Bruce Ashfield [Mon, 21 Aug 2017 02:58:20 +0000 (22:58 -0400)]
qemu: bump default version to 4.12
Not all the qemu machines carry default kernel specifications.
While we could drop these references, we'll bump them to 4.12
to pick up the latest and remove them in future commits.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 22 Aug 2017 16:00:14 +0000 (12:00 -0400)]
linux-yocto: introduce 4.12 recipes
The 4.12 kernel will be the default/reference for the fall 2017
release.
These recipes represent the introduction of 4.12.7 + related kernel
meta data. Existing functionality has been validated against this
new kernel version, and older versions will be removed in separate
commits.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Mon, 21 Aug 2017 02:58:15 +0000 (22:58 -0400)]
linux-yocto/4.1: fix fsl-ls10xx sdhci
mmc: sdhci: fix two compile errors
| CC drivers/mmc/host/sdhci.o
| drivers/mmc/host/sdhci.c: In function 'sdhci_execute_tuning':
| drivers/mmc/host/sdhci.c:1990:4: error: implicit
| declaration of function 'sdhci_do_reset'
| [-Werror=implicit-function-declaration]
| sdhci_do_reset(host, SDHCI_RESET_CMD);
| ^
| drivers/mmc/host/sdhci.c:2006:7: error: 'struct
| mmc_command' has no member named 'busy_timeout'
| cmd.busy_timeout = 50;
| ^
In function sdhci_execute_tuning, replace sdhci_do_reset
with sdhci_reset, replace busy_timeout with cmd_timeout_ms.
Commit a629a90ba0 adds eMMC DDR mode support for t2080qds and
modified some data structures and function name. Later
commit a2080cc280 just backport upstream commit 61e53bd004
without aligning the current source tree thus cause
these build errors. Fix them.
Signed-off-by: Zhang Xiao <xiao.zhang@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joe Slater [Tue, 22 Aug 2017 21:14:46 +0000 (14:14 -0700)]
ghostscript: CVE-2017-9727, -9835, -11714
CVE-2017-9727: make bounds check in gx_ttfReader__Read more robust
CVE-2017-9835: bounds check the array allocations methods
CVE-2017-11714: prevent trying to reloc a freed object
Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Tue, 22 Aug 2017 22:10:20 +0000 (00:10 +0200)]
grub2: fix build on gcc where _FORTIFY_SOURCE is defined
* e.g. with gentoo gcc-7.1 they define _FORTIFY_SOURCE by default with:
https://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo/src/patchsets/gcc/7.1.0/gentoo/10_all_default-fortify-source.patch?view=markup
which results in following error while building grub-efi-native:
./config-util.h:1504:48: error: this use of "defined" may not be portable [-Werror=expansion-to-defined]
|| (defined _FORTIFY_SOURCE && 0 < _FORTIFY_SOURCE \
^~~~~~~~~~~~~~~
this part comes from gnulib and it's used only for Apple and BSD,
so we can ignore it, but we cannot add -Wno-error=expansion-to-defined
because this warning was introduced only in gcc-7 and older gcc
will fail with:
cc1: error: -Werror=expansion-to-defined: no option -Wexpansion-to-defined
use #pragma to work around this
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ruslan Bilovol [Tue, 22 Aug 2017 11:06:40 +0000 (14:06 +0300)]
machine-sdk: oldest kernel for x86/x86_64 is 3.2.0 now
With glibc upgrade to 2.26 release (commit d6a0bc57fa07
"glibc: Upgrade to 2.26 final release") it's not possible
to build x86/x86_64 SDK for kernels lower than 3.2.0
(see glibc commit 139ace95756a "Require Linux kernel 3.2
or later on x86 / x86_64.")
Thus drop SDK_OLDEST_KERNEL overrides from machine-specific
conf files, so default version 3.2.0 from conf/bitbake.conf
will be picked up.
Signed-off-by: Ruslan Bilovol <rbilovol@cisco.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Mon, 21 Aug 2017 20:56:59 +0000 (22:56 +0200)]
libcheck: fix file-rdeps QA issue
* Fixes:
ERROR: nativesdk-libcheck-0.10.0-r0 do_package_qa: QA Issue: /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/usr/bin/checkmk contained in package nativesdk-libcheck requires /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/usr/bin/gawk, but no providers found in RDEPENDS_nativesdk-libcheck? [file-rdeps]
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Aníbal Limón [Tue, 22 Aug 2017 17:20:39 +0000 (12:20 -0500)]
apt: Upgrade to 1.2.24
Add new patches for enable builds on hosts that has GCC version
minor than 5 because doesn't support std::array and std::put_time,
those patches could be removed after get rid of Debian8 and Centos7
support.
Patches related to move ostable/triplettable insida data/ostable and
data/tupletable instead also needs to comply the new format of the
tables for arch detection.
Robert Yang [Mon, 21 Aug 2017 08:00:41 +0000 (01:00 -0700)]
strace: 4.17 -> 4.18
- Updated update-gawk-paths.patch.
- Updated Makefile-ptest.patch
- Removed 0008-replace-struct-ucontext-with-ucontext_t.patch which is already in
the source.
- The LIC_FILES_CHKSUM is changed because the years have been updated,
the contents are the same.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Mon, 21 Aug 2017 08:00:40 +0000 (01:00 -0700)]
e2fsprogs: 1.43.4 -> 1.43.5
Removed the following 2 patches which are already in the source:
- 0001-e2fsck-exit-with-exit-status-0-if-no-errors-were-fix.patch
- e2fsprogs-1.43-sysmacros.patch
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Hundebøll [Mon, 21 Aug 2017 09:21:34 +0000 (11:21 +0200)]
kernel-module-split: rrecommend kernel-image instead of rdepend
Hard depending on the kernel makes it impossible to install kernel
modules without getting the kernel image installed too. This is
inconvenient in e.g. initramdisks, where the kernel is loaded from
outside the initramdisk.
Making the kernel modules rrecommend kernel-image-<version> instead of
rdepending on it, makes it possible to install kernel modules without
the kernel image by setting "kernel-image" in BAD_RECOMMENDATIONS.
Signed-off-by: Martin Hundebøll <mnhu@prevas.dk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sona Sarmadi [Mon, 21 Aug 2017 12:05:34 +0000 (14:05 +0200)]
connman: Fix for CVE-2017-12865
dnsproxy: Fix crash on malformed DNS response
If the response query string is malformed, we might access memory
pass the end of "name" variable in parse_response().
[YOCTO #11959]
Signed-off-by: Sona Sarmadi <sona.sarmadi@enea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The upstream install gpg by default and no gpg2
...
commit a69464b0b6dac88b360a13d3faf19dd7f2a0e02b
Author: Werner Koch <wk@gnupg.org>
Date: Sat Aug 5 14:39:32 2017 +0200
gpg: Install gpg by default under the name gpg.
...
Add --enable-gpg-is-gpg2 to revert it.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 21 Aug 2017 05:39:49 +0000 (17:39 +1200)]
recipetool: allow plugins to set LICENSE and LIC_FILES_CHKSUM
We were being a bit prescriptive in setting LICENSE and
LIC_FILES_CHKSUM. We can't always trust what's in the metadata
accompanying some source which plugins will almost always be pulling
from, however we do want to allow plugins to set the LICENSE and
LIC_FILES_CHKSUM values. Merge what we find in our license file scan
with what the plugin sends back.
Additionally, plugins can now add a "license" item to the handled list
in order to inhibit the normal LICENSE / LIC_FILES_CHKSUM handling if
they have already taken care of it completely.
Thanks to Mark Horn <mark.d.horn@intel.com> for prompting, testing and
fixing this patch.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 21 Aug 2017 05:39:48 +0000 (17:39 +1200)]
recipetool: allow plugins to set PN / PV more easily
Previously if we were able to auto-determine the name from the URL, that
took precedence over any name that might be set in extravalues by a
plugin. Some plugins might be able to get a better idea of the name and
thus we should move defaulting of the name further down after the
plugins have had a chance to set it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
devtool: import: new plugin to import the devtool workspace
Takes a tar archive created by 'devtool export' and imports (untars) it
into the workspace. Currently the whole tar archive is imported, there
is no way to limit what is imported.
devtool: export: new plugin to export the devtool workspace
By default, exports the whole workspace (all recipes) including the source code.
User can also limit what is exported with --included/--excluded flags. As
a result of this operation, a tar archive containing only workspace metadata
and its corresponding source code is created, which can be properly imported
with 'devtool import'.
devtool: upgrade: enable branch checking when revision is provided
When devtool upgrade is run on a recipe with revision specified
that is not on master branch, and branch isn't set by --srcbranch or -B,
then we should get the correct branch and append the branch to the URL.
If the revision was found on multiple branches, we will display error
to inform user to provide a correct branch and exit.
[YOCTO #11484]
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stanley Phoong [Mon, 21 Aug 2017 05:39:43 +0000 (17:39 +1200)]
recipetool: create: replacing PV in SRCURI
During recipe creation, it seems that the automation for replacing
${PV} at the SRCURI for tag, (e.g mbed-tls-${PV}) is causing some
issue due to PV assuming it's a git source. A fix is implemented in
this patch to resolve this issue.
Signed-off-by: Stanley Phoong <stanley.cheong.kwan.phoong@intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stanley Phoong [Mon, 21 Aug 2017 05:39:42 +0000 (17:39 +1200)]
recipetool: create: handle git URLs specifying only a tag
If a git URL is passed to recipetool create with a tag=, recipetool
should handle it assuming that the tag is valid.
[YOCTO #11393]
Signed-off-by: Stanley Phoong <stanley.cheong.kwan.phoong@intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
recipetool: create: being able to set branch when revision is provided
This change is to improve the buildability of the recipe created by
recipetool and devtool.
When recipetool create is run on a git URL and a revision specified
that is not on master, and "branch=" isn't already in the URL, then
we should get the correct branch and append the branch to the URL.
If the revision was found on multiple branches and 'master' is not
in the list, we will display error to inform user to provide a
correct branch and exit.
[YOCTO #11389]
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
recipetool: create: disable PREMIRRORS and MIRRORS by default
When creating new recipes, we are almost certainly fetching a new
source rather that something that has already been fetched. I have
disable PREMIRRORS and MIRRORS settings in the recipe that created
by devtool while leaving an option for users to enable them manually
if needed. Since devtool already has this options, we need to ensure
that recipetool is able to handle the options passed from devtool.
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
devtool/copy_buildsystem: adds meta-skeleton layer in the eSDK installation.
The eSDK installation requires the meta-skeleton layer.
The build system might use the meta-skeleton recipes as layout
to create custom recipes. An example is the recipetool script
that uses the meta-skeleton kernel recipe when creating a custom
kernel recipe.
[YOCTO #11102]
Signed-off-by: Juan M Cruz Alcaraz <juan.m.cruz.alcaraz@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initramfs-framework/setup-live: also boot live image if root=/dev/ram0
Our grub and syslinux bootloaders both define root=/dev/ram0 for live
images by default. Kernel docs show that root=/dev/ram0 is just a
sentinel value for the kernel to mount the initrd as root, which then
mounts and switches to the real root. This is exactly what our scripts
do, so just check for root=/dev/ram0 as well.
openssl10: rename back to openssl and make it the default via PREFERRED_VERSION
openssl 1.1 broke 3rd party layers a lot more than was expected; let's flip
the switch at the start of next development cycle.
Add a PROVIDES = "openssl10" to openssl 1.0 recipe; any dependency that is
not compatible with 1.1 should use that in its DEPENDS, as the 1.0
recipe will later be renamed back to openssl10. This does not always work:
http://lists.openembedded.org/pipermail/openembedded-core/2017-August/140957.html
but for many recipes it does.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Fri, 18 Aug 2017 19:12:33 +0000 (14:12 -0500)]
prelink: Change the behavior to avoid checking USER_CLASSES
The behavior before this change was to check USER_CLASSES and adjust
the install script to return either exit 0 (don't do anything) or
exit 1 (run on first boot). This enabled a user to include the prelink
package without enablign the image-prelink bbclass and get a first boot
prelink.
Checking USER_CLASSES is not desired, as an image should be able to simply
inherit the image-prelink and get the same type of behavior. Modifying
the recipe based on the inclusion of a class is a bad idea as it makes
this style work more difficult. So we move to a more defined strategy
based on exist uses. (That we know of...)
If we ae doing a cross install, we want to avoid prelinking.
Prelinking during a cross install should be handled by the image-prelink
bbclass. If the user desires this to run on the target at first boot
they will need to create a custom boot script.
[YOCTO #11169]
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joe Slater [Fri, 18 Aug 2017 17:43:44 +0000 (10:43 -0700)]
ruby: fix CVE-2017-922{6-9}
CVE-2017-9226 : check too big code point value for single byte
CVE-2017-9227 : access to invalid address by reg->dmin value
CVE-2017-9228 : invalid state(CCS_VALUE) in parse_char_class()
CVE-2017-9229 : access to invalid address by reg->dmax value
Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andreas Müller [Thu, 10 Aug 2017 09:37:55 +0000 (11:37 +0200)]
mesa: update to 17.1.6
Optional installation of khrplatform.h was implemented upstream by a slightly
different approach -> 0001-mapi-Only-install-khrplatform.h-with-EGL-or-GLES.patch
can be removed.
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* without this package installed any WebKitGTK+ based browser
will fail to correctly open html files (and other files)
from disk (file:// URIs). It will open them as plain txt files.
Signed-off-by: Carlos Alberto Lopez Perez <clopez@igalia.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ooi Cinly [Wed, 16 Aug 2017 01:17:50 +0000 (09:17 +0800)]
libtool: remove /absolute/path/to/host references
Removed all instances of -fdebug-prefix-map in LTCFLAGS
declaration because they contain references to host system
and are not needed.
/absolute/path/to/host/dd was replaced with 'dd' in
lt_truncate_bin declaration.
Please take note that the location of regex is important
for DEBUG_PREFIX_MAP. Removal of DEBUG_PREFIX_MAP has to be
done before other regex command modify its option value.
Both are modified because they affect binary reproducibility.
[YOCTO #11656]
Signed-off-by: Ooi Cinly <cinly.ooi@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Thu, 17 Aug 2017 05:43:17 +0000 (22:43 -0700)]
rootfs-postcommands.bbclass: Filter out dangling symlinks in ssh_allow_empty_password()
In images built with pam in DISTRO_FEATURES, we end up with dangling symlinks
if su is not packaged into image
$ ls /mnt/a/oe/build/tmp/work/raspberrypi3-bec-linux-gnueabi/core-image-minimal/1.0-r0/rootfs/etc/pam.d/su-l -l
lrwxrwxrwx 1 kraj users 2 Aug 9 07:56 /mnt/a/oe/build/tmp/work/raspberrypi3-bec-linux-gnueabi/core-image-minimal/1.0-r0/rootfs/etc/pam.d/su-l -> su
This causes image do_rootfs to fail
| sed: can't read /mnt/a/oe/build/tmp/work/raspberrypi3-bec-linux-gnueabi/core-image-minimal/1.0-r0/rootfs/etc/pam.d/s
u-l: No such file or directory
| WARNING: /mnt/a/oe/build/tmp/work/raspberrypi3-bec-linux-gnueabi/core-image-minimal/1.0-r0/temp/run.ssh_allow_empty_
password.19238:1 exit 2 from 'sed -i 's/nullok_secure/nullok/' /mnt/a/oe/build/tmp/work/raspberrypi3-bec-linux-gnueabi
/core-image-minimal/1.0-r0/rootfs/etc/pam.d/*'
Therefore we need to filter out dangling symlinks before sed'ing
things out
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jackie Huang [Thu, 17 Aug 2017 06:44:29 +0000 (14:44 +0800)]
libsndfile1: Fix CVE-2017-8363
Backport the patch to fix CVE-2017-8363:
The flac_buffer_copy function in flac.c in libsndfile 1.0.28 allows
remote attackers to cause a denial of service (heap-based buffer
over-read and application crash) via a crafted audio file.
Jackie Huang [Thu, 17 Aug 2017 06:44:28 +0000 (14:44 +0800)]
libsndfile1: Fix CVE-2017-8362
Backport the patch to fix CVE-2017-8362:
The flac_buffer_copy function in flac.c in libsndfile 1.0.28 allows
remote attackers to cause a denial of service (invalid read and
application crash) via a crafted audio file.
Jackie Huang [Thu, 17 Aug 2017 06:44:27 +0000 (14:44 +0800)]
libsndfile1: Fix CVE-2017-8361 and CVE-2017-8365
Backport the patch to fix two CVEs:
CVE-2017-8361:
The flac_buffer_copy function in flac.c in libsndfile 1.0.28 allows
remote attackers to cause a denial of service (buffer overflow and
application crash) or possibly have unspecified other impact via a
crafted audio file.
CVE-2017-8365:
The i2les_array function in pcm.c in libsndfile 1.0.28 allows remote
attackers to cause a denial of service (buffer over-read and application
crash) via a crafted audio file.
Yi Zhao [Thu, 17 Aug 2017 07:40:30 +0000 (15:40 +0800)]
wget: Security fix CVE-2017-6508
CVE-2017-6508: CRLF injection vulnerability in the url_parse function in
url.c in Wget through 1.19.1 allows remote attackers to inject arbitrary
HTTP headers via CRLF sequences in the host subcomponent of a URL.
Jackie Huang [Thu, 17 Aug 2017 07:39:13 +0000 (15:39 +0800)]
xserver-xorg: Fix CVE-2017-10971
Backport 3 patches to fix CVE-2017-10971:
In the X.Org X server before 2017-06-19, a user authenticated to an X
Session could crash or execute code in the context of the X Server by
exploiting a stack overflow in the endianness conversion of X Events.
Andrej Valek [Thu, 17 Aug 2017 13:16:01 +0000 (15:16 +0200)]
copy_buildsystem: include layer tree during build structure creation
When buildsystem with layer structure is going to be copied, only the last
meta-XXX layer is taken.
For example, during ext_sdk bblayers creating:
layers/oe/meta \
layers/oe/meta-oe \
layers/oe/meta-networking \
layers/oe/meta-webserver \
...
It restructured meta-oe, meta-networking,... contents into meta-oe.
Recipes from meta-oe will be on the same level like meta-networking,
meta-webserver, ... .
It should take the whole meta path instead of the last one.
layers/oe/meta \
layers/oe/meta-oe/meta-oe \
layers/oe/meta-oe/meta-networking \
layers/oe/meta-oe/meta-webserver \
...
Now the directory structure is the same like during build creation.
Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Pascal Bach <pascal.bach@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
report-error: provide distro identifier string in case of uninative build
Besides providing the NATIVELSBSTRING, include distro info when creating
the (json) error report. This information provides better info than the
standard 'universal*' string for uninative builds.
[YOCTO #11824]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sign_rpm: Allow pkg signing by chunks through RPM_GPG_SIGN_CHUNK
Commit d58b1d196 moved from chunk to serial signing, but neither of both approaches
allowed the user to select the chunks size. This patch allows the user to select
a chunk size through RPM_GPG_SIGN_CHUNK defaulting to BB_NUMBER_THREADS, considered
a good default. Indirectly, this change reduces the number of processes spawn
to number-of-packages/RPM_GPG_SIGN_CHUNK.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Thu, 17 Aug 2017 16:41:08 +0000 (09:41 -0700)]
systemd-boot: Move adjacent to systemd
We always forget to upgrade it when systemd is upgraded, keeping it
next to systemd will be an easy reminder to upgrade this recipe along
with systemd
Define EFI_CC, so far it has been using detection mechanism which
worked with gcc but falls back to native gcc when using non-gcc compiler
as default system compiler e.g. clang
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hongxu Jia [Fri, 18 Aug 2017 07:31:52 +0000 (03:31 -0400)]
logrotate: fix systemd service not found while multilib
...
|ERROR: lib32-logrotate-3.12.3-r0 do_package: SYSTEMD_SERVICE_lib32-logrotate
value lib32-logrotate.service does not exist
|ERROR: lib32-logrotate-3.12.3-r0 do_package: Function failed:
systemd_populate_packages
...
The systemd sercie file should not be multilib expend.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hongxu Jia [Thu, 17 Aug 2017 08:35:14 +0000 (04:35 -0400)]
gpgme: remove local m4/python.m4
While multilib, the local m4/python.m4 incorrectly assigned
am_cv_python_pyexecdir and am_cv_python_pythondir which caused
the following error enabled:
...
ERROR: gpgme-1.9.0-r0 do_package: QA Issue: gpgme: Files/directories
were installed but not shipped in any package:
/usr/lib/python3.5/site-packages/gpg-1.9.0-py3.5.egg-info
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wenzong Fan [Wed, 16 Aug 2017 05:58:36 +0000 (22:58 -0700)]
sqlite3: upgrade to 3.2.0
* Uprev from 3.19.3 to 3.2.0 for fixing CVE-2017-10989:
The getNodeSize function in ext/rtree/rtree.c in SQLite through 3.19.3,
as used in GDAL and other products, mishandles undersized RTree blobs
in a crafted database, leading to a heap-based buffer over-read or
possibly unspecified other impact.
https://nvd.nist.gov/vuln/detail/CVE-2017-10989
* LIC_FILES_CHKSUM updated for below changes:
-** 2001 September 15
+** 2001-09-15
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rebase patches:
- tic-hang.patch -> 0001
- configure-reproducible.patch -> 0002
Drop fix-cflags-mangle.patch, which accepted by upstream
...
commit 1b74f120ab7be89011408a6ad0f1c748a314bae8
Author: Sven Joachim <svenjoac@gmx.de>
Date: Sun Feb 26 09:01:34 2017 +0100
Drop obsolete patches
- 0001-elf_getarsym-Silence-Werror-maybe-uninitialized-fals.patch
Upstream fixed it
https://sourceware.org/git/?p=elfutils.git;a=commit;h=7114c513fbebcca8b76796b7f64b57447ba383e1
- Drop debian patches, they modify test case.
debian/testsuite-ignore-elflint.diff
debian/kfreebsd_path.patch
debian/hurd_path.patch
debian/ignore_strmerge.diff
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2. Drop search-for-libxml2.patch
It is overrided by libxml2-configure-argument.patch
3. Rework dhclient-script-drop-resolv.conf.dhclient.patch and
Drop replace-ifconfig-route.patch.
vim client/scripts/linux
...
Script refresh in 2017. The aliasing code was too convoluted and needs
to go away. Migrated DHCPv4 script to ip command from iproute2 suite.
This is based on Debian script with some tweaks. ifconfig is no longer
used. Everything is done using ip tool from ip-route2.
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Wed, 16 Aug 2017 11:57:16 +0000 (19:57 +0800)]
base-files: respect VOLATILE_LOG_DIR
Respect VOLATILE_LOG_DIR variable. In this way, if the user overrides
this variable to be any valid boolean false value, /var/log on the final
image would reside on persistent storage.
[YOCTO #6132]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fabio Berton [Wed, 16 Aug 2017 20:15:44 +0000 (17:15 -0300)]
python3-native: Add python3-misc-native to RPROVIDES
OE-core commit 800753069f667cd1664d70b3779150c467e3b3fe remove
RPROVIDES list to get runtime dependences from manifest file.
python3-misc is added in python3 recipe, we need to add
native runtime to use python3-misc with native recipes.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Wed, 16 Aug 2017 21:10:53 +0000 (14:10 -0700)]
mkelfimage: Make -fno-stack-protector effective
mkelfimage uses different flags to compile as freestanding binary
it does not pour CFLAGS into them during configure as a result
-fno-stack-protector was never used. Which failed to build with
compilers configured to build with ssp by default. It worked with
gcc since we do not configure our toolchain to default to ssp
Fixes errors e.g.
| objdir/linux-i386/convert_params.o: In function `convert_params':
| linux-i386/convert_params.c:(.text+0x9f4): undefined reference to `__stack_chk_fail'
| objdir/linux-i386/convert_params.o: In function `compute_checksum':
| linux-i386/convert_params.c:(.text+0xa71): undefined reference to `__stack_chk_fail'
| objdir/linux-i386/convert_params.o: In function `printf':
| linux-i386/convert_params.c:(.text+0xcc7): undefined reference to `__stack_chk_fail'
| make: *** [linux-i386/Makefile:24: objdir/linux-i386/convert] Error 1
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Tue, 15 Aug 2017 21:41:57 +0000 (16:41 -0500)]
rpm: Disable perl dependency generation
When rpmdeps files a perl script, it attempts to determine what it provides
and what it requires. Often the requires are incorrect, within the context
of Wind River Linux. This results in an error that DNF is unable to install
a package due to one or more unresolved dependencies.
In RPM5 we had disabled this behavior, the alternative is to require that all
perl scripts be 'complete', in that they only require things they absolutely
need and that OE provides. If we ever enforce that, this commit can be
reverted. Until they fall back to prior behavior (which also matches ipkg
and deb style packages.)
package.bbclass: Restore functionality to detect RPM dependencies
During the transition to dnf and rpm4, the functionality to
automatically make RPM determine dependencies was lost.
Before the transition, an OE specific tool called rpmdeps-oecore had
been added to the rpm suit. It was based on the rpmdeps tool that is
part of rpm. For each file specified on its command line, it would
output the provides and requires that RPM could determine.
During the transition to rpm4, rpmdeps-oecore was replaced with the
standard rpmdeps. However, what no one noticed was that unless rpmdeps
is given options, e.g., -P or -R, to tell it what it should output, it
will not output anything. Thus, it would do all the work to determine
the requirements, but would keep silent about it. And since no output
from rpmdeps is expected unless there are requirements, there were no
warnings indicating that everything was not working as expected.
Porting the old rpmdeps-oecore to work with rpm4 is not really
possible since it relied on being able to access internals of RPM that
are no longer available. However, it turned out that rpmdeps had a
debug option, --rpmfcdebug, that would output exactly the information
that we need, albeit in a different format and to stderr. To make this
usable, rpmdeps has now received a new option, --alldeps, which sends
the information we need to stdout.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Wed, 16 Aug 2017 15:55:21 +0000 (10:55 -0500)]
ltp: Skip the filedependency scan
Since LTP includes a set of test cases, we need to skip file dependency
generation, as there will be dependencies that can not be satisfied. In this
case a csh and ksh dependency come from two tests.
The alternative would be to depend on csh/ksh (a bad idea as they're not
available in oe-core) or remove the tests (but this eliminates the tests if
someone DOES have csh/ksh in their configurations.)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 16 Aug 2017 13:47:16 +0000 (14:47 +0100)]
openssl: Add missing bash/python rdepends for ptest
ERROR: openssl-1.1.0f-r0 do_package_qa: QA Issue: /usr/lib/openssl/ptest/fuzz/helper.py contained in package openssl-ptest requires /usr/bin/python, but no providers found in RDEPENDS_openssl-ptest? [file-rdeps]
ERROR: openssl-1.1.0f-r0 do_package_qa: QA Issue: /usr/lib/openssl/ptest/test/certs/mkcert.sh contained in package openssl-ptest requires /bin/bash, but no providers found in RDEPENDS_openssl-ptest? [file-rdeps]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ming Liu [Wed, 16 Aug 2017 04:34:08 +0000 (06:34 +0200)]
image.bbclass: drop initramfs bundle related code
The original purpose of this code snippet was to repackage initramfs
bundled kernel images before do_image_complete, to be able to be
included by rootfs, but it's not going to achieve that since the
initramfs bundled kernel images are not even installed to ${D}/boot
after commit a49569e3a7534779bbe3f01a0647fd076c95798d:
[ kernel.bbclass: do not copy bundled initramfs to /boot ]
So there is not a initramfs bundled kernel package at all, we should
drop the code, because it is leading kernel do_initramfs_bundle
unnecessarily rerun and it's very time consuming and hence is impacting
the performance a lot.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
