Fathi Boudra [Fri, 2 Aug 2013 09:08:20 +0000 (12:08 +0300)]
libc-package.bbclass: Add armeb architecture to locale_arch_options
Fix gconv build failure on ARM big-endian architecture:
ERROR: locale_arch_options not found for target_arch=armeb
ERROR: Function failed: unknown arch:armeb for locale_arch_options
Ross Burton [Fri, 2 Aug 2013 12:15:07 +0000 (13:15 +0100)]
buildhistory: add a note when committing to buildhistory
If there's been a lot of changes the commit to buildhistory can take a
significant amount of time, so print a note so there's some indication of
progress.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Chen Qi [Fri, 2 Aug 2013 03:37:08 +0000 (11:37 +0800)]
buildtools-tarball: do not export OECORE_NATIVE_SYSROOT
When building a qemu image inside the environment created by the
buildtools-tarball, the qemu image cannot be started, as the runqemu
script uses the tunctl binary which cannot be found inside the sysroot
directory of the buildtools-tarball.
The buildtools-tarball is inherently a tool set instead of a fully
functional SDK, so leaving the OECORE_NATIVE_SYSROOT variable in the
environment will mess things up.
However, we do need a line of 'OECORE_NATIVE_SYSROOT=xxx' in the environment
setup script so that the SDK can be extracted and relocated correctly.
Thus, instead of exporting OECORE_NATIVE_SYSROOT, we use a comment here.
Paul Eggleton [Thu, 1 Aug 2013 17:17:59 +0000 (18:17 +0100)]
grub: disable floating ncurses dependency for GPLv2 version
A dependency was being added on ncurses conditionally upon whether it
had been built first. Explicitly disable this dependency to stop this
from happening.
Note that grub 2.x does not need this same fix because there ncurses is only
used when building grub-emu, which is only built when the specified
target platform is "emu" which we do not use.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Thu, 1 Aug 2013 17:17:16 +0000 (18:17 +0100)]
classes/sanity: check for suid root command evility
Some users have been found to have an unnamed third-party piece of
software installed which sets chmod, chown and mknod as suid root as
part of its installation process. This interferes with the operation of
pseudo and can result in files really being owned by root within the
build output, and therefore breaks the build, apart from being a
security issue. Check for this and bail out if it is found.
Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
This patch groups x11 dependent tools in a separete variable,
and when DISTRO_FEATURES does not contain x11, this group is
not included in the package RDEPENDS.
Ross Burton [Thu, 1 Aug 2013 10:07:36 +0000 (11:07 +0100)]
u-boot: state the MACHINE when skipping u-boot
If the user accidently tries building u-boot on a machine doesn't use u-boot
(such as qemuarm) the error message doesn't make it clear why u-boot was
skipped. To help, state the machine that was being built for again.
[ YOCTO #4945 ]
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
fix-O0-Optimize-unable-inline-function.patch,
obsolete_automake_macros.patch patches
included in upstream; removed.
unbreak_plugindir.patch not used, removed.
Licence MD5 changed because some years were updated and some new people
added their own copyright text which, apparently, is similar with what
already exists in the file.
Paul Barker [Mon, 29 Jul 2013 07:28:32 +0000 (08:28 +0100)]
opkg: Bump SRCREV as patch has been applied upstream
The previous patch to fix the installation of libopkg headers has been accepted
upstream and is the next commit after the SRCREV used by the opkg recipe.
Therefore the patch can be replaced by a simple update of the SRCREV.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Ross Burton [Tue, 30 Jul 2013 13:48:34 +0000 (14:48 +0100)]
bluez5: Add obex-profiles as a PACKAGECONFIG, package obexd separately
--enable-obex controls if obexd supports extra profiles (currently IRMC and
PBAB), which brings in a dependency on libical for the dummy phonebook
implementation.
Based on work by Saul Wold <sgw@linux.intel.com>.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Muhammad Shakeel [Thu, 25 Jul 2013 10:02:04 +0000 (15:02 +0500)]
avahi: Remove unnecessary runtime dependency on sysvinit-pidof
'pidof' is alternatively coming from busybox so no need for avahi to explicitly
rdepend on sysvinit-pidof. This unnecessarily includes sysvinit in systemd only
build.
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Stefan Stanacar [Wed, 24 Jul 2013 08:43:18 +0000 (11:43 +0300)]
oeqa/utils/sshcontrol: increase and log timeout in output
Increase a bit the timeout for ssh commands and also
write in the output that the command timed out (it's
easier to see that in a test fail than checking the ssh log)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
- COPYING was slightly reformated (whitespace changes only)
- rebased patches
- remove upstreamed patches
- added pod2texi to texinfo package
- get all man pages from man1 and man5
The dbus build tests the build host to detect what initscript
environment it expects. Remove the test and set it to "redhat"
unconditionally as the oe-core initscript has a redhat-style pid file
path.
Signed-off-by: Andy Ross <andy.ross@windriver.com Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Colin Walters [Mon, 29 Jul 2013 12:43:14 +0000 (08:43 -0400)]
util-linux: Update for swapoff being a separate binary
In older versions of util-linux, swapon and swapoff were the
same binary, and it did runtime detection. But since v2.22
which is util-linux commit 6cf8d46ceefe9a7, they are separate
binaries.
This patch is necessary to make the util-linux version of
swapoff work at all - currently in OE swapoff = swapon, which
is clearly broken =)
Probably most OE consumers use the busybox swapoff and hence
this has gone unnoticed.
Signed-off-by: Colin Walters <walters@verbum.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
csl-versions.inc: instruct user to check local.conf
In case the compiler version cannot be extracted instruct user to check
that the toolchain supports MACHINE's architecture and that the latter
is set correctly in local.conf.
distrodata.bbclass: Include PRSPV variable in upstream version checking
The PRSPV variable is used for the packages that have different
representation for a same upstream and local version (e.g 2.0 vs 20).
In this case, the system is using PRSPV instead of PV when comparing
the local and upstream versions.
The packages that are using this modification are the following:
* zip
* unzip
* docbook-sgml-dtd-3.1-native
* docbook-sgml-dtd-4.1-native
Peter Seebach [Fri, 26 Jul 2013 12:49:36 +0000 (07:49 -0500)]
pseudo: Always try to build 32-bit libpseudo when NO32LIBS is set to 0
This is for Yocto bug #4920. The NO32LIBS variable is intended to allow
the user to force the creation of a 32-bit libpseudo, for use with things
like prebuilt binary toolchains. Unfortunately, the tests for likely
compilability (stubs-32.h) were still present, so you would get silent
failures. And if you did cause it to try to build, the failures were not
particularly clearly explained.
So, we:
1. Emit at least a message during configuration saying we're only
building 64-bit, if we are.
2. Warn the user for at least one common case where we know builds
are likely to fail.
3. If NO32LIBS is 0, we try the compile for sure, and if it fails,
we've emitted at least some sort of message up near the top of the
compile output that tells you what might be wrong.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Muhammad Shakeel [Mon, 29 Jul 2013 08:09:51 +0000 (13:09 +0500)]
systemd: Remove init.d dir if systemd unit file is present and sysvinit not a distro feature
If systemd is supported DISTRO_FEATURE and sysvinit is not and also if
systemd_unitdir contains anything then no need to keep init.d scripts
for sysvinit compatibility.
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Jukka Rissanen [Mon, 29 Jul 2013 08:29:41 +0000 (11:29 +0300)]
bluez5: Only install .conf files if found
Bluez5 is migrating away from using separate .conf files
for different profiles. So only install profile configuration files
when they are found. This is needed so that the bluez5.inc file
can be used with latest bluez5 from git.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
ERROR: Multiple .bb files are due to be built which each provide virtual/libc (/srv/hdd/releases/dylan/meta/recipes-core/eglibc/eglibc_2.17.bb /srv/hdd/releases/dylan/meta/recipes-core/meta/external-sourcery-toolchain.bb).
This usually means one provides something the other doesn't and should.
ERROR: Multiple .bb files are due to be built which each provide virtual/arm-none-linux-gnueabi-libc-for-gcc (/srv/hdd/releases/dylan/meta/recipes-core/eglibc/eglibc_2.17.bb /srv/hdd/releases/dylan/meta/recipes-core/meta/external-sourcery-toolchain.bb).
This usually means one provides something the other doesn't and should.
ERROR: Multiple .bb files are due to be built which each provide virtual/libiconv (/srv/hdd/releases/dylan/meta/recipes-core/eglibc/eglibc_2.17.bb /srv/hdd/releases/dylan/meta/recipes-core/meta/external-sourcery-toolchain.bb).
This usually means one provides something the other doesn't and should.
Thanks to Kergoth (Chris Larson) and Lpapp (Lazslo)
Paul Eggleton [Wed, 24 Jul 2013 16:26:08 +0000 (17:26 +0100)]
classes/rootfs_rpm: implement BAD_RECOMMENDATIONS for RPM
Add support for the BAD_RECOMMENDATIONS variable that can be used to
prevent specific packages from being installed via an RRECOMMENDS
relationship when using the RPM backend. (Previously this
functionality was only available when using ipk packaging.)
In the process this moves the defaulting of BAD_RECOMMENDATIONS (as
empty) to bitbake.conf since it is no longer specific to the ipk
backend, as well as unifying some of the code that creates the
configuration for smart for use on the host and target.
Fixes [YOCTO #3916].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Use runtime remapping on BAD_RECOMMENDATIONS just as we do with
variables such as IMAGE_INSTALL, so that we're specifying the name prior
to any renaming e.g. that done by debian.bbclass. Note that this is a
change in behaviour for renamed packages, however this is the correct
thing to be doing; a search of existing layers suggests this shouldn't
cause widespread incompatibilities.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Wed, 24 Jul 2013 11:06:37 +0000 (12:06 +0100)]
python-smartpm: add ignore-recommends package flag
Adds support for a flag that is saved into Smart's configuration against
a package that says it should not be installed if it is only recommended
by a package being installed rather than required. This will enable us
to add BAD_RECOMMENDATIONS support for RPM.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Wed, 24 Jul 2013 10:15:57 +0000 (11:15 +0100)]
python-smartpm: fix sometimes reporting no provider instead of conflict
If a requirement of a package is conflicted, depending on how the
solution is reached, Smart's transaction code may eliminate all
providers of the requirement and then error out because nothing provides
them without saying why. To work around this, store a reason and report
that back if we need to, so for example instead of:
error: Can't install packagegroup-core-ssh-dropbear-1.0-r1@all: no package provides dropbear
we will now get:
error: Can't install packagegroup-core-ssh-dropbear-1.0-r1@all: unable to install provider for dropbear:
error: dropbear-2013.58-r1.0@armv5te is conflicted by openssh-sshd-6.2p2-r0@armv5te
Fixes [YOCTO #4305].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
