Paul Eggleton [Wed, 30 Apr 2014 12:56:33 +0000 (13:56 +0100)]
sqlite3: restore upstream version numbering
Regardless of the numbering used in source archive filenames, the
upstream version number is in dotted form in documentation, release
notes and the website, so we need to be using that here since that is
what people will expect to see.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the following patch(es):
* sysroot-arg.patch (changes included in release)
Correct the fccache.c license checksum and the line numbers because the
license snippet has moved and, also, at the previous upgrade the lines
were wrong (shifted a couple of lines).
Richard Purdie [Sun, 27 Apr 2014 00:22:10 +0000 (01:22 +0100)]
gcc: Drop ARCH_FLAGS_FOR_TARGET usage
As far as I can tell this variable is now completely unneeded. It would
only ever get used in target builds and these are now correctly done
in the target environment namespace, not any of our cross environments.
As such, CC and other variables contain the correct compilers and other
tune options and these are correctly picked up when building libgcc,
libstdc++ and others.
I tried to figure out where else these would make any sense and couldn't
find anything. Builds appear fine without them so lets drop the complexity
including the patch adding in this flag to gcc.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 27 Apr 2014 00:24:31 +0000 (01:24 +0100)]
gcc-common/gcc-configure-common: Move gnu-configize to its own shared task
This command modifies ${S} and can race against other tasks running do_configure and
having the scripts disappear from under them. To avoid this move to its own
task and work on the shared work directory as a common task.
It needs to be a python task to avoid lots of shell exported variables as
dependencies.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 27 Apr 2014 00:23:46 +0000 (01:23 +0100)]
gcc-target: Limit compile to host targets, don't build runtimes.
Currently the gcc builds are building copies of the target libraries
that we never use (it isn't installed in do_install). This is a rather
pointless waste of cpu time.
Instead just compile the host targets. Comparing the package output of
this compared to a previous build shows that the unwind.h header is
missing since its provided by gcc. Fix this simply by copying it in.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Irina Patru [Mon, 28 Apr 2014 11:08:46 +0000 (14:08 +0300)]
distrodata.bbclass: Fix checkpkg functionality
Currently it wasn't working because *COMMAND variables were removed
from fetcher.
Now checkpkg sets the command internally and sends it as a parameter
to _runwget() function from wget fetch.
Signed-off-by: Irina Patru <irina.patru@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Update ltp version to 20140422
Removed two patches that already exist in the current version:
1. regen-makefile.patch
2. ffsb-remove-hardcoded-configure.patch
Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Stefan Stanacar [Fri, 25 Apr 2014 11:35:27 +0000 (14:35 +0300)]
oeqa/utils: sshcontrol: realtime logging of output
Log the output of the command as it runs not when it finished, else
tail -f tmp/work/minnow-poky-linux/core-image-sato/1.0-r0/testimage/ssh_target_log
isn't as useful as it could be.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Martin Jansa [Fri, 25 Apr 2014 16:40:27 +0000 (18:40 +0200)]
feature-arm-thumb.inc, arch-armv4.inc: Add "arm" to TUNE_FEATURES
* it will be inherited by most DEFAULTTUNEs, except few exceptions which
support only thumb and not arm
* respect missing "arm" in TUNE_FEATURES in feature-arm-thumb.inc, so
when recipe asks for "arm" and MACHINE supports only "thumb" ignore
recipe and try to build with "thumb"
* show warning when overriding ARM_INSTRUCTION_SET set by recipe from tune
config
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Chong Lu [Tue, 8 Apr 2014 03:30:56 +0000 (11:30 +0800)]
dbus: fix a hard dependency about dbus-ptest
If image contains dbus and ptest is in DISTRO_FEATURES, dbus-ptest package
is installed, regardless of whether ptest-pkgs is in IMAGE_FEATURES. This
issue will increase size for most small images.
This patch fixes this problem.
[YOCTO #5702]
Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
udev-extraconf: update mount.sh to use /run/media instead of /media
This is done to work around the issue of auto-mounting block devices
(i.e. SD cards) when root filesystem is still in read-only mode and
creating /media/<device> mount-points by udev is not possible. That
is due to udev (/etc/rcS.d/S03udev) getting started earlier than
checkroot (/etc/rcS.d/S10checkroot.sh) gets a chance to re-mount the
rootfs as read-write.
Although, canonical FHS specifies /media/<device> as a mount point
for removable media devices, the latest 2.3 version was released in
2004 and since then FreeDesktop/udisks and other tools adopted the
new /run/media/<user>/<device> location. That was done to overcome
read-only rootfs limitation, since /run is usually a tmpfs mounted
partition, plus avoid name-clash between users.
For our embedded systems environment we assume single-user operation
and hence simplify mount point to just /run/media/<device>. But for
proper per-user mounting to /run/media/<user>/<device>, some sort of
session management is required along with the tool like udisks, that
is out of scope of this simple udev-based auto-mounting.
This device list is only used if USE_DEVFS is set to '0' (which is NOT the default since 2013-12-14,
see commit f54fdd6673a136ee1cee1f3263a8a7820de43ca3) and if IMAGE_DEVICE_TABLE and IMAGE_DEVICE_TABLES are not set.
This is, of course a very subjective list but minimal with 62 (special) files.
However, you should be able to boot correctly a lot of embedded linux around.
Changes:
- add sda, sdb, sda[1234], sdb[1234]
- add mmcblk0, mmcblk0p[1234]
- add rtc0, rtc1
- restrict maximum hdaX from 19 to 4 (pata is old)
- add ttyS1
- remove initctl, apm_bios, tty8, ttySA
- sorted entries
Ming Liu [Tue, 1 Apr 2014 02:57:15 +0000 (02:57 +0000)]
kernel: don't populate source symbolic link
/usr/src/kernel/source deployed by kernel-dev package is symbolically
linking to a build-time kernel source folder, which make no sense when
cross-compiling.
Fixed by not populating it at install stage.
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Thu, 27 Mar 2014 02:34:41 +0000 (02:34 +0000)]
bind: add support for read-only rootfs
This patch adds support for read-only rootfs to the bind service.
Basically it just bind mounts several directories so that the bind
service could start correctly without reporting any error.
Richard Purdie [Thu, 24 Apr 2014 14:24:09 +0000 (15:24 +0100)]
gcc-cross-initial: Separate out libgcc-initial
Its useful to separate out the native (cross) binaries from the target
compilation. We already do this for libgcc, this now takes the same
approach for -initial.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 24 Apr 2014 09:19:42 +0000 (10:19 +0100)]
gcc-cross: Improve handling of unwind.h
Rather than building the whole of libgcc to obtain the unwind.h header
file, simply configure it and then install the file. This avoids copying
chunks of data around when we don't need to and building the same thing
twice.
After doing this we need to make sure the target build directory exists
in the libgcc case since it will no longer be created automatically.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 24 Apr 2014 09:17:18 +0000 (10:17 +0100)]
utils: Add hardlinkdir shell function
In a number of places it would be helpful to be able to copy trees of
files using hardlinks. This turns out to be harder than you'd expect
since there is no good single command that does this well and handles
all file types correctly.
Abstracting this into a function therefore makes sense, cpio seems
as good an option as any other.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mike Crowe [Wed, 16 Apr 2014 09:31:36 +0000 (10:31 +0100)]
native.bbclass: Override TARGET_ flags too
TARGET_LDFLAGS is currently defined in bitbake.conf to contain
${TARGET_LINK_HASH_STYLE} which differs between MIPS and other
targets. Since TARGET_LDFLAGS is an exported variable it affects the hash
of every shell task even if it is not used.
We don't want native recipe tasks to have different hashes purely because
they happen to have been built in order to satisfy dependencies for
different MACHINEs since this causes lots of churn in the native sysroot
when switching between MACHINEs.
Making native.bbclass override TARGET_LDFLAGS to use BUILD_LDFLAGS ensures
consistent hashes and is a sensible thing to be doing anyway.
Although they don't appear to have the same detrimental affect on task
hashes TARGET_CPPFLAGS, TARGET_CFLAGS and TARGET_CXXFLAGS should be
overridden too.
Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adrian Calianu [Tue, 22 Apr 2014 08:04:14 +0000 (10:04 +0200)]
oprofileui-server_git: add avahi-daemon to RDEPENDS list
oprofileui-server recipe depends on avahi recipe. But avahi recipe
generates more packages and one of those packages(avahi-daemon) which
oprofileui-server expected to be available is not found into image.
A runtime dependency of oprofileui-server on avahi-daemon is required.
Upstream-Status: Pending
Signed-off-by: Adrian Calianu <adrian.calianu@enea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Maxin B. John [Wed, 23 Apr 2014 12:41:39 +0000 (14:41 +0200)]
libpng: bump to 1.6.10
1. Fixes CVE-2014-0333
2. There are changes in License checksums. This is due to new
contributor names being added to LICENSE and png.h file
contains version of the new release.So, license remains the same.
Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joe Slater [Tue, 22 Apr 2014 18:00:41 +0000 (11:00 -0700)]
pixbufcache: add error exit in pixbufcache_sstate_postinst
In order to attempt recovery of a failed populate_sysroot_setscene,
we need to explicitly error exit an SSTATEPOSTINSTFUNC. So, we test
the return value of gdk-pixbuf-query-loaders.
Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
