Maxin B. John [Tue, 26 Apr 2016 08:48:25 +0000 (11:48 +0300)]
libxml2: fix dependencies and QA Issues
Fix the following QA warnings:
WARNING: libxml2-2.9.3-r0 do_package_qa: QA Issue: libxml2 rdepends on
libiconv, but it isn't a build dependency, missing libiconv in DEPENDS
or PACKAGECONFIG? [build-deps]
WARNING: libxml2-2.9.3-r0 do_package_qa: QA Issue: libxml2-python
rdepends on libiconv, but it isn't a build dependency, missing libiconv
in DEPENDS or PACKAGECONFIG? [build-deps]
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com>
Maxin B. John [Tue, 26 Apr 2016 08:48:24 +0000 (11:48 +0300)]
bash: fix dependencies and QA Issue
Fix the following QA warning:
WARNING: bash-4.3.30-r0 do_package_qa: QA Issue: bash rdepends on libiconv,
but it isn't a build dependency, missing libiconv in DEPENDS
or PACKAGECONFIG? [build-deps]
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com>
Maxin B. John [Tue, 26 Apr 2016 08:48:23 +0000 (11:48 +0300)]
popt: fix dependencies and QA Issue
Fix the following QA warning:
WARNING: popt-1.16-r3 do_package_qa: QA Issue: popt rdepends on
libiconv, but it isn't a build dependency, missing libiconv in DEPENDS
or PACKAGECONFIG? [build-deps]
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com>
Ross Burton [Wed, 27 Apr 2016 08:28:35 +0000 (09:28 +0100)]
qemu: remove explicit but redundant native build dependencies
qemu-native was optionally depending on libxext-native if the DISTRO_FEATURES
included x11. This dependency was required back when we didn't build
libsdl-native and causes an undesirable relationship between DISTRO_FEATURES and
qemu-native.
As the dependency isn't required anymore, remove it.
Paul Eggleton [Wed, 27 Apr 2016 13:06:19 +0000 (01:06 +1200)]
recipetool: create: fix falling back to declared license for npm packages
Fix two problems falling back to the "license" field from package.json
when no license file is present:
1) The function that was supposed to return the license field value was
always explicitly returning None, and this was never noticed (because
the test cases never exercised the fallback as they provided license
files for each module).
2) Fix the main package not falling back because it had a default of an
empty list, which evaluates to '' instead of 'Unknown'.
Paul Eggleton [Wed, 27 Apr 2016 13:06:18 +0000 (01:06 +1200)]
recipetool: create: fix picking up false npm package directories
It is possible for a Node.js module to have node_modules subdirectories
that contain no package.json file (e.g. iotivity-node has such a
directory). It appears these should simply be ignored, or else with the
way the current code works we will get errors later.
armv7a is a subset of armv7ve:
https://gcc.gnu.org/onlinedocs/gcc/ARM-Options.html
-march=armv7ve is the armv7-a architecture with virtualization extensions.
By inheriting armv7a from armv7ve it's possible for e.g. Cortex-A15 machines
to include tune-cortexa15.inc and have a full range of optimizations, but
set DEFAULTTUNE as "armv7a" to produce binaries compatible with Cortex-A8
machines, etc.
packagegroup-core-lsb: fix whitespace in meta-qt* warnings
Without these extra space characters the messages are ill-formatted, i.e:
'The meta-qt3 layer should be added, this layer provides Qt 3.xlibraries.
Its intended use is for passing LSB tests as Qt3 isa requirement for LSB.'
Changes to:
'The meta-qt3 layer should be added, this layer provides Qt 3.x libraries.
Its intended use is for passing LSB tests as Qt3 is a requirement for LSB.'
The current recipe creates inittab labels based off the device node name
of TTYs used as consoles. If those names exceed the 4 character label
limit of inittab, it will break. This change takes the last 4 chars of
the device names in order to avoid any errors.
Signed-off-by: Alexander D. Kanevskiy <kad@kad.name> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com>
wic: isoimage-isohybrid: add grubefi configfile support
The latest wic kickstart refactoring introduced a bootloader option
"--configfile" which lets wks' specify a custom grub.cfg for use
while booting. This is very useful for creating stuff like boot menus.
This change lets isoimage-isohybrid use --configfile; if this option is
not specified in a wks, it generates a default cfg as before.
Ross Burton [Wed, 20 Apr 2016 15:54:37 +0000 (16:54 +0100)]
busybox: don't build ar
As it's not 1978 anymore, nobody is using ar for anything apart from static
archives. If people are using static archives, then binutils provides a far
more capable ar.
Dengke Du [Tue, 19 Apr 2016 08:55:53 +0000 (04:55 -0400)]
bash: fixed ptest run-builtins failed
1. redirect the stderr output of the command exec with -l option to
/dev/null.
Because when we run command exec with -l option in builtins.tests,
it is a login shell, so it would read the file /etc/profile, that
file executes the /usr/bin/resize which added by commit: cc6360f4c4d97e0000f9d3545f381224ee99ce7d
The /usr/bin/resize is produced by busybox that source code resize.c
contains:
fprintf(stderr, ESC"7" ESC"[r" ESC"[999;999H" ESC"[6n");
In the end, it outputs an escape sequence to the stderr, so when we
compare the test output file /tmp/xx with builtins.right, it failed.
we need to redirect the stderr output to the /dev/null to solve the
problem.
2. ensure the target system contains the locales "en_US.UTF-8".
Because when run the run-builtins, it executes the source5.sub file
that contain:
LC_ALL=en_US.UTF-8
such as add the following to the local.conf:
IMAGE_LINGUAS_append = " en-us"
IMAGE_CMD_xxx commands are always inlined within do_image_xxx.
When IMAGE_CMD_xxx is defined as a function (e.g. IMAGE_CMD_btrfs,
IMAGE_CMD_cpio, etc), a redundant copy of the function will be emitted
by default. Remove IMAGE_CMD_xxx 'func' flags to prevent that.
linux-firmware: break out bnx2 mips firmware and WHENCE license
Break out the bnx2 mips firmware into an independent subpackage.
Since the bnx2 firmware license is contained in the common WHENCE file
also package that separately so that other firmware that is licensed
within that file may depend upon a standalone package containing it.
do_split_package() constructs a list of packages that were created as it
iterates through the files, so if multiple files go into the same package then
the package will be repeated in the output.
Solve this by using a set() to store the created packages so that duplicates are
ignored.
Ruslan Bilovol [Wed, 13 Apr 2016 18:17:20 +0000 (21:17 +0300)]
kernel-uimage: change target image to vmlinux
Commit e69525: "kernel: Build uImage only when really
needed" hardcoded target kernel image to zImage for
case if uImage is generated by OpenEmbedded buildsystem.
However not all kernel architectures support zImage
target, for example AArch64 doesn't, so building of
kernel is failing on this step.
So instead of building zImage target that may not
exist for many architectures, build vmlinux target
that exists for all architectures.
Since kernel-uboot.bbclass uses vmlinux anyway for
creating image, there is no side effect on this change.
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com>
Saul Wold [Thu, 19 May 2016 22:24:13 +0000 (15:24 -0700)]
gdb: Backport patch to changes with AVX and MPX
The current MPX target descriptions assume that MPX is always combined
with AVX, however that's not correct. We can have machines with MPX
and without AVX; or machines with AVX and without MPX.
This patch adds new target descriptions for machines that support
both MPX and AVX, as duplicates of the existing MPX descriptions.
The following commit will remove AVX from the MPX-only descriptions.
This commit is backported from 7.12
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Anders Darander [Tue, 3 May 2016 11:57:16 +0000 (13:57 +0200)]
lib/oe/rootfs: Fix DEBUGFS generation for opkg & openssl-cnf
When enabling extra DEBUGFS image generation with opkg, the following error is
seen when openssl-cnf is included in the image.
Collected errors:
* file_md5sum_alloc: Failed to open file /mnt/cs-builds/anders/oe-build/build-ccu/tmp/work/ccu-oe-linux-gnueabi/ccu-image/1.0-r0/rootfs/usr/lib/ssl/openssl.cnf: No such file or directory.
Signed-off-by: Anders Darander <anders@chargestorm.se> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 9 May 2016 13:12:16 +0000 (14:12 +0100)]
update-alternatives: Fix determinism issue
getVarFlags returns a dict and there is therefore no sort order. This
means the order of the X_VARDEPS_X variables can change and hence the
task checksums can change. This can lead to rebuilds of any parts of
the system using update-alternatives and their dependees. This is a
particular issue under python v3.
Add in a sort to make the order of the variables deterministic.
Richard Purdie [Mon, 9 May 2016 13:09:37 +0000 (14:09 +0100)]
image: Fix IMAGE_FEATURES determinism issue
remain_features uses a dict which means the order is not deterministic. This
can lead to the task hash changing depending on the state of the memory at
parse time. This is particularly noticeable under python v3.
Since the dict is helpful in constructing the data, pass the data through
sort() so the order is always deterministic.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com>
Bruce Ashfield [Fri, 29 Apr 2016 17:05:14 +0000 (13:05 -0400)]
linux-yocto/4.4: skylake configuration
Integrating the following patches for skylake features and config:
82c2ea9f6bf intel-common: enable support for skylake in intel common bsp 269b6a7a98e2 intel-common-drivers: enable OSS Support 71a19d3e6dc6 intel-pinctrl: enable pinctrl driver for skylake 281f7db8c839 features: soc: enable configurations for skylake.
Bruce Ashfield [Fri, 22 Apr 2016 19:03:24 +0000 (15:03 -0400)]
linux-yocto/4.1: make ltsi content available
In the better late than never category, this commit integrates the
ltsi content into linux-yocto 4.1. We we already matching LTSI on
the kernel version front with a small gap in patches. With this
commit, we have a "ltsi" branch that is pure ltsi on the mailine
kernel, and then that commit is merged into standard/base (to
make it available to all BSPs).
Bruce Ashfield [Thu, 21 Apr 2016 15:23:45 +0000 (11:23 -0400)]
kernel-yocto: allow branch auditing to be suspended
When working on the yocto-bsp and kernel-lab update for yocto 1.2
we found it was impossible for a end-user BSP to isolate patches
on a branch, since with the following commit:
[kernel-yocto: enforce SRC_URI specified branch]
Any new branch would be switched to whatever was specified on the
SRC_URI and undoing the work that the yocto-bsp tool did to support
board specific patches.
To fix this, we'll keep the enforcing of branch consistency enabled
by default, but introduce a variable "KMETA_AUDIT" that when not
set will skip the check.
There's no impact for existing users, and it is only something that
other plumbing commands and tools will need to use (or care about).
There was a bug in the tools that did not handle the mix of subdirs
properly and ended up leaving a trailing / on the elements *not* in
the $BOARD subdir. As a result, the configuration fragments were not
properly found when searching the include paths, and a configuration
failure was triggered (due to missing files).
This change tweaks the tools to always check a path with and without
a trailing / when processing config fragments so they can be later
found when processing the configuration of the kernel.
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com>
Bruce Ashfield [Wed, 20 Apr 2016 23:30:07 +0000 (19:30 -0400)]
linux-yocto/uvesafb: print error message when task timeout occurs
Integrating the following commit to have a more informative error
message:
uvesafb: print error message when task timeout occurs
The driver waits for response from user space for a pending
task until a timeout (UVESAFB_TIMEOUT) occurs. But the
existing error message in later steps is a little obscure.
This patch throws out an error message when timeout happens.
Configure autodetects libtomcrypt, but then it adds libtommath to
$LIBS and fails to link subsequent tests if it's unavailable.
| checking for pcre.h... yes
| checking for pcre_compile in -lpcre... no
| checking whether to build with PCRE library... no
| ++ executing failure action
| configure: error: unable to find usable PCRE library
Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
gobject-introspection: fix floating dep on python-mako
This was resulting in non-deterministic builds where g-ir-doc-tool may or may
not exist depending on whether python-mako was built previously. Add
a PACKAGECONFIG so the dependency is explicit.
Signed-off-by: Sujith H <sujith.h@gmail.com> Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Sujith Haridasan <Sujith_Haridasan@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
sdk.py: preserve packaging data when SDKIMAGE_FEATURES has "package-management"
This is not enabled by default, as there are still limitations and possible
issues with opkg (and rpm?) packaging data containing broken symlinks for
local indexes:
There are other use cases for the packaging data to be available in SDK,
since it provides comprehensive info about SDK's contents and in the case of
opkg and dpkg is all text-based and can be easily parsed by simple scripts.
Introduce new "package-management" flag for SDKIMAGE_FEATURES list (similar
to the one already used for IMAGE_FEATURES) that controls presence of the
packaging data in resulting SDK, while unifying this behavior across the
board for supported pkg managers - rpm, opkg, dpkg.
Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Fri, 22 Apr 2016 13:51:22 +0000 (14:51 +0100)]
lib/oe/rootfs: Fix DEBUGFS generation when using opkg
When enabling extra DEBUGFS image generation with opkg, errors are seen like:
ERROR: core-image-minimal-1.0-r0 do_rootfs: Cannot get the installed packages list. Command '/media/build1/poky/build/tmp/sysroots/x86_64-linux/usr/bin/opkg -f /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/opkg.conf -o /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs --force_postinstall --prefer-arch-to-version status' returned 0 and stderr:
Collected errors:
* file_md5sum_alloc: Failed to open file /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs/etc/syslog-startup.conf.busybox: No such file or directory.
* file_md5sum_alloc: Failed to open file /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs/etc/fstab: No such file or directory.
basically for all CONFFILES in the image. This is due to the file rearranging
the rootfs generation code does. If we preserve the /etc directory,
the avoids the problem.
We need to tell copyfile to preserve symlinks since some are present in /etc.
[YOCTO #9490]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 19 Apr 2016 16:20:19 +0000 (17:20 +0100)]
boost: improve configure
Instead of adding a custom task (do_boostconfig) simply use the existing
do_configure.
Ensure that there are no relative paths in do_configure.
Instead of editing the user-config.jam sample file in the source tree (which is
entirely comments) and extending it on every build, create a new user-config.jam
in ${WORKDIR}.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 19 Apr 2016 16:07:59 +0000 (17:07 +0100)]
boost: delete the build directory before rebuilding
If there is an existing build directory when do enter do_compile() then delete
it, as it contains the previous build. If the rebuild was caused because
dependencies have changed we want to ensure that a rebuild actually happens.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Thu, 21 Apr 2016 11:03:26 +0000 (14:03 +0300)]
license.bbclass: make sure that image manifest dir exists
Previously, write_deploy_manifest() was relying on
write_package_manifest() to create the subdirectory for the manifest
file. However, do_rootfs may be an empty function so that
write_package_manifest() will not be called and the manifest
subdirectory will not be created, causing a build failure. This patch
fixes that by creating the directory hierarchy inside
write_deploy_manifest().
[YOCTO #9446]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Maxin B. John [Thu, 21 Apr 2016 09:24:07 +0000 (12:24 +0300)]
busybox: update flock behavior to match upstream
In "util-linux" implementation of flock, -c 'PROG ARGS' means run
"sh -c 'PROG ARGS'". At present, busybox implementation doesn't follow it.
That causes errors like the one listed below:
smart install /media/cronie-1.5.0-r0.core2_64.rpm
Updating cache...
<snip>
Output from cronie-1.5.0-r0@core2_64:
Running groupadd commands...
NOTE: cronie: Performing groupadd with [ --system crontab]
ERROR: cronie: groupadd command did not succeed.
error: %pre(cronie-1.5.0-r0.core2_64) scriptlet failed, exit status 1
error: install: %pre scriptlet failed (2), skipping
cronie-1.5.0-r0.core2_64
This is because we use flock command in preinstall scripts in packages
which create new groups/users.
[YOCTO #9496]
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Attempting to install ptest for valgrind fails with this error:
error: Can't install valgrind-ptest-3.11.0-r0.1@ppce500mc: no package
provides /this/is/a/bogus/interpreter/name
This is because one of the tests contains a bogus interpreter path on purpose
It is not enough to skip the QA warning about the missing dependency
but the dependency have to be completely removed.
Since this package contains oly tests it is safe to disable per file
dependencies and rely on the ones per package.
Signed-off-by: Tudor Florea <tudor.florea@enea.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
America/Caracas switches from -0430 to -04 on 2016-05-01 at 02:30.
(Thanks to Alexander Krivenyshev for the heads-up.)
Asia/Magadan switches from +10 to +11 on 2016-04-24 at 02:00.
(Thanks to Alexander Krivenyshev and Matt Johnson.)
New zone Asia/Tomsk, split off from Asia/Novosibirsk. It covers
Tomsk Oblast, Russia, which switches from +06 to +07 on 2016-05-29
at 02:00. (Thanks to Stepan Golosunov.)
Changes affecting past time stamps
New zone Europe/Kirov, split off from Europe/Volgograd. It covers
Kirov Oblast, Russia, which switched from +04/+05 to +03/+04 on
1989-03-26 at 02:00, roughly a year after Europe/Volgograd made
the same change. (Thanks to Stepan Golosunov.)
Russia and nearby locations had daylight-saving transitions on
1992-03-29 at 02:00 and 1992-09-27 at 03:00, instead of on
1992-03-28 at 23:00 and 1992-09-26 at 23:00. (Thanks to Stepan
Golosunov.)
Many corrections to historical time in Kazakhstan from 1991
through 2005. (Thanks to Stepan Golosunov.) Replace Kazakhstan's
invented time zone abbreviations with numeric abbreviations.
Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
they keep the versions in-sync. changes are all in data.
Changes affecting future time stamps
America/Caracas switches from -0430 to -04 on 2016-05-01 at 02:30.
(Thanks to Alexander Krivenyshev for the heads-up.)
Asia/Magadan switches from +10 to +11 on 2016-04-24 at 02:00.
(Thanks to Alexander Krivenyshev and Matt Johnson.)
New zone Asia/Tomsk, split off from Asia/Novosibirsk. It covers
Tomsk Oblast, Russia, which switches from +06 to +07 on 2016-05-29
at 02:00. (Thanks to Stepan Golosunov.)
Changes affecting past time stamps
New zone Europe/Kirov, split off from Europe/Volgograd. It covers
Kirov Oblast, Russia, which switched from +04/+05 to +03/+04 on
1989-03-26 at 02:00, roughly a year after Europe/Volgograd made
the same change. (Thanks to Stepan Golosunov.)
Russia and nearby locations had daylight-saving transitions on
1992-03-29 at 02:00 and 1992-09-27 at 03:00, instead of on
1992-03-28 at 23:00 and 1992-09-26 at 23:00. (Thanks to Stepan
Golosunov.)
Many corrections to historical time in Kazakhstan from 1991
through 2005. (Thanks to Stepan Golosunov.) Replace Kazakhstan's
invented time zone abbreviations with numeric abbreviations.
Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Otavio Salvador [Tue, 19 Apr 2016 20:17:39 +0000 (17:17 -0300)]
syslinux.bbclass: Remove APPEND from variable dependency
The value of APPEND is already being tracked and does impact on the
generated configuration file. This reverts the OE-Core:3c2d7ae5 commit
as it is not need anymore.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Tue, 19 Apr 2016 19:34:00 +0000 (16:34 -0300)]
syslinux.bbclass: The AUTO_SYSLINUXMENU value needs to be boolean
The python code expects AUTO_SYSLINUXMENU to be a boolean value,
otherwise the logic fails. This fixes the code comparing the value to
"1" which is the value expected by the shell script code, counterpart.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
