'ed these two files
After moving BSP Guide into its own folder for documentation I discovered
a consequence of that. There are two separate bsp.xml files now: one
in the poky-ref-manual folder and one in the bsp folder. I had done some
good cleanup work in the version in the poky-ref-manual folder. This
commit reflects a 'meld' operation where I re-sync'ed the bsp.xml
file in the bsp-guide folder to be the same (almost) as the one in the
poky-ref-manual folder. There is still one slight difference between the
two files due to one's context as a stand-alone manual and the other as
a section in a larger book.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The xsltproc command in the Makefile now uses the XSL Customization
layer style sheet poky-ref-manual-customization.xsl for the style
sheet parameter. This method will allow for customization of the
HTML version formatting that might be unique for the manual. I have
added the new file to the file structure.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Wed, 10 Nov 2010 21:05:37 +0000 (13:05 -0800)]
Poky Reference Manual: Added XSL Customization layer use
The xsltproc command now uses the XSL Customization layer style sheet
poky-ref-manual-customization.xsl for the style sheet parameter. This
method will allow for customization of the HTML version formatting that
might be unique for the manual.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Wed, 10 Nov 2010 20:59:27 +0000 (12:59 -0800)]
Poky Reference Manual: Clean up Makefile
I moved the XSLTOPTS variables to the top of the file so they will
be defined first. This is an attempt to fix the seemingly random
HTML runtime errors I am getting during the 'make html' command.
It seems to be consistently working now.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Wed, 10 Nov 2010 20:48:35 +0000 (12:48 -0800)]
Poky Reference Manual: Fixed broken link in Ref Images appendix.
In the Ref Images appendix there was a link to the section
"External Development Using the Poky SDK" section that did not work
due to the section id string changing. I fixed the link.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Tue, 9 Nov 2010 18:50:21 +0000 (10:50 -0800)]
BSP Guide: Updated xsltproc command to pass the bsp-guide-customization.xsl style sheet.
Because I created the file 'bsp-guide-customization.xsl' to try and eliminate odd
HTML runtime errors and to allow for customized XSL layer of formatting, it was necessary to
update the Makefile to call the new file as the XSL style sheet.
The Yocto Project Quickstart uses this technique and has no HTML build
problems.
HTML build errors seem to be eliminated so far.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Tue, 9 Nov 2010 18:48:17 +0000 (10:48 -0800)]
BSP Guide: I created a new figure for the title page.
Since the BSP Guide is under its own cover I thought it would be good
to have its title page not have the Poky Handbook PNG image. I created
this BSP image for use with the stand-alone BSP Guide.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Tue, 9 Nov 2010 18:44:37 +0000 (10:44 -0800)]
BSP Guide: Created new file for XSL customization expansion.
I created the file 'bsp-guide-customization.xsl' to try and eliminate odd
HTML runtime errors and to allow for customized XSL layer of formatting.
The Yocto Project Quickstart uses this technique and has no HTML build
problems.
HTML build errors seem to be eliminated so far.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Tue, 9 Nov 2010 17:41:05 +0000 (09:41 -0800)]
BSP Guide Makefile: HTML generation debugging edits.
I am getting occasional errors while attempting to make the HTML version
of this manual. The error is generated from line 367 of the html.xsl
style sheet and seems to come from confusion of not finding the css
style sheet parameter. Here is the error from the shell window.
scottrif@scottrif-desktop:~/poky/documentation/bsp-guide$ make html
xsltproc --stringparam html.stylesheet style.css --stringparam chapter.autolabel 1 --stringparam section.autolabel 1 --stringparam section.label.includes.component.label 1 --xinclude -o bsp-guide.html http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl bsp-guide.xml
Note: namesp. cut : stripped namespace before processing
WARNING: cannot add @xml:base to node set root element. Relative paths may not work.
Note: namesp. cut : processing stripped document
runtime error: file http://docbook.sourceforge.net/release/xsl/current/xhtml/html.xsl line 367 element choose
Variable 'generate.css.header' has not been declared.
make: *** [html] Error 10
The odd think is that running "make html" immediately again could cause the
make to be entirely successful.
So this commit involved moving the XSLTOPTS parameters to the top of the
make file and the *_URI parameter declarations to the top as well. This
takes them out of the "pdf" area of the make file and they should be
more universal. The reason I tried this is because I have no such issues
when building the yocto-project-qs HTML file.
However, even with these changes the occasional runtime error (shown above)
still occurs.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Tue, 9 Nov 2010 15:13:40 +0000 (07:13 -0800)]
Added a new PNG file into the tar command.
Since this manual is about BSP and not Poky as is the Poky Reference
Manual I updated the title page to include the title combined with the
Yocto Project logo. So for the background-image url in the .authorgroup
style I replaced the poky-ref-manual.png file with bsp-title.png.
Updates affect both the PDF and HTLM versions of the BSP Guide.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Tue, 9 Nov 2010 15:11:35 +0000 (07:11 -0800)]
Added a new PNG file (bsp-title.png) as the imagedata tag.
Since this manual is about BSP and not Poky as is the Poky Reference
Manual I updated the title page to include the title combined with the
Yocto Project logo. Updates affect both the PDF and HTLM versions
of the BSP Guide.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Scott Rifenbark [Tue, 9 Nov 2010 15:08:58 +0000 (07:08 -0800)]
Added a new PNG file into the tar command.
Since this manual is about BSP and not Poky as is the Poky Reference
Manual I updated the title page to include the title combined with the
Yocto Project logo. Updates affect both the PDF and HTLM versions
of the BSP Guide.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
To streamline BSP bootstrapping, createme now actually
creates the required branch rather than only dumping it
in a .scc file. Later phases of the build will create
the .scc file, so it isn't required here.
Also, a BSP with a '-' in the name would break the parent
branch detection. Improving the parsing of this allows more
flexibile branch naming.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
commit c7d222b4cffb5108d9b14298fc4dc4cae31b784f
Author: Bruce Ashfield <bruce.ashfield@windriver.com>
Date: Thu Nov 11 01:27:33 2010 -0500
updateme: improve parent and target parsing
A BSP with a '-' in the name would break the parent branch
detection. Improving the parsing of this allows more
flexibile branch naming.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Thu, 11 Nov 2010 06:23:38 +0000 (01:23 -0500)]
linux-wrs: implement BSP bootstrapping via fallback branches
When creating a new BSP there isn't always an upstream branch
to validate SRCREVs against. Therefore, creating a new BSP
required extra manipulations of the git repository, even though
the branch for the build would be dynamically created.
To fix this, provide a fallback to the 'standard' branch if
WRMACHINE is not assigned a specific value for the given MACHINE.
The fallback saved in KBRANCH, and represents the branch that
we should build, even if no fallback is required. Some substeps
of the recipe have been updated to use KBRANCH rather than
enforcing MACHINE-KERNELTYPE.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Nitin A Kamble [Mon, 8 Nov 2010 18:34:46 +0000 (10:34 -0800)]
python, python-native upgrade from 2.6.5 to 2.6.6
Removed these patch:
python-native-2.6.5/00-fix-bindir-libdir-for-cross.patch
python/00-fix-bindir-libdir-for-cross.patch
The upstream code has changed, and it does not need the above 2 patches
(fixes) anymore.
Patches rebased to the newer code:
python/01-use-proper-tools-for-cross-build.patch
python/04-default-is-optimized.patch
python/06-avoid_usr_lib_termcap_path_in_linking.patch
python/99-ignore-optimization-flag.patch
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Gary Thomas [Thu, 4 Nov 2010 11:34:12 +0000 (05:34 -0600)]
image.bbclass/initscripts: Make /etc/timestamp usage consistent.
Timestamp is kept in UTC
Remove superfluous 'create_etc_timestamp()' function
- seems to be a duplicate of 'rootfs_update_timestamp()'
Remove External function reference
[sgw@linux.intel.com: merged 2 patches and cleanup commit message]
Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Darren Hart [Sat, 6 Nov 2010 14:06:11 +0000 (10:06 -0400)]
git-pull: add send-pull-request script
send-pull-request facilitates sending pull requests generated by
create-pull-request. The primary role of this script is to harvest email
addresses from the patches and send them out. A working installation of sendmail
(exim, postfix, msmtp, etc.) is required to use this script.
You can explicitly specify To addresses with the -t option. As this can be
tedious, the -a option will scan all the patches for To, CC, and *-by lines and
the collected addresses to the To and CC headers for each patch.
This script uses an identical recipients list for every patch, including the
cover letter. This is by design. Existing tools will auto-generate the CC header
for individual patches, but since they don't apply it to the other patches, the
recipients can lack the necessary context to provide a meaningful review. This
is especially true of the cover letter.
The pull directory generated by the create-pull-request script is specified
using the -p option.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Nitin A Kamble <nitin.a.kamble@intel.com> CC: Richard Purdie <rpurdie@linux.intel.com> CC: Saul Wold <saul.wold@intel.com> CC: Bruce Ashfield <bruce.ashfield@windriver.com>
Darren Hart [Sat, 6 Nov 2010 13:42:28 +0000 (09:42 -0400)]
git-pull: add the new create-pull-request script
The previous create-pull-request only generated a cover letter. When used to
send to the list, it did not include the patches, which made it difficult
to perform peer review. A pull request without patches is typically only sent
by a maintainer. As we are not all maintainers, we need a means to easily
submit patches for review.
As we are accustomed to making pull requests, this script retains a
git-pull-style cover letter, while sending the relevant patches as responses
to the pull. This will provide the necessary context for peer review, and still
allow people to collapse threads and see no more mail than they were previously.
This version retains the relative_to, commit_id, and contrib_branch arguments
from the original, along with their default values. It adds several more,
resulting in a highly flexible tool.
The script creates a pull directory (pull-$$ by default, configurable via the -o
option) and populates it with a git-format-patch generated patch series and
cover letter. The cover letter is modified to include the git and http pull URLs
and branch name, as well as a basic signature from the author pulled from git's
user.name and user.email config. git-format-patch provides the shortlog and
diffstat of the series.
Breaking a bit from the original, this script maintains the [PATCH] subject
prefix in the cover letter (as opposed to [GIT PULL]. This is better suited to
the majority of developers (who are not maintainers). This prefix is
configurable with the -p option, allowing you to create an [RFC PATCH]
prefix, for example.
By default, the generated cover letter with contain "*** SUBJECT HERE ***" and
"*** BLURB HERE ***" tokens which you should replace with something
appropriate prior to sending the messages.
When developing multiple versions of a patch series, it can save time to
maintain a message.txt file, rather than having to retype the message body of
the cover letter every time. The -m option allows you to specify a message file
and replace the "*** BLURB HERE ***" token of the cover letter with the contents
of the message file.
Finally, the -s option will replace the "*** SUBJECT HERE ***" token in the cover
letter with the specified subject.
The generated patches are suitable for sending via sendmail.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Nitin A Kamble <nitin.a.kamble@intel.com> CC: Richard Purdie <rpurdie@linux.intel.com> CC: Saul Wold <saul.wold@intel.com> CC: Bruce Ashfield <bruce.ashfield@windriver.com>
Darren Hart [Sat, 6 Nov 2010 13:35:37 +0000 (09:35 -0400)]
git pull: remove the existing create_pull_request script
The patches to follow completely rewrite the existing create-pull-request.
Rather than have an initial diff of the two files (which are not at all
similar) remove the original, and then create the new one.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Nitin A Kamble <nitin.a.kamble@intel.com> CC: Richard Purdie <rpurdie@linux.intel.com> CC: Saul Wold <saul.wold@intel.com> CC: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Fri, 29 Oct 2010 16:13:23 +0000 (12:13 -0400)]
kernel: prefer the kernel produced uImage
The custom uImage produced by the kernel classes by default
does not universally boot and working with existing uboot
configurations and setups.
This changes the preference to the uImage constructed by
the kbuild processes and falls back to the other techniques
if uImage is requested by the kernel does not produce one.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Thu, 14 Oct 2010 02:41:50 +0000 (22:41 -0400)]
linux-wrs: rename force_revisions and allow override
It is useful to override revision checking from a layer or other
recipe. In order to show the global nature of the variable rename
it KERNEL_REVISION_CHECKING and make it a weak assignment.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Mon, 8 Nov 2010 20:17:29 +0000 (15:17 -0500)]
qemumips: re-enable wacom and standard USB UI options
Fixes [BUGID #394]
Now that the qemu/mti mips kernel branches have been fixed
for wacom USB interaction, we can re-nable the standard set
of qemu UI options for qemumips.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
