Bruce Ashfield [Wed, 20 Aug 2014 16:21:30 +0000 (12:21 -0400)]
linux-yocto/3.14: fix common clock framework support in PCI glue layer
The initial version of "spi/pxa2xx: Add common clock framework support in PCI glue layer"
enables the baytrail series of processors, but breaks some existing users of
the framework.
There's a new version of the patch out for review, so we revert the broken one and
udpate to the latest.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Wed, 20 Aug 2014 16:21:29 +0000 (12:21 -0400)]
linux-yocto/3.14: KASLR and VDSO backports
Updating the 3.14 linux-yocto SRCREVs for feature backports:
6cfe9c448741 x86, kaslr: boot-time selectable with hibernation 881a5f5812fd x86, kaslr: fix module lock ordering problem 121ec40d905d x86, kaslr: randomize module base load address 6efd2d21273c x86, vdso: Add 32 bit VDSO time support for 64 bit kernel 642441e17072 x86, vdso: Add 32 bit VDSO time support for 32 bit kernel 1d8dd2e617d4 x86, vdso: Patch alternatives in the 32-bit VDSO 353f3eadb16d x86, vdso: Introduce VVAR marco for vdso32 5e6e6ec6eb5c x86, vdso: Cleanup __vdso_gettimeofday() 91efa61ed6c2 x86, vdso: Replace VVAR(vsyscall_gtod_data) by gtod macro f9c259ee1b2f x86, vdso: __vdso_clock_gettime() cleanup 63d9b1c4ec72 x86, vdso: Revamp vclock_gettime.c e3a8ed44c964 mm: Add new func _install_special_mapping() to mmap.c 02a67e32e58d x86, vdso: Make vsyscall_gtod_data handling x86 generic d076cfb68504 x86, vdso, xen: Remove stray reference to FIX_VDSO 949153696c99 x86_32, mm: Remove user bit from identity map PDE e5cf7dfec74d x86, vdso: Remove compat vdso support
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Wed, 20 Aug 2014 16:21:27 +0000 (12:21 -0400)]
linux-yocto/3.14: add ARM kprobes support
Adding the following commits to the 3.14 tree for ARM kprobe support:
c1750e55eb75 ARM: add uprobes support 33e8a1334afe ARM: Make arch_specific_insn a define for new arch_probes_insn structure b1d3feead083 ARM: Add an emulate flag to the kprobes/uprobes instruction decode functions 84b5b70a01a2 ARM: Change the remaining shared kprobes/uprobes symbols to something generic 624e5e9aab5a ARM: Rename the shared kprobes/uprobe return value enum 7741eac39c2e ARM: Change more ARM kprobes symbol names to something more generic 47f51bac6a2d ARM: Make the kprobes condition_check symbol names more generic 3af2f454bb8e ARM: Remove use of struct kprobe from generic probes code a31964d3143a ARM: use a function table for determining instruction interpreter action 6de77767abfc ARM: move generic thumb instruction parsing code to new files for use by other feature eb2db188b856 ARM: Move generic arm instruction parsing code to new files for sharing between features bbc0a43ff46e ARM: move shared uprobe/kprobe definitions into new include file f5f2896020e6 uprobes: allow ignoring of probe hits cb133db6bd60 ARM: Fix missing includes in kprobes sources
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Fri, 22 Aug 2014 08:31:27 +0000 (01:31 -0700)]
sanity.bbclass: check the format of MIRRORS
Check the format of MIRRORS, PREMIRRORS and SSTATE_MIRRORS:
* Each mirror shoudl contain two memebers.
* The local "file://" url must use absolute path (file:///).
* The protocol must in protocols list.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Fri, 22 Aug 2014 08:43:19 +0000 (01:43 -0700)]
sanity.bbclass/kernel.bbclass: minor fixes
Fixed:
- Remove an unused line
- Remove unneeded code after d.getVar(), we don't need the "or ''" after
d.getVar() unless we need a string.
- typo: PREMIRROS -> PREMIRRORS.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Peter Seebach [Wed, 20 Aug 2014 21:24:21 +0000 (16:24 -0500)]
libc-common.bbclass: rename ALL the packages
The DEBIAN_NAMES feature renames some of the libc packages to
"libc6*" names --but only some. A previous patch added the -dbg
package. However, this doesn't cover other packages (such as
the -doc package), and it didn't take multilibs into account.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Jeff Polk <jeff.polk@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chong Lu [Thu, 21 Aug 2014 01:27:13 +0000 (09:27 +0800)]
expect: fix shared object file cannot be opened
When we require Expect package in tcl script, we will get following error:
couldn't load file "/usr/lib/expect5.45/libexpect5.45.so": /usr/lib/expect5.45/libexpect5.45.so: cannot open shared object file: No such file or directory
while executing
"load /usr/lib/expect5.45/libexpect5.45.so"
("package ifneeded Expect 5.45" script)
invoked from within
"package require Expect"
(file "hello.tcl" line 3)
This patch fixes this issue.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 21 Aug 2014 20:46:28 +0000 (21:46 +0100)]
lib/oe/utils: Add utils function for multiprocess execution
Our usage of multitprocessing is problematic. In particular, there is a bug
in python 2.7 multiprocessing where signals are not handled until command
completion instead of immediately.
This factors the multiprocess code into a function which is enhanced with
a workaround to ensure immediate signal handling and also better SIGINT
handling which should happen in the parent, not the children to ensure
clean exits. The workaround for the signals is being added to the core
bb.utils function so it can benefit all users.
package_manager is then converted to use the new code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 19 Aug 2014 12:31:22 +0000 (13:31 +0100)]
bitbake.conf: Set PACKAGE_ARCH with ??=
Currently its near impossible for other classes to sanely override
this value with their own default. By setting a weak default we can
allow other classes to change the default and allow end recipes to
again override this.
As far as I can tell, there shouldn't be any regressions from this
change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 22 Aug 2014 17:21:41 +0000 (17:21 +0000)]
oeqa/utils/httpserver: Reset SIGTERM handler
With bitbake-worker installing a SIGTERM handler, we now need to reset the one here
to ensure that when this process shuts down, it doesn't take the rest of the task
with it. This does appear to be the only place in OE that we have this problem.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jian Liu [Wed, 20 Aug 2014 08:15:00 +0000 (16:15 +0800)]
archiver: delete the tail slash in directory name
If directory names in SRC_URI ended with "/", function
do_ar_original() in layers/oe-core/meta/classes/archiver.bbclass
will generate a tar file whose name is ".tar.gz".
So delete the "/" at the tail of the directory names before use the names.
Signed-off-by: Jian Liu <jian.liu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
populate-volatiles.sh does not create the directory or set
permissions, because it already exists:
Checking for -/var/volatile/tmp-.
Creating directory -/var/volatile/tmp-.
Target already exists. Skipping.
Traced the creation to the initfile in udev. Create with -m 1755
to be sure. With this patch applied, mysql postinst succeeds and
creates the neccesary user tables.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Mon, 18 Aug 2014 06:11:43 +0000 (23:11 -0700)]
apr: add bash to RDEPENDS_apr-dev
Bashsim in apr-dev/usr/share/build-1/libtool:
possible bashism in apr-dev/usr/share/build-1/libtool line 1004 ($RANDOM):
my_tmpdir="${my_template}-${RANDOM-0}$$"
possible bashism in apr-dev/usr/share/build-1/libtool line 3797 (should be '.', not 'source'):
dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
possible bashism in apr-dev/usr/share/build-1/libtool line 8237 (shopt):
test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
possible bashism in apr-dev/usr/share/build-1/libtool line 8240 (shopt):
shopt -s nocaseglob
possible bashism in apr-dev/usr/share/build-1/libtool line 9255 (should be VAR="${VAR}foo"):
rpath+=" $flag"
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Mon, 18 Aug 2014 06:24:03 +0000 (23:24 -0700)]
libtool: add bash to RDEPENDS_libtool
* Set CONFIG_SHELL="/bin/bash"
* Add bash to RDEPENDS_libtool
We had already set CONFIG_SHELL="/bin/bash" for libtool-native,
libtool-cross and nativesdk-libtool, now also set for target libtool, if
we don't set this, libtool would use /bin/sh, /bin/bash, /bin/ksh or
/bin/sh5 according to the host, and the build is undetermined, this
patch can fix the problem, libtool is a development tool, rdepends on
bash should not cause toubles (for example, the size of the image)
Have tried to set CONFIG_SHELL="/bin/sh" (/bin/sh -> dash), but there is
still a few bashsim in the output libtool.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"The ISC DHCP's dhclient-script for Linux still uses the legacy commands
'ifconfig' & 'route' to manage IPv4 network addresses & routes,
while it uses iproute2's new "ip" command to manage IPv6 network data.
This requires users & distributions to have both types of commands installed
The attached patch tries to improve the situation by replacing the
old "ifconfig" resp. "route" commands with their "ip" counterparts.
It even improves the logic a bit by only flushing the IPv4 addresses
instead of taking down the whole interface, which may still have active IPv6
connections."
Signed-off-by: Fahad Usman <fahad.usman@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yang Shi [Tue, 19 Aug 2014 21:21:41 +0000 (14:21 -0700)]
kernel: Prevent from installing so files into source dir
vdso build could generate so files, avoid installing such so files into kernel
source dir, otherwise the below package QA error might be hit:
ERROR: QA Issue: File '/usr/src/kernel/arch/x86/vdso/vdso64.so' from
linux-yocto was already stripped, this will prevent future
debugging! [already-stripped]
Signed-off-by: Yang Shi <yang.shi@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Maciej Borzecki [Tue, 19 Aug 2014 13:14:18 +0000 (15:14 +0200)]
wic: do not realign aligned partitions
The change prevents additional realignment of already aligned
partition. Previously, even already aligned partitions would be pushed
forward by the amount of --align.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Maciej Borzecki [Tue, 19 Aug 2014 13:14:17 +0000 (15:14 +0200)]
wic: do not steal sectors from the first partition
In order to make up for space loss due to overhead located before the
first partition, same amount of bytes was extracted from the first
partition's size. This leads to unexpected change of first partition's
size, and is not matched by similar adjustment at the time the partition
image is generated. Thus it is possible that the first partition may
partially overwrite contents of the following partition, as the
partition image is larger than the allocated space.
This is also problematic on certain platforms such as OMAP, where the
first partition is required for have an even number of
sectors (typically already expressed by --size in kickstart
file). Subtracting an odd number of sectors lost for overhead, leads to
an odd number of sectors assigned for partition, preventing the board,
such as beaglebone, from booting correctly.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Barker [Tue, 19 Aug 2014 18:52:17 +0000 (18:52 +0000)]
e2fsprogs: Backport fixes for building with musl
Both of these fixes have been applied upstream and improve general code
correctness. They are needed when building with TCLIBC=musl but shouldn't cause
any harm with other libc implementations.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 18 Aug 2014 14:21:54 +0000 (15:21 +0100)]
classes/sstate: ensure do_package_qa_setscene doesn't pull in do_package_setscene
If we have done do_package_qa_setscene we do not also need
do_package_setscene. This means we can again for example rebuild an image
without needing do_package sstate packages to be present.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Fri, 25 Jul 2014 13:15:38 +0000 (15:15 +0200)]
buildhistory: rename build-id to build-id.txt and add more info
* use .txt extension like other reports (e.g. image-info.txt) it's
also useful when looking at the file from web server which doesn't
have text/plain as default content-type
* include whole BUILDCFG_HEADER/BUILDCFG_FUNCS instead of just layer
info
* this makes it easier for distro to include more fields without the
need to modify buildhistory.bbclass
* currently it adds following fields:
Build Configuration:
BB_VERSION = "1.23.1"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Gentoo-2.2"
TARGET_SYS = "x86_64-oe-linux"
MACHINE = "qemux86-64"
DISTRO = "shr"
DISTRO_VERSION = "2013.07-next-20140725"
TUNE_FEATURES = "m64 core2"
TARGET_FPU = ""
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chong Lu [Mon, 18 Aug 2014 09:49:18 +0000 (17:49 +0800)]
librsvg: disable Bsymbolic if it is not supported on some hosts
When trying to build on my Centos 5.5 machine, got below error:
| checking for gdk-pixbuf-query-loaders... /home/build/clu1/build/qemux86_standard_glibc-std/bitbake_build/tmp/sysroots/x86_64-linux/usr/bin/gdk-pixbuf-query-loaders
| checking if gcc supports "-Wl,-Bsymbolic-functions" flag...
| configure: error: -Bsymbolic requested but not supported by ld. Use --disable-Bsymbolic to disable
| Configure failed. The contents of all config.log files follows to aid debugging
| ERROR: oe_runconf failed
Set --enable-Bsymbolic=auto to disable it when it is not suppported.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeqa/utils/targetbuild.py: add support for sdk tests
- Create new abstract class BuildProject that provides basic functionality for a project/package building class
* contains abstract method _run() that needs to be implemented by all extending classes.
- The old TargetBuildProject class now extends the abstract BuildProjct class
- Introducing new SDKBuildProject that extends the abstract BuildProjct class
NOTE: Original patch made by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
meta/classes/testimage.bbclass: add testsdk task and enable functionality for it.
- add new testsdk task for meta-toolchain testing.
- enable the get_tests_list method to work with sdk tests.
- add default TEST_SUITES value for meta-toolchain package
NOTE: Original patch made by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 16 Aug 2014 07:20:57 +0000 (08:20 +0100)]
crosssdk: Clear MACHINEOVERRIDES
Without this, things like arm* can make it into OVERRIDES when we're
building a compiler to build binaries for another architecture like
x86. This can can lead to build failures dependning on the
exact configuration and overrides.
Robert Yang [Sat, 16 Aug 2014 02:08:09 +0000 (19:08 -0700)]
avahi-ui: drop rmdir localstatedir in bb recipe
There is a "rmdir --ignore-fail-on-non-empty ${D}${localstatedir}" in
avahi.inc, so drop the one in avahi-ui_0.6.31.bb, otherwise do_install
error:
rmdir: failed to remove `/path/to/image/var': No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Fri, 15 Aug 2014 16:55:22 +0000 (17:55 +0100)]
avahi: unset FILES_avahi to avoid packaging files there
The main avahi recipe doesn't package anything into ${PN}. If a library is
enabled but not put into a separate package it ends up in ${PN} and all the
packages are renamed using it's soname - ie libdns-sd-daemon.
Avoid this by clearing FILES_avahi so extra files are unpackaged instead of
creating a new package. Also actually remove /var as the comments claim so the
avahi package is truly empty.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Fri, 15 Aug 2014 12:11:47 +0000 (13:11 +0100)]
lttng-tools: update to version 2.5.0
Update to latest stable-2.5 revision.
* Drop Fix-alignment-problems-on-targets-not-supporting-una.patch, merged
upstream.
* New build-dependency on libxml2, so inherit pkgconfig so the test works and
delete the copy of libxml.m4 that overrides our sysroot.
Based on a patch from Yasir-Khan <yasir_khan@mentor.com>.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
musl e.g. is configured to not use fixed-include
which is an improvement btw. but libgcc-initial configure
has tests which probe for limits.h and since we put
it in include-fixed/ dir and that dir does not appear
in gcc's internal default search path the configure tests
for CPP detection fail and libgcc-initial can not be compiled.
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 14 Aug 2014 22:08:05 +0000 (23:08 +0100)]
lttng-ust/lttng-modules: Update LICENSE to reflect MIT
The code in question clearly states MIT is a third license. Update
LICENSE to reflect this (in one case, we did list BSD which is effectively
the same thing but this removes confusion).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Gary Thomas [Mon, 11 Aug 2014 20:50:35 +0000 (14:50 -0600)]
toolchain-shar-template.sh: Limit xargs command line
It's possible to generate a command line in the relocate_sdk.sh script
which is too long (long paths, many files). This change limits the
xargs command line by breaking it up into smaller pieces.
One necessary side effect is that the -0 option is no longer used as it
doesn't seem to work properly with -n, so the file name arguments are
now quoted explicitly rather than \0 terminated.
Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Mon, 11 Aug 2014 20:21:44 +0000 (17:21 -0300)]
libpam: Allow use during build and in SDK
The recipe had libpam hardcoded in some places which were causing
failures as the metadata renaming hooks does not change those,
generating a broken dependencies list.
This patch fixes those and add the native and nativesdk support.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
