Robert Yang [Mon, 13 Aug 2012 13:03:45 +0000 (21:03 +0800)]
rootfs_deb: move the lock from WORKDIR to DEPLOY_DIR_DEB
* There would be race issue if we put the lock to the WORKDIR, for
example:
bitbake core-image-sato core-image-sato-sdk
If the lock is in their own WORKDIR, the apt-rootfs.conf and
Packages.gz maybe be written by two tasks at the same time, which
would cause unexpected errors.
* Create ${target_rootfs}/etc since the "tar -C" needs it.
Note:
* The rpm has put the lock to DEPLOY_DIR_RPM
* The ipk doesn't need it since it has locks for each deploy directory
and put the opkg.conf in his own WORKDIR, which doesn't like deb put
the apt-rootfs.conf in ${STAGING_ETCDIR_NATIVE}/apt/.
[YOCTO #2495]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
During an attemptonly install, if you try to install two packages that
conflict with each other, a message is generated:
error: Failed dependencies:
dropbear conflicts with openssh-6.0p1-r4.ppc603e
dropbear conflicts with openssh-sshd-6.0p1-r4.ppc603e
This is placed onto stderr (vs stdout), which was not being redirected.
This allowed the log-check code to find the magic key of "Failed" causing
the package installation process to fail. Instead the proper behavior is to
simply ignore the error and proceed with the install.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Thu, 16 Aug 2012 03:15:46 +0000 (20:15 -0700)]
chrpath.bbclass: Account for case when ORIGIN is in RPATH
This fixes a case when RPATH embedded in program have one of
its path already relative to ORIGIN. We were losing that path
if such a path existed. This patch appends it to the new edited
rpath being created when we see it.
Paul Eggleton [Fri, 17 Aug 2012 13:26:33 +0000 (14:26 +0100)]
classes/chrpath: improve chrpath failure handling
When chrpath fails, prefix the error message with the name of the recipe
that is being processed, and include the the output from chrpath, as
well as making the calling task actually fail.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jackie Huang [Fri, 17 Aug 2012 03:11:43 +0000 (11:11 +0800)]
apr-util: fix the rules.mk with path to sysroot instead of the workdir of apr
The copying for rules.mk was happened in do_configure_prepend, but it will be
replaced by the one generated by configure, in which APR_MKEXPORT points to
the workdir of apr and cause compile filure when the workdir of apr is removed.
So change the copying in _prepend to _append.
[YOCTO #2947]
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Laurentiu Palcu [Fri, 17 Aug 2012 10:38:10 +0000 (13:38 +0300)]
package.bbclass: change RPATHs for cross-canadian binaries
When building the meta-toolchain, the binaries didn't get relocatable
RPATHs. They were hardcoded to the default path. Hence, if one had
already installed one SDK in the default path and one in another
location, the later toolchain's binaries would search and load libraries
from the first location, ending in a "Segmentation Fault".
[YOCTO #2927]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The problem appears if multiple setup environment scripts are found. In
order to find only the script we're interested in, I removed globbing in
matching pattern with ${REAL_MULTIMACH_TARGET_SYS} that will be expanded
to the correct string.
Also, fix a problem when changing the scripts/configs. The grep pattern
matched also files that contained "text" in their name.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Peter Seebach [Thu, 16 Aug 2012 16:50:45 +0000 (11:50 -0500)]
base.bbclass: Work even when there's no PNBLACKLIST entries
It turns out that the result of getVarFlags is not a list, it's
a dict. So "getVarFlags(...) or []" does not reliably produce
something with a .items. This escaped detection because our
local build environment never ends up running builds without
PNBLACKLIST entries.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Tue, 14 Aug 2012 14:01:33 +0000 (22:01 +0800)]
sstate-cache-management.sh: update it for the new layout
Update it for the new layout of sstate-cache.
Note: It doesn't handle the old sstate-cache/sstate-xxx.tgz (or
siginfo), the user should remove it manually (rm -fr
sstate-cache/sstate-* would be OK).
[YOCTO #2897]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 14 Aug 2012 16:10:31 +0000 (17:10 +0100)]
classes: add gsettings.bbclass
This class registers postinst/postrm hooks to compile the GSetting schemas, and
adds the relevant dependencies. If possible the postinst happens on the host to
avoid running it on the target.
[ YOCTO #2798 ]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 13 Aug 2012 09:14:23 +0000 (10:14 +0100)]
rpmresolve: improve debug output
Rename rpmresolve's -d option to -t and make -d enable debug output;
add a -o option to specify the output file (so rpm debug output doesn't
go to the output file) and also add a little more detail to some of the
error messages.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Koen Kooi [Mon, 13 Aug 2012 07:49:00 +0000 (09:49 +0200)]
man: make man actually work by installing custom man.config
The default man.conf is named wrong and doesn't work. It references gtbl, while groff installs tbl and other things. This man.conf is imported from OE classic and runtime tested on angstrom.
Before:
root@beaglebone:~# man man
sh: /usr/bin/gtbl: No such file or directory
sh: line 0: echo: write error: Broken pipe
gunzip: write: Broken pipe
gunzip: error inflating
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
After:
root@beaglebone:~# man man
MAN(1) Manual pager utils MAN(1)
NAME
man - an interface to the on-line reference manuals
Bruce Ashfield [Thu, 26 Jul 2012 18:04:31 +0000 (14:04 -0400)]
kernel.bbclass: remove default module_autoload and module_conf values
kernel.bbclass is a common class for many different kernel versions,
and as such the default module_autoload and module_conf values that
it contains are not relevant, or out of date for most builds.
Individual kernel recipes or distros can better specify these
values to meet their needs.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Mihai Lindner [Fri, 10 Aug 2012 09:07:38 +0000 (12:07 +0300)]
sysklogd: removed tabs from syslog.conf
Yocto #2926: syslog.conf should not have tabs within the selector field.
Removed tabs from the selector field of syslog rules. Tabs or spaces
should be used, in syslog.conf, only when separating selectors from
actions.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Andy Ross [Fri, 10 Aug 2012 19:00:41 +0000 (12:00 -0700)]
dbus: Fix pid file in dbus init script
The PIDFILE (/var/run/dbus/pid) referenced by /etc/init.d/dbus-1 did
not match the path (/var/run/messagebus.pid) configured in
/etc/dbus-1/system.conf, so the initscript could start the daemon, but
not stop it. Also remove needless directory ownership logic
(dbus-daemon drops its pid file as root before calling setuid).
Signed-off-by: Andy Ross <andy.ross@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Peter Seebach [Fri, 10 Aug 2012 22:32:56 +0000 (17:32 -0500)]
base.bbclass: Expand PNBLACKLIST across multilibs too
The PNBLACKLIST feature does not currently work with multilibs,
because they have different ${PN}. The obvious thing to do is to
do this at the same point that we do the PREFERRED_PROVIDER
and PREFERRED_VERSION fixups. (Making the PNBLACKLIST check
do the for-each-multilib check requires it to do the multilib
list generation repeatedly.)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Wenzong Fan [Tue, 7 Aug 2012 12:14:23 +0000 (20:14 +0800)]
sysfsutils: install libs to base_libdir
Fix the warning form pcmciautils building:
"WARNING: QA Issue: pcmciautils: /sbin/pccardctl, installed in the
base_prefix, requires a shared library under exec_prefix (/usr):
libsysfs.so.2 => /usr/lib/libsysfs.so.2"
Just refer to Debian/Ubuntu distributions, install sysfsutils libs
to "/lib*" instead of "/usr/lib*".
[YOCTO #2907]
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Wenzong Fan [Thu, 9 Aug 2012 02:59:15 +0000 (10:59 +0800)]
at 3.1.13: get 'at' depends on 'flex-native' explicitly
'at' needs flex to generate source file lex.yy.c, but it doesn't
depend on flex-native directly; This maybe cause a do_compile
failure if flex-native is not built or included in project.
Error message is:
error: lex.yy.c: No such file or directory
Get 'at' depends on flex-native to fix this potential issue.
[YOCTO #2919]
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Yao Zhao [Wed, 8 Aug 2012 18:49:40 +0000 (14:49 -0400)]
gstreamer: gst-ffmpeg: fix build issues for libav
1.The included libav configure is not generated by autotools
modify recipe to use correct toolchain wrapper with configure
2.add bzip2 dependency explicitly.
or configure will detect whether libbz2 is installed, if bzip2
is triggered earlier then it will be detected, if not then won't
3.backport libav_e500mc.patch from upstream to patch configure to
disable-altivec if it is e500mc.
4.move the GSTREAMER_DEBUG to libav's configure, it is not the
option for the main configure.
Signed-off-by: Yao Zhao <yao.zhao@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Jackie Huang [Wed, 8 Aug 2012 05:11:17 +0000 (13:11 +0800)]
tcl: uncomment a line that causing TCL_SRC_DIR point to the workdir.
The line 'sed -i "s+${WORKDIR}+${STAGING_INCDIR}+g" tclConfig.sh'
is commented somehow in previous commit, so that TCL_SRC_DIR
point to the tcl workdir which will cause package that use it
fail to configure or compile when the tcl workdir is removed,
so uncomment it back.
Martin Jansa [Thu, 2 Aug 2012 16:45:09 +0000 (18:45 +0200)]
bitbake.conf: store cooker logs in subdirectory of LOG_DIR
* we should probably wait until
http://git.openembedded.org/bitbake/commit/?id=1e06d8012868ba5a31503dc99cbf18570be629d9
is in next required bitbake version, but error message if the directory doesn't exist is quite clear
* people with new enough bitbake could just change this in their local.conf
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
run-postinsts: Does not run any scripts on debian rootfs
On my system (core-image-base, .deb package files), run-postinsts does
not run any scripts due to a failed test in run-postinsts.awk.
As dpkg is not actually installed on target, opkg is identified as the
pkgdir and that is not right...
Paul Eggleton [Mon, 13 Aug 2012 18:58:00 +0000 (18:58 +0000)]
createrepo: add wrapper script to fix paths
Fixes sstate relocation due to the path to /etc/rpm being baked into the
libraries - this manifested in the form of the following assertion at
runtime:
Paul Eggleton [Mon, 13 Aug 2012 18:54:32 +0000 (18:54 +0000)]
rpmresolve: add wrapper script to fix paths
Fixes sstate relocation due to the path to /etc/rpm being baked into the
libraries - this manifested in the form of the following assertion at
runtime:
Robert Yang [Mon, 13 Aug 2012 13:01:16 +0000 (21:01 +0800)]
qemu.inc: disable curl for qemu-nativesdk
We had added the --disable-curl to EXTRA_OECONF, but there is an
EXTRA_OECONF_virtclass-nativesdk += "foo", the
"EXTRA_OECONF_virtclass-nativesdk +=" equals to
"EXTRA_OECONF_virtclass-nativesdk =" (the "+" has no effect here), so we
should add the "--disable-curl" to EXTRA_OECONF_virtclass-nativesdk.
And change the "+=" to "=" to not confuse people.
[YOCTO #2305]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Wed, 8 Aug 2012 08:56:24 +0000 (11:56 +0300)]
foomatic: fix perl path for target
This problem appears on F17 when configure finds /bin/perl, since the beh
script is a target side script, we need to set PERL in the do_configure_prepend
in order for the correct perl to be used
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
