Richard Purdie [Wed, 3 Apr 2019 17:02:41 +0000 (18:02 +0100)]
core-image-sato-sdk-ptest: Fix free space issues causing test failures
Some tests such as strace-ptest require more than the current 500MB of free
space. Increase the amount available, staying under the 4GB limit. We have more
flexibility now since we shrank kernel-devsrc and the comments are out of date
due to that.
This should improve the strace-ptest results and the util-linux ones since
those sort after strace and also hit the space issues as strace-ptest didn't
clean up after itself when failing.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Current validation check function inside resulttool disallow the
report for single result file although the underlying library
was able to handle both directory and file as source input to report.
Removed the validation check as it was no longer needed and to
enable report for single result file.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Kai Kang [Tue, 2 Apr 2019 07:44:26 +0000 (03:44 -0400)]
avahi: fix CVE-2017-6519
Backport patch to fix CVE-2017-6519.
CVE: CVE-2017-6519
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
David Frey [Thu, 10 Jan 2019 19:23:52 +0000 (11:23 -0800)]
bluez5: Fix status subcommand of init script
Update the bluez5 init script to resolve an issue where the status
subcommand would exit without printing any message if bluez was not
running. The early exit was caused by the fact that the init script has
"set -e". When "pidof ${DAEMON} >/dev/null" is executed, the script
terminates immediately if bluez isn't running because pidof returns a
non-zero result. The fixed version does not suffer from this issue and
makes use of the "status" function from the functions library.
Signed-off-by: David Frey <dpfrey@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Peter A. Bigot [Tue, 13 Nov 2018 18:06:20 +0000 (12:06 -0600)]
bluez5: add mesh dependency on ell
Introduced at or before 5.50.
Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Taras Kondratiuk [Fri, 22 Mar 2019 00:56:59 +0000 (17:56 -0700)]
devtool: prevent starting git gc in background
Devtool creates a git repository for extracted sources in a temporary
directory and then moves it to a final destination after patching is
done. Unfortunately devtool is not aware that some of its git operations
may have caused git garbage collector to start in background. If timing
is just right a repository move fails because GC is removing git objects
while they are being moved.
The issue was hit on Krogoth release, but the code that moves created
git repository is still the same.
Disable gc.autodetach to make GC run synchronously and block git until
it is done.
Traceback (most recent call last):
File "<snip>/openembedded-core/scripts/devtool", line 342, in <module>
ret = main()
File "<snip>/openembedded-core/scripts/devtool", line 329, in main
ret = args.func(args, config, basepath, workspace)
File "<snip>/openembedded-core/scripts/lib/devtool/standard.py", line 352, in extract
initial_rev = _extract_source(srctree, args.keep_temp, args.branch, False, rd)
File "<snip>/openembedded-core/scripts/lib/devtool/standard.py", line 644, in _extract_source
shutil.move(srcsubdir, srctree)
File "/usr/lib/python2.7/shutil.py", line 299, in move
copytree(src, real_dst, symlinks=True)
File "/usr/lib/python2.7/shutil.py", line 208, in copytree
raise Error, errors
Error: [('/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/5e', '<snip>/build/grpc/grpc_src/.git/objects/5e', "[Errno 2] No such file or directory: '/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/5e'"), ('/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/57', '<snip>/build/grpc/grpc_src/.git/objects/57', "[Errno 2] No such file or directory: '/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/57'"), many git objects ... ]
Changqing Li [Thu, 25 Oct 2018 08:59:28 +0000 (16:59 +0800)]
python-native: fix one do_populate_sysroot warning
Fix below warning:
WARNING: Skipping RPATH /usr/lib64 as is a standard search path for
work/x86_64-linux/python-native/2.7.15-r1.1/recipe-sysroot-native/
usr/lib/python2.7/lib-dynload/_bsddb.so
setup.py will check db.h under include_dirs, for native build,
/usr/lib64 will be insert to postion 0 of include_dirs, so
it's priority is higher then our sysroot, cause db.h sysroot
is ignored, and rpath set to /usr/lib64. and this cause warning
when do_populate_sysroot. use append to fix it.
Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Aditya Tayade [Mon, 25 Mar 2019 15:27:11 +0000 (15:27 +0000)]
run-ptest: use error handling for useradd and userdel
Error handling in shell scripts is too easy to forget and
get wrong. It is possible to check every external command
for return values but it is better to use a generic setting
which halts execution of the script on any failures.
Ross Burton [Tue, 26 Mar 2019 12:02:27 +0000 (12:02 +0000)]
zlib: clean up ptest
Instead of patching and sedding the makefile, just install test/example and
execute it in run-ptest. example is the bulk of the test suite, as minimal as
it is.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Robert Yang [Mon, 11 Mar 2019 10:16:55 +0000 (18:16 +0800)]
oe-init-build-env: Error out when failed to locate cwd
Ubuntu's /bin/sh symlinks to /bin/dash by default, so
subprocess.check_call(oe-init-build-env, cwd=builddir) would be failed since
pwd is builddir, and there is no $builddir/oe-init-build-env, this would
lead to other confusing errors, check and error it out earlier to make it
easier to locate the problem.
We don't meet the problem when manually run ". oe-init-build-env" is because
Ubuntu's default login shell is bash, but subprocess.check_call() doesn't
respect to login shell, so the error only happens in situations like
subprocess.check_call().
And also print errors to stderr as oe-buildenv-internal does.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Armin Kuster [Tue, 26 Mar 2019 16:13:11 +0000 (09:13 -0700)]
timezone: update to 2019a
The 2019a release of the tz code and data is available. It reflects the following changes, which were either circulated on the tz mailing list or are relatively minor technical or administrative changes:
Briefly:
Palestine "springs forward" on 2019-03-30 instead of 2019-03-23.
Metlakatla "fell back" to rejoin Alaska Time on 2019-01-20 at 02:00.
Changes to past and future timestamps
Palestine will not start DST until 2019-03-30, instead of 2019-03-23 as
previously predicted. Adjust our prediction by guessing that spring
transitions will be between 24 and 30 March, which matches recent practice
since 2016. (Thanks to Even Scharning and Tim Parenti.)
Metlakatla ended its observance of Pacific standard time,
rejoining Alaska Time, on 2019-01-20 at 02:00. (Thanks to Ryan
Stanley and Tim Parenti.)
Changes to past timestamps
Israel observed DST in 1980 (08-02/09-13) and 1984 (05-05/08-25).
(Thanks to Alois Treindl and Isaac Starkman.)
Changes to time zone abbreviations
Etc/UCT is now a backward-compatibility link to Etc/UTC, instead
of being a separate zone that generates the abbreviation "UCT",
which nowadays is typically a typo. (Problem reported by Isiah
Meadows.)
Changes to code
zic now has an -r option to limit the time range of output data.
For example, 'zic -r @1000000000' limits the output data to
timestamps starting 1000000000 seconds after the Epoch.
This helps shrink output size and can be useful for applications
not needing the full timestamp history, such as TZDIST truncation;
see Internet RFC 8536 section 5.1. (Inspired by a feature request
from Christopher Wong, helped along by bug reports from Wong and
from Tim Parenti.)
Changes to documentation
Mention Internet RFC 8536 (February 2019), which documents TZif.
tz-link.html now cites tzdata-meta
<https://tzdata-meta.timtimeonline.com/>.
Ross Burton [Thu, 22 Nov 2018 14:05:16 +0000 (14:05 +0000)]
openssl: don't disable the AFALG engine based on host kernel
Whether the AFALG engine (use of hardware crypto via AF_ALG) is enable or
disable depends on whether the host kernel is 4.1 or above, which has no bearing
on whether the target system supports it.
Remove the complicated logic and simply enable/disable as requested.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Ovidiu Panait [Mon, 4 Mar 2019 11:38:45 +0000 (13:38 +0200)]
openssl: Add cryptodev-linux PACKAGECONFIG
The old bsd cryptodev engine was removed in
https://github.com/openssl/openssl/pull/3699
and the new one added in:
https://github.com/openssl/openssl/pull/3744
It can be enabled by configuring with "enable-devcryptoeng".
Khem Raj [Wed, 13 Mar 2019 15:25:58 +0000 (15:25 +0000)]
glibc: Drop upstream rejected patches
These patches were applied, hoping that they will eventually be accepted
upstream but they have been rejected, I think its best that they are
dropped so we can avoid novel unintended behaviours that no other
distros will be seeing
Chen Qi [Wed, 30 Jan 2019 02:56:24 +0000 (10:56 +0800)]
pkgdata.py: avoid target-sdk-dummy-provides to mess things up
Sometimes we meet the following failure for the test_lookup_recipe
test case.
AssertionError: 'zlib\nbusybox is in the RPROVIDES of target-sdk-provid[32 chars]ummy' != 'zlib\nbusybox'
zlib
+ busybox- busybox is in the RPROVIDES of target-sdk-provides-dummy:
- target-sdk-provides-dummy
This is because target-sdk-provides-dummy rprovides busybox.
resulttool/manualexecution: Fixed step sorted by integer
Currently the manual execution display step by sorting
the step as string, where steps were not being sorted
correctly when there are more than 9 steps.
Fixed the step sorting by sorting step as integer.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
resulttool/manualexecution: Enable display full steps without press enter
Current manualexecution required pressing enter button to show each step
information, where this was wasting execution time. Enable display
full steps without needing to any press enter button.
Signed-off-by: Mazliana <mazliana.mohamad@intel.com> Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Current input checking does not match the standard input practiced
by QA team. Change the input checking to match the standard
input practiced by the QA team.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Richard Purdie [Sat, 2 Mar 2019 16:34:16 +0000 (16:34 +0000)]
resulttool: Allow extraction of ptest data
Rather than simply discarding the ptest data, change the code to discard
it when writing out the new testresult files, or optionally either preserve
it, or write it as seperate discrete logs.
This means the autobuilder should start writing out individual ptest log
files as well as allowing ueers to extract these manually.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Richard Purdie [Tue, 2 Apr 2019 22:51:02 +0000 (23:51 +0100)]
resulttool: Allow store to work on single files
Store operations using a single file as a source weren't working as the os.walk
command didn't like being given a single file. Fix the store operation to
work for single files.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Yeoh Ee Peng [Tue, 19 Mar 2019 01:53:53 +0000 (09:53 +0800)]
oeqa/manual/toaster: updated test id naming
All test id (eg. @alias) inside manual testcase file shall follow the same
test id naming convention from oeqa automated tests (eg. selftest,
runtime, sdk, etc), where the test id consists of
<test_module>.<test_suite>.<test_function>. Furthermore, there shall be
only 1 unique test_module per each manual testcases file, where
test_module match the file name itself.
This file was using test_module name that does not match the file name
itself. Fixed test_module name as well as the test_suite name.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Yeoh Ee Peng [Fri, 28 Dec 2018 06:54:44 +0000 (14:54 +0800)]
oeqa/manual/toaster: transfer manual toaster test cases to oeqa
As part of the solution to replace Testopia, manual test cases
need to be migrated to OEQA. These manual test case json files
will serve two use cases.
Use case#1: as input to the future commandline-based manual test
runner script, where this script will display actions and expected
result information in user friendly text, then it will capture
user input for test result and log, finally it will write test
result and log into existing standardize test result json format
from OEQA framework for automated tests.
Use case#2: QA will open and read these json file manually for
planning manual test execution. Any reader interested in
understanding manual test cases will open and read these files.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
sangeeta jain [Thu, 14 Mar 2019 05:14:18 +0000 (13:14 +0800)]
oeqa/manual/kernel-dev.json: test id updated
All test id (eg. @alias) inside manual testcase file shall follow the same test id
naming convention from oeqa automated tests (eg. selftest, runtime, sdk, etc), where
the test id consists of <test_module>.<test_suite>.<test_function>. Furthermore,
there shall be only 1 unique test_module per each manual testcases file.
This file was using more than 1 unique test_module for testcases. Furthermore,
some of the testcases were defined using different test_suite where it was not needed.
This patch fix the manual testcases file to have only 1 unique test_module
as well as test_suite to simplify test id naming.
sangeeta jain [Thu, 14 Mar 2019 04:31:17 +0000 (12:31 +0800)]
oeqa/manual/compliance-test.json: test id updated and missing test cases added
Two changes made in oeqa/manual/compliance-test.json:
1. All test id (eg. @alias) inside manual testcase file shall follow the same test id
naming convention from oeqa automated tests (eg. selftest, runtime, sdk, etc), where
the test id consists of <test_module>.<test_suite>.<test_function>. Furthermore,
there shall be only 1 unique test_module per each manual testcases file.
This file was using more than 1 unique test_module for testcases. Furthermore, some of
the testcases were defined using different test_suite where it was not needed. This patch
fix the manual testcases file to have only 1 unique test_module as well as test_suite to
simplify test id naming.
2. Added 2 missing test cases for Beaglebone Stress Test.
sangeeta jain [Thu, 14 Mar 2019 02:55:23 +0000 (10:55 +0800)]
oeqa/manual/bsp-hw.json: test id updated and obsolete test cases removed
Two changes made in oeqa/manual/bsp-hw.json:
1. All test id (eg. @alias) inside manual testcase file shall follow the same test id naming
convention from oeqa automated tests (eg. selftest, runtime, sdk, etc), where the
test id consists of <test_module>.<test_suite>.<test_function>. Furthermore,
there shall be only 1 unique test_module per each manual testcases file.
This file was using more than 1 unique test_module for testcases.
Furthermore, some of the testcases were defined using different test_suite where it was not
needed. This patch fix the manual testcases file to have only 1 unique
test_module as well as test_suite to simplify test id naming.
2. As per review by Intel and Windriver team, 7 testcases were found obsolete. Removed 7 testcases.
sangeeta jain [Mon, 28 Jan 2019 08:11:15 +0000 (16:11 +0800)]
oeqa/manual/sdk.json: Updated toolchain tarball to core-image-sato
Manual test step for SDK is updated. Previously toolchain was "poky-glibc-x86_64-core-image-sato-sdk<type-arch>-toolchain-<release-version>.sh"
But toochain for core-image-sato-sdk is not available in releases after 2.1, hence changed it to "poky-glibc-x86_64-core-image-sato-<type-arch>-toolchain-<release-version>.sh
Other less significant update is to add exepcted result in intermediate test steps.
Richard Purdie [Thu, 28 Feb 2019 12:24:49 +0000 (12:24 +0000)]
scripts/wic: Be consistent about how we call bitbake
Whilst its tempting to call bitbake_main(), the script also directly executes
bitbake. By doing both this creates all kinds of races. Therefore
change to use subprocess execution in all cases.
Mazliana [Mon, 11 Mar 2019 08:30:33 +0000 (16:30 +0800)]
resulttool/manualexecution: To output right test case id
We found that manualexecution does not capture test suite values
correctly if there are more than one test suite in test cases.
After verification has made we found out we should retrieved
full test cases value <test_module.test_suite.test_case> from
oeqa/manual/ json file rather than split it them into new
variables test_suite and test_cases.
Signed-off-by: Mazliana <mazliana.mohamad@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yeoh Ee Peng [Thu, 7 Mar 2019 04:49:08 +0000 (12:49 +0800)]
scripts/resulttool: Enable manual result store and regression
To enable store for testresults.json file from manualexecution,
add layers metadata to configuration and add "manual" map to
resultutils.store_map.
To enable regression for manual, add "manual" map to
resultutils.regression_map. Also added compulsory configurations
('MACHINE', 'IMAGE_BASENAME') to manualexecution.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 27 Feb 2019 17:05:29 +0000 (17:05 +0000)]
resulttool/report: Ensure test suites with no results show up on the report
ptest suites with no results don't show up on the reports even though we have
a duration for them. Fix this so the fact they report no tests is visible.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 16 Feb 2019 18:13:00 +0000 (18:13 +0000)]
resulttool: Improvements to allow integration to the autobuilder
This is a combined patch of the various tweaks and improvements I
made to resulttool:
* Avoid subprocess.run() as its a python 3.6 feature and we
have autobuilder workers with 3.5.
* Avoid python keywords as variable names
* Simplify dict accesses using .get()
* Rename resultsutils -> resultutils to match the resultstool ->
resulttool rename
* Formalised the handling of "file_name" to "TESTSERIES" which the code
will now add into the json configuration data if its not present, based
on the directory name.
* When we don't have failed test cases, print something saying so
instead of an empty table
* Tweak the table headers in the report to be more readable (reference
"Test Series" instead if file_id and ID instead of results_id)
* Improve/simplify the max string length handling
* Merge the counts and percentage data into one table in the report
since printing two reports of the same data confuses the user
* Removed the confusing header in the regression report
* Show matches, then regressions, then unmatched runs in the regression
report, also remove chatting unneeded output
* Try harder to "pair" up matching configurations to reduce noise in
the regressions report
* Abstracted the "mapping" table concept used to pairing in the
regression code to general code in resultutils
* Created multiple mappings for results analysis, results storage and
'flattening' results data in a merge
* Simplify the merge command to take a source and a destination,
letting the destination be a directory or a file, removing the need for
an output directory parameter
* Add the 'IMAGE_PKGTYPE' and 'DISTRO' config options to the regression
mappings
* Have the store command place the testresults files in a layout from
the mapping, making commits into the git repo for results storage more
useful for simple comparison purposes
* Set the oe-git-archive tag format appropriately for oeqa results
storage (and simplify the commit messages closer to their defaults)
* Fix oe-git-archive to use the commit/branch data from the results file
* Cleaned up the command option help to match other changes
* Follow the model of git branch/tag processing used by oe-build-perf-report
and use that to read the data using git show to avoid branch change
* Add ptest summary to the report command
* Update the tests to match the above changes
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mazliana [Thu, 14 Feb 2019 05:50:38 +0000 (13:50 +0800)]
scripts/resulttool: enable manual execution and result creation
Integrated “manualexecution” operation to resulttool scripts.
Manual execution script is a helper script to execute all manual
test cases in baseline command, which consists of user guideline
steps and the expected results. The last step will ask user to
provide their input to execute result. The input options are
passed/failed/blocked/skipped status. The result given will be
written in testresults.json including log error from the user
input and configuration if there is any.The output test result
for json file is created by using OEQA library.
The configuration part is manually key-in by the user. The system
allow user to specify how many configuration they want to add and
they need to define the required configuration name and value pair.
In QA perspective, "configuration" means the test environments and
parameters used during QA setup before testing can be carry out.
Example of configurations: image used for boot up, host machine
distro used, poky configurations, etc.
The purpose of adding the configuration is to standardize the
output test result format between automation and manual execution.
To use these scripts, first source oe environment, then run the
entry point script to look for help.
$ resulttool
To execute manual test cases, execute the below
$ resulttool manualexecution <manualjsonfile>
By default testresults.json store in <build_dir>/tmp/log/manual/
[YOCTO #12651]
Signed-off-by: Mazliana <mazliana.mohamad@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yeoh Ee Peng [Thu, 14 Feb 2019 05:50:37 +0000 (13:50 +0800)]
resulttool: enable merge, store, report and regression analysis
OEQA outputs test results into json files and these files were
archived by Autobuilder during QA releases. Example: each oe-selftest
run by Autobuilder for different host distro generate a
testresults.json file.
These scripts were developed as a test result tools to manage
these testresults.json file.
Using the "store" operation, user can store multiple testresults.json
files as well as the pre-configured directories used to hold those files.
Using the "merge" operation, user can merge multiple testresults.json
files to a target file.
Using the "report" operation, user can view the test result summary
for all available testresults.json files inside a ordinary directory
or a git repository.
Using the "regression-file" operation, user can perform regression
analysis on testresults.json files specified. Using the "regression-dir"
and "regression-git" operations, user can perform regression analysis
on directory and git accordingly.
These resulttool operations expect the testresults.json file to use
the json format below.
{
"<testresult_1>": {
"configuration": {
"<config_name_1>": "<config_value_1>",
"<config_name_2>": "<config_value_2>",
...
"<config_name_n>": "<config_value_n>",
},
"result": {
"<testcase_namespace_1>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
"<testcase_namespace_2>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
...
"<testcase_namespace_n>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
}
},
...
"<testresult_n>": {
"configuration": {
"<config_name_1>": "<config_value_1>",
"<config_name_2>": "<config_value_2>",
...
"<config_name_n>": "<config_value_n>",
},
"result": {
"<testcase_namespace_1>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
"<testcase_namespace_2>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
...
"<testcase_namespace_n>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
}
},
}
To use these scripts, first source oe environment, then run the
entry point script to look for help.
$ resulttool
To store test result from oeqa automated tests, execute the below
$ resulttool store <source_dir> <git_branch>
To merge multiple testresults.json files, execute the below
$ resulttool merge <base_result_file> <target_result_file>
To report test report, execute the below
$ resulttool report <source_dir>
To perform regression file analysis, execute the below
$ resulttool regression-file <base_result_file> <target_result_file>
To perform regression dir analysis, execute the below
$ resulttool regression-dir <base_result_dir> <target_result_dir>
To perform regression git analysis, execute the below
$ resulttool regression-git <source_dir> <base_branch> <target_branch>
[YOCTO# 13012]
[YOCTO# 12654]
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Thu, 10 Jan 2019 02:37:32 +0000 (10:37 +0800)]
target-sdk-provides-dummy: add more perl modules to avoid populate_sdk failure
When 'adduser' package, which is from meta-perl layer, is added to rootfs,
we will get do_populate_sdk failure like below.
Error:
Problem: package perl-module-cwd-5.24.4-r0.core2_64 requires perl-module-dynaloader, but none of the providers can be installed
- package perl-module-file-temp-5.24.4-r0.core2_64 requires perl-module-cwd, but none of the providers can be installed
- package perl-module-dynaloader-5.24.4-r0.core2_64 requires perl-module-config, but none of the providers can be installed
- package adduser-3.118-r0.core2_64 requires perl-module-file-temp, but none of the providers can be installed
- package target-sdk-provides-dummy-1.0-r0.sdk_provides_dummy_target conflicts with perl provided by perl-5.24.4-r0.core2_64
This is because adduser depends on some perl modules which are not
listed in target-sdk-provides-dummy.
Signed-off-by: Ming Liu <liu.ming50@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Robert Yang [Tue, 5 Mar 2019 03:30:35 +0000 (11:30 +0800)]
send-error-report: Add --no-ssl to use http protocol
The script use https protocol by default, but the error-report-web server's
https connection may not work (e.g., doesn't work with python 2.7.6), so add an
option --no-ssl to make it use http.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Richard Purdie [Thu, 21 Feb 2019 16:00:02 +0000 (16:00 +0000)]
kernel: Ensure an initramfs is added if configured
If ${DEPLOY_DIR_IMAGE}/${INITRAMFS_IMAGE_NAME}.cpio does not exist,
nor any of the compressed variants, nothing is copied to kernel build's
./usr directory.
The code does not fail, but silently proceeds without a bundled initramfs.
Change to fail and tell the user something is wrong.
Also, if an initramfs is found, contrary to the comments, it does not stop
at the first uncompressed/compressed cpio image found. Instead it keeps
processing all so the last is used. Fix this to behave as per the comments.
Apply patches from systemd_239-7ubuntu10.8 to fix CVE-2019-6454.
CVE-2019-6454 is an issue in which systemd (PID1) can be crashed with a
specially formed D-Bus message.
Richard Purdie [Mon, 28 Jan 2019 13:57:44 +0000 (13:57 +0000)]
systemd: Update recent CVE patches
* Added CVE tag, Upstream-Status tag and Sign-off-by tags.
* Removed the verification of the entry length in the header
* Squashed CVE-2018-16865 patches into one
* CVE-2018-16866 patch now taken from systemd-stable and includes
an additional heap buffer overflow fix.
Signed-off-by: Marcus Cooper <marcusc@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Richard Purdie [Sat, 9 Mar 2019 18:50:07 +0000 (19:50 +0100)]
target-sdk-provides-dummy: Extend to -dev and -src packages
This avoids errors when running populate_sdk under opkg:
* Problem 1/1:
* - package busybox-dev-1.30.1-r0.core2-64 requires busybox = 1.30.1-r0, but none of the providers can be installed
*
* Solution 1:
* - allow deinstallation of target-sdk-provides-dummy-1.0-r0.sdk-provides-dummy-target
* Solution 2:
* - do not ask to install a package providing busybox-dev
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 33d2cde3be4d25389cbea07064ffbc7b2f74273e) Signed-off-by: Armin Kuster <akuster808@gmail.com>
André Draszik [Thu, 7 Mar 2019 14:27:09 +0000 (16:27 +0200)]
systemd: RDEPENDS on util-linux-umount
It looks like there is an implicit dependency on util-linux'
umount - as otherwise when using busybox' umount we see a
long delay on shutdown / reboot.
openssl10: Fix mutliple include assumptions for des.h in opensslconf.h
The fix is heavily based on Khem's previous fix for bn.h/BN_LLONG breakage:
https://git.openembedded.org/openembedded-core/commit/?id=f787b0bb9b0626ddbf2ac94cb206c76716a3773d
Richard Purdie [Sun, 17 Feb 2019 22:12:40 +0000 (22:12 +0000)]
scripts/oe-git-archive: Separate out functionality to library function
This turns the core of the script into a library function. Ultimately this
will let us call that code with custom 'keywords' rather than relying
on the data parsed from bitbake metadata which can't be used when archiving
historical results.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Robert Yang [Fri, 15 Feb 2019 08:14:51 +0000 (16:14 +0800)]
runqemu: Let qemuparams override default settings
Fixed:
In meta/conf/machine/include/qemuboot-x86.inc:
QB_CPU_x86-64 = "-cpu core2duo"
$ runqemu qemux86-64 qemuparams="-cpu coreduo"
Check /proc/cpuinfo, it should use coreduo rather than core2duo since user
specifies it, but it doesn't, append qemuparams to the last can fix the
problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
OE-Core rev: a88bcbae850a2e6d182291d3f8e167aabdbe4842 broke the ability
to find parted as it may be in sbin which is not in PATH for some users
on some distros.
Iterate on the original patch to fix this and also fix the original problem.
William Bourque [Mon, 11 Feb 2019 20:00:48 +0000 (15:00 -0500)]
wic/engine.py: Load paths from PATH environment variable
Load self.paths from environment variable and
if it fails, fall back to hardcoded list.
This is required for users that would need to load
different e2fsprogs binaries if their system's ones
are not recent enought
scripts/lib/wic/engine: Fix cp's target path for ext* filesystems
Python subprocess' shell=True defaults to /bin/sh[1][2], which
often refers to a POSIX-compliant shell. As the -e flag is
not defined in the POSIX standard[3], some shells may
interpret "-e" as the first argument to the echo command,
causing the rest of the command line to fail.
In this particular case, "echo -e 'cd {}'" is interpreted
as "-e cd {}", which causes the first line of the command
to fail, and causing cp to always place the source file
in the filesystem's root.
Replacing "echo -e" for a printf command makes this
more portable.
This issue only affects "wic cp" for ext* filesystems.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Changqing Li [Thu, 15 Nov 2018 08:16:55 +0000 (16:16 +0800)]
checklayer: generate locked-sigs.inc under builddir
yocto-check-layer will find locked-sigs.inc under builddir,
but locked-sigs.inc is generated under current bitbake working
dir. if run yocto-check-layer outside builddir, we will met error
like "No such file or directory: *locked-sigs.inc". change to
run bitbake -S under builddir to fix this problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
When comparing branches, correctly filter the revisions corresponding
to the specific branch specified.
Also use the commit numbers as a way to gauge spatially related commits
for comparision meaning comparisions for out of order build revisions
becomes meaninful.
This should improve the reporting for autobuilder generated builds.
Richard Purdie [Fri, 8 Feb 2019 13:38:22 +0000 (13:38 +0000)]
oe-build-perf-report: Allow commits from different branches
The code won't currently allow comparisions of two commits on different
branches even if the commits are specified by their hashes.
This updates the code to search two branches for any relavent commits,
hence allowing comparisions to be made. A particularly useful case is
master vs. master-next for example.
Richard Purdie [Fri, 8 Feb 2019 13:37:06 +0000 (13:37 +0000)]
oe-build-perf-report: Allow branch without hostname
Allow the branch to be set without the hostname option. Previously
if hostname wasn't set, branch would be overwritten regardless of
whether it was set or not.
