Ed Bartosh [Fri, 23 Sep 2016 12:10:26 +0000 (15:10 +0300)]
wic: remove partition images
Preserving images for every partition doubles disk space
consumed by an image build. As those images are not used,
so it's better to remove them after assembling final image.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patrick Ohly [Fri, 23 Sep 2016 13:23:20 +0000 (15:23 +0200)]
openssl.inc: avoid random ptest failures
"make alltests" is sensitive to the timestamps of the installed
files. Depending on the order in which cp copies files, .o and/or
executables may end up with time stamps older than the source files.
Running tests then triggers recompilation attempts, which typically
will fail because dev tools and files are not installed.
"cp -a" is not enough because the files also have to be newer than
the installed header files. Setting the file time stamps to
the current time explicitly after copying solves the problem because
do_install_ptest_base is guaranteed to run after do_install.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patrick Ohly [Fri, 23 Sep 2016 13:26:05 +0000 (15:26 +0200)]
openssl: update to 1.0.2i (CVE-2016-6304 and more)
This update fixes several CVEs:
* OCSP Status Request extension unbounded memory growth (CVE-2016-6304)
* SWEET32 Mitigation (CVE-2016-2183)
* OOB write in MDC2_Update() (CVE-2016-6303)
* Malformed SHA512 ticket DoS (CVE-2016-6302)
* OOB write in BN_bn2dec() (CVE-2016-2182)
* OOB read in TS_OBJ_print_bio() (CVE-2016-2180)
* DTLS buffered message DoS (CVE-2016-2179)
* DTLS replay protection DoS (CVE-2016-2181)
* Certificate message OOB reads (CVE-2016-6306)
Of these, only CVE-2016-6304 is considered of high
severity. Everything else is low. CVE-2016-2177 and CVE-2016-2178 were
already fixed via local patches, which can be removed now.
See https://www.openssl.org/news/secadv/20160922.txt for details.
Some patches had to be refreshed and one compile error fix from
upstream's OpenSSL_1_0_2-stable was required. The server.pem
file is needed for test_dtls.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Fri, 23 Sep 2016 09:22:11 +0000 (21:22 +1200)]
lib/oe/patch: improve accuracy of patch header extraction
When PATCHTOOL = "git", if we need to manually apply a patch and then
commit it (i.e. when git am doesn't work) we try to extract the author /
date / shortlog from the patch header. Make the following improvements
to that extraction process:
* If there's no explicit Subject: but the first line is followed by a
blank line, isn't an Upstream-Status: or Index: marker and isn't too
long, then assume it's good enough to be the shortlog. This avoids
having too many patches with "Upgrade to version x.y" as the shortlog
(since that is often when patches get added).
* Add --follow to the command we use to find the commit that added the
patch, so we mostly get the commit that added the patch rather than
getting stuck on upgrade commits that last moved/renamed the patch
* Populate the date from the commit that added the patch if we were able
to get the author but not the date from the patch (otherwise you get
today's date which is less useful).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Fri, 23 Sep 2016 09:22:10 +0000 (21:22 +1200)]
lib/oe/patch: exclude "From <hash>" from commit message when PATCHTOOL is "git"
If you leave "From <hash>" lines in the commit message it can actually
break git rebase because it tries to interpret the line in the context
of the current repository, and if the hash is invalid then a rebase
will blow up with:
fatal: git cat-file: could not get object info
or in newer git versions:
error: unable to find <hash>
fatal: git cat-file <hash>: bad file
(I hit this when I tried to do a devtool upgrade on openssl to 1.0.2i
the first time I did "git rebase --skip")
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Fri, 23 Sep 2016 09:17:52 +0000 (21:17 +1200)]
nativesdk-qemu-helper: drop old Zaurus flash tools
These tools are relics of an earlier time when the Zaurus devices were
reference platforms - these days they are no longer needed. It seems
amazing that they survived earlier purges.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Thu, 21 Jul 2016 03:35:53 +0000 (20:35 -0700)]
systemd: install udev.pc
It provides udev, but doesn't install udev.pc, which causes other
recipes failed to figure out udevdir.
Fixed when systemd in DISTRO_FEATURES:
$ bitbake pcmciautils (or btrfs-tools):
Package udev was not found in the pkg-config search path.
Perhaps you should add the directory containing `udev.pc'
to the PKG_CONFIG_PATH environment variable
No package 'udev' found
Their udev rules file may not be installed according to each pkg's
implementation.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
We still have problems where deploying SDKMACHINE=i686 can cause removal
of SDKMACHINE=x86_64 artefacts.
The reason is that x86_64 is a BUILD_ARCH as well as an SDK_ARCH and
the manifest namespaces overlap. To fix this, set PACKAGE_ARCH and
the stamp-extra-into to include SDK_OS. SDK_OS may not be entirely correct
but it is what sstate.bbclass uses for nativesdk and fixing that is
a separate issue.
This is confirmed to resolve artefact problems on the AB which have been
delaying a new uninative release.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jose Lamego [Wed, 21 Sep 2016 19:54:59 +0000 (12:54 -0700)]
oeqa/selftest/base: backup and restore local configuration files
Selftests' cleanup method during test setup is not capable of
restoring local configuration files that remain modified after
aborting a test through a keyboard interruption.
This change creates backups for local.conf and bblayers.conf at
test setup, restore them when found, and deletes them at cleanup.
[YOCTO #9390]
Signed-off-by: Jose Lamego <jose.a.lamego@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
The feature to install packages in the target requires to
build the package manager. It would fail, with very obtuse
errors, if a test requires to install something and the
package manager hasn't been build. This will add the package
manager as dependency for testimage.
[YOCTO #10260]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
scripts/runqemu: Using a cpio* rootfs has no special network
When booting a system with the rootfs being of cpio* type the networking
setup should still work the same as for all other root filesystem types.
This change removes the clearing of the NETWORK_CMD variable allowing
for the slirp/tap setup to be provided to QEMU.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Not all QEMU machines (outside of those available in OE-Core) are
capable of using the virtio-rng-pci device due to various machine models
not having a pci/virtio bus. This makes it such that the use of the
'-device virtio-rng-pci' flag to QEMU is machine specific.
This patch removes the general addition of the flag to all runqemu
targets and adds the flag into the QB_OPT_APPEND for all the qemu*
machines in OE-Core that support its use (which is all of them).
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Zhixiong Chi [Thu, 22 Sep 2016 07:54:27 +0000 (15:54 +0800)]
wpa_supplicant: Security Advisory-CVE-2016-4477
Add CVE-2016-4477 patch for avoiding \n and \r characters in passphrase
parameters, which allows remote attackers to cause a denial of service
(daemon outage) via a crafted WPS operation.
Patches came from http://w1.fi/security/2016-1/
Signed-off-by: Zhixiong Chi <zhixiong.chi@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Zhixiong Chi [Thu, 22 Sep 2016 07:54:20 +0000 (15:54 +0800)]
wpa_supplicant: Security Advisory-CVE-2016-4476
Add CVE-2016-4476 patch for avoiding \n and \r characters in passphrase
parameters, which allows remote attackers to cause a denial of service
(daemon outage) via a crafted WPS operation.
Patches came from http://w1.fi/security/2016-1/
Signed-off-by: Zhixiong Chi <zhixiong.chi@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Currently adding a font recipe to an image doesn't have enough
dependencies to cause mkfontdir-native to be included in the native
sysroot. This creates problems with the postinstall scripts for fonts
which call mkfontdir to create font index files: font.dir. The end
result is missing font.dir files in the built image and a malfunctioning
font system.
Dependencies for the relevant recipes currently look like this:
Where:
* D = DEPENDS
* R = RDEPENDS
* RN = RDEPENDS_class-native
* <font.bb> e.g. font-adobe-100dpi*.bb
Some details where omitted for clarity e.g. dependencies on util-macros.
I believe the intent behind the RDEPENDS_class-native chain:
* <font.bb> -> font-util-native -> mkfontdir-native
was to provide the necessary dependency on mkfontdir. However because
the native sysroot is not built from packages this RDEPENDS_class-native
chain doesn't have the desire effect (i.e. it doesn't pull in
mkfontdir-native).
Changing the RDEPENDS_class-native chain into a DEPENDS_class-native
chain is a non-starter because of the build time dependency loop it
creates:
* font-util-native -> mkfontscale-native -> libfontenc-native -> font-util-native
Having upstream remove the build time dependency of libfontenc on
font-util is also a non-starter[1] even though it does create problems
in other distributions, for example on Debian see [2], [3].
Instead add a DEPENDS on mkfontdir-native in the encodings recipe in
addition to the mkfontscale-native dependency it already contains. This
solves the missing mkfontdir in the native sysroot problem without
introducing a build dependency loop.
buildtools-tarball shouldn't be regenerated when MACHINE changes,
nor should variants for other SDKMACHINE be removed from the deploy
directory when SDKMACHINE changes.
Remove target architecture dependencies so that deploy artefacts
can overlap.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
toolchain-scripts-base: add base class for toolchain_create_sdk_version
We use toolchain_create_sdk_version() in buildtools-tarball but
don't want the extra classes toolchain-scripts pulls in, therefore
split out a separate base class for this function which both
toolchain-scripts and the buildtools-tarball can inherit.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 21 Sep 2016 21:30:03 +0000 (22:30 +0100)]
base.bbclass: Drop unnecessary dirs setting
${D} is listed in cleandirs so no need to list it in dirs as well.
The default directory is ${B} so this is a cleanup which should have
no changes to the execution.
[YOCTO #10017]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 21 Sep 2016 10:53:57 +0000 (11:53 +0100)]
autotools/siteinfo: Tweak CONFIG_SITE handling for determism/races
As things stand there are multiple races in the CONFIG_SITE handling
where checksums can change depending on whether site directories
exist or not when parsing happens. This is bad.
Secondly, there is a build race that occurs if you build virtuals
in parallel with the "main" recipe, since the main recipe is parsed
when the virtual is (since it sets variables like BBCLASSEXTEND)
and with the current code, it may look for files and directories
which could be created/destroyed which the loop is executing. This
is also bad.
The aclocal-copy directory should only ever be accessed by the call
from autotools.bbclass. This changes the parameter name to make it
clear and ensures all callers have the right usage, neatly avoiding
all the problems above. Also added better comments.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Tue, 20 Sep 2016 10:32:57 +0000 (03:32 -0700)]
asciidoc: set CLEANBROKEN to fix rebuild
The make clean removes doc/a2x.1 and doc/asciidoc.1, then it would cause
build failures since in the second build:
Fixing CONF_DIR in asciidoc.py
Fixing CONF_DIR in a2x.py
python a2x.py -f manpage doc/a2x.1.txt
a2x: ERROR: "xmllint" --nonet --noout --valid "/path/to/asciidoc-native/8.6.9-r0/asciidoc-8.6.9/doc/a2x.1.xml" returned non-zero exit status 4
make: *** [doc/a2x.1] Error 1
The xmllint failed because "--nonext" is used:
I/O error : Attempt to load network entity http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd
/buildarea/lyang1/test_arm/tmp/work/x86_64-linux/asciidoc-native/8.6.9-r0/asciidoc-8.6.9/doc/a2x.1.xml:2: warning: failed to load external entity "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd"
Avoid running make clean will fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
When built on an i686 host for qemux86-64 without the
fix to obey LD and it fails:
/scratch/dogwood/toolchains/x86_64/bin/i686-pc-linux-gnu-ld:
Relocatable linking with relocations from format elf64-x86-64
(/scratch/dogwood/perf-ld-test/build/tmp/work/qemux86_64-mel-linux/perf/1.0-r9/perf-1.0/fs/fs.o)
to format elf32-i386 (/scratch/dogwood/perf-ld-test/build/tmp/work/qemux86_64-mel-linux/perf/1.0-r9/perf-1.0/fs/libapi-in.o)
is not supported
This is because LD includes HOST_LD_ARCH, which contains TUNE_LDARGS,
which is -m elf32_x86_64 for x86_64. Without that, direct use of ld will fail.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Sujith Haridasan <Sujith_Haridasan@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Andreas Müller [Wed, 21 Sep 2016 05:30:43 +0000 (07:30 +0200)]
libunwind: fix build by linking with bfd instead of gold
works around:
<native-sysroot>/ld: error: Gperf-simple.o: cannot make copy relocation for protected symbol '_Uarm_local_addr_space', defined in ../src/.libs/libunwind-arm.so
collect2: error: ld returned 1 exit status
Makefile:1038: recipe for target 'Gperf-simple' failed
make[1]: *** [Gperf-simple] Error 1
make[1]: *** Waiting for unfinished jobs....
<...>
<native-sysroot>/ld: error: Lperf-simple.o: cannot make copy relocation for protected symbol '_ULarm_local_addr_space', defined in ../src/.libs/libunwind.so
collect2: error: ld returned 1 exit status
Makefile:1094: recipe for target 'Lperf-simple' failed
make[1]: *** [Lperf-simple] Error 1
<...>
ERROR: oe_runmake failed
<native-sysroot>/ld: error: Gperf-trace.o: cannot make copy relocation for protected symbol '_Uarm_local_addr_space', defined in ../src/.libs/libunwind-arm.so
collect2: error: ld returned 1 exit status
Makefile:1042: recipe for target 'Gperf-trace' failed
make[1]: *** [Gperf-trace] Error 1
<native-sysroot>/ld: error: Lperf-trace.o: cannot make copy relocation for protected symbol '_ULarm_local_addr_space', defined in ../src/.libs/libunwind.so
collect2: error: ld returned 1 exit status
Makefile:1098: recipe for target 'Lperf-trace' failed
make[1]: *** [Lperf-trace] Error 1
<...>
<native-sysroot>/ld: error: test-coredump-unwind.o: cannot make copy relocation for protected symbol '_UCD_accessors', defined in ../src/.libs/libunwind-coredump.so
collect2: error: ld returned 1 exit status
Makefile:1186: recipe for target 'test-coredump-unwind' failed
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Tried by adding CFLAGS_append = " -fpic " to
the recipe. But that couldn't help resolve the
warning message:
x264/r2491+gitAUTOINC+c8a773ebfc-r0/packages-split/x264/usr/lib/libx264.so.144' has relocations in .text [textrel]
It was found that this warning is emitted because of the
assembly files in the source code. And it is not easy to
get rid of TEXTREL's which are coming from the assembly
source files.
Adding textrel to INSANE_SKIP resolves this issue.
This issue was observed in cyclone5 and imx6qsabresd BSP's.
So generalizing the patch.
The relocation script of the SDK doesn't have enough
error handling when replacing host perl with SDK perl
or changing the symlinks. This will add those checks
along with a sanity check of xargs.
[YOCTO #10114]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Andreas Müller [Wed, 21 Sep 2016 20:46:38 +0000 (22:46 +0200)]
libnewt: link whiptail properly with libnewt
Configuration failed to detect gold as GNU linker. It was searching for
'GNU ld' but gold returns 'GNU gold (GNU Binutils 2.27.0.20160806) 1.12' which
does not match. When not linking by GNU linker Makefile did some magic link
target alignment:
| WARNING: libnewt-0.52.19-r0 do_package_qa: QA Issue: /usr/bin/whiptail contained in package whiptail requires libnewt.so, but no providers found in RDEPENDS_whiptail? [file-rdeps]
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Wed, 21 Sep 2016 23:24:03 +0000 (00:24 +0100)]
uninative-tarball: Make stamp independent
The uninative tarball only contains nativesdk compoents. It should
not get regenerated when MACHINE changes for example. Currently its
sstate arch is also incorrect so changing SDKMACHINE results in other
variants being removed from the deploy directory.
This patch removes the target architecture dependencies so that
deploy artefacts can overlap and it doesn't continually rebuild. This
also fixes various autobuilder/release artefact issues we're having
as a result of these issues.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If DEPLOY_DIR_IMAGE doesn't exist during check_arg_machine() we
will attempt to guess a suitable value later when check_and_set()
calls validate_paths(), therefore this shouldn't raise an exception
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu: don't try and invoke bitbake when running in a toolchain env
If a MACHINE value is passed we can't validate it by running bitbake
as the toolchain environment doesn't include the build system, we
must assume that the passed value for MACHINE is correct.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu: try and guess qemu-system binary when MACHINE isn't set
Emulate some logic from the prior, shell based, version of runqemu
to try and infer the correct setting for MACHINE from the kernel
and rootfs filenames.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu: validate paths and attempt to infer unset paths
We need to validate and ensure all paths are set regardless of
whether runqemu was invoked with a .qemuboot.conf file or
otherwise. Split this logic out into a separate method called
during check_and_set()
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 20 Sep 2016 15:16:38 +0000 (11:16 -0400)]
linux-yocto/4.8: introduce preempt-rt
Paul Gortmaker has made the preempt-rt patch available for the
4.8 kernel.
This commit merges his queue to standard/preempt-rt/rebase, which
will be kept up to date with a clean history, and it also makes
it available in standard/preempt-rt/base, which will be kept fast
forward for board support.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 20 Sep 2016 15:16:36 +0000 (11:16 -0400)]
linux-yocto/4.1: 4.1.32 content and configuration warning fixes
The LINUX_VERSION was previously updated to 4.1.32, but the
SRCREVs for the actual content were missed. This gets our actual
version and the PV back in sync.
We also update the meta data to fix configuration audit warnings
from the beaglebone builds.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
squash with 4.1
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kernel.bbclass: Add kernel_version_sanity_check function
The kernel being built should match what the recipe claims it is
building. This function ensures that happens by comparing the version
information in the kernel's Makefile to the PV the recipe is using.
v2 changes:
* Match against PV instead of LINUX_VERSION
* Match against EXTRAVERSION as well (e.g., -rc4)
* Cleaned up version string building
Fixes [YOCTO #6767].
Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
populate_sdk_base: fix support for changing SDKMACHINE settings
Include SDKMACHINE in the tasks stamp information and the name of
the sstate-inputdirs so that changing SDKMACHINE doesn't result in
valid output of the task being deleted when SDKMACHINE is changed.
Without this patch changing SDKMACHINE and building an SDK resulted
in toolchain installers for other SDKMACHINE's being deleted from
the deploy directoy.
[YOCTO #10275]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Tue, 20 Sep 2016 05:34:36 +0000 (22:34 -0700)]
openssl: fix do_configure error when cwd is not in @INC
Fixed when building on Debian-testing:
| Can't locate find.pl in @INC (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.22.2 /usr/local/share/perl/5.22.2 /usr/lib/x86_64-linux-gnu/perl5/5.22 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.22 /usr/share/perl/5.22 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base) at perlpath.pl line 7.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
This adds the correct support for initfini-array which replaces .init
and .fini with .init-array and .fini-array. There is no appreciable
size difference with this change.
The change is needed since configure will not correctly detect support
when building cross-compilers.
oeqa/runtime/parselogs.py: Add ignore of tsc calibration fail in x86
We are experimenting failures to calibrate CPU's using TSC in x86
VM's due to usage of nested KVM [1], this is a known issue [2][3]
in virtualization environments, for detail explnation see [4].
Also we already have an ignore for 'TSC Fast calibration fail'.
Martin Jansa [Mon, 19 Sep 2016 14:17:31 +0000 (16:17 +0200)]
enchant: add PACKAGECONFIG for *spell
* use PACKAGECONFIG for various *spell implementations
* keep aspell enabled by default
* prevent hunspell/myspell being autodetected as reported in "bitbake world status" e-mails:
WARN: enchant: enchant rdepends on hunspell, but it isn't a build dependency?
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Package the carl9170 binary firmware separately because it is needed
by various usb dongles and installing whole linux-firmware is overkill.
carl9170 is an atheros-based firmware, the succesor of ar9170 which is
deprecated and its driver (ar9170) was removed from the kernel tree.
carl9170 comes both as a binary blob and also with free sources; the
sources are deleted in linux-firmware.bb to avoid depeding on bash/etc.
Also we should keep ar9170 as is because OOT drivers might still use it.
The license for carl9170 is GPLv2 (sources are beside the bin in the
linux-firmware git repo).
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
default-distrovars.inc: remove libidn from LGPLv2_WHITELIST_GPL-3.0
The libidn recipe is now buildable in distros which blacklist
GPL-3.0 without needing to be explicitly whitelisted (since it
provides at least one non GPLv3 package).
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Yuanjie Huang [Fri, 26 Aug 2016 01:57:33 +0000 (09:57 +0800)]
openssh: fix potential signed overflow to enable compilation with -ftrapv
Pointer arithmatic results in implementation defined signed integer
type, so that 's - src' in strlcpy and others may trigger signed overflow.
In case of compilation by gcc or clang with -ftrapv option, the overflow
would lead to program abort.
Ed Bartosh [Fri, 16 Sep 2016 14:32:53 +0000 (17:32 +0300)]
image_types: add parted-native to do_image_wic depends
As parted is always used by wic it makes sense to make do_image_wic
dependent on parted-native:do_populate_sysroot. This should help
to avoid adding it to all wic image recipes.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Mark Hatle [Thu, 15 Sep 2016 22:47:38 +0000 (17:47 -0500)]
package_manager.py: Adjust error message order
Move the debug before the error (as it can take many pages.) This makes it
much easier for the user to see the actual error message as it is still on
the screen.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
André Draszik [Fri, 16 Sep 2016 10:06:29 +0000 (11:06 +0100)]
qemuboot.bbclass: don't fail on very first build
During the very first build, the DEPLOY_DIR_IMAGE
directory might not have been created yet, causing
the creation of the qemuboot.conf config file to
fail.
This is because write_qemuboot_conf() runs at
rootfs creation time, i.e. before deploy.
So let's create the directory if necessary before
trying to write the config file.
Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
externalsrc.bbclass: Make reparsing work for BBCLASSEXTENDed recipes
To make sure changes to any source files are detected when externalsrc
is used, it sets BB_DONT_CACHE to force the recipe to be reparsed
every time. Previously, this was done conditionally based on whether
EXTERNALSRC was set. This worked fine for building the base recipe.
But if one tried to build, e.g., a native version of it (provided via
BBCLASSEXTEND), the recipe would not be reparsed as expected.
To solve the above problem, BB_DONT_CACHE is now set for the base
recipe if EXTERNALSRC is set for it or any of it derivatives.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Fri, 16 Sep 2016 22:52:29 +0000 (15:52 -0700)]
kernel.bbclass: assign INITRAMFS_BASE_NAME using ?=
Default values for KERNEL_IMAGE_BASE_NAME and MODULE_IMAGE_BASE_NAME
are already assigned using ?= and anyone wanting to over-ride one is
likely to want to over-ride them all. Make the three consistent with
each other.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Fri, 16 Sep 2016 22:29:12 +0000 (15:29 -0700)]
dropbear: deterministic selection of system -vs- bundled libtom libs
Dropbear will use system versions of libtommath and libtomcrypt if
available. To make builds deterministic, add a PACKAGECONFIG option
to choose system libs or force use of the bundled versions.
Note that currently there are no libtommath or libtomcrypt recipes
in oe-core, so default to using the bundled versions.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Fri, 16 Sep 2016 22:29:11 +0000 (15:29 -0700)]
dropbear: fix -ltomcrypt -ltommath order when using system libtom libs
To prevent build failures when using system libtom libraries and
linking with --as-needed, LIBTOM_LIBS should be in the order
-ltomcrypt -ltommath, not the other way around, ie libs should be
prepended to LIBTOM_LIBS as they are found, not appended.
Note that LIBTOM_LIBS is not used when linking with the bundled
libtom libs.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu: work even if a *.qemuboot.conf isn't found
A qemuboot conf file is a convenience but it should still be
possible to invoke runqemu without them, especially for examples
such as using the SDK with an extracted rootfs via NFS.
As read_qemuboot() is always called we need to be sure that function
can return cleanly, without throwing Exceptions, even if a qemuboot
conf file isn't found.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu: try symlinks when kernel or rootfs can't be found
If the kernel or rootfs names written to the qemuboot.conf can't
be found, try and find the symlinked variant of the filename.
This will help usability of runqemu, for example where a user
downloads an image and associated files as the symlinked names
yet the qemuboot.conf variables point to the full, non-linked,
file names.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemuboot: write the full kernel filename, not the link name
KERNEL_IMAGETYPE gives the filename of a symlink to the kernel,
which may not be available i.e. if the user downloads some build
artefacts to run on a local machine. It's also possible that the
link will point to a newer kernel than was intended for use with
the rootfs in the qemuboot.conf.
It's much more reliable to read the name of the file
KERNEL_IMAGETYPE is linking to and assign the full filename to
QB_DEFAULT_KERNEL.
[YOCTO #10285]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu: add guidance to resolve issues with missing files
When a required binary cannot be found print some guidance pointing
to using a sourced OE build environment or a qemuboot.conf file,
based on a similar message from the previous shell-based runqemu.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Sun, 18 Sep 2016 20:08:13 +0000 (08:08 +1200)]
devtool: add: drop superfluous validation for recipe name
Now that recipeutils.validate_pn() properly validates characters used in
the name, we can drop this bit checking for '/' since that's not
permitted by validate_pn(). (The FIXME comment here - that I myself
apparently wrote - is questionable since that function was clearly never
intended to allow '/', perhaps I was misled because it was broken and
did so).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Sun, 18 Sep 2016 20:08:12 +0000 (08:08 +1200)]
lib/oe/recipeutils: fix invalid character detection in validate_pn()
* validate_pn() is supposed to protect against invalid characters, fix
the function so that it actually does (unanchored regex strikes
again...)
* However, now that the function is enforcing the restrictions, we do
still want to allow + in recipe names (e.g. "gtk+")
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Sun, 18 Sep 2016 20:08:11 +0000 (08:08 +1200)]
recipetool: create: support git short form URLs
In keeping with making recipetool create / devtool add as easy to use as
possible, users shouldn't have to know how to reformat git short form ssh
URLs for consumption by BitBake's fetcher (for example
user@git.example.com:repo.git should be expressed as
git://user@git.example.com/repo.git;protocol=ssh ) - instead we should
just take care of that automatically. Add some logic in the appropriate
places to do that.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Sun, 18 Sep 2016 20:08:09 +0000 (08:08 +1200)]
recipetool: create: pick up AC_PROG_SWIG
AX_PKG_SWIG is not the only commonly-used macro for detecting swig -
there's also AC_PROG_SWIG. As per AX_PKG_SWIG, add swig-native to
DEPENDS if AC_PROG_SWIG is found in configure.ac.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Sun, 18 Sep 2016 20:08:08 +0000 (08:08 +1200)]
recipetool: create: detect python autoconf macros
If python is required then we need to inherit pythonnative (or
python3native) otherwise do_configure will probably fail since it won't
be able to find python.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Sun, 18 Sep 2016 20:08:07 +0000 (08:08 +1200)]
recipetool: create: fix error with git tree and no network
When creating a recipe for an existing local git clone, we attempt to
use the fetcher to determine if it supports the SRCREV variable.
Unfortunately running this code does a network check to get the latest
revision as a direct result of us using '${AUTOREV}' as a default value.
If you don't have a network connection this will of course fail. Rather
than have this block creating the recipe, catch the exception and just
guess from the URL.
Ultimately this should probably be fixed in the fetcher but for now this
will at least resolve the issue on this end.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
>From this it would create a libunicodenames-1.1.0-beta1_1.1.0-beta1.bb
file (likely because it couldn't split the file name and therefore took
all of it, then got the version from one of the files inside the
tarball). When this happens it's just irritating because you then have
to delete the recipe / run devtool reset and then run recipetool create
/ devtool add again and specify the version manually.
This patch is the result of systematically running the
determine_from_filename() function over the files on the Yocto Project
source mirror and my local downloads directory and fixing as many of the
generic issues as reasonably practical - it now gets the name and
version correct much more often. There are still cases where it won't,
but they are now in the minority.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Try to ensure that for Apache, GPL and LGPL where the values extracted
from the "Classifiers" field may not be version-specific, if there is a
versioned license in the free-form license field then use that instead.
Also insert the free-form license field as a comment in the recipe for
the user's reference.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Sun, 18 Sep 2016 20:08:04 +0000 (08:08 +1200)]
recipetool: create: fix picking up name from local python source tree
Make use of the extravalues dict to send back other variable values from
the python handling plugin, and enable passing back PV and PN. This not
only places variable values in the final recipe a bit more consistently
with other types of source, it also allows the name and version to be
picked up fron a local source tree and not just when the recipe is
fetched from a remote URL that happens to have those in it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Mon, 19 Sep 2016 07:20:08 +0000 (00:20 -0700)]
runqemu: acquire_lock() should fail when failed to open the file
The open(self.lock, 'w') may fail when the lock is created by other
users, return false for this case to let it try other devices.
Fixed:
runqemu - INFO - Running /sbin/ip link...
runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap0.lock...
Traceback (most recent call last):
File "/buildarea/lyang1/poky/scripts/runqemu", line 972, in <module>
ret = main()
File "/buildarea/lyang1/poky/scripts/runqemu", line 963, in main
config.setup_network()
File "/buildarea/lyang1/poky/scripts/runqemu", line 810, in setup_network
self.setup_tap()
File "/buildarea/lyang1/poky/scripts/runqemu", line 761, in setup_tap
if self.acquire_lock():
File "/buildarea/lyang1/poky/scripts/runqemu", line 182, in acquire_lock
lock_descriptor = open(self.lock, 'w')
PermissionError: [Errno 13] Permission denied: '/tmp/qemu-tap-locks/tap0.lock'
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Not ship /usr/bin/glilypond and related files such
as man file /usr/share/man/man1/glilypond.1 and other
three files related to glilypond under
/usr/lib/groff/glilypond in embedded system, it is because:
- Remove the confusion about glilypond fails to run
because it lacks dependency on File::HomeDir perl
module
- We don't often have need for sheet music conversion
in groff in embedded or IoT devices (glilypond
transforms sheet music written in the lilypond language
into the groff language using the .PSPIC request, such
that groff can transform it into a format that can be
displayed directly).
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
