Kevin Tian [Thu, 20 Jan 2011 05:54:51 +0000 (13:54 +0800)]
siggen.py: better print for task hash comparison
current bitbake-diffsigs simply print out the whole 'runtaskdeps' when there's mismatch, which
is not very readable. On the other hand, 'runtaskhashes' comparison is broken which assumes
same key existing in two sides. This commit provides better output by figuring out differences
from addition, removal or hash change.
Scott Garman [Mon, 17 Jan 2011 23:24:58 +0000 (15:24 -0800)]
binutils: Fix QA staging errors for target binutils
* The spurious paths were caused by a -L on commandline which pointed to
build dir. So we dont use -L <wordir> -liberty instead use the
libiberty.a directly on commandline effects are same but .la does not
have the workdir path in deplibs
Patch obtained from OpenEmbedded, written by Khem Raj.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Scott Garman [Tue, 21 Dec 2010 22:17:58 +0000 (14:17 -0800)]
autotools.bbclass: libtool sysroot support changes
We do not do it for native recipes, as the native compiler should
fall back to a prefix of /usr and not solely depend on the sysroot.
Otherwise we end up staging everything in the native sysroot before
we start to build target recipes.
Also remove la mangling code, which is no longer necessary.
Commit derived from Khem Raj's OE commits.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Scott Garman [Wed, 12 Jan 2011 07:20:02 +0000 (23:20 -0800)]
libtool: fix library RPATHs
Enabling sysroot support exposed a bug where the final library
had an RPATH encoded into it which still pointed to the sysroot.
This works around the issue until it gets sorted out upstream.
Fix suggested by Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Scott Garman [Tue, 21 Dec 2010 18:46:15 +0000 (10:46 -0800)]
libtool: Changes to enable sysroot support
* Added OE patches by Khem Raj which enable sysroot support
and rename the command line option --with-sysroot to
--with-libtool-sysroot to avoid conflicts with binutils and
gcc
* Removed obsolete cross_compile.patch
* Changed SRC_URI_append to SRC_URI +=
* PR bump for all recipes
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Zhai Edwin [Sat, 15 Jan 2011 08:32:15 +0000 (16:32 +0800)]
qemu: Upgrade from 0.12.4 to 0.13.0
Patch status:
-- Removed --
arm-cp15-fix.patch
arm_timer-fix-oneshot-mode.patch
arm_timer-reload-timer-when-enabled.patch
cursor-shadow-fix.patch
-- They are already in upstream or some new changes make them useless.
-- Added --
parallel_make.patch: Fix "make -j(>=6)" failure
wacom-tablet-fix.patch: Fix seg fault of usb tablet.
port92_fix.patch: Fix boot failure on ppc due to port 0x92 conflict.
Dongxiao Xu [Thu, 20 Jan 2011 04:54:48 +0000 (12:54 +0800)]
meta-environment: Remove the recursive dependency on do_compile
It is not needed to have dependency on each do_compile of its recursive
depend tasks.
This problem is triggered by building meta-toolchain-sdk from prebuilt
result. Some packages like quilt-native, which is already been populated
and packaged by do_populate_sysroot_setscene and
do_package_write_xxx_setscene, however this recursive dependency of
do_compile triggers the tasks flow of "do_setscene --> do_fetch -->
do_unpack --> ..." again and do_setscene removes all the quilt-native
files, making the other recipes failed while do_patch.
Thanks for Kevin's help in root causing this issue.
CC: Lianhao Lu <lianhao.lu@intel.com> Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Take a real world testcase where you have two recipes, each of which
contains PACKAGES_DYNAMIC = "gdk-pixbuf-loaders-*" and recipes which
RDEPEND on some gdk-pixbuf-loaders-xxx package. To select between these
you need to set a PREFERRED_PROVIDER.
These are specified in the PN namespace so the locgical conclusion is
that setting PREFERRED_PROVIDER_gdk-pixbuf = "gtk+" should work. It
doesn't and instead checks crazy things.
The code was correctly finding the two possible providers, gtk+ and
gdk-pixbuf. It was however only accepting PREFERRED_PROVIDER_gtk+
= "gdk-pixbuf" to resolve this problem which reads as the exact
opposite to what was wanted.
This patch changes the code to do something that makes sense. I suspect
that before these changes it was pretty much a null operation rubber
stamping the single provider case. For Poky at least it exposes a few
cases where -nativesdk recipes were providing the same things as their
normal counterparts but these are genuine bugs in the metadata.
I've also attempted to make the multiple provider error message human
readable as I counldn't understand it and I doubt anyone else could
either.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nitin A Kamble [Thu, 20 Jan 2011 00:41:01 +0000 (16:41 -0800)]
apt: fix build issue with gcc dso linking change
All the libraries needs to be specified explicitely with the new gcc dso
linking change patch. This was causing build errors for this
recipe. Specifying the libpthread library explicitely for linking to work
without errors.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Wed, 19 Jan 2011 17:19:27 +0000 (09:19 -0800)]
zypper: fix build issue with gcc dso linking change
All the libraries needs to be specified explicitely with the new gcc dso
linking change patch. This was causing build errors for this
recipe. Specifying the libpthread library explicitely for linking to work
without errors.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Wed, 19 Jan 2011 01:21:41 +0000 (17:21 -0800)]
libzypp: fix build issue with gcc dso linking change
All the libraries needs to be specified explicitely with the new gcc dso
linking change patch. This was causing build errors for this
recipe. Specifying the libpthread library explicitely for linking to work
without errors.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Tue, 11 Jan 2011 18:32:10 +0000 (10:32 -0800)]
screenshot: fix build issue with gcc dso linking change
All the libraries needs to be specified explicitely with the new gcc dso
linking change patch. This was causing build errors for this
recipe. Specifying the libX11 libgdk-x11-2.0 and libgdk_pixbuf-2.0 libraries
explicitely for linking to work without errors.
This is identified as a libtool issue. While creating the libshot.la
file, libtool should have added these needed libraries in there.
A bug has been created for this issue:
http://bugzilla.pokylinux.org/show_bug.cgi?id=664
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Tue, 11 Jan 2011 17:48:49 +0000 (09:48 -0800)]
matchbox-stroke: : fix build issue with gcc dso linking change
All the libraries needs to be specified explicitely with the new gcc dso
linking change patch. This was causing build errors for this
recipe. Specifying the libxrender library explicitely for
linking to work without errors.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Tue, 11 Jan 2011 17:38:09 +0000 (09:38 -0800)]
dates: fix build issue with gcc dso linking change
All the libraries needs to be specified explicitely with the new gcc dso
linking change patch. This was causing build errors for this
recipe. Specifying the libm and libpango-1.0 libraries explicitely for
linking to work without errors.
This is identified as a libtool issue. While creating the libgtkdatesview.la
file, libtool should have added these needed libraries in there.
A bug has been created for this issue:
http://bugzilla.pokylinux.org/show_bug.cgi?id=664
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Tue, 11 Jan 2011 16:14:04 +0000 (08:14 -0800)]
fstests: fix build issue with gcc dso linking change
All the libraries needs to be specified explicitely with the new gcc dso
linking change patch. This was causing build errors for this
recipe. Specifying the libX11 library explicitely for linking to
work without errors.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Tue, 11 Jan 2011 15:43:49 +0000 (07:43 -0800)]
blktrace: fix build issue with gcc dso linking change
All the libraries needs to be specified explicitely with the new gcc dso
linking change patch. This was causing build errors for this
recipe. Specifying the libXrender library explicitely for linking to
work without errors.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Tue, 11 Jan 2011 15:34:03 +0000 (07:34 -0800)]
xtscal: fix build issue with gcc dso linking change
All the libraries needs to be specified explicitely with the new gcc dso
linking change patch. This was causing build errors for this
recipe. Specifying the libXrender library explicitely for linking to
work without errors.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Tue, 11 Jan 2011 15:22:37 +0000 (07:22 -0800)]
matchbox-desktop: fix build issue with gcc dso linking change
All the libraries needs to be specified explicitely with the new gcc dso
linking change patch. This was causing build errors for this
recipe. Specifying the libX11 library explicitely for linking to
work without errors.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Tue, 11 Jan 2011 15:16:13 +0000 (07:16 -0800)]
settings-daemon: fix build error with new gcc dso linking change
All the libraries needs to be specified explicitely with the new gcc dso
linking change patch. This was causing build errors for this
recipe. Specifying the libX11 library explicitely for linking to work
without errors.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Tue, 11 Jan 2011 11:49:06 +0000 (03:49 -0800)]
oprofileui: fix the build failure after gcc dso change
With a change in gcc all the libraries needs to be specified explicitely
for linking. That breaks compile for this package as libm is not
explicitely specified. This commit fixes that linking issue.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Nitin A Kamble [Thu, 6 Jan 2011 18:13:05 +0000 (10:13 -0800)]
gcc_4.5.1: add DSO linking change patch
This patch changes gcc's (ld's) linking behavior. It passes
--no-add-needed flag to ld. Because of it ld does not try to find
related libraries for linking, causing link failures. And these
link failures can be fixed by specifying the library to be linked
explicitely on the gcc command line.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Jingdong Lu [Wed, 19 Jan 2011 09:04:43 +0000 (17:04 +0800)]
python: Fix failures of LSB python-runtime tests.
Fix failues of LSB python-runtime tests.
test_largefile: add "ac_cv_sizeof_off_t=8" option explicitly into configure options in order to enable "LFS".
test_codecs, test_re, test_unicode: "--with-wctype-functions" will cause these tests failed, so remove it for LSB.
test_builtin, test_getargs: "sitecustomize.py" cause default encoding changed from "ascii" into "utf8" and it will cause these tests failed, so remove this file for LSB.
Koen Kooi [Tue, 18 Jan 2011 11:11:37 +0000 (12:11 +0100)]
distutils(-common-base) bbclass: sync with OE
When using python recipes imported from OE (e.g. python-cheetah) parsing only succeeds when python has already been built due to the PYTHON_DIR references.
This commit syncs the classes with OE to make it work, but keeps the *.pyo removal from yocto.
Koen Kooi [Tue, 18 Jan 2011 11:11:36 +0000 (12:11 +0100)]
python-dir bbclass: import from OE
This will be used later on when updating the distutils classes
A small deviation from OE is the use of PYTHON_BASEVERSION instead of non-deterministic python code. See https://lists.yoctoproject.org/pipermail/poky/2011-January/002320.html for some background info
Ilya Yanok [Mon, 17 Jan 2011 22:36:17 +0000 (01:36 +0300)]
openssl: drop the valgrind patch that introduce a security hole
debian/valgrind.patch is the 'famous' Debian OpenSSL patch responsible
for everyone using Debian and derivatives changing their keys. All keys
generated with the patched OpenSSL are compromised so at very least we
have to drop this patch for good.
Add poky-image-minimal-rt* image recipes. They are based on the minimal recipe
and add rt-tests for basic evaluation of a board with a PREEMPT_RT kernel.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Darren Hart [Mon, 20 Dec 2010 23:02:40 +0000 (15:02 -0800)]
meta-rt: Initial PREEMPT_RT layer and kernel recipes
The meta-rt layer provides a preempt_rt kernel recipe
using the linux-yocto-stable git tree. It overrides
the virtual/kernel provider and defines the compatible
machines and per-machine SRCREVs. The initial layer
supports only qemux86-64.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Mark Hatle [Tue, 18 Jan 2011 16:07:32 +0000 (10:07 -0600)]
sanity.bbclass: Disable TERMCMD checking with noop patching
If PATCHRESOLVE is set to "noop", then it isn't supposed to try and
resolve patches at all, and thus does not need TERMCMD. Therefore,
make sure Poky doesn't check for (and possibly fail at finding)
TERMCMD if it isn't needed in the first place.
Signed-off-by: Derek Buitenhuis <dbuitenh@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Jiajun Xu [Tue, 18 Jan 2011 16:22:30 +0000 (00:22 +0800)]
qemuimagetest: Use same image during sanity testing instead of copying a new image for each case
To reduce the time on sanity testing, we remove variable SHARE_IMAGE and use
a new variable TEST_SERIALIZE in local.conf. It is by default set to 1. Poky
will copy and boot the to-be tested image for only once. It will not remove
or kill the image and test cases will be serialized executed against the same
image. If it is set to 0, image is always be copied for each cases, which takes
much time. I had a experiment that latest qemuppc sato only takes 7 minutes to
finish 9 sanity test cases, which takes more than 20 minutes before.
I also removed sanity case "boot" from sato/sdk/lsb because the other cases for
these targets already cover the check point of "boot".
Zhai Edwin [Fri, 17 Dec 2010 02:00:20 +0000 (10:00 +0800)]
apr: Update to 1.4.2
Add buildconf_fix.patch of removing new libtool detection method to avoid config
failure. Handled build/libtool.m4 & apr_rules.mk after configure to take place
of "top_builddir" by "apr_builddir", as these files would be reused by apr-util.
Zhai Edwin [Thu, 25 Nov 2010 06:42:43 +0000 (14:42 +0800)]
gdk-pixbuf: Add 2.22.1 as new recipe
Updating gtk+ to 2.23.2 requires gdk-pixbuf, which is originaly a module in gtk+.
Borrow hardcoded_libtool.patch from original gtk+, and add configure_fix.patch
to fix build failure in cross-compile environment.
As gdk-pixbuf is a stand-alone package now, gdk-pixbuf-csource-native can be
safely removed. So extend gdk-pixbuf with native support, and make related
packages depend on it.
Bruce Ashfield [Mon, 17 Jan 2011 21:34:58 +0000 (16:34 -0500)]
linux-yocto: update validate_branches to detected invalid commit IDs
The previous implementation of invalid commit ID checks would
error early when a bad object was detected. Rather than changing
to set +e for the entire routine, we'll capture the output and
do an explicit check for a bad object and throw a useful error
message when it is detected.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Fri, 14 Jan 2011 05:33:26 +0000 (00:33 -0500)]
linux-yocto: streamline new BSP creation
By setting BOOTSTRAP to the branch that should be used for a
currently undefined BSP a build can be completed and an
environment for streamlining the BSP created.
With the appropriate machine.conf, and a defconfig any MACHINE
can be built against and inherit the configuration of the
standard yocto kernel.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Tue, 11 Jan 2011 18:30:08 +0000 (13:30 -0500)]
linux-yocto: beagleboard enablement
Enable beagleboard support for 2.6.37. The only non-kernel related
change for the board is to update the serial console designation.
The Beagleboard use omap serial driver, so we replace ttyS2 with ttyO2.
This is described in following link:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg40838.html
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Liming Wang <liming.wang@windriver.com>
Scott Rifenbark [Fri, 14 Jan 2011 19:10:04 +0000 (11:10 -0800)]
documentation/yocto-project-qs: Updated the Packages section.
Added the packages autoconf and automake to both the Debeian-based
host and the RPM-based host example commands. During a fresh
development host system test run I found these packages were
necessary to develop Yocto projects using Eclipse IDE.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Yu Ke [Fri, 14 Jan 2011 09:05:33 +0000 (17:05 +0800)]
mesa: add mesa 7.8.2
The latest mesa 7.10 has dependency on GPLv3 library talloc, so it is still necessary to keep one old non-GPLv3 mesa.And the latest non-GPLv3 version is mesa 7.8.2, so this patch add it.
Yu Ke [Fri, 14 Jan 2011 08:39:59 +0000 (16:39 +0800)]
mesa: upgrade to mesa 7.10
- add SRC_URI checksum
- remove the DEFAULT_PREFERENCE for atom_pc, since mesa 7.10 has dependency on GPLv3 talloc. the latest non-GPLv3 one is mesa 7.8.2, atom_pc can use that vesion.
Yu Ke [Fri, 14 Jan 2011 06:47:07 +0000 (14:47 +0800)]
xf86-input-synaptics: upgrade to 1.3.0
- update license checksum due to commit "COPYING: add three missing authors listed in synaptics.c". the license type is unchanged.
- Pass correct "sdkdir" value for cross compiling
