So that DEPENDS, RDEPENDS_${PN} and EXTRA_OECONF can be automatically
built from specific options. Those options can easily be customised
by the distro config or the user.
Based on some ideas from Chris Elston <celston@katalix.com> but with
an improved easier to use one line interface.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kumar Gala [Tue, 4 Oct 2011 22:03:05 +0000 (17:03 -0500)]
scripts/oe-buildenv-internal: Add SOCKS5_{USER, PASSWD} to BB_ENV_EXTRAWHITE
If a SOCKS5 gateway is needed for a proxy access like git it might also
require authentication to the proxy via a password and username. Adding
SOCKS5_USER & SOCKS5_PASSWD to BB_ENV_EXTRAWHITE allow for automation
of the authentication request to occur when something like a git fetch
is going through the proxy.
This patch requires the bitbake patch to add extra exportvars so
these variables get passed from Env -> bitbake -> fetcher
Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Sat, 1 Oct 2011 15:05:34 +0000 (10:05 -0500)]
kexec-tools: fix architecture mismatch QA error
Building sato-sdk for an x86_64 target throws this QA error:
| ERROR: QA Issue: Architecture did not match (62 to 3) on /work/x86_64-poky-li\
nux/kexec-tools-2.0.2-r1/packages-split/kexec-tools/usr/lib/kexec-tools/kexec_t\
est
kexec_test uses 32-bit code for testing - add an INSANE_SKIP exception for it.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 4 Oct 2011 21:00:56 +0000 (17:00 -0400)]
linux-yocto: update live boot configuration
Updating the meta SRCREV to import a series of changes to synchronize
live booting between multiple targets:
d05450e meta/fri2: enable booting from iso 3da7d2a meta/fishriver: enable booting from iso 52e1c49 meta/emenlow: enable booting from iso 87918ae meta/crownbay: enable booting from iso
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
James Limbouris [Tue, 4 Oct 2011 01:42:22 +0000 (09:42 +0800)]
qt4-embedded: move qt4-embedded-conf from RDEPENDS to RRECOMMENDS
qt4-embedded-conf contains an environment setup script for profile.d.
It has been packaged seperately to allow for its exclusion, but this is
only practical if it is added to RRECOMMENDS, rather than RDEPENDS.
Signed-off-by: James Limbouris <james@digitalmatter.com.au> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Sun, 2 Oct 2011 21:46:10 +0000 (01:46 +0400)]
qt4: Fix translation support
The translation support was disable in build. The
fix-translation.patch was imported from OpenEmbedded to fix a linking
issue in phonon translation support.
[Dmitry Eremin-Solenikov: ported to apply to qt 4.7.4 build, bumped PR]
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Fri, 30 Sep 2011 16:36:01 +0000 (18:36 +0200)]
hal-info: drop PACKAGE_ARCH all
RP: It would be better if we could find a way to patch out the compiler
checks in this package...
JaMa: drop PACKAGE_ARCH for now (nobody likes hal nowadays)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Richard Purdie [Tue, 17 May 2011 23:03:02 +0000 (23:03 +0000)]
Improve handling of 'all' architecture recipes and their interaction with sstate
* Jansa: rebased on current master, added nocompiler patch also to
font-alias, dropped allarch from linux-firmware, gnome-icon-theme, hal-info as
those are checking compiler (ie in intltool check) and better to build
them as default arch instead of rebuilding after every machine
change.
* this is also part of [BUGID# 1075]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Eric Bénard [Tue, 20 Sep 2011 20:07:33 +0000 (22:07 +0200)]
qt4: Update to latest version 4.7.4
- 4.7.4 was release on the 1st of september, the changelog is available
here : http://qt.gitorious.org/+qt-developers/qt/releases/blobs/v4.7.4/dist/changes-4.7.4
and mostly contains bug fix.
- this patch include the fix for QTBUG-20925 which was a regression
against 4.7.3 : https://bugreports.qt.nokia.com/browse/QTBUG-20925
http://qt.gitorious.org/qt/qt/commit/852abfca6f4c349dce9b895956922f96d82df579
thanks to Paul Eggleton to point us to this bug.
Otavio Salvador [Thu, 15 Sep 2011 11:47:16 +0000 (11:47 +0000)]
qt4: Fix translation support
The translation support was disable in build. The
fix-translation.patch was imported from OpenEmbedded to fix a linking
issue in phonon translation support.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
qt4.inc: package qtdemo's docs in a separate package
The documentation was 285M and doesn't fit on the NAND of many machines,
but in another had part of the documentation is needed for the
QT demos, so we split the documentation: so qt demo only RRECOMMAND
the documentation that it really needs.
Thanks to Eric Bénard for explaining me how to split it.
Without the -no-neon flag, neon is "autodetected"
by looking if the compiler is capable of compiling
a neon test, and succeed, and neon is then enabled
during the compilation.
Eric Bénard [Sat, 10 Sep 2011 09:17:57 +0000 (11:17 +0200)]
qt4: fix generated sdk
- qt4-tools-nativesdk : actually the qmake binary which gets installed
comes from the native recipe. This patch fix this problem by launching
configure twice : once to compile qmake using the right toolchain for
nativesdk, and a second time using the native qmake to compile all the
other tools for the nativesdk. Then we install the right qmake.
- mkspec : the link actually created in qt4-tools-nativesdk's
do_install point to nowhere so remove it and generate the link in
meta-toolchain-qte as it's the only place where we have all the variable
to create it.
- toolchain_create_sdk_env_script_append : we need to add OE_QMAKE_CFLAGS,
OE_QMAKE_CXXFLAGS and OE_QMAKE_LDFLAGS else the sdk won't find these
variables that are inserted by qmake in the Makefiles.
- with this patch, oe-core generates a working meta-toolchain-qte which
can compile a small example and is properly recognized by qtcreator (this
brings oe-core's meta-toolchain-qte to oe-dev's functional state).
Richard Purdie [Thu, 29 Sep 2011 22:48:20 +0000 (23:48 +0100)]
bitbake.conf: Start using parallel make for do_install
Most piece of software now support parallel make install. Enable
this by default using the value of PARALLEL_MAKE. In a similar way
to PARALLEL_MAKE we can disable this for broken recipes with:
PARALLEL_MAKEINST = ""
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 29 Sep 2011 22:30:26 +0000 (23:30 +0100)]
base.bbclass: Drop unneeded dependency
patch depends on unpack
configure depends on patch
We simply don't need a configure dependency on unpack. This simplifies
the dependencies of every recipe slightly and should make bitbake
slightly faster at resovling dependency graphs.
It also makes the .dot dependency graphs slightly more readable by
removing noise.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 29 Sep 2011 22:29:08 +0000 (23:29 +0100)]
autotools: Disable dependency tracking
There is no point in us spending time generating a ton of dependency
information in source directories when we don't actually use it
for our one off builds. We might as well disable the option and
take the speed up.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 29 Sep 2011 22:26:07 +0000 (23:26 +0100)]
Remove help2man dependency
The help2man script is pretty useless to us. It requires to run the target
binary to extract help information which is not possible for any of our
cross compiled target binaries.
We're not interested in man pages for -cross/-native tools.
It therefore makes no sense to have this as a core build dependency.
This patch removes the dependeny and replaces it with a script
returning false. This will trigger autotool's missing utility
to use the copy of the man page included with the sources which
is what would already happen when we tried to run cross compiled
binaries anyway.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This core does not have altivec, so we disable it in the build,
also reestablish the config option to enable/disable building
with altivec
If SPE is not detected we always build with altivec which is wrong. This
will check to make sure altivec is enabled and pass build options
through accordingly
Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add proper deps for nfs-utils, util-linux, and strace
These packages need these deps for the RPM generation stage:
error: Failed dependencies:
| /usr/bin/python is needed by nfs-utils-1.2.3-r2.ppce5500
| /usr/bin/perl is needed by util-linux-2.19.1-r4.ppce5500
| /usr/bin/perl is needed by strace-4.5.20-r2.ppce5500
Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for generating ext2.bz2{, .u-boot} images
Machines can now add ext2.bz2 and ext2.bz2.u-boot images as a
generated image type. This also adds an extra parameter to
oe_mkimage which is the image compression type for mkimage
Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 29 Sep 2011 22:35:16 +0000 (23:35 +0100)]
insane: Promote most warnings into QA errors by default
We agreed a while back that we'd start ERRORing on QA issues, not just
WARNING about them. This patch changes the default QA levels to error
on everything except ldflag and useless rpath issues.
It also stops giving out QA warnings about desktop files since it
adds noise to the build and until someone plans to seriously tackle
that problem, its pointless.
We can promote the ldflag and rpath warnings too, when the issues in
OE-Core are resolved (they're mostly there now, just a few more to go).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andrew Gabbasov [Wed, 28 Sep 2011 12:07:58 +0000 (16:07 +0400)]
apmd: use ${HOST_SYS}-libtool
libtool-cross uses ${HOST_SYS}- prefix while building and installing.
In some cases that may be different from ${TARGET_PREFIX}, that is currently
used in apmd recipe. It's better to have them consistent.
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andrew Gabbasov [Wed, 28 Sep 2011 12:09:52 +0000 (16:09 +0400)]
apr: use ${HOST_SYS}-libtool
libtool-cross uses ${HOST_SYS}- prefix while building and installing.
In some cases that may be different from ${TARGET_PREFIX}, that is currently
used in apr recipe. It's better to have them consistent.
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andrew Gabbasov [Wed, 28 Sep 2011 12:10:30 +0000 (16:10 +0400)]
libpam: add flex-native to DEPENDS
flex-native is required for building libpam. Although this dependency
is now fulfilled indirectly through bison recipe, having an explicit one
would be preferable.
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andrew Gabbasov [Wed, 28 Sep 2011 12:10:12 +0000 (16:10 +0400)]
cmake.bbclass: adding extendable extra variable to root path
Introducing a hook variable for various .conf files to add
extra path elements to cmake. For example, it can be used
in external toolchain conf file to add ${TOOLCHAIN_PATH}
to cmake root path search.
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Wed, 28 Sep 2011 15:28:25 +0000 (16:28 +0100)]
scripts: use OE_TMPDIR instead of TMPDIR external variable
On OpenSUSE within an X session, TMPDIR is set to the system temporary
directory (/tmp) which is incorrect for these scripts. Thus, change
runqemu and oe-setup-rpmrepo to use OE_TMPDIR from the external
environment rather than TMPDIR.
Fixes [YOCTO #1530]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
currently we have allarch type of recipes, which may still have
architecture dependency, like x11-common. So we need to drop the
handling to allarch in multilib case.
Also remove the PV postfix in python-pygobject DEPENDS, since multilib
code will treat a native package multilib capable.
ghostscript has it's own hacky check for time.h which hard-codes paths, this
means in the native case it fails on systems such as Ubuntu 11.10 where the
location of time.h has changed. Further it means the target build has had a
host-intrusion issue.
This patch disables the check for time.h, future releases of ghostscript
use standard autotools checks for time.h's location.
