This test was attempting to exercise a broken test, for some reason this broke
with patches under review but investigation revealed that the test itself is
broken. The test has been removed, so there's no need to test it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Mon, 20 Mar 2017 16:45:14 +0000 (16:45 +0000)]
insane: remove broken unsafe-references-in-binaries test
This test aims to detect binaries in /bin which link to libraries in /usr/lib,
for the case where the user has /usr on a separate filesystem to /.
However it doesn't scan both image/ and the sysroot, so if a binary in /bin
links to a library in /usr/lib that was built by the same recipe then it will
error out.
This test isn't enabled by default, and because of this serious bug I suspect
nobody else is enabling it either. As /usr being on a separate partition to /
is a very rare configuration these days I think we should delete the test: if
someone cares sufficiently they should write a test that actually works.
Signed-off-by: Ross Burton <ross.burton@intel.com>
package.bbclass: Add PRIVATE_LIBS to list of package specific variables
Changes to PRIVATE_LIBS should change the sstate checksum. To make
that happen, it needs to be listed in the list of package specific
variables, therefore add it.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
gpgme: Avoid requiring a host C++ compiler with C++11 support
Building the C++ bindings for native requires a host C++ compiler with
C++11 support. Since these bindings are currently not needed, we can
disable them and thus avoid increasing the requirement for the host C++
compiler.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Patrick Ohly [Mon, 20 Mar 2017 12:26:18 +0000 (13:26 +0100)]
image-buildinfo.bbclass: configurable location for build file
In a stateless image, /etc is not a good place for the "build"
file. By definining the location with a variable it becomes possible
to have the file created elsewhere on a per-image basis. The default
is the same as before.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Daniel Schultz [Mon, 20 Mar 2017 12:18:51 +0000 (13:18 +0100)]
e2fsprogs: Fix wrong error code after optimization
fsck.ext will return an error code of 1 if a file systems was checked
and successfully repaired. Even when an optimization was performed it
will return this error code.
This patch will change the error code to 0 if only optimizations had
changed the file systems.
The reason for this patch is a question I asked at the ext4 ML:
http://www.spinics.net/lists/linux-ext4/msg55700.html
brian avery [Sun, 19 Mar 2017 17:32:40 +0000 (10:32 -0700)]
gen-lockedsig-cache: catch os.link error
We do a hard link to speed up sdk creation but if your sstate-cache is
across a file system boundary, this tries and fails. This patch catches
that error and does a copy instead.
Signed-off-by: brian avery <brian.avery@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jose Lamego [Fri, 17 Mar 2017 22:23:53 +0000 (15:23 -0700)]
python-3.3-multilib.patch: Fixes getpath on multilib configurations
When using multilib configurations either on arm/arm64 and x86/x86-64
python3 failed to execute due to a failure when looking for its
platform independent and dependent libraries.
This patch fixes this issue by assigning lib_python to the appropriate
macro.
[YOCTO #10812]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Jose Lamego <jose.a.lamego@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Mon, 20 Mar 2017 04:16:20 +0000 (17:16 +1300)]
devtool: tidy up handling of parse failures
Since the tinfoil2 refactoring, if an error occurred during parsing, we
were showing a traceback and not correctly exiting (since we weren't
calling shutdown()). Fix both of these issues.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Mon, 20 Mar 2017 04:16:19 +0000 (17:16 +1300)]
oe-selftest: tinfoil: add tests for recently enabled datastore operations
A recent patch to bitbake fixes these datastore operations so that they
actually affect the server end, so we should test that they work.
(For full disclosure, some of these tests would probably pass without
those fixes, since the operation would be done on the client side
instead - but we are at least exercising the code paths.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
brian avery [Sat, 18 Mar 2017 15:08:47 +0000 (08:08 -0700)]
meta/lib/oeqa: change sdk test from cvs to cpio
We currently fetch,configure,build, and install cvs as our test for the
sdk. cvs unfortunately, requires a default editor in order to run. The
change in 94790a8254d6 that checks to see if you have something like vi
installed is fragile since you may have a different default editor. This
patch switches from using cvs as a test to using cpio. cpio also uses
autotools so the functionality tested is equivalent.
Signed-off-by: brian avery <brian.avery@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
When rewriting the do_rm_work injection, do_rm_work_all had been
removed because it seemed obsolete, as do_build now always triggers
do_rm_work.
However, do_build does not get triggered for all recipes and thus
do_rm_work was not called for recipes that got built only
partially. For example, zlib depends indirectly on
zlib-native:do_populate_sysroot. Because of that dependency,
zlib-native got compiled, but do_rm_work was never called for it.
Re-introducing do_rm_work_all fixes that by making do_build depend on
do_rm_work_all, which then recursively depends on do_rm_work of all
dependencies. This has the unintended side-effect that do_rm_work then
also triggers additional work (like do_populate_lic) that normally
doesn't need to be done for a build. This seems like the lesser evil,
compared to an incomplete cleanup because it mostly enables the
lighter tasks after do_populate_sysroot.
The real solution would be to have two kinds of relationships: a weak
ordering relationship ("if A and B are enabled, A must run before B,
but B can also run without A") and hard dependencies ("B cannot run
unless A has run before").
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Patrick Ohly [Fri, 17 Mar 2017 17:56:59 +0000 (18:56 +0100)]
image_types_wic.bbclass: tighten dependency to help do_rm_work_all
Depending on wic-tools:do_build pulls a lot of additional, indirect
dependencies into the image sysroot during do_image_wic as soon as
rm_work.bbclass is active, because then we have
do_build->do_rm_work_all->[all dependencies]. One of those
dependencies is libgcc-initial, which clashes with libgcc itself,
leading to errors in extend_recipe_sysroot like this:
As the image recipe only needs the sysroot of wic-tools and does not
need to wait for the build of wic-tools to finish, depending on
do_populate_sysroot is the better choice and happens to avoid
the problem above.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Florian Wickert [Fri, 17 Mar 2017 15:33:03 +0000 (16:33 +0100)]
kernel-fitimage: dtb sections named by their filenames and one config section for each dtb
Before this, dtb sections were named by their position index in KERNEL_DEVICETREE. Also there was only one item in the config section, so only the first dtb was seen by the bootloader.
This patch adds a config section for each dtb named by the dtb filename. This is what bootloaders usually know about the machine they run on.
Signed-off-by: Florian Wickert <fw@javox-solutions.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Khem Raj [Thu, 16 Mar 2017 20:33:57 +0000 (20:33 +0000)]
ltp: Fix __sighandler_t for mips
mips definition of kernel_sigaction was added later
and the patch did not apply to mips part which ended
in ltp failing to compile on mips parts
In file included from rt_sigaction01.c:42:0:
../../../../include/lapi/rt_sigaction.h:39:2: error: unknown type name '__sighandler_t'
__sighandler_t k_sa_handler;
^~~~~~~~~~~~~~
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Amarnath Valluri [Tue, 14 Feb 2017 14:07:56 +0000 (16:07 +0200)]
lttng-modules: Replace '/lib' with ${nonarch_base_libdir}
Do not assume '/lib' for kernel modules location, instead use
${nonarch_base_libdir}. When 'usrmerge' is enabled, kernel modules are not
located in /lib/modules, but /usr/lib/modules.
net-tools: Place package content as per bitbake environment.
net-tools Makefile was hardcoded sbin, bin installation paths to /bin and /sbin
respectively. This change moves the installed files to appropriate location as
per configured bitbake environment.
This might be solved much better way by patching Makefile, but that causing
build issues, as net-tools recipe is using pre-generated config.{h/status}.
Amarnath Valluri [Tue, 24 Jan 2017 14:07:20 +0000 (16:07 +0200)]
util-linux,shadow: Make 'nologin' alternative command
Both shadow and util-linux packages provides 'nologin' binary in ${base_sbindir}
and ${sbindir} respectively, this leads to conflict when 'usrmerge' feature is
enabled, where ${sbindir} == ${base_sbindir}. Hance, handle this to alternative
system to resolve the conflict.
Amarnath Valluri [Tue, 24 Jan 2017 12:50:25 +0000 (14:50 +0200)]
util-linux: Make sure '${base_bindir}/reset' is part of util-linux-reset package.
update-alternative.bbclass might rename the 'reset' binary when LINK_NAME ==
TARGET, This is true (${base_bindir} == ${bindir}) in 'usrmerge' distros.
Hence, suffix with * to properly package the renamed binary.
Amarnath Valluri [Tue, 24 Jan 2017 10:08:46 +0000 (12:08 +0200)]
systemd: Do not add libnss_* to systemd package
libnss_* files should be part of corresponding sub-packages, the split happens
by do_package_split(). By adding ${libdir}/libnss_* to FILES_${PN}, those files
end up in the systemd package when ${libdir} == ${base_libdir}.
Kristian Amlie [Fri, 10 Mar 2017 13:16:27 +0000 (14:16 +0100)]
wic/partionedfs: Avoid reserving space for non-existing ext. partition
We don't need the gap that the extended partition occupies if we
already know that we have less than five partitions. Saves up to one
full alignment of space.
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io> Signed-off-by: Ross Burton <ross.burton@intel.com>
useradd-staticids.bbclass: Always fail/warn for missing IDs
Previously, with USERADD_ERROR_DYNAMIC set to error/warn, if a static
UID/GID was specified in the recipe, then no error/warning would be
issued even if no ID was specified in the passwd/groups files.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
useradd-staticids.bbclass: Support recipes specifying static IDs
If this bbclass is used and a recipe specifies a static ID for a
user/group as part of the USERADD_PARAM_${PN} or GROUPADD_PARAM_${PN},
the build would fail with and error like this if there was no
corresponding ID in the passwd/group files specified via
USERADD_UID_TABLES/USERADD_GID_TABLES:
ERROR: meta-oe/recipes-support/postgresql/postgresql_9.4.11.bb:
meta-oe/recipes-support/postgresql/postgresql_9.4.11.bb inherits
useradd but doesn't set USERADD_PARAM, GROUPADD_PARAM or
GROUPMEMS_PARAM for package postgresql
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Andre McCurdy [Sat, 11 Mar 2017 01:31:19 +0000 (17:31 -0800)]
feature-arm-thumb.inc: fix ARM_THUMB_SUFFIX for armv8
The current definition for ARM_THUMB_SUFFIX doesn't consider armv8
and will therefore cause TUNE_PKGARCH to be set incorrectly for
machines which inherit arch-armv8 and don't include aarch64 in
TUNE_FEATURES (ie when building for 32bit ARMv8).
Also fix typo in comments and improve TUNEVALID[thumb] wording.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ed Bartosh [Fri, 17 Mar 2017 13:18:35 +0000 (15:18 +0200)]
bitbake.conf: add sudo to HOSTTOOLS_NONFATAL
runqemu is using sudo to configure tap networking. Without sudo
in HOSTTOOLS_NONFATAL it may cause bitbake -c testimage to fail
with this error:
runqemu - INFO - Setting up tap interface under sudo
/bin/sh: sudo: command not found
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Fri, 17 Mar 2017 13:18:32 +0000 (15:18 +0200)]
runqemu: output network configuration
runqemu adds network configuration parameters to the kernel
command line to configure guest networking. This works only
for the images that run with external kernel using qemu -kernel
parameter. It doesn't work for the images that use bootloader
to boot kernel as -kernel parameter is not used and network
configuration is not possible to get.
Added host and guest ip addresses and netmask of tap link
to the runqemu output. This should allow external programs
that execute runqemu to get network configuration.
[YOCTO #10833]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
brian avery [Wed, 15 Mar 2017 13:48:01 +0000 (06:48 -0700)]
nativesdk-packagegroup-sdk-host.bb: add cmake
The Eclipse plugin uses cmake from the SDK and currently has issues
because cmake is not installed as a host tool. This patch adds cmake as
a host tool for the sdk/esdk.
Signed-off-by: brian avery <brian.avery@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Mike Crowe [Wed, 15 Mar 2017 12:29:16 +0000 (12:29 +0000)]
ccache: Disable CCACHE_HASHDIR by default
As of ccache-3.3, ccache tries to ensure that the paths in the debug
information are always correct. It does this by including the current
directory in the hash if debug output is enabled. It includes support for
detecting remapping via a single -fdebug-prefix-map argument uses the
remapped directory in the hash instead.
The DEBUG_PREFIX_MAP in bitbake.conf remaps the source directory, target
sysroot and native sysroot separately which results in multiple
-fdebug-prefix-map arguments. Although ccache passes all these arguments
through to the compiler, it only enables the special behaviour described
above if the last one matches the current directory. (See
https://github.com/ccache/ccache/issues/163 )
Even if ccache did correctly honour each of the remapping arguments, the
hashes would still be different every time ${PV} or ${PR} change because
the default DEBUG_PREFIX_MAP contains maps to paths including them.
So it seems that for ccache to be of any use with this configuration,
CCACHE_NOHASHDIR needs to be set.
Signed-off-by: Mike Crowe <mac@mcrowe.com> Helped-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Robert Yang [Tue, 14 Mar 2017 08:45:45 +0000 (01:45 -0700)]
oe/path.py: fix for "Argument list too long"
Issue: LIN9-1648
Fixed when len(TMPDIR) = 410:
$ bitbake core-image-sato-sdk
[snip]
Subprocess output:
/bin/sh: /bin/cp: Argument list too long
ERROR: core-image-sato-sdk-1.0-r0 do_rootfs: Function failed: do_rootfs
[snip]
This is because "copyhardlinktree(src, dst)" does "cp -afl src/* dst",
while src/* is expanded to "src/file1 src/file2, src/file3..." which
causes the "Argument list too long", use ./* as src and change cwd in
subprocess.check_output() to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
The copy of extended attributes is interesting for
Smack systems because it allows to set the security
template of the user's home directories without
modifying the tools (useradd here). But the version
of useradd that copies the extended attributes doesn't
copy the extended attributes of the root. This can make
use of homes impossible! This patch corrects the issue
by copying the extended attributes of the root directory:
/home/user will get the extended attributes of /etc/skel.
The patch is submitted upstream (see
http://lists.alioth.debian.org/pipermail/pkg-shadow-commits/2017-March/003804.html)
The existing patch specific to open-embedded is updated:
0001-useradd.c-create-parent-directories-when-necessary.patch
Also, attr are activated for native tools.
This is needed when users are created during image creation.
Olof Johansson [Sat, 11 Mar 2017 05:28:52 +0000 (06:28 +0100)]
openssl: Disable make's -e flag without breaking ${AR}
The OpenSSL recipe tried to workaround the -e make flag (overriding
variables from the environment). And when the -e flag was dropped as
the global default, it was specifically added for OpenSSL. This is
unnecessary, as only the value of ${AR} seems to be affected, and that
can be handled correctly by OpenSSL's build system if we just let it.
Signed-off-by: Olof Johansson <olof.johansson@axis.com> Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
toaster.bbclass: Correct parsing of installed-package-sizes.txt
The recent change in buildhistory.bbclass to use a tab in
installed-package-sizes.txt between "KiB" and the package name caused
toaster_buildhistory_dump() to fail since it parses the file and
expected a space there.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ismo Puustinen [Fri, 10 Mar 2017 10:10:25 +0000 (12:10 +0200)]
gcc: move cc1 binary file to package cpp.
The file /usr/libexec/gcc/.../cc1 has been installed in package gcc
instead of package cpp, because FILES statements for both packages match
the cc1 binary. Move the file to package cpp and add cpp to RDEPENDS_gcc
to fix the dependency.
Having the cc1 binary in cpp fixes errors such as: "cpp: error trying to
exec 'cc1': execvp: No such file or directory".
Signed-off-by: Ismo Puustinen <ismo.puustinen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Chen Qi [Fri, 10 Mar 2017 07:03:05 +0000 (15:03 +0800)]
procps: fix ALTERNATIVE_PRIORITY to avoid conflict
Previously, 'pidof' utility has two providers, sysvinit and procps, and
both have the same priority 200. Fix procps to lower the priority of its
'pidof' to 150 to avoid conflict.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Gortmaker [Thu, 16 Mar 2017 18:42:14 +0000 (14:42 -0400)]
file: update SRCREV for 5.30 to fix fetch fail on missing commit
Machines that cloned a while ago will have the commit, but new
deployments won't because it seems the upstream changed/rebased
and the old commit ID has been garbage-collected away. Hence
the fetch fails to check out the named commit ID.
Both the old (gone) commit, and the "new" commit show the same
dates and commit log and point at 5.30, so hopefully this is
the right thing to do. A git diff of the two seems to only show
a blanket uprev of CVS tags and deletion of a couple autogen'd
files, and no real source changes.
Cc: Christos Zoulas <christos@zoulas.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Tue, 14 Mar 2017 23:35:32 +0000 (16:35 -0700)]
musl: Update to latest
Rich Felker (11):
fix ld-behavior-dependent crash in ppc64 ldso startup
rework ldso handling of global symbol table for consistency
reorder addend handling before symbol lookup in relocation code
emulate lazy relocation as deferrable relocation
fix free of uninitialized buffer pointer on error in regexec
in static dl_iterate_phdr, fix use of possibly-uninitialized aux data
fix possible fd leak, unrestored cancellation state on dns socket fail
fix wide scanf's use of a compound literal past its lifetime
fix one-byte overflow in legacy getpass function
avoid loading of multiple libc versions via explicit pathname
remove unused refcnt field for shared libraries
Szabolcs Nagy (1):
treat STB_WEAK and STB_GNU_UNIQUE like STB_GLOBAL in find_sym
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Tue, 14 Mar 2017 23:35:31 +0000 (16:35 -0700)]
binutils: Enable threading when gold is enabled and is not default linker
Currently we enable threaded linking feature of gold linker only
when its used as default ld. There is no need to restrict it when
its not default linker either. As long as gold is enabled, which
is the case here, we should be able to do threaded linking.
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Tue, 14 Mar 2017 23:35:28 +0000 (16:35 -0700)]
mesa: Contain configure search for llvm
Configure has an unbridled check for llvm and
when distro provided llvm is installed on build host it
will use that from /usr/bin to poke for llvm libs
and configs. This would result in a subtle errors
however do_qa_configure catches it as a host include/lib
contamination during configure checks
ERROR: mesa-gl-2_17.0.1-r0 do_configure: This autoconf log indicates errors, it looked at host include and/or library paths while determining system capabilities.
Rerun configure task after fixing this.
This is correct because when configure detects build host provided
llvm then it add the include/lib paths to compiler cmdline which are
looking into /usr/include and /usr/lib
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Gortmaker [Thu, 16 Mar 2017 15:20:58 +0000 (11:20 -0400)]
package_manager: fix "exlcude" vs. "exclude" typo
Which results in:
--------------------------------
0557: package_exclude = self.d.getVar('PACKAGE_EXCLUDE')
*** 0558: exclude_pkgs = (bad_recommendations.split() if bad_recommendations else []) + (package_exlcude.split() if package_exclude else [])
0559:
0560: output = self._invoke_dnf((["--skip-broken"] if attempt_only else []) +
0561: (["-x", ",".join(exclude_pkgs)] if len(exclude_pkgs) > 0 else []) +
0562: (["--setopt=install_weak_deps=False"] if self.d.getVar('NO_RECOMMENDATIONS') == 1 else []) +
Exception: NameError: name 'package_exlcude' is not defined
ERROR: cube-builder-initramfs-1.0-r0 do_rootfs: Function failed: do_rootfs
---------------------------------
Cc: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Gortmaker [Thu, 16 Mar 2017 14:20:52 +0000 (10:20 -0400)]
gdb: don't bundle bfd.info -- leave that to binutils.
We see:
file /usr/share/info/bfd.info conflicts between attempted installs
of gdb-doc-7.12.1-r0.core2_64 and binutils-doc-2.28-r0.core2_64
You can't really have gdb and not binutils, so there is no need
to do alternatives here ; just clobber the one from gdb and let
the binutils one be the default.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dnf: add /usr/bin/dnf symlink that points to /usr/bin/dnf-2
All documentation refers to dnf binary as 'dnf' yet make install
does not create one - it's done by Fedora's spec file when building
the rpm. Let's replicate this behavior.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Markus Lehtonen [Thu, 16 Mar 2017 13:19:05 +0000 (15:19 +0200)]
lib/oe/package_manager: import rpm signing key to rpmdb
Import the gpg key used in rpm signing into rpmdb. This makes it
possible again to create images when rpm signing is enabled.
Also, instruct dnf to enforce signature check if rpm signing is enabled.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rpm: add support for remote package feeds via PACKAGE_FEED_URIS variable
I've used a previous patch (which was never merged) by
Humberto Ibarra <humberto.ibarra.lopez@intel.com> as a model
for how to do runtime testing of this feature (e.g. we need to boot
an image, run dnf on it, and check that it is indeed able to
access the remote repo over http). Here's his original commit message:
=====
Testing that feeds specified with PACKAGE_FEED_URIS var are set
correctly has two parts. First a build with this var set is required,
and then smart update needs to be issued in the running taget.
The previous is not a common selftest practice because this is a
simple test, but requires building and running a specific image,
which takes a lot of time. testimage is not a good fit either,
since the images tested there do not have the PACKAGE_FEED_URIS
var set.
For this test, the runtime-test module is being used, which is a
selftest module but runs a testimage command. The var and test
environment were set in runtime-perf.py and the actual test is
done in a new testcase added to meta-selftest layer.
=====
[YOCTO #10872]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
package.bbclass: Add SKIP_FILEDEPS to list of package specific variables
Changes to SKIP_FILEDEPS should change the sstate checksum. To make
that happen, it needs to be listed in the list of package specific
variables, therefore add it.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Thu, 16 Mar 2017 10:13:26 +0000 (03:13 -0700)]
runqemu: only boot ramfs when specified
This can fix a problem:
IMAGE_FSTYPES += "iso"
$ bitbake core-image-minimal
$ runqemu qemux86
It may boot core-image-minimal-initramfs rather than core-image-minimal, this
is not what we want usually. This patch makes it avoid booting ramfs when there
are other choices, or when it is specified, for example, "runqemu qemux86 ramfs"
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 16 Mar 2017 09:09:43 +0000 (22:09 +1300)]
packagegroup-core-lsb: avoid rebuilding when changing layer config
It's regrettable that code in here is referring to BBFILE_COLLECTIONS,
but it is, and the result is that this packagegroup will rebuild simply
by adding or removing a layer which may be completely unrelated to
whether you've got meta-qt4 or not. Add BBFILE_COLLECTIONS to
vardepsexclude for the function to avoid this. (This was flagged up when
testing the new yocto-compat-layer script - it understandably but
undesirably reports it as a change caused by a layer).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jussi Kukkonen [Thu, 16 Mar 2017 09:15:38 +0000 (11:15 +0200)]
gstreamer1.0-vaapi: Remove unused patch
This patch has seemingly never been applied in the recipe (even when
it lived in meta-intel). I don't think we should have unused patches
in the repo: If the patch is useful it could be reintroduced so that
the binaries are packaged into a separate package.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
