Wenzong Fan [Wed, 30 Nov 2011 08:45:43 +0000 (16:45 +0800)]
automake: Extend to provide nativesdk recipe
We will provide autotools nativesdk in meta-tookchain for reconfigure
any autotools supported projects, as a part of the plan we should extend
their recipes first.
Joshua Lock [Tue, 24 Jan 2012 22:10:30 +0000 (14:10 -0800)]
linux-tools: don't build perf when GPLv3 in INCOMPATIBLE_LICENSE
As binutils is required by perf to build and is GPLv3 licensed adding
GPLv3 to INCOMPATIBLE_LICENSE will cause linux-yocto to be skipped.
Long term we should look at moving perf to a separate recipe but as a
short term solution this patch will ensure that when GPLv3 is in
INCOMPATIBLE_LICENSE perf is not built and it's dependencies are not
added to build.
distutils.bbclass: override LDSHARED so we use the linker for this build and not the one used in sstate-cache
Without this fix, when packages are being built using distutils and
the python packages were deployed from sstate-cache is it possible
that the LD command will contain an invalid sysroot override.
We can fix this by always exported LDSHARED, which is the env var
that distutil looks for to override creating shared libraries.
In OpenVZ containers (and probably lx containers as well),
the diskstats entry is not even present. Use the "NoLogicalDrive"
introduced by Elizabeth Flanagan in such case.
This allows the bitbaking to occure within such containers.
Wolfgang Denk [Thu, 22 Dec 2011 09:21:09 +0000 (10:21 +0100)]
clutter-1.6: make build for armv4t
GCC will define __ARM_ARCH_4T__ when building with "-march=armv4t" so
we can check this to turn off the use of 'clz' instructions, which
otherwise would cause compile errors like "selected processor does
not support ARM mode `clz r3,r0'".
Saul Wold [Wed, 23 Nov 2011 23:47:27 +0000 (15:47 -0800)]
intltool: remove XML::Parser check
Add Patch to disable the XML::Parser check in the target
intltool.m4, this check will find the host (not native)
XML::Parser if it's installed possibly causing Host
contamination, but will also fail configuration if XML::Parser
is not installed on the host.
Since we know that XML::Parser is installed on the image, we don't
really need this check, so comment it out.
From RP in mail thread:
> If the recipe needs perl for
> some other reason than intltool, it needs perlnative but it if only
> needs perl for intltool, we shouldn't need the dependency. The .m4 macro
> checks are well intended but don't fit the way we use perl. I really
> don't want to end up in a position where intltool automatically means we
> have to add perlnative as a dependency and we've previously seen many
> problems related to that.
Richard Purdie [Thu, 22 Dec 2011 22:36:06 +0000 (22:36 +0000)]
opkg: Fix installation order in feeds with mutiple providers of packages
If two packages were available of differing priority, this would confuse
opkg and it was ignoring the dependency in the new dependency ordering
code. This changes it not to ignore these cases by setting the badly
named 'quiet' parameter accordingly.
Richard Purdie [Mon, 12 Dec 2011 13:35:15 +0000 (13:35 +0000)]
scripts/runqemu-ifup: Ensure netmask is set correctly
Without this the command will add a route for the subnet 192.168.7.0 which
means multiple qemu instances can't operate correctly since all but the last
one will be masked out.
Richard Purdie [Sun, 18 Dec 2011 23:54:30 +0000 (23:54 +0000)]
opkg: Add logic to detect and creak circular dependencies
This addresses some of the concerns about the previous opkg changes
allowing it to break out of circular dependency loops with just a notice
in the logs rather than effectively going OOM.
Richard Purdie [Thu, 15 Dec 2011 21:08:49 +0000 (21:08 +0000)]
opkg: Update svn 625 -> 633 and fix preinst issues
There is a major issue with opkg images at the moment as preinst
functions are not being executed before their dependencies are installed
and this is leading to corruption of images containing avahi/dbus in
particular.
There are various changes in upstream opkg in the last 8 revisions which
make changes in this area but sadly these aren't enough to get things
working for us. I've updated to the latest svn revision with this patch
since it makes sense to pull in those changes first and then supplement
them with the attached patches.
There is a full description of the patches in the patch headers but in
summary they:
a) Ensure preinst functions execute with their dependencies installed.
This is a pretty invasive change as it changes the package install
ordering in general.
b) Ensure opkg sets $D, not $PKG_ROOT which we don't use
c) Change opkg to allow execution of postinstall functions which fail
resulting in execution on the target device as rootfs_ipk.bbclass
currently does manually.
The remaining changes interface this with the rest of the OE build
infrastructure, adding in the option to tell opkg to run the preinst and
postinst functions, ensure the correct environment is present for the
postinst scripts and removing the now unneeded rootfs_ipk class code
which opkg now does itself.
Richard Purdie [Wed, 16 Nov 2011 16:59:29 +0000 (16:59 +0000)]
package_rpm: Set _tmppath to avoid races over tmp files
Occasionally we keep seeing "unable to open temp file" messages during
do_package_write_rpm tasks. This appears to happen when multiple
processes are writing rpm files and is likely due to using the
shared system temp directory. This patch changes the tmp path
to the package work directory meaning conflicts should become
a non-issue.
Jiajun Xu [Thu, 17 Nov 2011 06:05:50 +0000 (14:05 +0800)]
sanitytest: remove rpm/zypper tests if PACKAGE_CLASSES does not set package_rpm
If PACKAGE_CLASSES does not set package_rpm as the first item, the root filesystem
will not be generated based on rpm. We need remove rpm/zypper tests against
non-rpm filesystem.
Saul Wold [Sat, 10 Dec 2011 20:22:38 +0000 (12:22 -0800)]
texinfo: fix compile failure due target makedoc binary being used
Need to have the texinfo-native build and install a host sysroot makedoc
binary and then patch the target build to use this binary. This requires
that we don't ASSUME_PROVIDED texinfo-native any longer since we need to
install this makedoc tool which is not part of the normal distrubtion.
Paul Eggleton [Wed, 14 Dec 2011 16:35:11 +0000 (16:35 +0000)]
qemu: for native, do not fail if kvm is unavailable
When building qemu-native, if the linux kvm header is unavailable (as
it is on CentOS 5.x 32-bit) then do not pass the --enable-kvm switch to
the configure script, thus avoiding failed do_configure.
Paul Eggleton [Wed, 14 Dec 2011 17:35:14 +0000 (17:35 +0000)]
scripts/bitbake: add a version >= 2.6 check
Unfortunately we now have code in BitBake which is parsed before the
current version check and is incompatible with Python < 2.6. Rather than
fixing this and being eternally vigilant for >= 2.6 feature usage, just
add a version check to the wrapper script.
Paul Eggleton [Wed, 14 Dec 2011 16:37:24 +0000 (16:37 +0000)]
scripts/runqemu: show an error if /dev/net/tun is unusable
If /dev/net/tun is either not present or is not writable by the
user, then show an appropriate error message. (QEMU needs access to this
device in order to enable networking; it may be missing if it is not
enabled or loaded into the kernel, and some distributions such as CentOS
5.x set restrictive permissions upon it.)
Richard Purdie [Thu, 17 Nov 2011 12:28:13 +0000 (12:28 +0000)]
package.bbclass: Ensure we tell rpmdeps where to find its magic file
Without this, if rpmddeps came from a sstate package which was relocated
it might not find its magic file and if that happens, requires/provides
in packages could get corrupted. This leads to failures at rootfs time
during builds with messages like:
libdbus-1.so.3 is needed by libdbus-glib-1-2-0.92-r1.armv5te
since the provides would be missing in the dbus package.
Zhai Edwin [Tue, 22 Nov 2011 06:15:08 +0000 (14:15 +0800)]
matchbox-wm: Fix variable type in _NET_WORKAREA setting
According to XChangeProperty doc, array of "long" should be used when format is
32. Wrong _NET_WORKAREA parameter caused blank screen in matchbox-desktop on 64
bit platform.
Richard Purdie [Thu, 24 Nov 2011 17:46:46 +0000 (17:46 +0000)]
bitbake.conf: We only care about the absolute value of baselib
The value of baselib can be constructed in several different ways
and from a sstate perspective we don't care how it was made up,
we only care what the final value is. This uses the new functionality
in bitbake to ensure we only include the value of baselib and not
any intermediate dependencies.
Richard Purdie [Tue, 29 Nov 2011 12:21:07 +0000 (12:21 +0000)]
eglibc-initial: Ensure symlinks point to the correct location when built from sstate cache
If the sstate files are installed into a sysroot from the sstate cache,
the directory to the main sysroot can change and the symlinks aren't
adjusted to account for this. This is a problem specific to the toolchain
bootstrap process. This patch adds up a function to recreate the
symlinks, hence ensuring they always point at the correct location.
Signed-off-by: Michael Brown <Michael_E_Brown@dell.com>
Port patch from base openembedded. Since 4.6 already has fixes for config.gcc,
the fix only requires a one line change to gcc-cross4.inc.
Richard Purdie [Tue, 15 Nov 2011 20:46:10 +0000 (20:46 +0000)]
libconvert-asn1-perl/libtimedate-perl: Convert to use allarch
Both these recipes generate architecture independent packages.
They can safely use the allarch class to ensure they really
are indepentent from the target compiler and so forth and
hence ensure sstate packages with good dependencies.
Phil Blundell [Mon, 14 Nov 2011 13:06:51 +0000 (13:06 +0000)]
libnss-mdns: avoid race condition in postinst
Writing to "/tmp/nsswitch.conf" leads to a race condition if two
copies of the postinst are running simultaneously. Fix this by
modifying /etc/nsswitch.conf in place using sed -i. Also make the
same change to the prerm for consistency although the race will not
occur here in practice.
Martin Jansa [Mon, 17 Oct 2011 22:06:10 +0000 (00:06 +0200)]
aspell: force ARM mode
* this is just work around for ICE, better fix would be to fix gcc
| ./common/fstream.hpp:23:9: note: the mangling of 'va_list' has changed in GCC 4.4
| modules/speller/default/typo_editdist.cpp: In function 'short int aspeller::typo_edit_distance(acommon::ParmString, acommon::ParmString, const aspeller::TypoEditDistanceInfo&)':
| modules/speller/default/typo_editdist.cpp:77:3: internal compiler error: in gen_thumb_movhi_clobber, at config/arm/arm.md:5937
| Please submit a full bug report,
| with preprocessed source if appropriate.
| See <http://gcc.gnu.org/bugs.html> for instructions.
| make[1]: *** [modules/speller/default/typo_editdist.lo] Error 1
| make[1]: *** Waiting for unfinished jobs....
| make[1]: Leaving directory `/OE/shr-core/tmp-eglibc/work/armv4t-oe-linux-gnueabi/aspell-0.60.6.1-r0/aspell-0.60.6.1'
modules/bluetooth/sbc.c -fPIC -DPIC -o .libs/libbluetooth_sbc_la-sbc.oi
| modules/bluetooth/sbc.c: In function 'sbc_synthesize_four':
| modules/bluetooth/sbc.c:553:18: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c: In function 'sbc_synthesize_eight':
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| {standard input}: Assembler messages:
| {standard input}:6997: Error: selected processor does not support Thumb mode `mla r3,r0,ip,r3'
| {standard input}:7012: Error: selected processor does not support Thumb mode `mla r3,r1,ip,r3'
| {standard input}:7026: Error: selected processor does not support Thumb mode `mla r3,ip,r0,r3'
| {standard input}:7215: Error: selected processor does not support Thumb mode `mla r3,r7,r0,r3'
| {standard input}:7230: Error: selected processor does not support Thumb mode `mla r3,r7,r0,r3'
| {standard input}:7241: Error: selected processor does not support Thumb mode `mla r3,r0,r7,r3'
| {standard input}:7256: Error: selected processor does not support Thumb mode `mla r3,r0,r7,r3'
| {standard input}:7267: Error: selected processor does not support Thumb mode `mla r3,r7,r0,r3'
| {standard input}:7287: Error: selected processor does not support Thumb mode `mla r3,r7,r6,r3'
| {standard input}:7301: Error: selected processor does not support Thumb mode `mla r3,r6,r5,r3'
| {standard input}:7319: Error: selected processor does not support Thumb mode `mla r3,r0,r5,r3'
| {standard input}:7327: Error: selected processor does not support Thumb mode `mla r3,r1,r0,r3'
| {standard input}:7594: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7604: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7614: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7624: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7634: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7647: Error: selected processor does not support Thumb mode `mla r3,r2,r5,r3'
| {standard input}:7657: Error: selected processor does not support Thumb mode `mla r3,r2,r5,r3'
| {standard input}:7815: Error: selected processor does not support Thumb mode `mla r3,r9,r7,r3'
| {standard input}:7837: Error: selected processor does not support Thumb mode `mla r3,r9,r0,r3'
| {standard input}:7853: Error: selected processor does not support Thumb mode `mla r3,r9,r0,r3'
| {standard input}:7875: Error: selected processor does not support Thumb mode `mla r3,r9,r7,r3'
| {standard input}:7891: Error: selected processor does not support Thumb mode `mla r3,r9,r7,r3'
| {standard input}:7908: Error: selected processor does not support Thumb mode `mla r3,r0,r6,r3'
| {standard input}:7931: Error: selected processor does not support Thumb mode `mla r3,r6,r5,r3'
| {standard input}:7952: Error: selected processor does not support Thumb mode `mla r3,r0,r5,r3'
| {standard input}:7960: Error: selected processor does not support Thumb mode `mla r3,r2,r0,r3'
| make[4]: *** [libbluetooth_sbc_la-sbc.lo] Error 1
| make[4]: Leaving directory `/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23/src'
| make[3]: *** [all-recursive] Error 1
| make[3]: Leaving directory `/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23/src'
| make[2]: *** [all] Error 2
| make[2]: Leaving directory `/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23/src'
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory `/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23'
| make: *** [all] Error 2
| + die 'oe_runmake failed'
| + bbfatal 'oe_runmake failed'
| + echo 'ERROR: oe_runmake failed'
| ERROR: oe_runmake failed
| + exit 1
| ERROR: Function 'do_compile' failed (see /OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/temp/log.do_compile.3404 for further information)
Khem Raj [Sun, 23 Oct 2011 14:31:07 +0000 (07:31 -0700)]
pulseaudio: inherit perlnative
manpage generatition uses xmltoman utility
which inturn uses xml-parser. So we add
libxml-parser-perl-native to DEPENDS and also
inherit perlnative so it does not use the one
from build host
Martin Jansa [Tue, 18 Oct 2011 21:03:20 +0000 (23:03 +0200)]
libatomics-ops: force ARM mode
* otherwise ie spitz (armv5te) build fails with:
| make[3]: Entering directory `/OE/shr-core/tmp/work/armv5te-oe-linux-gnueabi/libatomics-ops-1.2-r5/libatomic_ops-1.2/src'
| arm-oe-linux-gnueabi-gcc -march=armv5te -mthumb -mthumb-interwork -mtune=xscale --sysroot=/OE/shr-core/tmp/sysroots/spitz -DHAVE_CONFIG_H -I. -fPIC -O
2 -pipe -g -feliminate-unused-debug-types -DNDEBUG -c atomic_ops.c
| arm-oe-linux-gnueabi-gcc -march=armv5te -mthumb -mthumb-interwork -mtune=xscale --sysroot=/OE/shr-core/tmp/sysroots/spitz -DHAVE_CONFIG_H -I. -fPIC -O
2 -pipe -g -feliminate-unused-debug-types -DNDEBUG -c atomic_ops_stack.c
| arm-oe-linux-gnueabi-gcc -march=armv5te -mthumb -mthumb-interwork -mtune=xscale --sysroot=/OE/shr-core/tmp/sysroots/spitz -DHAVE_CONFIG_H -I. -fPIC -O
2 -pipe -g -feliminate-unused-debug-types -DNDEBUG -c atomic_ops_malloc.c
| atomic_ops_malloc.c: In function 'msb':
| atomic_ops_malloc.c:223:2: warning: right shift count >= width of type [enabled by default]
| rm -f libatomic_ops_gpl.a
| ar cru libatomic_ops_gpl.a atomic_ops_stack.o atomic_ops_malloc.o
| arm-oe-linux-gnueabi-ranlib libatomic_ops_gpl.a
| {standard input}: Assembler messages:
| {standard input}:286: Error: selected processor does not support Thumb mode `swp r1,r2,[r3]'
| {standard input}:329: Error: selected processor does not support Thumb mode `swp r0,r1,[r3]'
* this is just work around, proper fix proposed by Henning Heinold
hm we should think of reworking this recipe now. Because since gcc 4.5
pulseaudio for arm can use the gcc internal atomicstuff and in oe-core
and meta-oe we have 4.5 or 4.6 only. The lib is
only needed for mips and it is still the old release, on cvs
is a much better version, which supports thumb too, if
remember correctly.
Richard Purdie [Mon, 14 Nov 2011 17:43:45 +0000 (17:43 +0000)]
dpkg/update-alternatives: Fix dpkg version of update-alternatives to be usable
The version of dpkg the updates-alternatives-dpkg recipe pointed
at no longer used a perl script but a compiled binary. This meant
the "all" architecture field was invalid, as as the sed operation
during do_patch. All things considered the separate recipe was
pretty pointless.
This patch moves update-alternatives back to being built as part
of the dpkg recipe. It also moves various functionalty to the .inc
file which it belongs and fixes building and packaging of the dpkg
perl modules.
Richard Purdie [Mon, 14 Nov 2011 12:45:57 +0000 (12:45 +0000)]
base-passwd: Fix the broken preinst/postinstall
The preinst accesses file which may not yet have been unpacked.
The postinst is too late for the creation of these files
for at least the opkg backend.
This patch therefore encodes the file contents into the preinst,
resolving the various issues once and for all.
Richard Purdie [Fri, 11 Nov 2011 17:17:01 +0000 (17:17 +0000)]
opkg: Ensure we use the uname/gname fields when extracting tarballs
When extracting packages onto the target system in particular, we
really want to ensure the name fields in the tarball are used over
and above the numerical uid/gid values. This patch adds this
functionality to opkg and ensures package upgrades work correctly
permission wise.
Richard Purdie [Sat, 12 Nov 2011 08:36:55 +0000 (08:36 +0000)]
rootfs_ipk.bbclass: Ensure bad recommendations persist in the status file
Currently bad recommendations are added to the status file with status
"ok". After a single opkg command, whilst it will ignore the recommendation,
the status changes to "installed" even if the recommended package was not
installed. Whilst this is likely a glitch in opkg's logic, the correct
way to persist the information in the status file is to set the status
to "hold" as deinstall packages with that status remain. With this change
the bad recommendations persist accross multiple opkg runs and the system
behaves as expected.
Paul Eggleton [Fri, 21 Oct 2011 13:49:39 +0000 (14:49 +0100)]
util-linux: split out mkfs into its own package
For those external tools such as Webmin that call mkfs to do formatting
operations, it is useful to have it in its own package to avoid dragging
in the rest of util-linux.
Mark Hatle [Wed, 9 Nov 2011 23:02:43 +0000 (17:02 -0600)]
shadow: Generate the shadow files at rootfs construction
With the recent changes to the shadow-native package support "--root",
we can now convert the passwd/group files to their shadow forms while
doing the rootfs install, instead of waiting to run on the target.
Mark Hatle [Thu, 10 Nov 2011 17:43:02 +0000 (11:43 -0600)]
rootfs_rpm.bbclass: Turn off script debugging
Disable script debugging, as the log files become huge and take a
long time to process during the log check step. This results in a
performance improvement.
Mark Hatle [Thu, 10 Nov 2011 16:30:21 +0000 (10:30 -0600)]
rootfs_rpm.bbclass: Enable pre and post install scripts
[YOCTO #1755]
We change the want the RPM rootfs install works to install pre and post install
scripts. The new method uses a script helper that is invoked by RPM outside
of the normal chroot.
The wrapper is dynamically generated prior to the install starting. It will
check the return code of the script. If the script fails, it will store a copy
to be executed on the first system boot. This is similar to the previous
mechanism.
In addition, a line of debug was added to the scripts as written by package_rpm
to list which package and which script for later debugging, if necessary.
Darren Hart [Tue, 8 Nov 2011 18:21:28 +0000 (10:21 -0800)]
ncurses: refactor configure to avoid configuring widec when disabled
The ENABLE_WIDEC variable can be used to disable ncurses wide character support
when your C library doesn't support it. Currently, the do_configure step
configures for both narrow and wide characters regardless and only checks
ENABLE_WIDEC during compilation. This leads to QA failures with host
contamination during configure if the C library doesn't support wide characters.
Refactor do_configure with a new ncurses_configure helper function and only
configure for wide character support if ENABLE_WIDEC is true.
Ensure that configure errors are propogated back through to do_configure.
Tested with ENABLE_WIDEC as true and false via an ncurses bbappend on i586,
including basic error injection.
Saul Wold [Tue, 8 Nov 2011 20:29:24 +0000 (12:29 -0800)]
udev-extraconf: blacklist /dev/md
Do not mount /dev/md by default via udev, this resolved a problem
with the sanity test failing due to seeing the error while attempting
to mount /dev/md0
Scott Garman [Wed, 9 Nov 2011 02:23:48 +0000 (18:23 -0800)]
useradd.bbclass: only modify packages in USERADD_PACKAGES
Previously we injected the user/group preinstall script into all
output packages. This fixes that so that only packages listed in
USERADD_PACKAGES get modified.
It also removes the USERADDPN variable, which is no longer needed.
Paul Eggleton [Wed, 9 Nov 2011 11:33:41 +0000 (11:33 +0000)]
busybox: add grep to temporary links during uninstall
In the busybox package prerm we set up some temporary links and modify
PATH so that certain utilities are provided for the purpose of running
update-alternatives; if grep is not among these then you get errors when
removing busybox, so add a temporary link for grep as well.
Paul Eggleton [Wed, 9 Nov 2011 11:12:08 +0000 (11:12 +0000)]
classes/package_rpm: disable uninstall scripts for upgrades
Our current assumption (based on the behaviour of opkg) when writing
recipes is that prerm and postrm do not get called during an upgrade.
When using rpm however, these are mapped to the rpm "preun" and "postun"
events which occur after postinst for upgrades, and when these contain
removal type operations (such as update-alternatives --remove) this
causes problems.
This patch wraps each preun and postun script for rpm in a check that
determines whether or not the script is being called during an upgrade,
and skips the entire script if it is, which mimics the behaviour of opkg
under the same conditions.
Tom Zanussi [Sat, 5 Nov 2011 01:25:03 +0000 (20:25 -0500)]
python: skip setup.py 'import check' when cross-compiling
build_extension() in setup.py, as part of the build process, does an
'import check' on the built extension. The import check in turn
dlopen()'s the shared library associated with the extension, which
isn't something that makes sense if that library was cross-compiled
for a different architecture.
This was noticed with an x86_64 target that was compiled with avx
support, because it caused 'illegal instruction' exceptions:
For other target architectures, it doesn't necessarily cause illegal
instruction exceptions, but still fails. For example, on arm, the
failure pathway causes this warning:
*** WARNING: renaming "cmath" since importing it failed: .../cmath.so:
wrong ELF class: ELFCLASS32
This patch to setup.py and the associated recipe changes allow the
whole 'import check' logic to be skipped when cross-compiling.
Tom Zanussi [Wed, 2 Nov 2011 03:47:53 +0000 (22:47 -0500)]
libzypp: fix mishandling of hyphenated arches
Several hyphen-to-underscore translations were missing, causing
compiler errors trying to build arches with hyphens in their names.
This adds the missing translations.
