Phil Blundell [Fri, 10 Jan 2014 14:38:32 +0000 (14:38 +0000)]
package: Keep global pkgfiles[] up to date when snapping library symlinks
Since ca86603607a69a17cc5540d69de0e242b33382d3 we are now calling stat() on
all the pkgfiles[] during emit_pkgdata(). If symlink snapping has removed
some of the files then we will blow up trying to stat a path that no longer
exists. Fix that by ensuring that pkgfiles[] is updated when we process the
list of library renames.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Phil Blundell [Fri, 10 Jan 2014 12:54:16 +0000 (12:54 +0000)]
binutils: Also add autoconf-native to DEPENDS
Commit 616354f13732d13c17434d5b60b166f691c25761 is insufficient because
gnu-config-native's gnu-configize script uses perl modules from autoconf
and hence doesn't work unless autoconf-native is staged (which it may
not be if building from sstate).
Ideally g-c-n would itself declare a dependency on autoconf-native but this
is difficult to arrange without creating a dependency loop. autoconf-native
already depends on gnu-config-native (because autoreconf invokes gnu-configize)
and has a build dependency on m4-native, which in turn build-depends on g-c-n
because it configizes itself by steam in do_configure and needs config.{guess,sub}
to be available. Adding some sort of gnu-config-initial-native recipe would
fix the latter problem, but this would be ugly because it would need special-casing
in (at least) autotools.bbclass, and in any case this still wouldn't solve
the problem of autoconf itself depending on g-c-n.
So, the easiest solution to the problem at hand is to arrange for those
few recipes that depend on g-c-n but not autoconf-native to gain that
latter dependency as well.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Phil Blundell [Fri, 10 Jan 2014 12:57:02 +0000 (12:57 +0000)]
kernel-module-split: Remove extraneous call to depmod from module postinst
During rootfs construction, image.bbclass will call depmod after all the
modules are installed. There's no need to run it from the postinst when
operating in offline root mode.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Phil Blundell [Thu, 9 Jan 2014 11:16:10 +0000 (11:16 +0000)]
libsoup: Remove libproxy from DEPENDS
Although libsoup did use to support direct usage of libproxy, it hasn't
done so for some time. Worse, if libsoup depends on libproxy then it
is impossible to build libproxy against webkit since webkit itself
depends on libsoup in some configurations. Fix this by removing the
extraneous entry from DEPENDS.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Phil Blundell [Thu, 9 Jan 2014 11:18:26 +0000 (11:18 +0000)]
qemu: Remove stray .git files after unpacking
The qemu tarball ships some extraneous .git metadata in the dtc/ and pixman/
subfolders, containing a reference to the path "../.git/modules" which
doesn't exist. The presence of these files will confuse git if it happens
to recurse into the qemu source folder during an operation on some parent
directory, for example "git clean" at a higher level. Avoid that problem
(mostly) by removing them immediately after the sources are unpacked.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libpam: add a new 'nullok_secure' option support to pam_unix
'null_ok_secure' option was fixed. Since that commit 'su' stopped working in
pseudo terminals (created in X environments) for root-accounts with empty
password.
Background: The PAM configuration for 'su' includes 'common-auth' which uses
'nullok_secure' option for pam_unix.
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Chen Qi [Mon, 23 Dec 2013 08:16:47 +0000 (03:16 -0500)]
busybox: enable SEAMLESS_XZ by default
We have enabled SEAMLESS_GZ and SEAMLESS_BZ2 in defconfig, it's
reasonable for us to enable SEAMLESS_XZ as well. Otherwise, we
couldn't extract tar.xz file while we could extract tar.gz file.
Such situation would be somewhat confusing.
Cristian Iorga [Wed, 8 Jan 2014 10:13:26 +0000 (12:13 +0200)]
qemu: upgrade to 1.7.0
linux-user-Handle-SOCK_CLOEXEC-NONBLOCK-if-unavailab.patch
file no longer needed, included in upstream.
qemu-native tested on all architectures,
host machine is Ubuntu Linux 13.10 x86-64.
Basic X11 and networking tests performed.
Paul Barker [Mon, 6 Jan 2014 11:55:14 +0000 (11:55 +0000)]
libarchive: Upgrade to v3.1.2
All patches against libarchive in oe-core appear to be merged into the latest
release. The license checksum has changed because a couple of referenced files
have been renamed but there is no change to the license terms themselves.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Ming Liu [Thu, 14 Nov 2013 10:51:28 +0000 (18:51 +0800)]
sstate: Add optimizing logic for crosssdk setscene dependencies
This patch mainly aims to add optimisation for crosssdk setscene dependency
validating which we haven't handled in current logic, and which I think we
could have as we've already implemented to native/cross, although there
are albeit not many crossdk tasks, we could still get some performance
enhancement.
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kevin Baker [Sat, 4 Jan 2014 04:46:05 +0000 (22:46 -0600)]
screen: update debian patchset to version 4.0.3-14
This recipe used an old version of the debian update patchset from Lenny which
does not exist anymore on Debian's FTP servers. Update to the latest set
version 4.0.3-14 which also includes some minor bug fixes and security updates.
Cleanly builds and runs in our armv7a-vfp-neon environment.
Signed-off-by: Kevin Baker <kbaker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Sat, 4 Jan 2014 17:20:20 +0000 (18:20 +0100)]
python: explicitly disable bluetooth.h check
* bluetooth.h is autodetected from sysroot and influences 2 python files:
/usr/include/python2.7/pyconfig-32.h
/usr/lib/python2.7/lib-dynload/_socket.so
* it doesn't link with bluez, so it wasn't detected by
test-dependencies.sh, but still causes undeterministic builds and
should be fixed
* we can use PACKAGECONFIG, but I don't expect many people to use bt
support in python-socket
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Koen Kooi [Mon, 6 Jan 2014 11:01:25 +0000 (12:01 +0100)]
grub: add git version
Recently grub git gained support for ARM builds (using u-boot or EFI as first stage loader) and with 2 extra patches we get support for 64-bit ARM as well.
Buildtested for genericarmv7a, genericarmv8 and qemux86. The genericarmv8 build fails in do_package/strip due to a binutils problem.
Signed-off-by: Koen Kooi <koen.kooi@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Mon, 6 Jan 2014 07:27:34 +0000 (15:27 +0800)]
initscripts: split the functions script into a separate package
Many SysV init scripts need the /etc/init.d/functions script. But
this script is part of the initscripts package. As a result, the
initscripts package should always be installed into the system to
avoid errors when starting daemons. However, it makes no sense to
install the initscripts package into a systemd based image, because
what the init scripts provide has already been provided by the systemd.
On the other hand, the functions script might be still needed in a
systemd based image because other init scripts such as distcc might need
it.
The above situation leads to a natural separation of the functions script
from the initscripts package. And this patch does so. It separates the
functions script into initscripts-functions packages.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
*Some* packages have migrated away from gconf to gsettings. Not all
packages have done this, so anything still using gconf is now broken.
Note that almost nothing in oe-core uses gsettings as we're still
using the GTK+ 2 stack generally.
The problem is that people are using gnome.bbclass which is a kitchen
sink class, inheriting many other classes that may or may not be used.
To resolve this warning gnome.bbclass should extend the sanity check
whitelist with --disable-schemas-install as it is the class causing
gconf.bbclass to be inherited on recipes that don't use gconf.
Philip Balister [Sun, 29 Dec 2013 18:27:38 +0000 (13:27 -0500)]
db : Include C++ binding library in Berkeley DB recipe.
Create the C++ library for db. This library is packaged in a new
package so the db package only contains the c library. This prevents
existing users from adding libstdc++ to the package DEPENDS.
Signed-off-by: Philip Balister <philip@balister.org> Signed-off-by: Douglas Geiger <doug.geiger@bioradiation.net> Signed-off-by: Steve Arnold <esteve@gentoogeek.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Chong Lu [Fri, 3 Jan 2014 06:51:30 +0000 (14:51 +0800)]
quilt: enable ptest support
Install quilt test suite and run it as ptest.
Exclude delete.test and mail.test.
delete.test need execute with normal user and mail.test need depend
on mail agent, else these test cases will fail. So exclude them order
to make ptest all pass.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Mike Crowe [Fri, 3 Jan 2014 14:28:39 +0000 (14:28 +0000)]
valgrind: rrecommend libc6-dbg on all architectures
It seems that valgrind requires debug symbols to be available on all
architectures so there's no reason to treat arm and powerpc specially.
Ensuring that libc6-dbg is installed avoids errors like this on x86:
valgrind: Fatal error at startup: a function redirection
valgrind: which is mandatory for this platform-tool combination
valgrind: cannot be set up. Details of the redirection are:
valgrind:
valgrind: A must-be-redirected function
valgrind: whose name matches the pattern: strlen
valgrind: in an object with soname matching: ld-linux.so.2
valgrind: was not found whilst processing
valgrind: symbols from the object with soname: ld-linux.so.2
valgrind:
valgrind: Possible fixes: (1, short term): install glibc's debuginfo
valgrind: package on this machine. (2, longer term): ask the packagers
valgrind: for your Linux distribution to please in future ship a non-
valgrind: stripped ld.so (or whatever the dynamic linker .so is called)
valgrind: that exports the above-named function using the standard
valgrind: calling conventions for this platform. The package you need
valgrind: to install for fix (1) is called
valgrind:
valgrind: On Debian, Ubuntu: libc6-dbg
valgrind: On SuSE, openSuSE, Fedora, RHEL: glibc-debuginfo
valgrind:
valgrind: Cannot continue -- exiting now. Sorry.
Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Petter Mabäcker [Fri, 3 Jan 2014 18:11:43 +0000 (19:11 +0100)]
cdrtools-native: remove unused FILESPATH
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
However in cdrtools no FILESPATH additions are currently needed so
instead it should be removed.
Robert Yang [Fri, 27 Dec 2013 13:46:10 +0000 (21:46 +0800)]
make: upgrade to 4.0
Upgrade to 4.0, remove the following patches since they have been fixed
by the upgrade:
- expand_MAKEFLAGS.patch
- intermediate-target-bugfix.patch
- make-savannah-bug30612-fix_white_space.patch
- make-savannah-bug30612-handling_of_archives.patch
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Robert Yang [Thu, 2 Jan 2014 08:37:34 +0000 (03:37 -0500)]
logrotate: two minor fixes
* Change EXTRA_OEMAKE = "CC='${CC}'" to "", the root cause is the "-e"
from EXTRA_OEMAKE makes the CFLAGS from the env overrides the one
defined in logrotate/Makefile which causes build failures, so we need to
set EXTRA_OEMAKE to "", set it to CC='${CC}' would confuse the user
since CC='${CC}' has been defined in the env.
* Merge do_install() and do_install_append()
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Robert Yang [Thu, 2 Jan 2014 08:29:45 +0000 (03:29 -0500)]
logrotate: upgrade to 3.8.7
* Upgrade to 3.8.7
* Rename the patches dir from logrotate-3.8.1 -> logrotate
* Remove grotate-CVE-2011-1548.patch since it had been fixed
* Update act-as-mv-when-rotate.patch and update-the-manual.patch to make
them work with the higher version, and send them to the upstream
* Fix the HOMEPAGE
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Robert Yang [Tue, 31 Dec 2013 17:25:17 +0000 (01:25 +0800)]
e2fsprogs: upgrade to 1.42.9
* Upgrade to 1.42.9
* Remove the following patches since they have been merged/fixed by
upstream:
- debugfs-extent-header.patch
- debugfs-sparse-copy.patch
- debugfs-too-short.patch
- e2fsprogs-fix-tests-f_extent_oobounds.patch
- fallocate.patch
* The populate-extfs.sh had been merged by the upstream, but I'd like to
go on using the previous one which is from our meta layer, they are a
little different, and the script would be dropped when we use the mke2fs
to populate the rootfs.
* Sumitted the patch for populate-extfs.sh (from Søren Holm) to upstream.
* Submitted fix-icache.patch to upstream, I wrongly thought it was not
applicable to the upstream, but it does.
* Join the do_install() and do_install_append() together.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Robert Yang [Wed, 1 Jan 2014 03:27:09 +0000 (11:27 +0800)]
mime.bbclass: remove the --disable-update-mimedb
Gnome and other freedesktop's mime data has been moved to
shared-mime-info, and there is no such an option any more, we already
have this recipe, so remove it, this will fix the warning:
configure was passed unrecognised options: --disable-update-mimedb
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Robert Yang [Wed, 1 Jan 2014 03:22:15 +0000 (11:22 +0800)]
gconf.bbclass: remove --disable-schemas-install
Gnome has moved the schemas to the gsettings-desktop-schemas pkg, so
there is no --disable-schemas-install option any more, and we already
have the gsettings-desktop-schemas recipe, so remove it, it wil fix
the warning:
configure was passed unrecognised options: --disable-schemas-install
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Chen Qi [Thu, 2 Jan 2014 06:28:32 +0000 (14:28 +0800)]
coreutils: upgrade to 8.22
Upgrade coreutils to 8.22.
Changes since 8.21:
1) Remove the acl patch as it's not needed now.
2) Add a new patch to fix the following compile error.
"dummy-man: too many non-option arguments"
Chen Qi [Fri, 20 Dec 2013 02:45:52 +0000 (10:45 +0800)]
image.bbclass: add ability to set systemd default target
Add ability to set the default target for systemd images.
The default target for system is controlled by SYSTEMD_DEFAULT_TARGET.
The default value for this variable is derived from checking whether
IMAGE_FEATURES contains 'x11-base' or not. Each image could override
this value in its own recipe. For now, we don't need to do any change,
because all images that support graphical environment has 'x11-base'
in its IMAGE_FEATURES.
Paul Eggleton [Sat, 28 Dec 2013 19:58:39 +0000 (19:58 +0000)]
classes/package: set SUMMARY in do_split_packages()
do_split_packages() is commonly used to split out plugin/module packages
dynamically within recipes. If it doesn't set SUMMARY for each of these
packages then they get a generic SUMMARY from the recipe, which isn't
particularly useful; so add a parameter to set this and default it from
the current description parameter (it ought to have been the other way
around, but the description parameter is what we currently have in use
by all recipes that use this function.)
Fixes [YOCTO #5406].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Paul Eggleton [Sat, 28 Dec 2013 19:46:08 +0000 (19:46 +0000)]
bitbake.conf: add full stop to default DESCRIPTION
SUMMARY should not end with a full stop; however if DESCRIPTION is not
set in a recipe and thus defaulted from SUMMARY, the additional
DESCRIPTION values for other standard packages e.g. ${PN}-dev look a bit
odd without a full stop separating the SUMMARY value and the rest of the
text. Add a full stop to avoid this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Paul Eggleton [Thu, 19 Dec 2013 15:13:01 +0000 (15:13 +0000)]
Tweak SUMMARY
For these recipes, I took the opportunity to fix up the new SUMMARY
values as the originals needed tweaking. I've tried to make them
concisely explain the function of the recipe / package where possible.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Ross Burton [Mon, 23 Dec 2013 17:32:56 +0000 (17:32 +0000)]
dbus: enable API entry point checks
We were disabling API entry point sanity checking which should only be done if
the performance gain is prefereable to correctness. Instead don't disable
checks explicitly as the default is enabled, allowing distributions to append
--disable-checks if required.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 23 Dec 2013 20:59:50 +0000 (20:59 +0000)]
README: fix DISTRO = "" reference
DISTRO should be set to "nodistro" for distro-less configurations since
empty string results in empty items ending up in OVERRIDES leading to
unexpected behaviour with FILESPATH.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 23 Dec 2013 20:59:49 +0000 (20:59 +0000)]
Fix license notices for OE-Core
* Fix up LICENSE:
- Replace reference to Poky with OpenEmbedded
- Remove reference to bitbake and meta-extras that aren't part of this
repository
- Clarify license statements
* Add a COPYING.GPLv2 file in meta/ for the GPLv2 parts
* Add a COPYING.MIT file to meta-skeleton consistent with the other
meta-* directories
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Tue, 31 Dec 2013 19:59:24 +0000 (13:59 -0600)]
systemtap: Add --enable-prologues to configuration
In some cases, the debuginfo generated by the compiler is insufficient
for systemtap to figure out function param locations; using -P allows
it to use prologue searching to find the correct locations.
Enable prologue searching in the configuration so the user doesn't
have to specify it manually.
Fixes [YOCTO #5403].
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jacob Kroon [Mon, 30 Dec 2013 18:17:58 +0000 (19:17 +0100)]
meta/lib/oe/terminal.py: Don't pass non-supported '--disable-factory' flag to gnome-terminal
By default, all GNOME terminals share a single process,
reducing memory usage. This can be disabled by starting gnome-terminal
with the --disable-factory option
However, gnome-terminal in Fedora 20 does no longer support the
'--disable-factory' flag, so remove it. As the support for 'mate' terminals was
added as a copy of the gnome code in 8cc078a9c679845464c59028f584d7aba098cc1f,
remove the flag here aswell.
Signed-off-by: Jacob Kroon <jacob.kroon@mikrodidakt.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Mon, 30 Dec 2013 14:50:18 +0000 (15:50 +0100)]
kmod: fix zlib dependency
* unlike BBCLASSEXTENDed native support, dependencies in kmod-native doesn't get
automatic -native suffix, so kmod-native was depending on target zlib.
* move the dependency from .inc and apply it with right suffix
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids the following error messages when no dependency
issue detected:
find: `/build/r_cgp-dep_1225/p_x86_1225/bitbake_build/tmp/work/': No such file or directory
grep: test-dependencies/1388042399/3_min/failed/*: No such file or directory
ls: cannot access test-dependencies/1388042399/3_min/failed/*: No such file or directory
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -with-cxx changed to with-cxx-main sometime around the 2.5 time frame
It appears that there never was a with-cyclic-gc configure option, or if
there was it was from some past patch we no longer have.
This option appears to be commented out in the configure.ac with no explaination,
It does not appear to be commented out in the source, so it occurs during the sqlite
release process!
Paul Eggleton [Wed, 29 May 2013 16:27:51 +0000 (17:27 +0100)]
bitbake.conf: set a default for MACHINE_FEATURES
Ensure that if MACHINE_FEATURES is not set by the machine config that we
don't end up with expansion errors during parsing. Technically since the
introduction of MACHINE_FEATURES_BACKFILL = "rtc" this is unlikely to be
a problem unless "rtc" is also added to
MACHINE_FEATURES_BACKFILL_CONSIDERED, however we should be consistent
with DISTRO_FEATURES which is defaulted in bitbake.conf.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
